diff options
4 files changed, 168 insertions, 0 deletions
diff --git a/games/mupen64plus-input-raphnetraw/README b/games/mupen64plus-input-raphnetraw/README new file mode 100644 index 000000000000..b8fd9e8fe87f --- /dev/null +++ b/games/mupen64plus-input-raphnetraw/README @@ -0,0 +1,35 @@ +mupen64plus plugin that uses the direct controller access feature +offered by raphnet's N64 to USB adapters to let the emulated game +communicate with the controllers directly. + +Advantages: + * No calibration required. As the game talks to the controller + directly, it reads exactly the same axis values it would in a + non-emulated setup. In other words, the controller works, responds + and feels exactly as it would in real life. + * Low latency. When the game must read the controller, the request is + forwarded directly to the controller by the adapter. The later + immediately returns the controller's answer to the game. + * Expansion accessory support without emulator configuration. Insert + the accessory and you're good to go! + +Supported accessories: + * Rumble pak + * Controller pak (Memory pak)[1] + * Transfer pak[1] + * Bio sensor + +Support for peripherals other than controllers. + * N64 mouse (tested) + * VRU (confirmed by users, requires special ports1_4 version of the + plugin)[1] + * N64 Keyboard (not confirmed) + +Supported adapters: + * N64 to USB adapter - V3 + * Dual N64 controller to USB adapter + * N64/Gamecube to USB adapter - V3 + +[1] When accessories transfer a lot of data, such as a Controller Pak, + Transfer Pak or VRU, there are audio issues (small pauses) and + temporary game slow downs. diff --git a/games/mupen64plus-input-raphnetraw/mupen64plus-input-raphnetraw.SlackBuild b/games/mupen64plus-input-raphnetraw/mupen64plus-input-raphnetraw.SlackBuild new file mode 100644 index 000000000000..c565f671756c --- /dev/null +++ b/games/mupen64plus-input-raphnetraw/mupen64plus-input-raphnetraw.SlackBuild @@ -0,0 +1,104 @@ +#!/bin/bash + +# Slackware build script for mupen64plus-input-raphnetraw + +# Copyright 2023 Steven Voges <Oregon, USA> +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +cd $(dirname $0) ; CWD=$(pwd) + +PRGNAM=mupen64plus-input-raphnetraw +VERSION=${VERSION:-20210226_8611241} +SRCVER=${SRCVER:-86112413e98a8648edb11d199673cc24d5799af8} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} +PKGTYPE=${PKGTYPE:-tgz} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i586 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then + echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE" + exit 0 +fi + +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +elif [ "$ARCH" = "aarch64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$SRCVER +tar xvf $CWD/$PRGNAM-$SRCVER.tar.gz +cd $PRGNAM-$SRCVER +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ + -o -perm 511 \) -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + +sed -i "43d" src/plugin_front.c + +echo "-------- Building input-raphnetraw plugin --------" +make -C projects/unix clean $@ +make -C projects/unix all $@ +echo "-------- Installing input-raphnetraw plugin --------" +install -Dm 755 projects/unix/$PRGNAM.so $PKG/usr/lib$LIBDIRSUFFIX/mupen64plus/$PRGNAM.so + +find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a \ + COPYING LICENSES README.md RELEASE \ + $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE diff --git a/games/mupen64plus-input-raphnetraw/mupen64plus-input-raphnetraw.info b/games/mupen64plus-input-raphnetraw/mupen64plus-input-raphnetraw.info new file mode 100644 index 000000000000..c69f9305e9fa --- /dev/null +++ b/games/mupen64plus-input-raphnetraw/mupen64plus-input-raphnetraw.info @@ -0,0 +1,10 @@ +PRGNAM="mupen64plus-input-raphnetraw" +VERSION="20210226_8611241" +HOMEPAGE="https://www.raphnet-tech.com/products/raphnetraw/index.php" +DOWNLOAD="https://github.com/raphnet/mupen64plus-input-raphnetraw/archive/86112413e98a8648edb11d199673cc24d5799af8/mupen64plus-input-raphnetraw-86112413e98a8648edb11d199673cc24d5799af8.tar.gz" +MD5SUM="32f386e8e67972f8657f27a86f178a39" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +REQUIRES="hidapi mupen64plus" +MAINTAINER="Steven Voges" +EMAIL="svoges.sbo@gmail.com" diff --git a/games/mupen64plus-input-raphnetraw/slack-desc b/games/mupen64plus-input-raphnetraw/slack-desc new file mode 100644 index 000000000000..684bef74557f --- /dev/null +++ b/games/mupen64plus-input-raphnetraw/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. +# Line up the first '|' above the ':' following the base package name, and +# the '|' on the right side marks the last column you can put a character in. +# You must make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +mupen64plus-input-raphnetraw: mupen64plus-input-raphnetraw (Input plugin for mupen64plus) +mupen64plus-input-raphnetraw: +mupen64plus-input-raphnetraw: mupen64plus plugin to let the game communicate with the controllers +mupen64plus-input-raphnetraw: directly. +mupen64plus-input-raphnetraw: +mupen64plus-input-raphnetraw: Homepage: https://www.raphnet-tech.com/products/raphnetraw/index.php +mupen64plus-input-raphnetraw: +mupen64plus-input-raphnetraw: +mupen64plus-input-raphnetraw: +mupen64plus-input-raphnetraw: +mupen64plus-input-raphnetraw: |