5 files changed, 164 insertions, 0 deletions
diff --git a/network/reaver/README b/network/reaver/README
new file mode 100644
index 0000000000000..c7d75af9effcb
--- /dev/null
+++ b/network/reaver/README
@@ -0,0 +1,11 @@
+Reaver implements a brute force attack against Wifi Protected Setup (WPS)
+registrar PINs in order to recover WPA/WPA2 passphrases, as described in
+http://sviehb.files.wordpress.com/2011/12/viehboeck_wps.pdf.
+
+Reaver has been designed to be a robust and practical attack against WPS, and
+has been tested against a wide variety of access points and WPS
+implementations.
+
+On average Reaver will recover the target AP's plain text WPA/WPA2 passphrase
+in 4-10 hours, depending on the AP. In practice, it will generally take half
+this time to guess the correct WPS pin and recover the passphrase.
diff --git a/network/reaver/doinst.sh b/network/reaver/doinst.sh
new file mode 100644
index 0000000000000..d62794208e2ae
--- /dev/null
+++ b/network/reaver/doinst.sh
@@ -0,0 +1,14 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/reaver/reaver.db.new
diff --git a/network/reaver/reaver.SlackBuild b/network/reaver/reaver.SlackBuild
new file mode 100644
index 0000000000000..fc9841b984135
--- /dev/null
+++ b/network/reaver/reaver.SlackBuild
@@ -0,0 +1,110 @@
+#!/bin/sh
+
+# Slackware build script for reaver.
+
+# Copyright 2012-2013 Marco Bonetti <sid77@slackware.it>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PRGNAM=reaver
+VERSION=${VERSION:-1.3}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+DOCS="../docs/LICENSE ../docs/README"
+
+# LIBDIRSUFFIX is not strictly needed, I'll leave it here for future
+# improvements
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+# sqlite3 requires -ldl in order to build against it
+SLKCFLAGS="$SLKCFLAGS -ldl"
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# one more directory
+cd src
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --build=$ARCH-slackware-linux
+
+make
+# make install is b0rked
+mkdir -p $PKG/usr/sbin
+install -o 0 -g 0 -m 0755 walsh $PKG/usr/sbin/walsh
+install -o 0 -g 0 -m 0755 reaver $PKG/usr/sbin/reaver
+# not really sure how to handle future reaver.db updates
+mkdir -p $PKG/etc/reaver
+install -o 0 -g 0 -m 0644 reaver.db $PKG/etc/reaver/reaver.db.new
+mkdir -p $PKG/usr/man/man1
+install -o 0 -g 0 -m 0644 ../docs/reaver.1.gz $PKG/usr/man/man1/reaver.1.gz
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/reaver/reaver.info b/network/reaver/reaver.info
new file mode 100644
index 0000000000000..1d2545b55a4bf
--- /dev/null
+++ b/network/reaver/reaver.info
@@ -0,0 +1,10 @@
+PRGNAM="reaver"
+VERSION="1.3"
+HOMEPAGE="https://code.google.com/p/reaver-wps/"
+DOWNLOAD="https://reaver-wps.googlecode.com/files/reaver-1.3.tar.gz"
+MD5SUM="6ec7dbb11b67e1b4a20f2ceba5f69547"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Marco Bonetti"
+EMAIL="sid77@slackware.it"
+APPROVED="Erik Hanson"
diff --git a/network/reaver/slack-desc b/network/reaver/slack-desc
new file mode 100644
index 0000000000000..361dea6850c4f
--- /dev/null
+++ b/network/reaver/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler-------------------------------------------------------|
+reaver: reaver (brute force attack against Wifi Protected Setup)
+reaver:
+reaver: Reaver implements a brute force attack against Wifi Protected Setup
+reaver: (WPS) registrar PINs in order to recover WPA/WPA2 passphrases.
+reaver:
+reaver:
+reaver:
+reaver:
+reaver:
+reaver:
+reaver: