aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--network/ilbc/README4
-rw-r--r--network/ilbc/configure70
-rw-r--r--network/ilbc/extract-code.sh81
-rw-r--r--network/ilbc/gips_iLBClicense.pdfbin47033 -> 0 bytes
-rw-r--r--network/ilbc/ilbc.SlackBuild83
-rw-r--r--network/ilbc/ilbc.info8
-rw-r--r--network/ilbc/slack-desc19
7 files changed, 0 insertions, 265 deletions
diff --git a/network/ilbc/README b/network/ilbc/README
deleted file mode 100644
index bca15d2b9b181..0000000000000
--- a/network/ilbc/README
+++ /dev/null
@@ -1,4 +0,0 @@
-iLBC (internet Low Bitrate Codec) is a speech codec suitable for robust voice
-communication over IP, and is designed for narrow band speech. The iLBC
-codec enables graceful speech quality degradation in the case of lost frames,
-which occurs in connection with lost or delayed IP packets.
diff --git a/network/ilbc/configure b/network/ilbc/configure
deleted file mode 100644
index 5efa4417fb8f7..0000000000000
--- a/network/ilbc/configure
+++ /dev/null
@@ -1,70 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008 Mauro Giachero (mauro dot giachero at gmail dot com)
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Prepare iLBC build environment
-
-set -e
-
-# [1/2] Prepare some basic documentation
-cat >COPYING <<EOF
-The iLBC license is contained in gips_iLBClicense-1.pdf.
-
-If not locally available, you can fetch it from
- http://www.ilbcfreeware.org/documentation/gips_iLBClicense.pdf
-EOF
-
-# [2/2] Create a simple ilbc Makefile.
-SOURCES=`echo *.c`
-
-cat >Makefile <<EOF
-NAME = ilbc
-
-LIBNAME = lib\$(NAME).so
-SOURCES = $SOURCES
-OBJECTS = \$(SOURCES:%.c=%.o)
-
-CFLAGS = $CFLAGS
-
-DESTDIR ?=
-
-.PHONY: all install clean distclean
-
-all: \$(LIBNAME)
-
-\$(LIBNAME): \$(OBJECTS)
- \$(CC) -lm -shared -o \$(LIBNAME) \$(OBJECTS)
-
-%.o: %.c
- \$(CC) \$(CFLAGS) -c -o \$@ \$<
-
-clean:
- rm -f \$(LIBNAME) \$(OBJECTS)
-
-distclean: clean
- rm -f Makefile
-
-install:
- mkdir -p \$(DESTDIR)/usr/lib
- cp \$(LIBNAME) \$(DESTDIR)/usr/lib
- mkdir -p \$(DESTDIR)/usr/include/\$(NAME)
- cp *.h \$(DESTDIR)/usr/include/\$(NAME)
-EOF
diff --git a/network/ilbc/extract-code.sh b/network/ilbc/extract-code.sh
deleted file mode 100644
index 58202d1fe7a5e..0000000000000
--- a/network/ilbc/extract-code.sh
+++ /dev/null
@@ -1,81 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008 Mauro Giachero (mauro dot giachero at gmail dot com)
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# This script extracts the source code files from rfc3951.txt, which
-# should be fed from stdin.
-# The first command line parameter, if provided, is used as the
-# extraction folder.
-
-set -e
-
-FILENAME=""
-
-# Create the extraction folder
-if [ "$1" != "" ] ; then
- mkdir -p "$1"
- cd "$1"
-fi
-
-# Jump to appendix A
-while :; do
- if ! IFS= read LINE ; then
- echo "Error: file ended prematurely." >&2
- exit 1
- fi
-
- if [ "$LINE" = "APPENDIX A. Reference Implementation" ]; then
- break
- fi
-done
-
-# Read the source code
-while :; do
- if ! IFS= read LINE ; then
- break
- fi
-
- if [ "${LINE:0:2}" = "A." ]; then # Source file begin
- FILENAME=`echo ${LINE:6}`
- if [ -e $FILENAME ]; then
- echo "Error: file '$FILENAME' already exists!"
