6 files changed, 0 insertions, 221 deletions
diff --git a/system/pcp/README b/system/pcp/README
deleted file mode 100644
index bbb76d97e4754..0000000000000
--- a/system/pcp/README
+++ /dev/null
@@ -1,9 +0,0 @@
-Performance Co-Pilot (PCP) provides a framework and services to support 
-system-level performance monitoring and management. It presents a unifying 
-abstraction for all of the performance data in a system, and many tools for 
-interrogating, retrieving and processing that data PCP is a feature-rich, 
-mature, extensible, cross-platform toolkit supporting both live and 
-retrospective analysis.  The distributed PCP architecture makes it especially 
-useful for those seeking centralized monitoring of distributed processing.
-
-See README.SLACKWARE for post-install setup information.
diff --git a/system/pcp/README.SLACKWARE b/system/pcp/README.SLACKWARE
deleted file mode 100644
index 03f064c48259e..0000000000000
--- a/system/pcp/README.SLACKWARE
+++ /dev/null
@@ -1,52 +0,0 @@
-The init scripts are not prefixed with "rc." (e.g. rc.pcp) due to the fact
-that several documentation files and other supporting files used by pcp
-expect them without that prefix, and the process of fixing those files is
-a bit too maintenance-intensive and error-prone to bother.
-
-/etc/rc.d/pcp: 
-	starts all the agents and daemons for collecting the info from 
-	various host monitoring 
-
-/etc/rc.d/pmie:
-	starts all daemons for evaluating the rules based on the exported 
-	PCP metrics (usually for triggering particular events)
-
-/etc/rc.d/pmproxy:
-	starts proxy daemon for PCP 
-
-You will need to add the following bits to /etc/rc.d/rc.local and make sure
-the relevant init scripts have executable permissions:
-
-	# Start pcp:
-	if [ -x /etc/rc.d/pcp ]; then
-	  /etc/rc.d/pcp start
-	fi
-	
-	# Start pmie
-	if [ -x /etc/rc.d/pmie ]; then
-	  /etc/rc.d/pmie start
-	fi
-
-	# Start pmproxy
-	if [ -x /etc/rc.d/pmproxy ]; then
-	  /etc/rc.d/pmproxy start
-	fi
-
-You will also need to add the following to /etc/rc.d/rc.local_shutdown:
-
-	# Stop pcp:
-	if [ -x /etc/rc.d/pcp ]; then
-	  /etc/rc.d/pcp stop
-	fi
-	
-	# Stop pmie
-	if [ -x /etc/rc.d/pmie ]; then
-	  /etc/rc.d/pmie stop
-	fi
-
-	# Stop pmproxy
-	if [ -x /etc/rc.d/pmproxy ]; then
-	  /etc/rc.d/pmproxy stop
-	fi
-
-
diff --git a/system/pcp/doinst.sh b/system/pcp/doinst.sh
deleted file mode 100644
index 9eada9da8162b..0000000000000
--- a/system/pcp/doinst.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-# Keep same perms on pcp.new:
-if [ -e etc/rc.d/pcp ]; then
-  cp -a etc/rc.d/pcp etc/rc.d/pcp.new.incoming
-  cat etc/rc.d/pcp.new > etc/rc.d/pcp.new.incoming
-  mv etc/rc.d/pcp.new.incoming etc/rc.d/pcp.new
-fi
-# Keep same perms on pmie.new:
-if [ -e etc/rc.d/pmie ]; then
-  cp -a etc/rc.d/pmie etc/rc.d/pmie.new.incoming
-  cat etc/rc.d/pmie.new > etc/rc.d/pmie.new.incoming
-  mv etc/rc.d/pmie.new.incoming etc/rc.d/pmie.new
-fi
-# Keep same perms on pmproxy.new:
-if [ -e etc/rc.d/pmproxy ]; then
-  cp -a etc/rc.d/pmproxy etc/rc.d/rc.pmproxy.new.incoming
-  cat etc/rc.d/pmproxy.new > etc/rc.d/pmproxy.new.incoming
-  mv etc/rc.d/pmproxy.new.incoming etc/rc.d/pmproxy.new
-fi
-
-config etc/rc.d/pcp.new
-config etc/rc.d/pmie.new
-config etc/rc.d/pmproxy.new
-config etc/pcp.conf.new
-
diff --git a/system/pcp/pcp.SlackBuild b/system/pcp/pcp.SlackBuild
deleted file mode 100644
index 168c13883223e..0000000000000
--- a/system/pcp/pcp.SlackBuild
+++ /dev/null
@@ -1,94 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for pcp
-
-# Roman Revyakin <rrevyakin@aconex.com> 
-# ver 1.1 2009-10-06 
-# Much modification by Robby Workman <rworkman@slackbuilds.org>
-
-PRGNAM=pcp
-VERSION=2.9.2
-ARCH=${ARCH:-i486}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-SRC_VERSION=${VERSION}-1
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$SRC_VERSION.src.tar.gz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-chmod -R a-s,u+w,go+r-w .
-
-autoconf
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --datadir=/usr/share/$PRGNAM \
-  --docdir=/usr/doc/$PRGNAM-$VERSION \
-  --includedir=/usr/include/$PRGNAM \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --localstatedir=/var/lib/pcp \
-  --sysconfdir=/etc \
-  --mandir=/usr/man \
-  --build=$ARCH-slackware-linux
-
-# This should make the docs and init scripts go to the correct place
-sed -i "s%=/usr/doc%=/usr/doc/$PRGNAM-$VERSION%g" src/include/pcp.conf
-sed -i "s%=/etc/rc.d/init.d%=/etc/rc.d%g" src/include/pcp.conf
-
-make
-make install DIST_ROOT=$PKG
-
-# Don't clobber the config file and init scripts on upgrades
-# We'll leave them without the "rc." naming prefix since lots of docs and
-# other support files depend on them named without it
-mv $PKG/etc/pcp.conf $PKG/etc/pcp.conf.new
-mv $PKG/etc/rc.d/pcp $PKG/etc/rc.d/pcp.new
-mv $PKG/etc/rc.d/pmie $PKG/etc/rc.d/pmie.new
-mv $PKG/etc/rc.d/pmproxy $PKG/etc/rc.d/pmproxy.new
-
-# Install the init scripts non-executable by default
-chmod 0644 $PKG/etc/rc.d/*
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-)
-
-# Add the build script and postinstall setup doc to the package docs
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/pcp/pcp.info b/system/pcp/pcp.info
deleted file mode 100644
index cbcbfabc38b1d..0000000000000
--- a/system/pcp/pcp.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="pcp"
-VERSION="2.9.2"
-HOMEPAGE="http://oss.sgi.com/projects/pcp/index.html"
-DOWNLOAD="ftp://oss.sgi.com/www/projects/pcp/download/pcp-2.9.2-1.src.tar.gz"
-MD5SUM="06c9882c7805ec4c61173edb55d06e9a"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-MAINTAINER="Roman Revyakin"
-EMAIL="rrevyakin@aconex.com"
-APPROVED="rworkman"
diff --git a/system/pcp/slack-desc b/system/pcp/slack-desc
deleted file mode 100644
index 06b39de021a76..0000000000000
--- a/system/pcp/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-   |-----handy-ruler------------------------------------------------------|
-pcp: PCP (Performance Co-Pilot)
-pcp:
-pcp: Performance Co-Pilot (PCP) provides a framework and services to
-pcp: support system-level performance monitoring and management. 
-pcp: It presents a unifying abstraction for all of the performance data
-pcp: in a system, and many tools for interrogating, retrieving and 
-pcp: processing that data.
-pcp: PCP is a feature-rich, mature, extensible, cross-platform toolkit
-pcp: supporting both live and retrospective analysis.
-pcp: The distributed PCP architecture makes it especially useful for those
-pcp: seeking centralized monitoring of distributed processing.