- exit 2
- fi
- echo "$FILENAME"
- elif [ "${LINE:0:8}" = "Andersen" ]; then # Footer
- continue
- elif [ "${LINE:0:3}" = "RFC" ]; then # Header
- continue
- elif [ "$LINE" = "Authors' Addresses" ]; then # Appendix end
- break
- elif [ "$FILENAME" != "" ]; then # File content
- echo "$LINE" >>$FILENAME
- fi
-done
-
-# One extra check, just in case
-if [ "$FILENAME" = "" ]; then
- echo "Error: no source file found!"
- exit 3
-fi
-
-# Apparently everything went ok
-exit 0
diff --git a/network/ilbc/gips_iLBClicense.pdf b/network/ilbc/gips_iLBClicense.pdf
deleted file mode 100644
index b3a40c6ba758b..0000000000000
--- a/network/ilbc/gips_iLBClicense.pdf
+++ /dev/null
Binary files differ
diff --git a/network/ilbc/ilbc.SlackBuild b/network/ilbc/ilbc.SlackBuild
deleted file mode 100644
index 54de52d37de35..0000000000000
--- a/network/ilbc/ilbc.SlackBuild
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for ilbc
-
-# Copyright 2008 Mauro Giachero (mauro dot giachero at gmail dot com)
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=ilbc
-VERSION=${VERSION:-rfc3951}
-ARCH=${ARCH:-i486}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
- SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-elif [ "$ARCH" = "i686" ]; then
- SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2 -fPIC"
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-# Code extraction is peculiar...
-sh $CWD/extract-code.sh $PRGNAM-$VERSION < $CWD/$VERSION.txt
-cp $CWD/configure $PRGNAM-$VERSION
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure
-
-make
-make install DESTDIR=$PKG
-
-( cd $PKG
- find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a COPYING $PKG/usr/doc/$PRGNAM-$VERSION
-for i in $PRGNAM.SlackBuild configure extract-code.sh gips_iLBClicense.pdf ;
- do cat $CWD/$i > $PKG/usr/doc/$PRGNAM-$VERSION/$i ;
-done
-chown -R root:root $PKG/usr/doc/
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/network/ilbc/ilbc.info b/network/ilbc/ilbc.info
deleted file mode 100644
index ee553727ba697..0000000000000
--- a/network/ilbc/ilbc.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM="ilbc"
-VERSION="rfc3951"
-HOMEPAGE="http://www.ilbcfreeware.org/"
-DOWNLOAD="http://www.ietf.org/rfc/rfc3951.txt"
-MD5SUM="984affd9bf2053064d744a2ccec82289"
-MAINTAINER="Mauro Giachero"
-EMAIL="mauro dot giachero at gmail dot com"
-APPROVED="rworkman"
diff --git a/network/ilbc/slack-desc b/network/ilbc/slack-desc
deleted file mode 100644
index a6c0a2801d535..0000000000000
--- a/network/ilbc/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in. You must make
-# exactly 11 lines for the formatting to be correct. It's also customary to
-# leave one space after the ':'.
-
- |-----handy-ruler------------------------------------------------------|
-ilbc: iLBC (internet Low Bitrate Codec)
-ilbc:
-ilbc: iLBC is a speech codec suitable for robust voice communication over
-ilbc: IP, and is designed for narrow band speech. The iLBC codec enables
-ilbc: graceful speech quality degradation in the case of lost frames, which
-ilbc: occurs in connection with lost or delayed IP packets.
-ilbc: iLBC is free for non-commercial use. Please read the full license
-ilbc: for details and how to use iLBC in commercial applications.
-ilbc:
-ilbc: Homepage: http://www.ilbcfreeware.org/
-ilbc: