diff options
| -rw-r--r-- | graphics/FreeCAD/FreeCAD.SlackBuild | 54 | ||||
| -rw-r--r-- | graphics/FreeCAD/FreeCAD.desktop (renamed from graphics/FreeCAD/files/FreeCAD.desktop) | 0 | ||||
| -rw-r--r-- | graphics/FreeCAD/FreeCAD.info | 14 | ||||
| -rw-r--r-- | graphics/FreeCAD/FreeCAD.xml (renamed from graphics/FreeCAD/files/FreeCAD.xml) | 0 | ||||
| -rw-r--r-- | graphics/FreeCAD/files/freecad-0.13.diff | 2511 | ||||
| -rw-r--r-- | graphics/FreeCAD/no_coin3d_docs.patch (renamed from graphics/FreeCAD/files/no_coin3d_docs.patch) | 0 |
6 files changed, 24 insertions, 2555 deletions
diff --git a/graphics/FreeCAD/FreeCAD.SlackBuild b/graphics/FreeCAD/FreeCAD.SlackBuild index 3d860cf4ddc76..35b227e53b966 100644 --- a/graphics/FreeCAD/FreeCAD.SlackBuild +++ b/graphics/FreeCAD/FreeCAD.SlackBuild @@ -21,15 +21,14 @@ # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# revision date: 2013/11/27 +# +# Maintained by David Spencer <baildon.research@googlemail.com> PRGNAM=FreeCAD -VERSION=${VERSION:-0.13.1830} -BUILD=${BUILD:-2} +VERSION=${VERSION:-0.15} +BUILD=${BUILD:-1} TAG=${TAG:-_SBo} -SRCNAM=freecad if [ -z "$ARCH" ]; then case "$( uname -m )" in @@ -63,56 +62,37 @@ set -e rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP -rm -rf $SRCNAM-$VERSION -tar xvf $CWD/$SRCNAM-$VERSION.tar.?z* -cd $SRCNAM-$VERSION +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.gz || tar xvf $CWD/$VERSION.tar.gz +cd $PRGNAM-$VERSION chown -R root:root . find -L . \ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ -o -perm 511 \) -exec chmod 755 {} \; -o \ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ - -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; # no downloads allowed during the build -patch -p1 < $CWD/files/no_coin3d_docs.patch - -# thanks to archlinux for these fixes -# compatibility issues with OCC-6.6 -for i in $( grep -Rl "BRepTools::OuterShell" * ) -do - sed -e "s|BRepTools|BRepClass3d|g" -i "$i" -done - -# these patch contain some code taken from upstream -# thanks to cbuehler -patch -p1 -i $CWD/files/freecad-0.13.diff +patch -p1 < $CWD/no_coin3d_docs.patch mkdir build cd build cmake \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS -Wno-cpp" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_INSTALL_PREFIX=/opt/$PRGNAM \ - -DRESOURCEDIR=/opt/$PRGNAM/share/data \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - -DMAN_INSTALL_DIR=/usr/man \ -DDOCDIR=/usr/doc/$PRGNAM-$VERSION \ - -DOCC_INCLUDE_DIR=/usr/include/OpenCASCADE \ - -DOCC_LIBRARY=/usr/lib${LIBDIRSUFFIX} \ + -DOCC_INCLUDE_DIR:PATH=/opt/OpenCASCADE/inc \ + -DOCC_LIBRARY:PATH=/opt/OpenCASCADE/lib${LIBDIRSUFFIX} \ + -DCMAKE_SHARED_LINKER_FLAGS:STRING="-L/opt/OpenCASCADE/lib${LIBDIRSUFFIX}" \ + -DRESOURCEDIR=/opt/$PRGNAM/share/data \ -DFREECAD_USE_EXTERNAL_PIVY:BOOL=ON \ -DCMAKE_BUILD_TYPE=Release .. - - make V=1 + make make install DESTDIR=$PKG cd .. -# build the qt plugin -( cd src/Tools/plugins/widget - qmake plugin.pro - make - install -m 0755 -D libFreeCAD_widgets.so \ - $PKG/usr/lib$LIBDIRSUFFIX/qt4/plugins/designer/libFreeCAD_widgets.so ) - # create links in /usr/bin mkdir -p $PKG/usr/bin ln -s /opt/FreeCAD/bin/FreeCADCmd $PKG/usr/bin/FreeCADCmd @@ -124,8 +104,8 @@ find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | gr # Copy icon, desktop file and mime info mkdir -p $PKG/usr/share/applications $PKG/usr/share/pixmaps $PKG/usr/share/mime/packages cp $PKG/opt/$PRGNAM/data/freecad.xpm $PKG/usr/share/pixmaps/ -cat $CWD/files/$PRGNAM.desktop > $PKG/usr/share/applications/$PRGNAM.desktop -cat $CWD/files/$PRGNAM.xml > $PKG/usr/share/mime/packages/$PRGNAM.xml +cat $CWD/$PRGNAM.desktop > $PKG/usr/share/applications/$PRGNAM.desktop +cat $CWD/$PRGNAM.xml > $PKG/usr/share/mime/packages/$PRGNAM.xml mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION cp -a \ diff --git a/graphics/FreeCAD/files/FreeCAD.desktop b/graphics/FreeCAD/FreeCAD.desktop index 07d2a8c7fd0ca..07d2a8c7fd0ca 100644 --- a/graphics/FreeCAD/files/FreeCAD.desktop +++ b/graphics/FreeCAD/FreeCAD.desktop diff --git a/graphics/FreeCAD/FreeCAD.info b/graphics/FreeCAD/FreeCAD.info index 80a8b190c69f8..c5ba28615e60b 100644 --- a/graphics/FreeCAD/FreeCAD.info +++ b/graphics/FreeCAD/FreeCAD.info @@ -1,10 +1,10 @@ PRGNAM="FreeCAD" -VERSION="0.13.1830" -HOMEPAGE="http://free-cad.sourceforge.net/" -DOWNLOAD="http://downloads.sourceforge.net/free-cad/freecad-0.13.1830.tar.gz" -MD5SUM="13b8fddef12f5f8419dcf4adbab596eb" +VERSION="0.15" +HOMEPAGE="http://www.freecadweb.org/" +DOWNLOAD="https://github.com/FreeCAD/FreeCAD/archive/0.15.tar.gz" +MD5SUM="1a13204cc3c785c4111e1649eac6025b" DOWNLOAD_x86_64="" MD5SUM_x86_64="" -REQUIRES="OpenCASCADE Pivy xerces-c" -MAINTAINER="Niels Horn" -EMAIL="niels.horn@gmail.com" +REQUIRES="OpenCASCADE Pivy matplotlib pyside pyside-tools shiboken xerces-c" +MAINTAINER="David Spencer" +EMAIL="baildon.research@googlemail.com" diff --git a/graphics/FreeCAD/files/FreeCAD.xml b/graphics/FreeCAD/FreeCAD.xml index 9a27f098b7a58..9a27f098b7a58 100644 --- a/graphics/FreeCAD/files/FreeCAD.xml +++ b/graphics/FreeCAD/FreeCAD.xml diff --git a/graphics/FreeCAD/files/freecad-0.13.diff b/graphics/FreeCAD/files/freecad-0.13.diff deleted file mode 100644 index a2f8859bcd355..0000000000000 --- a/graphics/FreeCAD/files/freecad-0.13.diff +++ /dev/null @@ -1,2511 +0,0 @@ -diff -Naur freecad-0.13.1830.orig/cMake/FindCoin3DDoc.cmake freecad-0.13.1830/cMake/FindCoin3DDoc.cmake ---- freecad-0.13.1830.orig/cMake/FindCoin3DDoc.cmake 2013-10-25 18:49:34.058998056 +0200 -+++ freecad-0.13.1830/cMake/FindCoin3DDoc.cmake 2013-10-25 18:49:59.452193823 +0200 -@@ -21,7 +21,7 @@ - ELSE(APPLE)
- # Unix systems
- find_path(COIN3D_DOC_PATH index.html
-- /usr/share/doc/libcoin60-doc/html
-+ /usr/share/doc/coin/html
- )
- IF( EXISTS ${COIN3D_DOC_PATH})
- message(STATUS "Coin3D doc is installed")
-diff -Naur freecad-0.13.1830.orig/cMake/FreeCadMacros.cmake freecad-0.13.1830/cMake/FreeCadMacros.cmake ---- freecad-0.13.1830.orig/cMake/FreeCadMacros.cmake 2013-10-25 18:49:34.058998056 +0200 -+++ freecad-0.13.1830/cMake/FreeCadMacros.cmake 2013-10-25 18:49:59.452193823 +0200 -@@ -167,70 +167,6 @@ - #
- #endmacro(qt4_wrap_ui)
-
--
--# This is a special version of the built in macro qt4_add_resources that generates .cpp files
--#
--#macro(fc_add_resources outfiles )
--# #QT4_EXTRACT_OPTIONS(rcc_files rcc_options ${ARGN})
--# set(ARGN )
--# foreach (it ${rcc_files})
--# get_filename_component(outfilename ${it} NAME_WE)
--# get_filename_component(infile ${it} ABSOLUTE)
--# get_filename_component(rc_path ${infile} PATH)
--# set(outfile ${CMAKE_CURRENT_BINARY_DIR}/qrc_${outfilename}.cpp)
--# # parse file for dependencies
--# # all files are absolute paths or relative to the location of the qrc file
--# file(READ "${infile}" _RC_FILE_CONTENTS)
--# string(REGEX MATCHALL "<file[^<]+" _RC_FILES "${_RC_FILE_CONTENTS}")
--# set(_RC_DEPENDS)
--# foreach(_RC_FILE ${_RC_FILES})
--# string(REGEX REPLACE "^<file[^>]*>" "" _RC_FILE "${_RC_FILE}")
--# string(REGEX MATCH "^/|([A-Za-z]:/)" _ABS_PATH_INDICATOR "${_RC_FILE}")
--# if(NOT _ABS_PATH_INDICATOR)
--# set(_RC_FILE "${rc_path}/${_RC_FILE}")
--# endif(NOT _ABS_PATH_INDICATOR)
--# set(_RC_DEPENDS ${_RC_DEPENDS} "${_RC_FILE}")
--# endforeach(_RC_FILE)
--# add_custom_command(OUTPUT ${outfile}
--# COMMAND ${QT_RCC_EXECUTABLE}
--# ARGS ${rcc_options} -name ${outfilename} -o ${outfile} ${infile}
--# MAIN_DEPENDENCY ${infile}
--# DEPENDS ${_RC_DEPENDS})
--# set(${outfiles} ${${outfiles}} ${outfile})
--# endforeach (it)
--#endmacro(fc_add_resources)
--
--MACRO (fc_add_resources outfiles )
-- QT4_EXTRACT_OPTIONS(rcc_files rcc_options ${ARGN})
--
-- FOREACH (it ${rcc_files})
-- GET_FILENAME_COMPONENT(outfilename ${it} NAME_WE)
-- GET_FILENAME_COMPONENT(infile ${it} ABSOLUTE)
-- GET_FILENAME_COMPONENT(rc_path ${infile} PATH)
-- SET(outfile ${CMAKE_CURRENT_BINARY_DIR}/qrc_${outfilename}.cpp)
-- # parse file for dependencies
-- # all files are absolute paths or relative to the location of the qrc file
-- FILE(READ "${infile}" _RC_FILE_CONTENTS)
-- STRING(REGEX MATCHALL "<file[^<]+" _RC_FILES "${_RC_FILE_CONTENTS}")
-- SET(_RC_DEPENDS)
-- FOREACH(_RC_FILE ${_RC_FILES})
-- STRING(REGEX REPLACE "^<file[^>]*>" "" _RC_FILE "${_RC_FILE}")
-- STRING(REGEX MATCH "^/|([A-Za-z]:/)" _ABS_PATH_INDICATOR "${_RC_FILE}")
-- IF(NOT _ABS_PATH_INDICATOR)
-- SET(_RC_FILE "${rc_path}/${_RC_FILE}")
-- ENDIF(NOT _ABS_PATH_INDICATOR)
-- SET(_RC_DEPENDS ${_RC_DEPENDS} "${_RC_FILE}")
-- ENDFOREACH(_RC_FILE)
-- ADD_CUSTOM_COMMAND(OUTPUT ${outfile}
-- COMMAND ${QT_RCC_EXECUTABLE}
-- ARGS ${rcc_options} -name ${outfilename} -o ${outfile} ${infile}
-- MAIN_DEPENDENCY ${infile}
-- DEPENDS ${_RC_DEPENDS})
-- SET(${outfiles} ${${outfiles}} ${outfile})
-- ENDFOREACH (it)
--
--ENDMACRO (fc_add_resources)
--
- MACRO(ADD_MSVC_PRECOMPILED_HEADER PrecompiledHeader PrecompiledSource SourcesVar)
- IF(MSVC)
- GET_FILENAME_COMPONENT(PrecompiledBasename ${PrecompiledHeader} NAME_WE)
-diff -Naur freecad-0.13.1830.orig/CMakeLists.txt freecad-0.13.1830/CMakeLists.txt ---- freecad-0.13.1830.orig/CMakeLists.txt 2013-10-25 18:49:34.058998056 +0200 -+++ freecad-0.13.1830/CMakeLists.txt 2013-10-25 18:49:59.452193823 +0200 -@@ -314,14 +314,14 @@ - macro(fc_wrap_cpp outfiles ) - # get include dirs - QT4_GET_MOC_FLAGS(moc_flags) -- QT4_EXTRACT_OPTIONS(moc_files moc_options ${ARGN}) -+ QT4_EXTRACT_OPTIONS(moc_files moc_options moc_target ${ARGN}) - # fixes bug 0000585: bug with boost 1.48 - SET(moc_options ${moc_options} -DBOOST_TT_HAS_OPERATOR_HPP_INCLUDED) - - foreach(it ${moc_files}) - get_filename_component(it ${it} ABSOLUTE) - QT4_MAKE_OUTPUT_FILE(${it} moc_ cpp outfile) -- QT4_CREATE_MOC_COMMAND(${it} ${outfile} "${moc_flags}" "${moc_options}") -+ QT4_CREATE_MOC_COMMAND(${it} ${outfile} "${moc_flags}" "${moc_options}" "${moc_target}") - set(${outfiles} ${${outfiles}} ${outfile}) - add_file_dependencies(${it} ${outfile}) - endforeach(it) -diff -Naur freecad-0.13.1830.orig/CMakeLists.txt.orig freecad-0.13.1830/CMakeLists.txt.orig ---- freecad-0.13.1830.orig/CMakeLists.txt.orig 1970-01-01 01:00:00.000000000 +0100 -+++ freecad-0.13.1830/CMakeLists.txt.orig 2013-02-02 18:09:17.000000000 +0100 -@@ -0,0 +1,552 @@ -+project(FreeCAD_trunk) -+set(FREECAD_VERSION "0.13") -+ -+# Needed for salomesmesh -+if(CMAKE_COMPILER_IS_GNUCXX) -+ENABLE_LANGUAGE(Fortran) -+endif(CMAKE_COMPILER_IS_GNUCXX) -+ -+set(PACKAGE_NAME "FreeCAD") -+set(PACKAGE_VERSION_MAJOR "0") -+set(PACKAGE_VERSION_MINOR "12") -+set(PACKAGE_VERSION_PATCH "2237") -+set(PACKAGE_VERSION "${PACKAGE_VERSION_MAJOR}.${PACKAGE_VERSION_MINOR}.${PACKAGE_VERSION_PATCH}") -+set(PACKAGE_STRING "${PACKAGE_NAME} ${PACKAGE_VERSION}") -+ -+cmake_minimum_required(VERSION 2.6.0 FATAL_ERROR) -+ -+# include local modules -+include(AddFileDependencies) -+ -+set(CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cMake") -+ -+ -+if(COMMAND cmake_policy) -+ cmake_policy(SET CMP0003 NEW) -+endif(COMMAND cmake_policy) -+ -+#if(CMAKE_CFG_INTDIR STREQUAL .) -+ # No Debug/Release output paths -+ set(DEBUG_MAIN_OUTPUT_PATH ${CMAKE_BINARY_DIR}/bin) -+ set(RELEASE_MAIN_OUTPUT_PATH ${CMAKE_BINARY_DIR}/bin) -+#else(CMAKE_CFG_INTDIR STREQUAL .) -+# set(DEBUG_MAIN_OUTPUT_PATH ${CMAKE_BINARY_DIR}/src/Main/Debug) -+# set(RELEASE_MAIN_OUTPUT_PATH ${CMAKE_BINARY_DIR}/src/Main/Release) -+#endif(CMAKE_CFG_INTDIR STREQUAL .) -+ -+if(WIN32) -+ set(PLATFORM_CP xcopy /Y /S) -+ set(PLATFORM_MK mkdir) -+else(WIN32) -+ set(PLATFORM_CP cp) -+ set(PLATFORM_MK mkdir -p) -+endif(WIN32) -+ -+ -+# ================================================================================ -+ -+if(CMAKE_COMPILER_IS_GNUCXX) -+ include(cMake/ConfigureChecks.cmake) -+ configure_file(config.h.cmake ${CMAKE_CURRENT_BINARY_DIR}/config.h) -+ add_definitions(-DHAVE_CONFIG_H) -+ add_definitions(-Wno-write-strings) -+ add_definitions(-Wno-deprecated) -+ INCLUDE_DIRECTORIES(${CMAKE_CURRENT_BINARY_DIR}) -+ # get linker errors as soon as possible and not at runtime e.g. for modules -+ if(UNIX) -+ # SET(CMAKE_SHARED_LINKER_FLAGS "-Wl,--no-undefined") -+ endif(UNIX) -+endif(CMAKE_COMPILER_IS_GNUCXX) -+ -+ -+# ================================================================================ -+# Output directories for install target -+ -+if(WIN32) -+ SET(CMAKE_INSTALL_PREFIX ${CMAKE_BINARY_DIR}/install CACHE PATH "Installation root directory") -+else(WIN32) -+ SET(CMAKE_INSTALL_PREFIX "/usr/lib${LIB_SUFFIX}/freecad" CACHE PATH "Installation root directory") -+ SET(INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib") -+endif(WIN32) -+ -+SET(CMAKE_INSTALL_DATADIR data CACHE PATH "Output directory for data and resource files") -+SET(CMAKE_INSTALL_INCLUDEDIR include CACHE PATH "Output directory for header files") -+SET(CMAKE_INSTALL_DOCDIR doc CACHE PATH "Output directory for documentation and license files") -+ -+# used as compiler defines -+SET(RESOURCEDIR "${CMAKE_INSTALL_DATADIR}") -+SET(DOCDIR "${CMAKE_INSTALL_DOCDIR}") -+ -+MESSAGE( STATUS "prefix: ${CMAKE_INSTALL_PREFIX}") -+MESSAGE(STATUS "datadir: ${CMAKE_INSTALL_DATADIR}") -+MESSAGE(STATUS "docdir: ${CMAKE_INSTALL_DOCDIR}") -+MESSAGE(STATUS "includedir: ${CMAKE_INSTALL_INCLUDEDIR}") -+ -+# ============================================================================== -+# == Win32 is default behaviour use the LibPack copied in Source tree ========== -+if(MSVC) -+ OPTION(FREECAD_LIBPACK_USE "Use the LibPack to Build FreeCAD (only Win32 so far)." ON) -+ set(FREECAD_LIBPACK_DIR ${CMAKE_SOURCE_DIR} CACHE PATH "Directory of the FreeCAD LibPack") -+else(MSVC) -+ OPTION(FREECAD_LIBPACK_USE "Use the LibPack to Build FreeCAD (only Win32 so far)." OFF) -+ set(FREECAD_LIBPACK_DIR "" CACHE PATH "Directory of the FreeCAD LibPack") -+endif(MSVC) -+ -+# ============================================================================== -+# == All the options for the build process ============ -+ -+OPTION(FREECAD_BUILD_GUI "Build FreeCAD Gui. Otherwise you have only the command line and the Python import module." ON) -+OPTION(FREECAD_MAINTAINERS_BUILD "Build FreeCAD for Maintainers, with Docu and 3rd party libs. On Windows the Installer is build." OFF) -+OPTION(FREECAD_BUILD_CAM "Build the FreeCAD CAM module and the needed libs, be aware, unfinished code!" OFF) -+OPTION(FREECAD_BUILD_FEM "Build the FreeCAD FEM module, be aware, unfinished code!" ON) -+OPTION(FREECAD_BUILD_SANDBOX "Build the FreeCAD Sandbox module which is only for testing purposes" OFF) -+OPTION(FREECAD_BUILD_TEMPLATE "Build the FreeCAD template module which is only for testing purposes" OFF) -+OPTION(FREECAD_BUILD_DEBIAN "Prepare for a build of a Debian package" OFF) -+OPTION(FREECAD_USE_EXTERNAL_ZIPIOS "Use system installed zipios++ instead of the bundled." OFF) -+OPTION(FREECAD_USE_EXTERNAL_PIVY "Use system installed python-pivy instead of the bundled." OFF) -+if(MSVC) -+OPTION(FREECAD_USE_3DCONNEXION "Use the 3D connexion SDK to support 3d mouse." ON) -+else(MSVC) -+set(FREECAD_USE_3DCONNEXION OFF) -+endif(MSVC) -+ -+# if this is set override some options -+if (FREECAD_BUILD_DEBIAN) -+ set(FREECAD_USE_EXTERNAL_ZIPIOS ON) -+ set(FREECAD_USE_EXTERNAL_PIVY ON) -+endif (FREECAD_BUILD_DEBIAN) -+ -+if (NOT EXISTS ${CMAKE_SOURCE_DIR}/src/zipios++) -+ set(FREECAD_USE_EXTERNAL_ZIPIOS ON) -+endif () -+ -+# ============================================================================== -+ -+if(FREECAD_LIBPACK_USE) -+ # checking for a unique file in LibPack location to make sure the right version of the LibPack is there -+ find_file(FREECAD_LIBPACK_CHECKFILE6X boost_program_options-vc80-mt-gd.lib ${FREECAD_LIBPACK_DIR}/lib ) -+ find_file(FREECAD_LIBPACK_CHECKFILE7X boost_program_options-vc90-mt-gd-1_39.lib ${FREECAD_LIBPACK_DIR}/lib ) -+ find_file(FREECAD_LIBPACK_CHECKFILE8X boost_program_options-vc90-mt-gd-1_48.lib ${FREECAD_LIBPACK_DIR}/lib ) -+ find_file(FREECAD_LIBPACK_CHECKCUSTOM boost_program_options-vc90-mt-gd-1_41.lib ${FREECAD_LIBPACK_DIR}/lib ) -+ IF(FREECAD_LIBPACK_CHECKFILE6X) -+ include(cMake/UseLibPack6x.cmake) -+ set(FREECAD_LIBPACK6 FOUND CACHE STRING "Displays if the libpack has been found") -+ set(FREECAD_LIBPACK7 NOTFOUND CACHE STRING "Displays if the libpack has been found") -+ MARK_AS_ADVANCED(FORCE FREECAD_LIBPACK7) -+ ELSEIF(FREECAD_LIBPACK_CHECKFILE7X) -+ include(cMake/UseLibPack7x.cmake) -+ set(FREECAD_LIBPACK6 NOTFOUND CACHE STRING "Displays if the libpack has been found") -+ MARK_AS_ADVANCED(FORCE FREECAD_LIBPACK6) -+ set(FREECAD_LIBPACK7 FOUND CACHE STRING "Displays if the libpack has been found") -+ ELSEIF(FREECAD_LIBPACK_CHECKFILE8X) -+ include(cMake/UseLibPack8x.cmake) -+ set(FREECAD_LIBPACK6 NOTFOUND CACHE STRING "Displays if the libpack has been found") -+ set(FREECAD_LIBPACK7 NOTFOUND CACHE STRING "Displays if the libpack has been found") -+ set(SWIG_EXECUTABLE ${FREECAD_LIBPACK_DIR}/tools/swigwin-1.3.40/swig.exe) -+ MARK_AS_ADVANCED(FORCE FREECAD_LIBPACK6) -+ set(FREECAD_LIBPACK8 FOUND CACHE STRING "Displays if the libpack has been found") -+ ELSEIF(FREECAD_LIBPACK_CHECKCUSTOM) -+ include(cMake/UseLibPackCustom.cmake) -+ set(FREECAD_LIBPACKX FOUND CACHE STRING "Displays if the libpack has been found") -+ ELSE(FREECAD_LIBPACK_CHECKFILE6X) -+ MARK_AS_ADVANCED(FORCE FREECAD_LIBPACK_CHECKFILE6X FREECAD_LIBPACK_CHECKFILE7X) -+ message(SEND_ERROR "Could not find neither LibPack 6.x nor 7.x in specified location:" ${FREECAD_LIBPACK_DIR}) -+ ENDIF(FREECAD_LIBPACK_CHECKFILE6X) -+ -+# -------------------------------- Swig ---------------------------------- -+ -+ find_package(SWIG) -+ -+ IF(NOT SWIG_FOUND) -+ MESSAGE("SWIG was not found, build no SWIG binding for pivy") -+ ENDIF(NOT SWIG_FOUND) -+ -+else(FREECAD_LIBPACK_USE) -+ -+MARK_AS_ADVANCED(FORCE FREECAD_LIBPACK_CHECKFILE6X FREECAD_LIBPACK_CHECKFILE7X) -+ -+ -+ -+# ================================================================================ -+# == for other OSes search the packages ========================================== -+ -+ -+# -------------------------------- Python -------------------------------- -+ -+ -+ #http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=677598 -+ set(Python_ADDITIONAL_VERSIONS "2.3" "2.4" "2.5" "2.6" "2.7" "2.8" "2.9") -+ find_package(PythonInterp REQUIRED) -+ IF (NOT DEFINED PYTHON_VERSION_STRING) -+ find_package(PythonLibs REQUIRED) -+ ELSE (NOT DEFINED PYTHON_VERSION_STRING) -+ find_package(PythonLibs ${PYTHON_VERSION_STRING} EXACT) -+ ENDIF(NOT DEFINED PYTHON_VERSION_STRING) -+ -+ IF(NOT PYTHONLIBS_FOUND) -+ MESSAGE("Python not found, install python!") -+ ENDIF(NOT PYTHONLIBS_FOUND) -+ -+ -+ -+# -------------------------------- Boost -------------------------------- -+ -+ SET( _boost_TEST_VERSIONS ${Boost_ADDITIONAL_VERSIONS} "1.41.0" "1.39.0" "1.38.0" "1.37.0" -+ "1.36.1" "1.36.0" "1.35.1" "1.35.0" "1.35" "1.34.1" "1.34.0" "1.34" -+ "1.33.1" "1.33.0" "1.33" ) -+ -+ find_package(Boost COMPONENTS filesystem program_options regex signals system thread REQUIRED) -+ -+# -------------------------------- XercesC -------------------------------- -+ -+ find_package(XercesC REQUIRED) -+ -+# -------------------------------- ZLIB -------------------------------- -+ -+ find_package(ZLIB REQUIRED) -+ -+# -------------------------------- OpenCasCade -------------------------------- -+ -+#first, look for OpenCASCADE Community Edition (OCE) -+#if OCE is installed in a nonstandard location, add -DOCE_DIR=/path/to/dir/containing/OCEConfig.cmake -+# when configuring with cmake, i.e. cmake .. -DOCE_DIR=/usr/share/cmake -+ if( NOT DEFINED OCE_DIR ) -+ if( UNIX ) -+ set( OCE_DIR "/usr/local/share/cmake/" ) -+ else() -+ set( OCE_DIR "c:/OCE-0.4.0/share/cmake" ) -+ endif() -+ endif() -+ find_package ( OCE ) -+ if( ${OCE_FOUND} ) -+ message("-- OpenCASCADE Community Edition has been found.") -+ add_definitions ( -DHAVE_CONFIG_H ) -+ set( OCC_LIBRARIES "TKFeat;TKFillet;TKMesh;TKernel;TKG2d;TKG3d;TKMath;TKIGES;TKSTL;TKShHealing;TKXSBase;TKBool;TKBO;TKBRep;TKTopAlgo;TKGeomAlgo;TKGeomBase;TKOffset;TKPrim;TKSTEP;TKSTEPBase;TKSTEPAttr;TKHLR" ) #lib list copied from FreeCAD's FindOpenCasCade.cmake -+ set( OCC_OCAF_LIBRARIES "TKCAF;TKXCAF;TKLCAF;TKXDESTEP;TKXDEIGES" ) #lib list copied from FreeCAD's FindOpenCasCade.cmake -+ set( OCC_INCLUDE_DIR ${OCE_INCLUDE_DIRS} ) -+ set( OCC_FOUND ${OCE_FOUND} ) -+ else() #look for OpenCASCADE -+ find_package(OpenCasCade) -+ IF(NOT OCC_FOUND) -+ MESSAGE("Neither OpenCASCADE Community Edition nor OpenCasCade were found: will not build CAD modules!") -+ ELSE() -+ MESSAGE("-- OpenCASCADE include directory: ${OCC_INCLUDE_PATH}") -+ MESSAGE("-- OpenCASCADE shared libraries directory: ${OCC_LIB_PATH}") -+ ENDIF() -+ endif() -+ -+# -------------------------------- Salome SMESH -------------------------- -+ -+ # Salome SMESH sources are under src/3rdParty now -+ IF(OCC_FOUND) -+ set(SMESH_INCLUDE_DIR ${CMAKE_SOURCE_DIR}/src/3rdParty/salomesmesh/inc) -+ set(SMESH_LIBRARIES -+ StdMeshers -+ #MEFISTO2 -+ SMESH -+ DriverUNV -+ SMESHDS -+ DriverSTL -+ DriverDAT -+ Driver -+ SMDS -+ ) -+ set(SMESH_FOUND TRUE) -+ ENDIF(OCC_FOUND) -+ #find_package(SMESH) -+ #IF(NOT SMESH_FOUND) -+ # MESSAGE("Salome SMESH was not found!") -+ #ENDIF(NOT SMESH_FOUND) -+ -+# -------------------------------- OpenCV -------------------------------- -+ -+ # not needed at the moment -+ #find_package(OpenCV REQUIRED) -+ -+# -------------------------------- Swig ---------------------------------- -+ -+ find_package(SWIG) -+ -+ IF(NOT SWIG_FOUND) -+ MESSAGE("SWIG was not found, build no SWIG binding for pivy") -+ ENDIF(NOT SWIG_FOUND) -+ -+# -------------------------------- Eigen -------------------------------- -+ -+ #find_package(Eigen2) -+ find_package(Eigen3) -+ -+# -------------------------------- ODE ---------------------------------- -+ -+# find_package(ODE) -+ -+# -------------------------------- Qt -------------------------------- -+ -+# sets ${QT_LIBRARIES} -+ -+ SET(QT_MIN_VERSION 4.5.0) -+ set(QT_USE_QTNETWORK TRUE) -+ set(QT_USE_QTXML TRUE) -+ if(FREECAD_BUILD_GUI) -+ set(QT_USE_QTOPENGL TRUE) -+ set(QT_USE_QTSVG TRUE) -+ set(QT_USE_QTUITOOLS TRUE) -+ set(QT_USE_QTWEBKIT TRUE) -+ endif(FREECAD_BUILD_GUI) -+ find_package(Qt4 REQUIRED) -+ -+ include(${QT_USE_FILE}) -+ -+ IF(NOT QT4_FOUND) -+ MESSAGE("Library qt-4.3 or above is not available, install QT or FreeCAD Gui version will not be built") -+ ENDIF(NOT QT4_FOUND) -+ -+ IF(NOT QT_QTWEBKIT_FOUND) -+ MESSAGE("Qt Webkit not found, will not build browser integration!") -+ ENDIF(NOT QT_QTWEBKIT_FOUND) -+ -+ -+ # This is a special version of the built in macro qt4_wrap_cpp -+ # It is required since moc'ed files are now included instead of being added to projects directly -+ # It adds a reverse dependency to solve this -+ # This has the unfortunate side effect that some files are always rebuilt -+ # There is probably a cleaner solution than this -+ macro(fc_wrap_cpp outfiles ) -+ # get include dirs -+ QT4_GET_MOC_FLAGS(moc_flags) -+ QT4_EXTRACT_OPTIONS(moc_files moc_options ${ARGN}) -+ # fixes bug 0000585: bug with boost 1.48 -+ SET(moc_options ${moc_options} -DBOOST_TT_HAS_OPERATOR_HPP_INCLUDED) -+ -+ foreach(it ${moc_files}) -+ get_filename_component(it ${it} ABSOLUTE) -+ QT4_MAKE_OUTPUT_FILE(${it} moc_ cpp outfile) -+ QT4_CREATE_MOC_COMMAND(${it} ${outfile} "${moc_flags}" "${moc_options}") -+ set(${outfiles} ${${outfiles}} ${outfile}) -+ add_file_dependencies(${it} ${outfile}) -+ endforeach(it) -+ endmacro(fc_wrap_cpp) -+ -+ if(FREECAD_BUILD_GUI) -+# -------------------------------- OpenGL -------------------------------- -+ -+ find_package(OpenGL) -+ include(FindPackageMessage) -+ if(OPENGL_GLU_FOUND) -+ find_package_message(OPENGL_GLU -+ "Found OpenGLU: ${OPENGL_glu_LIBRARY}" -+ "[${OPENGL_glu_LIBRARY}][${OEPNGL_INCLUDE_DIR}]") -+ else(OPENGL_GLU_FOUND) -+ message(FATAL_ERROR "The GLU library is required. Make sure it is installed.") -+ endif(OPENGL_GLU_FOUND) -+ -+# -------------------------------- Coin3D -------------------------------- -+ -+ find_package(Coin3D REQUIRED) -+ find_package(SoQt REQUIRED) -+ -+# ------------------------------ Spaceball ------------------------------- -+ -+ if (WIN32) -+ #future -+ else(WIN32) -+ find_package(Spnav) -+ endif(WIN32) -+ -+# ------------------------------ Matplotlib ------------------------------ -+ -+ find_package(Matplotlib) -+ IF(MATPLOTLIB_FOUND) -+ message("-- matplotlib-${MATPLOTLIB_VERSION} has been found.") -+ ELSE(MATPLOTLIB_FOUND) -+ message("matplotlib not found, Plot module will not available until matplotlib is installed!") -+ ENDIF(MATPLOTLIB_FOUND) -+ -+# ------------------------------------------------------------------------ -+ -+ -+ endif(FREECAD_BUILD_GUI) -+ -+ -+endif(FREECAD_LIBPACK_USE) -+ -+# copy build convenient files for M$ -+if(WIN32) -+ if (EXISTS BuildAll.bat) -+ configure_file(BuildAll.bat ${CMAKE_BINARY_DIR}/BuildAll.bat COPYONLY) -+ endif (EXISTS BuildAll.bat) -+ #configure_file(BuildAllNice.bat ${CMAKE_BINARY_DIR}/BuildAllNice.bat COPYONLY) -+endif(WIN32) -+ -+ -+include(cMake/FreeCadMacros.cmake) -+ -+ -+# ================================================================================ -+# == Global Compiler and Linker Settings ========================================= -+ -+include_directories(${CMAKE_BINARY_DIR}/src -+ ${CMAKE_SOURCE_DIR}/src) -+ -+# check for 64-bit platform -+IF(CMAKE_SIZEOF_VOID_P EQUAL 8) -+ MESSAGE(STATUS "Platform is 64-bit, set -D_OCC64") -+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_OCC64") -+ add_definitions(-D_OCC64 ) -+ELSE(CMAKE_SIZEOF_VOID_P EQUAL 8) -+ MESSAGE(STATUS "Platform is 32-bit") -+ENDIF(CMAKE_SIZEOF_VOID_P EQUAL 8) -+ -+ -+ -+IF(MSVC) -+ # set default compiler settings -+ #SET (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /GF /GY") -+ SET (CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -DFC_DEBUG") -+ # set default libs -+ SET (CMAKE_C_STANDARD_LIBRARIES "kernel32.lib user32.lib gdi32.lib winspool.lib SHFolder.lib shell32.lib ole32.lib oleaut32.lib uuid.lib comdlg32.lib advapi32.lib ") -+ set (CMAKE_CXX_STANDARD_LIBRARIES "${CMAKE_C_STANDARD_LIBRARIES}") -+ # set linker flag /nodefaultlib -+ set (CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} /NODEFAULTLIB") -+ SET (CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /NODEFAULTLIB") -+ -+ # Mark 32 bit executables large address aware so they can use > 2GB address space -+ # NOTE: This setting only has an effect on machines with at least 3GB of RAM, although it sets the linker option it doesn't set the the linker switch 'Enable Large Addresses' -+ IF(CMAKE_SIZEOF_VOID_P EQUAL 4) -+ set (CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} /LARGEADDRESSAWARE") -+ SET (CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /LARGEADDRESSAWARE") -+ ENDIF(CMAKE_SIZEOF_VOID_P EQUAL 4) -+ELSE(MSVC) -+ SET (CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -DFC_DEBUG") -+ MESSAGE(STATUS "DEBUG: ${CMAKE_CXX_FLAGS_DEBUG}") -+ENDIF(MSVC) -+IF(MINGW) -+ SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mthreads") -+ SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mthreads") -+ SET(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -mthreads -Wl,--export-all-symbols") -+ SET(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -mthreads -Wl,--export-all-symbols") -+ LINK_LIBRARIES(-lgdi32) -+ENDIF(MINGW) -+# 0000661: cmake build on Mac OS: dealing with dylib versus so -+IF(APPLE) -+ SET(CMAKE_SHARED_LIBRARY_SUFFIX ".so") -+ENDIF(APPLE) -+ -+add_subdirectory(src) -+add_subdirectory(data) -+ -+# ================================================================================ -+# == Packaging =================================================================== -+if(FREECAD_MAINTAINERS_BUILD AND NOT WIN32) -+ set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "An extensible Open Source CAx program") -+ set(CPACK_PACKAGE_VENDOR "FreeCAD development team") -+ if(WIN32) -+ set(CPACK_PACKAGE_DESCRIPTION_FILE "${CMAKE_CURRENT_SOURCE_DIR}/README.Win32") -+ else(WIN32) -+ set(CPACK_PACKAGE_DESCRIPTION_FILE "${CMAKE_CURRENT_SOURCE_DIR}/README.Linux") -+ endif(WIN32) -+ set(CPACK_RESOURCE_FILE_LICENSE "${CMAKE_CURRENT_SOURCE_DIR}/copying.lib") -+ set(CPACK_PACKAGE_VERSION_MAJOR ${PACKAGE_VERSION_MAJOR}) -+ set(CPACK_PACKAGE_VERSION_MINOR ${PACKAGE_VERSION_MINOR}) -+ set(CPACK_PACKAGE_VERSION_PATCH ${PACKAGE_VERSION_PATCH}) -+ set(CPACK_SOURCE_PACKAGE_FILE_NAME ${PACKAGE_NAME}-${PACKAGE_VERSION}) -+ -+ #for debian: 'cmake .. -DFREECAD_MAINTAINERS_BUILD=TRUE -DCPACK_GENERATOR="DEB"' -+ IF( CMAKE_SIZEOF_VOID_P EQUAL 4 ) -+ set(PKG_ARCH i386) -+ ELSE( CMAKE_SIZEOF_VOID_P EQUAL 4 ) -+ set(PKG_ARCH amd64) -+ ENDIF( CMAKE_SIZEOF_VOID_P EQUAL 4 ) -+ set(CPACK_DEBIAN_PACKAGE_SECTION "science") -+ set(CPACK_DEBIAN_PACKAGE_DEPENDS "python, oce | opencascade, libqtgui4, libcoin60, libsoqt4-20, libxerces-c3.1, zlib1g, libboost-dev, libeigen2-dev") -+ set(CPACK_PACKAGE_CONTACT "<root@localhost>") -+ set(CPACK_PACKAGE_FILE_NAME "${PACKAGE_NAME}-${PACKAGE_VERSION}_${PKG_ARCH}") -+ -+ if(WIN32) -+ set(CPACK_GENERATOR "ZIP") -+ set(CPACK_SOURCE_GENERATOR "ZIP") -+ else(WIN32) -+ if( CPACK_GENERATOR STREQUAL "" ) -+ set(CPACK_GENERATOR "TGZ") -+ set(CPACK_SOURCE_GENERATOR "TGZ") -+ endif() -+ endif(WIN32) -+ file(GLOB DOT ".*") -+ file(GLOB TILD "*~") -+ set(CPACK_SOURCE_IGNORE_FILES -+ "${DOT}" -+ "${TILD}" -+ ".a$" -+ ".am$" -+ ".in$" -+ ".bat$" -+ ".o$" -+ ".so$" -+ ".m4$" -+ "/_build/" -+ "/_cmake/" -+ "/.deps/" -+ "/.svn/" -+ "/CMakeFiles/" -+ "/CVS/" -+ "/autom4te.cache/" -+ "/build/" -+ "/debian/" -+ "/debug/" -+ "/docs/" -+ "/m4/" -+ "/qt-build/" -+ "/CxImage/" -+ "/WindowsInstaller/" -+ "AdditionalInfo.txt$" -+ "CMakeCache.txt$" -+ "Makefile$" -+ "\\\\.sh$" -+ "_CPack_" -+ "config.h$" -+ "config.log$" -+ "config.status$" -+ "configure$" -+ "configure.ac$" -+ "Doxyfile" -+ "html$" -+ "stamp-h1$" -+ ".swp$" -+ "tar.bz2" -+ "tar.gz" -+ "~$" -+ ) -+ #set(CPACK_SOURCE_IGNORE_FILES -+ # ${CPACK_SOURCE_IGNORE_FILES} -+ # "/Pivy-0.5/" -+ #) -+ set(CPACK_SOURCE_STRIP_FILES "") -+ include(CPack) -+ -+ #ADD_CUSTOM_TARGET(DIST make package_source) -+ -+endif(FREECAD_MAINTAINERS_BUILD AND NOT WIN32) -+ #add_custom_target(dist COMMAND ${CMAKE_MAKE_PROGRAM} package_source) -+ add_custom_target(dist-git -+ COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_SOURCE_DIR}/src/Tools/makedist.py -+ --srcdir=${CMAKE_SOURCE_DIR} --bindir=${CMAKE_BINARY_DIR} -+ WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} -+ ) -+ add_custom_target(distdfsg-git -+ COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_SOURCE_DIR}/src/Tools/makedist.py -+ --srcdir=${CMAKE_SOURCE_DIR} --bindir=${CMAKE_BINARY_DIR} --dfsg -+ WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} -+ ) -+if(CMAKE_COMPILER_IS_GNUCXX OR MINGW) -+ add_custom_target(distcheck-git -+ COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_SOURCE_DIR}/src/Tools/makedist.py -+ --srcdir=${CMAKE_SOURCE_DIR} --bindir=${CMAKE_BINARY_DIR} --check -+ WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} -+ ) -+ add_custom_target(distcheckdfsg-git -+ COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_SOURCE_DIR}/src/Tools/makedist.py -+ --srcdir=${CMAKE_SOURCE_DIR} --bindir=${CMAKE_BINARY_DIR} --dfsg --check -+ WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} -+ ) -+endif(CMAKE_COMPILER_IS_GNUCXX OR MINGW) -+ -diff -Naur freecad-0.13.1830.orig/src/Gui/CMakeLists.txt freecad-0.13.1830/src/Gui/CMakeLists.txt ---- freecad-0.13.1830.orig/src/Gui/CMakeLists.txt 2013-10-25 18:49:34.262330288 +0200 -+++ freecad-0.13.1830/src/Gui/CMakeLists.txt 2013-10-25 18:49:59.455527138 +0200 -@@ -562,7 +562,7 @@ - #SET(Resource_RCS - # Icons/resource.qrc - # Language/translation.qrc) --#fc_add_resources(Resource_SRCS ${Resource_RCS}) -+#qt4_add_resources(Resource_SRCS ${Resource_RCS}) - #SET(Resource_SRCS - # ${Resource_SRCS} - # Icons/resource.qrc -diff -Naur freecad-0.13.1830.orig/src/Gui/CMakeLists.txt.orig freecad-0.13.1830/src/Gui/CMakeLists.txt.orig ---- freecad-0.13.1830.orig/src/Gui/CMakeLists.txt.orig 1970-01-01 01:00:00.000000000 +0100 -+++ freecad-0.13.1830/src/Gui/CMakeLists.txt.orig 2013-02-02 18:09:17.000000000 +0100 -@@ -0,0 +1,878 @@ -+#add_subdirectory(Icons) -+ -+if(WIN32) -+add_definitions(-DFCGui -DQIIS_MAKEDLL) -+endif(WIN32) -+if (FREECAD_USE_3DCONNEXION) -+add_definitions(-D_USE_3DCONNEXION_SDK) -+endif(FREECAD_USE_3DCONNEXION) -+ -+include_directories( -+ ${CMAKE_CURRENT_SOURCE_DIR} -+ ${CMAKE_CURRENT_BINARY_DIR} -+ ${CMAKE_CURRENT_SOURCE_DIR}/.. -+ ${CMAKE_CURRENT_BINARY_DIR}/.. -+ ${CMAKE_CURRENT_BINARY_DIR}/Language -+ ${CMAKE_CURRENT_BINARY_DIR}/propertyeditor -+ ${CMAKE_CURRENT_BINARY_DIR}/TaskView -+ ${Boost_INCLUDE_DIRS} -+ ${COIN3D_INCLUDE_DIR} -+ ${PYTHON_INCLUDE_PATH} -+ ${SOQT_INCLUDE_DIR} -+ ${XERCESC_INCLUDE_DIR} -+ ${QT_INCLUDE_DIR} -+ ${ZLIB_INCLUDE_DIR} -+) -+ -+if(MSVC) -+ set(FreeCADGui_LIBS -+ FreeCADApp -+ debug ${COIN3D_LIBRARY_DEBUG} -+ optimized ${COIN3D_LIBRARY_RELEASE} -+ debug ${SOQT_LIBRARY_DEBUG} -+ optimized ${SOQT_LIBRARY_RELEASE} -+ ${QT_DEBUG_LIBRARIES} -+ ${QT_LIBRARIES} -+ QtUiTools.lib -+ ${OPENGL_gl_LIBRARY} -+ ) -+else(MSVC) -+ set(FreeCADGui_LIBS -+ FreeCADBase -+ FreeCADApp -+ ${COIN3D_LIBRARY} -+ ${SOQT_LIBRARIES} -+ ${QT_LIBRARIES} -+ ${Boost_LIBRARIES} -+ ${OPENGL_gl_LIBRARY} -+ ) -+endif(MSVC) -+ -+IF(SPNAV_FOUND) -+ add_definitions(-DSPNAV_FOUND) -+ include_directories( -+ ${SPNAV_INCLUDE_DIR} -+ ) -+ set(FreeCADGui_LIBS -+ ${FreeCADGui_LIBS} -+ ${SPNAV_LIBRARIES} -+ ) -+ENDIF(SPNAV_FOUND) -+ -+generate_from_xml(DocumentPy) -+generate_from_xml(PythonWorkbenchPy) -+generate_from_xml(ViewProviderPy) -+generate_from_xml(ViewProviderDocumentObjectPy) -+generate_from_xml(ViewProviderPythonFeaturePy) -+generate_from_xml(WorkbenchPy) -+generate_from_xml(SelectionObjectPy) -+ -+generate_from_py(FreeCADGuiInit GuiInitScript.h) -+ -+# The XML files -+SET(FreeCADGui_XML_SRCS -+ ViewProviderDocumentObjectPy.xml -+ ViewProviderPythonFeaturePy.xml -+ ViewProviderPy.xml -+ PythonWorkbenchPy.xml -+ WorkbenchPy.xml -+ SelectionObjectPy.xml -+ DocumentPy.xml -+) -+SOURCE_GROUP("XML" FILES ${FreeCADApp_XML_SRCS}) -+ -+# The 3D Connexion SDK files -+if(FREECAD_USE_3DCONNEXION) -+SET(FreeCADGui_SDK_SRCS -+ 3Dconnexion/I3dMouseParams.h -+ 3Dconnexion/MouseParameters.cpp -+ 3Dconnexion/MouseParameters.h -+ 3Dconnexion/GuiApplicationNativeEventAwareWin32.cpp -+) -+SOURCE_GROUP("3D connexion SDK" FILES ${FreeCADGui_SDK_SRCS}) -+endif(FREECAD_USE_3DCONNEXION) -+ -+set(Gui_MOC_HDRS -+ Action.h -+ CallTips.h -+ CombiView.h -+ Control.h -+ DemoMode.h -+ DownloadDialog.h -+ DlgActionsImp.h -+ DlgActivateWindowImp.h -+ DlgCommandsImp.h -+ DlgCustomizeImp.h -+ DlgCustomizeSpaceball.h -+ DlgCustomizeSpNavSettings.h -+ DlgDisplayPropertiesImp.h -+ DlgEditorImp.h -+ DlgGeneralImp.h -+ DlgInputDialogImp.h -+ DlgKeyboardImp.h -+ DlgMacroExecuteImp.h -+ DlgMacroRecordImp.h -+ DlgRunExternal.h -+ DlgEditFileIncludeProptertyExternal.h -+ DlgMaterialPropertiesImp.h -+ DlgOnlineHelpImp.h -+ DlgParameterImp.h -+ DlgPreferencesImp.h -+ DlgProjectUtility.h -+ DlgReportViewImp.h -+ DlgSettings3DViewImp.h -+ DlgSettingsViewColor.h -+ DlgSettingsColorGradientImp.h -+ DlgSettingsDocumentImp.h -+ DlgSettingsImageImp.h -+ DlgSettingsMacroImp.h -+ DlgSettingsUnitsImp.h -+ DlgTipOfTheDayImp.h -+ DlgToolbarsImp.h -+ TaskDlgRelocation.h -+ DlgUndoRedo.h -+ DockWindow.h -+ DockWindowManager.h -+ EditorView.h -+ FileDialog.h -+ Flag.h -+ GuiApplicationNativeEventAware.h -+ HelpView.h -+ InputVector.h -+ MainWindow.h -+ ManualAlignment.h -+ MDIView.h -+ NetworkRetriever.h -+ OnlineDocumentation.h -+ Placement.h -+ PrefWidgets.h -+ ProgressBar.h -+ PropertyPage.h -+ PropertyView.h -+ PythonConsole.h -+ PythonDebugger.h -+ PythonEditor.h -+ ReportView.h -+ SceneInspector.h -+ SelectionView.h -+ SpinBox.h -+ Splashscreen.h -+ TaskPanelView.h -+ TextEdit.h -+ TextureMapping.h -+ ToolBox.h -+ Transform.h -+ Tree.h -+ TreeView.h -+ View3DInventor.h -+ WidgetFactory.h -+ Widgets.h -+ Language/Translator.h -+ propertyeditor/PropertyEditor.h -+ propertyeditor/PropertyItem.h -+ propertyeditor/PropertyItemDelegate.h -+ propertyeditor/PropertyModel.h -+ TaskView/TaskAppearance.h -+ TaskView/TaskSelectLinkProperty.h -+ TaskView/TaskDialog.h -+ TaskView/TaskWatcher.h -+ TaskView/TaskEditControl.h -+ TaskView/TaskView.h -+) -+#qt4_wrap_cpp(Gui_MOC_SRCS ${Gui_MOC_HDRS}) -+fc_wrap_cpp(Gui_MOC_SRCS ${Gui_MOC_HDRS}) -+#SOURCE_GROUP("Moc" FILES ${Gui_MOC_SRCS}) -+ -+SET(Gui_UIC_SRCS -+ AboutApplication.ui -+ DemoMode.ui -+ DlgActions.ui -+ DlgActivateWindow.ui -+ DlgAuthorization.ui -+ DlgChooseIcon.ui -+ DlgCommands.ui -+ DlgCustomizeSpNavSettings.ui -+ DlgDisplayProperties.ui -+ DlgEditor.ui -+ DlgGeneral.ui -+ DlgInputDialog.ui -+ DlgKeyboard.ui -+ DlgMacroExecute.ui -+ DlgRunExternal.ui -+ DlgMacroRecord.ui -+ DlgMaterialProperties.ui -+ DlgOnlineHelp.ui -+ DlgParameter.ui -+ DlgPreferences.ui -+ DlgProjectInformation.ui -+ DlgProjectUtility.ui -+ DlgReportView.ui -+ DlgSettings3DView.ui -+ DlgSettingsUnits.ui -+ DlgSettingsViewColor.ui -+ DlgSettingsColorGradient.ui -+ DlgSettingsDocument.ui -+ DlgSettingsImage.ui -+ DlgSettingsMacro.ui -+ DlgTipOfTheDay.ui -+ DlgToolbars.ui -+ DlgTreeWidget.ui -+ DlgLocationAngle.ui -+ DlgLocationPos.ui -+ MouseButtons.ui -+ SceneInspector.ui -+ InputVector.ui -+ Placement.ui -+ TextureMapping.ui -+ TaskView/TaskAppearance.ui -+ TaskView/TaskSelectLinkProperty.ui -+) -+ -+SET(Gui_RES_SRCS -+ Icons/resource.qrc -+ Language/translation.qrc -+ iisTaskPanel/src/iisTaskPanel.qrc -+) -+QT4_ADD_RESOURCES(Gui_QRC_SRCS ${Gui_RES_SRCS}) -+ -+QT4_WRAP_UI(Gui_UIC_HDRS ${Gui_UIC_SRCS}) -+SOURCE_GROUP("Uic" FILES ${Gui_UIC_HDRS}) -+ -+# The command sources -+SET(Command_CPP_SRCS -+ Action.cpp -+ Command.cpp -+ CommandDoc.cpp -+ CommandFeat.cpp -+ CommandMacro.cpp -+ CommandStd.cpp -+ CommandWindow.cpp -+ CommandTest.cpp -+ CommandView.cpp -+) -+SET(Command_SRCS -+ ${Command_CPP_SRCS} -+ Action.h -+ Command.h -+) -+SOURCE_GROUP("Command" FILES ${Command_SRCS}) -+ -+# The dialog sources -+SET(Dialog_CPP_SRCS -+ DemoMode.cpp -+ DlgActivateWindowImp.cpp -+ DlgDisplayPropertiesImp.cpp -+ DlgInputDialogImp.cpp -+ DlgMacroExecuteImp.cpp -+ DlgRunExternal.cpp -+ DlgEditFileIncludeProptertyExternal.cpp -+ DlgMacroRecordImp.cpp -+ DlgMaterialPropertiesImp.cpp -+ DlgParameterImp.cpp -+ DlgProjectInformationImp.cpp -+ DlgProjectUtility.cpp -+ DlgTipOfTheDayImp.cpp -+ TaskDlgRelocation.cpp -+ DlgUndoRedo.cpp -+ InputVector.cpp -+ Placement.cpp -+ PropertyPage.cpp -+ SceneInspector.cpp -+ TextureMapping.cpp -+ Transform.cpp -+ DownloadDialog.cpp -+) -+ -+SET(Dialog_HPP_SRCS -+ DemoMode.h -+ DlgActivateWindowImp.h -+ DlgDisplayPropertiesImp.h -+ DlgInputDialogImp.h -+ DlgMacroExecuteImp.h -+ DlgRunExternal.h -+ DlgEditFileIncludeProptertyExternal.h -+ DlgMacroRecordImp.h -+ DlgMaterialPropertiesImp.h -+ DlgParameterImp.h -+ DlgProjectInformationImp.h -+ DlgProjectUtility.h -+ DlgTipOfTheDayImp.h -+ TaskDlgRelocation.h -+ DlgUndoRedo.h -+ InputVector.h -+ Placement.h -+ PropertyPage.h -+ SceneInspector.h -+ TextureMapping.h -+ Transform.h -+ DownloadDialog.h -+) -+ -+SET(Dialog_SRCS -+ ${Dialog_CPP_SRCS} -+ ${Dialog_HPP_SRCS} -+ AboutApplication.ui -+ DemoMode.ui -+ DlgActivateWindow.ui -+ DlgAuthorization.ui -+ DlgDisplayProperties.ui -+ DlgInputDialog.ui -+ DlgMacroExecute.ui -+ DlgRunExternal.ui -+ DlgMacroRecord.ui -+ DlgMaterialProperties.ui -+ DlgParameter.ui -+ DlgProjectInformation.ui -+ DlgProjectUtility.ui -+ DlgTipOfTheDay.ui -+ DlgTreeWidget.ui -+ MouseButtons.ui -+ InputVector.ui -+ Placement.ui -+ SceneInspector.ui -+ TextureMapping.ui -+) -+SOURCE_GROUP("Dialog" FILES ${Dialog_SRCS}) -+ -+# The customize dialog sources -+SET(Dialog_Customize_CPP_SRCS -+ DlgActionsImp.cpp -+ DlgCommandsImp.cpp -+ DlgCustomizeImp.cpp -+ DlgCustomizeSpaceball.cpp -+ DlgCustomizeSpNavSettings.cpp -+ DlgKeyboardImp.cpp -+ DlgToolbarsImp.cpp -+) -+SET(Dialog_Customize_HPP_SRCS -+ DlgActionsImp.h -+ DlgCommandsImp.h -+ DlgCustomizeImp.h -+ DlgCustomizeSpaceball.h -+ DlgCustomizeSpNavSettings.h -+ DlgKeyboardImp.h -+ DlgToolbarsImp.h -+) -+SET(Dialog_Customize_SRCS -+ ${Dialog_Customize_CPP_SRCS} -+ ${Dialog_Customize_HPP_SRCS} -+ DlgActions.ui -+ DlgChooseIcon.ui -+ DlgCommands.ui -+ DlgCustomizeSpNavSettings.ui -+ DlgKeyboard.ui -+ DlgToolbars.ui -+) -+SOURCE_GROUP("Dialog\\Customize" FILES ${Dialog_Customize_SRCS}) -+ -+# The settings dialog sources -+SET(Dialog_Settings_CPP_SRCS -+ DlgEditorImp.cpp -+ DlgGeneralImp.cpp -+ DlgOnlineHelpImp.cpp -+ DlgPreferencesImp.cpp -+ DlgReportViewImp.cpp -+ DlgSettings3DViewImp.cpp -+ DlgSettingsUnitsImp.cpp -+ DlgSettingsViewColor.cpp -+ DlgSettingsColorGradientImp.cpp -+ DlgSettingsDocumentImp.cpp -+ DlgSettingsImageImp.cpp -+ DlgSettingsMacroImp.cpp -+) -+SET(Dialog_Settings_HPP_SRCS -+ DlgEditorImp.h -+ DlgGeneralImp.h -+ DlgOnlineHelpImp.h -+ DlgPreferencesImp.h -+ DlgReportViewImp.h -+ DlgSettings3DViewImp.h -+ DlgSettingsUnitsImp.h -+ DlgSettingsViewColor.h -+ DlgSettingsColorGradientImp.h -+ DlgSettingsDocumentImp.h -+ DlgSettingsImageImp.h -+ DlgSettingsMacroImp.h -+) -+SET(Dialog_Settings_SRCS -+ ${Dialog_Settings_CPP_SRCS} -+ ${Dialog_Settings_HPP_SRCS} -+ DlgEditor.ui -+ DlgGeneral.ui -+ DlgOnlineHelp.ui -+ DlgPreferences.ui -+ DlgReportView.ui -+ DlgSettings3DView.ui -+ DlgSettingsUnits.ui -+ DlgSettingsViewColor.ui -+ DlgSettingsColorGradient.ui -+ DlgSettingsDocument.ui -+ DlgSettingsImage.ui -+ DlgSettingsMacro.ui -+) -+SOURCE_GROUP("Dialog\\Settings" FILES ${Dialog_Settings_SRCS}) -+ -+# The dock windows sources -+SET(Dock_Windows_CPP_SRCS -+ CombiView.cpp -+ DockWindow.cpp -+ HelpView.cpp -+ PropertyView.cpp -+ ReportView.cpp -+ SelectionView.cpp -+ TaskPanelView.cpp -+ ToolBox.cpp -+ Tree.cpp -+ TreeView.cpp -+) -+SET(Dock_Windows_HPP_SRCS -+ CombiView.h -+ DockWindow.h -+ HelpView.h -+ PropertyView.h -+ ReportView.h -+ SelectionView.h -+ TaskPanelView.h -+ ToolBox.h -+ Tree.h -+ TreeView.h -+) -+SET(Dock_Windows_SRCS -+ ${Dock_Windows_CPP_SRCS} -+ ${Dock_Windows_HPP_SRCS} -+) -+SOURCE_GROUP("Dock Windows" FILES ${Dock_Windows_SRCS}) -+ -+# The editor sources -+SET(Editor_CPP_SRCS -+ CallTips.cpp -+ EditorView.cpp -+ PythonConsole.cpp -+ PythonConsolePy.cpp -+ PythonDebugger.cpp -+ PythonEditor.cpp -+ SyntaxHighlighter.cpp -+ TextEdit.cpp -+) -+SET(Editor_HPP_SRCS -+ CallTips.h -+ EditorView.h -+ PythonConsole.h -+ PythonConsolePy.h -+ PythonDebugger.h -+ PythonEditor.h -+ SyntaxHighlighter.h -+ TextEdit.h -+) -+SET(Editor_SRCS -+ ${Editor_CPP_SRCS} -+ ${Editor_HPP_SRCS} -+) -+SOURCE_GROUP("Editor" FILES ${Editor_SRCS}) -+ -+# The help system -+SET(Help_CPP_SRCS -+ Assistant.cpp -+ NetworkRetriever.cpp -+ OnlineDocumentation.cpp -+ WhatsThis.cpp -+) -+SET(Help_SRCS -+ ${Help_CPP_SRCS} -+ Assistant.h -+ NetworkRetriever.h -+ OnlineDocumentation.h -+ WhatsThis.h -+) -+SOURCE_GROUP("Help" FILES ${Help_SRCS}) -+ -+ -+# The i18n sources -+SET(Language_SRCS -+ Language/Translator.cpp -+ Language/Translator.h -+) -+SOURCE_GROUP("Language" FILES ${Language_SRCS}) -+ -+# The property editor -+SET(Propertyeditor_SRCS -+ propertyeditor/PropertyEditor.cpp -+ propertyeditor/PropertyEditor.h -+ propertyeditor/PropertyItem.cpp -+ propertyeditor/PropertyItem.h -+ propertyeditor/PropertyItemDelegate.cpp -+ propertyeditor/PropertyItemDelegate.h -+ propertyeditor/PropertyModel.cpp -+ propertyeditor/PropertyModel.h -+) -+SOURCE_GROUP("Propertyeditor" FILES ${Propertyeditor_SRCS}) -+ -+# The task view -+SET(Task_View_SRCS -+ TaskView/TaskAppearance.cpp -+ TaskView/TaskAppearance.h -+ TaskView/TaskAppearance.ui -+ TaskView/TaskSelectLinkProperty.cpp -+ TaskView/TaskSelectLinkProperty.h -+ TaskView/TaskSelectLinkProperty.ui -+ TaskView/TaskEditControl.cpp -+ TaskView/TaskEditControl.h -+ TaskView/TaskEditControl.ui -+ TaskView/TaskView.cpp -+ TaskView/TaskView.h -+ TaskView/TaskDialog.cpp -+ TaskView/TaskDialog.h -+ TaskView/TaskDialogPython.cpp -+ TaskView/TaskDialogPython.h -+ TaskView/TaskWatcher.cpp -+ TaskView/TaskWatcher.h -+) -+SOURCE_GROUP("Task View" FILES ${Task_View_SRCS}) -+ -+SET(iisTaskPanel_SRCS -+ iisTaskPanel/src/iisfreecadscheme.cpp -+ iisTaskPanel/src/iisfreecadscheme.h -+ iisTaskPanel/src/iisiconlabel.cpp -+ iisTaskPanel/src/iisiconlabel.h -+ iisTaskPanel/src/iistaskbox.cpp -+ iisTaskPanel/src/iistaskbox.h -+ iisTaskPanel/src/iistaskgroup.cpp -+ iisTaskPanel/src/iistaskgroup.h -+ iisTaskPanel/src/iistaskheader.cpp -+ iisTaskPanel/src/iistaskheader.h -+ iisTaskPanel/src/iistaskpanel.cpp -+ iisTaskPanel/src/iistaskpanel.h -+ iisTaskPanel/src/iistaskpanelscheme.cpp -+ iisTaskPanel/src/iistaskpanelscheme.h -+ iisTaskPanel/src/iiswinxptaskpanelscheme.cpp -+ iisTaskPanel/src/iiswinxptaskpanelscheme.h -+ iisTaskPanel/src/iistaskpanel_global.h -+) -+SOURCE_GROUP("Widget\\iisTaskPanel" FILES ${iisTaskPanel_SRCS}) -+set(iis_MOC_HDRS -+ iisTaskPanel/src/iisiconlabel.h -+ iisTaskPanel/src/iistaskbox.h -+ iisTaskPanel/src/iistaskgroup.h -+ iisTaskPanel/src/iistaskheader.h -+) -+qt4_wrap_cpp(iis_MOC_SRCS ${iis_MOC_HDRS}) -+SOURCE_GROUP("Widget\\iisTaskPanel\\Mocs" FILES ${iis_MOC_SRCS}) -+ -+ -+#SET(Resource_RCS -+# Icons/resource.qrc -+# Language/translation.qrc) -+#fc_add_resources(Resource_SRCS ${Resource_RCS}) -+#SET(Resource_SRCS -+# ${Resource_SRCS} -+# Icons/resource.qrc -+# Language/translation.qrc -+#) -+#SOURCE_GROUP("Resource" FILES ${Resource_SRCS}) -+ -+# The 3d view -+SET(View3D_CPP_SRCS -+ Flag.cpp -+ MouseSelection.cpp -+ NavigationStyle.cpp -+ InventorNavigationStyle.cpp -+ CADNavigationStyle.cpp -+ BlenderNavigationStyle.cpp -+ TouchpadNavigationStyle.cpp -+ SplitView3DInventor.cpp -+ View.cpp -+ View3DInventor.cpp -+ View3DInventorExamples.cpp -+ View3DInventorViewer.cpp -+ View3DPy.cpp -+) -+SET(View3D_SRCS -+ ${View3D_CPP_SRCS} -+ Flag.h -+ MouseSelection.h -+ NavigationStyle.h -+ SplitView3DInventor.h -+ View.h -+ View3DInventor.h -+ View3DInventorExamples.h -+ View3DInventorViewer.h -+ View3DPy.h -+) -+SOURCE_GROUP("View3D" FILES ${View3D_SRCS}) -+ -+# The view provider sources -+SET(Viewprovider_CPP_SRCS -+ ViewProvider.cpp -+ ViewProviderAnnotation.cpp -+ ViewProviderDocumentObject.cpp -+ ViewProviderDocumentObjectGroup.cpp -+ ViewProviderDocumentObjectPyImp.cpp -+ ViewProviderPythonFeaturePyImp.cpp -+ ViewProviderExtern.cpp -+ ViewProviderFeature.cpp -+ ViewProviderGeometryObject.cpp -+ ViewProviderInventorObject.cpp -+ ViewProviderMeasureDistance.cpp -+ ViewProviderPyImp.cpp -+ ViewProviderPythonFeature.cpp -+ ViewProviderVRMLObject.cpp -+ ViewProviderBuilder.cpp -+) -+SET(Viewprovider_SRCS -+ ${Viewprovider_CPP_SRCS} -+ ViewProvider.h -+ ViewProviderAnnotation.h -+ ViewProviderDocumentObject.h -+ ViewProviderDocumentObjectGroup.h -+ ViewProviderExtern.h -+ ViewProviderFeature.h -+ ViewProviderGeometryObject.h -+ ViewProviderInventorObject.h -+ ViewProviderMeasureDistance.h -+ ViewProviderPythonFeature.h -+ ViewProviderVRMLObject.h -+ ViewProviderBuilder.h -+) -+SOURCE_GROUP("View3D\\Viewprovider" FILES ${Viewprovider_SRCS}) -+ -+# The Inventor sources -+SET(Inventor_CPP_SRCS -+ Inventor/SoDrawingGrid.cpp -+ SoFCBackgroundGradient.cpp -+ SoFCBoundingBox.cpp -+ SoFCColorBar.cpp -+ SoFCColorGradient.cpp -+ SoFCColorLegend.cpp -+ SoFCDB.cpp -+ SoFCInteractiveElement.cpp -+ SoFCOffscreenRenderer.cpp -+ SoFCSelection.cpp -+ SoFCUnifiedSelection.cpp -+ SoFCSelectionAction.cpp -+ SoFCVectorizeSVGAction.cpp -+ SoFCVectorizeU3DAction.cpp -+ SoNavigationDragger.cpp -+ SoAxisCrossKit.cpp -+ SoTextLabel.cpp -+) -+SET(Inventor_SRCS -+ ${Inventor_CPP_SRCS} -+ Inventor/SoDrawingGrid.h -+ SoFCBackgroundGradient.h -+ SoFCBoundingBox.h -+ SoFCColorBar.h -+ SoFCColorGradient.h -+ SoFCColorLegend.h -+ SoFCDB.h -+ SoFCInteractiveElement.h -+ SoFCOffscreenRenderer.h -+ SoFCSelection.h -+ SoFCUnifiedSelection.h -+ SoFCSelectionAction.h -+ SoFCVectorizeSVGAction.h -+ SoFCVectorizeU3DAction.h -+ SoNavigationDragger.h -+ SoAxisCrossKit.h -+ SoTextLabel.h -+) -+SOURCE_GROUP("View3D\\Inventor" FILES ${Inventor_SRCS}) -+ -+# The widget sources -+SET(Widget_CPP_SRCS -+ FileDialog.cpp -+ MainWindow.cpp -+ MDIView.cpp -+ PrefWidgets.cpp -+ ProgressBar.cpp -+ SpinBox.cpp -+ Splashscreen.cpp -+ WidgetFactory.cpp -+ Widgets.cpp -+ Window.cpp -+) -+SET(Widget_HPP_SRCS -+ FileDialog.h -+ MainWindow.h -+ MDIView.h -+ PrefWidgets.h -+ ProgressBar.h -+ SpinBox.h -+ Splashscreen.h -+ WidgetFactory.h -+ Widgets.h -+ Window.h -+) -+SET(Widget_SRCS -+ ${Widget_CPP_SRCS} -+ ${Widget_HPP_SRCS} -+) -+SOURCE_GROUP("Widget" FILES ${Widget_SRCS}) -+ -+# The workbench sources -+SET(Workbench_CPP_SRCS -+ DockWindowManager.cpp -+ MenuManager.cpp -+ PythonWorkbenchPyImp.cpp -+ ToolBarManager.cpp -+ ToolBoxManager.cpp -+ Workbench.cpp -+ WorkbenchFactory.cpp -+ WorkbenchManager.cpp -+ WorkbenchPyImp.cpp -+) -+SET(Workbench_SRCS -+ ${Workbench_CPP_SRCS} -+ DockWindowManager.h -+ MenuManager.h -+ ToolBarManager.h -+ ToolBoxManager.h -+ Workbench.h -+ WorkbenchFactory.h -+ WorkbenchManager.h -+) -+SOURCE_GROUP("Workbench" FILES ${Workbench_SRCS}) -+ -+SET(Selection_SRCS -+ SelectionObjectPyImp.cpp -+ SelectionObject.h -+ SelectionObject.cpp -+ Selection.h -+ Selection.cpp -+ SelectionFilter.h -+ SelectionFilter.cpp -+ SelectionFilter.y -+ SelectionFilter.l -+) -+SOURCE_GROUP("Selection" FILES ${Selection_SRCS}) -+ -+# The FreeCADGui sources -+SET(FreeCADGui_CPP_SRCS -+ Application.cpp -+ ApplicationPy.cpp -+ BitmapFactory.cpp -+ Document.cpp -+ DocumentModel.cpp -+ DocumentPyImp.cpp -+ GuiApplicationNativeEventAware.cpp -+ GuiConsole.cpp -+ Macro.cpp -+ MergeDocuments.cpp -+ resource.cpp -+ Control.cpp -+ SpaceballEvent.cpp -+ Thumbnail.cpp -+ Utilities.cpp -+ WaitCursor.cpp -+ ManualAlignment.cpp -+) -+SET(FreeCADGui_SRCS -+ Application.h -+ BitmapFactory.h -+ Document.h -+ DocumentModel.h -+ FreeCADGuiInit.py -+ GuiApplicationNativeEventAware.h -+ GuiConsole.h -+ InventorAll.h -+ Macro.h -+ MergeDocuments.h -+ PreCompiled.cpp -+ PreCompiled.h -+ Qt4All.h -+ Control.h -+ SpaceballEvent.h -+ Thumbnail.h -+ Utilities.h -+ WaitCursor.h -+ ManualAlignment.h -+) -+ -+SET(FreeCADGui_SRCS -+ ${FreeCADGui_SDK_SRCS} -+ ${FreeCADGui_CPP_SRCS} -+ ${FreeCADGui_XML_SRCS} -+ ${iis_MOC_SRCS} -+ ${Gui_QRC_SRCS} -+ ${Gui_UIC_HDRS} -+ ${Command_SRCS} -+ ${Dialog_SRCS} -+ ${Dialog_Customize_SRCS} -+ ${Dialog_Settings_SRCS} -+ ${Dock_Windows_SRCS} -+ ${Editor_SRCS} -+ ${Help_SRCS} -+ ${Inventor_SRCS} -+ ${Language_SRCS} -+ ${Propertyeditor_SRCS} -+ ${Task_View_SRCS} -+ ${iisTaskPanel_SRCS} -+ ${Resource_SRCS} -+ ${View3D_SRCS} -+ ${Viewprovider_SRCS} -+ ${Widget_SRCS} -+ ${Workbench_SRCS} -+ ${Selection_SRCS} -+ ${FreeCADGui_SRCS} -+) -+ -+if(MSVC) -+ add_definitions(-D_PreComp_) -+ SET(FreeCADGui_CPP_SRCS -+ Language/Translator.cpp -+ propertyeditor/PropertyEditor.cpp -+ propertyeditor/PropertyItem.cpp -+ propertyeditor/PropertyItemDelegate.cpp -+ propertyeditor/PropertyModel.cpp -+ TaskView/TaskAppearance.cpp -+ TaskView/TaskSelectLinkProperty.cpp -+ TaskView/TaskEditControl.cpp -+ TaskView/TaskView.cpp -+ ${Command_CPP_SRCS} -+ ${Dialog_CPP_SRCS} -+ ${Dialog_Customize_CPP_SRCS} -+ ${Dialog_Settings_CPP_SRCS} -+ ${Dock_Windows_CPP_SRCS} -+ ${Editor_CPP_SRCS} -+ ${Help_CPP_SRCS} -+ ${Inventor_CPP_SRCS} -+ ${View3D_CPP_SRCS} -+ ${Viewprovider_CPP_SRCS} -+ ${Widget_CPP_SRCS} -+ ${Workbench_CPP_SRCS} -+ ${FreeCADGui_CPP_SRCS} -+ ) -+ ADD_MSVC_PRECOMPILED_HEADER("PreCompiled.h" "PreCompiled.cpp" FreeCADGui_CPP_SRCS) -+endif(MSVC) -+ -+add_library(FreeCADGui SHARED ${FreeCADGui_SRCS}) -+ -+target_link_libraries(FreeCADGui ${FreeCADGui_LIBS}) -+ -+# Note this is IDE specific, not necessarily platform specific -+if(MSVC) -+ set_target_properties(FreeCADGui PROPERTIES DEBUG_OUTPUT_NAME "FreeCADGuiD") -+ set_target_properties(FreeCADGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin) -+ # dirty hack to avoid Debug/Release subdirectory -+ set_target_properties(FreeCADGui PROPERTIES PREFIX "../") -+elseif(MINGW) -+ set_target_properties(FreeCADGui PROPERTIES DEBUG_OUTPUT_NAME "FreeCADGuiD") -+ set_target_properties(FreeCADGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin) -+else(MSVC) -+ set_target_properties(FreeCADGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib) -+ set_target_properties(FreeCADGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) -+endif(MSVC) -+ -+if(WIN32) -+ INSTALL(TARGETS FreeCADGui -+ RUNTIME DESTINATION bin -+ LIBRARY DESTINATION lib -+ ) -+else(WIN32) -+ INSTALL(TARGETS FreeCADGui -+ LIBRARY DESTINATION lib -+ ) -+ INSTALL(FILES Icons/freecad.xpm Icons/freecad-doc.png -+ DESTINATION ${CMAKE_INSTALL_DATADIR} -+ ) -+endif(WIN32) -+ -diff -Naur freecad-0.13.1830.orig/src/Mod/Image/Gui/AppImageGui.cpp freecad-0.13.1830/src/Mod/Image/Gui/AppImageGui.cpp ---- freecad-0.13.1830.orig/src/Mod/Image/Gui/AppImageGui.cpp 2013-10-25 18:49:34.535662140 +0200 -+++ freecad-0.13.1830/src/Mod/Image/Gui/AppImageGui.cpp 2013-10-25 18:49:59.455527138 +0200 -@@ -20,7 +20,7 @@ - #include <Gui/Language/Translator.h>
- #include "Workbench.h"
- #include "ViewProviderImagePlane.h"
--#include "qrc_Image.cpp"
-+#include "qrc_Image.cxx"
-
- // use a different name to CreateCommand()
- void CreateImageCommands(void);
-diff -Naur freecad-0.13.1830.orig/src/Mod/Image/Gui/CMakeLists.txt freecad-0.13.1830/src/Mod/Image/Gui/CMakeLists.txt ---- freecad-0.13.1830.orig/src/Mod/Image/Gui/CMakeLists.txt 2013-10-25 18:49:34.538995456 +0200 -+++ freecad-0.13.1830/src/Mod/Image/Gui/CMakeLists.txt 2013-10-25 18:49:59.455527138 +0200 -@@ -29,7 +29,7 @@ - Resources/Image.qrc - ) - --fc_add_resources(ImageGui_QRC_SRCS ${ImageGui_RES_SRCS}) -+qt4_add_resources(ImageGui_QRC_SRCS ${ImageGui_RES_SRCS}) - #QT4_ADD_RESOURCES(ImageGui_QRC_SRCS ${ImageGui_RES_SRCS}) - - SET(ImageGui_SRCS -diff -Naur freecad-0.13.1830.orig/src/Mod/Image/Gui/CMakeLists.txt.orig freecad-0.13.1830/src/Mod/Image/Gui/CMakeLists.txt.orig ---- freecad-0.13.1830.orig/src/Mod/Image/Gui/CMakeLists.txt.orig 1970-01-01 01:00:00.000000000 +0100 -+++ freecad-0.13.1830/src/Mod/Image/Gui/CMakeLists.txt.orig 2013-02-02 18:09:17.000000000 +0100 -@@ -0,0 +1,80 @@ -+include_directories( -+ ${CMAKE_CURRENT_BINARY_DIR} -+ ${Boost_INCLUDE_DIRS} -+ ${COIN3D_INCLUDE_DIR} -+ #${OPENCV_INCLUDE_DIR} -+ ${QT_INCLUDE_DIR} -+ ${ZLIB_INCLUDE_DIR} -+ ${SOQT_INCLUDE_DIR} -+ ${PYTHON_INCLUDE_PATH} -+ ${XERCESC_INCLUDE_DIR} -+) -+ -+set(ImageGui_LIBS -+ Image -+ FreeCADGui -+ #${OpenCV_LIBRARIES} -+ ${OPENGL_glu_LIBRARY} -+) -+ -+set(ImageGui_MOC_HDRS -+ ImageView.h -+ GLImageBox.h -+) -+ -+fc_wrap_cpp(ImageGui_MOC_SRCS ${ImageGui_MOC_HDRS}) -+SOURCE_GROUP("Moc" FILES ${ImageGui_MOC_SRCS}) -+ -+SET(ImageGui_RES_SRCS -+ Resources/Image.qrc -+) -+ -+fc_add_resources(ImageGui_QRC_SRCS ${ImageGui_RES_SRCS}) -+#QT4_ADD_RESOURCES(ImageGui_QRC_SRCS ${ImageGui_RES_SRCS}) -+ -+SET(ImageGui_SRCS -+# ${ImageGui_MOC_SRCS} -+# ${ImageGui_QRC_SRCS} -+ AppImageGui.cpp -+ AppImageGuiPy.cpp -+ Command.cpp -+ ViewProviderImagePlane.cpp -+ ViewProviderImagePlane.h -+ GLImageBox.cpp -+ GLImageBox.h -+ Resources/Image.qrc -+ ImageView.cpp -+ ImageView.h -+ PreCompiled.cpp -+ PreCompiled.h -+ Workbench.cpp -+ Workbench.h -+ XpmImages.h -+) -+ -+add_library(ImageGui SHARED ${ImageGui_SRCS}) -+target_link_libraries(ImageGui ${ImageGui_LIBS}) -+ -+ -+fc_target_copy_resource(ImageGui -+ ${CMAKE_SOURCE_DIR}/src/Mod/Image -+ ${CMAKE_BINARY_DIR}/Mod/Image -+ InitGui.py) -+ -+if(MSVC) -+ set_target_properties(ImageGui PROPERTIES SUFFIX ".pyd") -+ set_target_properties(ImageGui PROPERTIES DEBUG_OUTPUT_NAME "ImageGui_d") -+ set_target_properties(ImageGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Image) -+ set_target_properties(ImageGui PROPERTIES PREFIX "../") -+elseif(MINGW) -+ set_target_properties(ImageGui PROPERTIES SUFFIX ".pyd") -+ set_target_properties(ImageGui PROPERTIES DEBUG_OUTPUT_NAME "ImageGui_d") -+ set_target_properties(ImageGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Image) -+ set_target_properties(ImageGui PROPERTIES PREFIX "") -+else(MSVC) -+ set_target_properties(ImageGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Image) -+ set_target_properties(ImageGui PROPERTIES PREFIX "") -+ set_target_properties(ImageGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) -+endif(MSVC) -+ -+INSTALL(TARGETS ImageGui DESTINATION lib) -diff -Naur freecad-0.13.1830.orig/src/Mod/Mesh/Gui/AppMeshGui.cpp freecad-0.13.1830/src/Mod/Mesh/Gui/AppMeshGui.cpp ---- freecad-0.13.1830.orig/src/Mod/Mesh/Gui/AppMeshGui.cpp 2013-10-25 18:49:34.608995076 +0200 -+++ freecad-0.13.1830/src/Mod/Mesh/Gui/AppMeshGui.cpp 2013-10-25 18:49:59.455527138 +0200 -@@ -49,7 +49,7 @@ - #include "ViewProviderDefects.h"
- #include "ViewProviderPython.h"
- #include "Workbench.h"
--#include "qrc_Mesh.cpp"
-+#include "qrc_Mesh.cxx"
-
-
- // use a different name to CreateCommand()
-diff -Naur freecad-0.13.1830.orig/src/Mod/Mesh/Gui/AppMeshGui.cpp.orig freecad-0.13.1830/src/Mod/Mesh/Gui/AppMeshGui.cpp.orig ---- freecad-0.13.1830.orig/src/Mod/Mesh/Gui/AppMeshGui.cpp.orig 1970-01-01 01:00:00.000000000 +0100 -+++ freecad-0.13.1830/src/Mod/Mesh/Gui/AppMeshGui.cpp.orig 2013-02-02 18:09:17.000000000 +0100 -@@ -0,0 +1,142 @@ -+/***************************************************************************
-+ * Copyright (c) 2004 Werner Mayer <wmayer[at]users.sourceforge.net> *
-+ * *
-+ * This file is part of the FreeCAD CAx development system. *
-+ * *
-+ * This library is free software; you can redistribute it and/or *
-+ * modify it under the terms of the GNU Library General Public *
-+ * License as published by the Free Software Foundation; either *
-+ * version 2 of the License, or (at your option) any later version. *
-+ * *
-+ * This library is distributed in the hope that it will be useful, *
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
-+ * GNU Library General Public License for more details. *
-+ * *
-+ * You should have received a copy of the GNU Library General Public *
-+ * License along with this library; see the file COPYING.LIB. If not, *
-+ * write to the Free Software Foundation, Inc., 59 Temple Place, *
-+ * Suite 330, Boston, MA 02111-1307, USA *
-+ * *
-+ ***************************************************************************/
-+
-+
-+#include "PreCompiled.h"
-+#ifndef _PreComp_
-+#endif
-+
-+#include <Base/Interpreter.h>
-+#include <Base/Console.h>
-+
-+#include <Gui/Application.h>
-+#include <Gui/BitmapFactory.h>
-+#include <Gui/WidgetFactory.h>
-+#include <Gui/Language/Translator.h>
-+
-+#include <Mod/Mesh/App/MeshProperties.h>
-+
-+#include "images.h"
-+#include "DlgEvaluateMeshImp.h"
-+#include "PropertyEditorMesh.h"
-+#include "DlgSettingsMeshView.h"
-+#include "SoFCMeshObject.h"
-+#include "SoFCIndexedFaceSet.h"
-+#include "ViewProvider.h"
-+#include "ViewProviderMeshFaceSet.h"
-+#include "ViewProviderCurvature.h"
-+#include "ViewProviderTransform.h"
-+#include "ViewProviderTransformDemolding.h"
-+#include "ViewProviderDefects.h"
-+#include "ViewProviderPython.h"
-+#include "Workbench.h"
-+#include "qrc_Mesh.cpp"
-+
-+
-+// use a different name to CreateCommand()
-+void CreateMeshCommands(void);
-+
-+void loadMeshResource()
-+{
-+ // add resources and reloads the translators
-+ Q_INIT_RESOURCE(Mesh);
-+ Gui::Translator::instance()->refresh();
-+}
-+
-+/* registration table */
-+static struct PyMethodDef MeshGui_methods[] = {
-+ {NULL, NULL} /* end of table marker */
-+};
-+
-+/* Python entry */
-+extern "C" {
-+void MeshGuiExport initMeshGui()
-+{
-+ if (!Gui::Application::Instance) {
-+ PyErr_SetString(PyExc_ImportError, "Cannot load Gui module in console application.");
-+ return;
-+ }
-+
-+ // load dependent module
-+ try {
-+ Base::Interpreter().loadModule("Mesh");
-+ }
-+ catch(const Base::Exception& e) {
-+ PyErr_SetString(PyExc_ImportError, e.what());
-+ return;
-+ }
-+ (void) Py_InitModule("MeshGui", MeshGui_methods); /* mod name, table ptr */
-+ Base::Console().Log("Loading GUI of Mesh module... done\n");
-+
-+ // Register icons
-+ Gui::BitmapFactory().addXPM("curv_info", curv_info);
-+ Gui::BitmapFactory().addXPM("import_mesh", import_mesh);
-+ Gui::BitmapFactory().addXPM("export_mesh", export_mesh);
-+ Gui::BitmapFactory().addXPM("solid_mesh", solid_mesh);
-+ Gui::BitmapFactory().addXPM("mesh_fillhole", mesh_fillhole);
-+ Gui::BitmapFactory().addXPM("mesh_pipette", mesh_pipette);
-+
-+ // instantiating the commands
-+ CreateMeshCommands();
-+ (void)new MeshGui::CleanupHandler;
-+
-+ // register preferences pages
-+ (void)new Gui::PrefPageProducer<MeshGui::DlgSettingsMeshView> ("Display");
-+
-+ MeshGui::SoFCMeshObjectElement ::initClass();
-+ MeshGui::SoSFMeshObject ::initClass();
-+ MeshGui::SoFCMeshObjectNode ::initClass();
-+ MeshGui::SoFCMeshObjectShape ::initClass();
-+ MeshGui::SoFCMeshSegmentShape ::initClass();
-+ MeshGui::SoFCMeshObjectBoundary ::initClass();
-+ MeshGui::SoFCIndexedFaceSet ::initClass();
-+ MeshGui::SoFCMeshPickNode ::initClass();
-+ MeshGui::SoFCMeshGridNode ::initClass();
-+ MeshGui::PropertyMeshKernelItem ::init();
-+ MeshGui::ViewProviderMesh ::init();
-+ MeshGui::ViewProviderMeshObject ::init();
-+ MeshGui::ViewProviderIndexedFaceSet ::init();
-+ MeshGui::ViewProviderMeshFaceSet ::init();
-+ MeshGui::ViewProviderPython ::init();
-+ MeshGui::ViewProviderExport ::init();
-+ MeshGui::ViewProviderMeshCurvature ::init();
-+ MeshGui::ViewProviderMeshTransform ::init();
-+ MeshGui::ViewProviderMeshTransformDemolding ::init();
-+ MeshGui::ViewProviderMeshDefects ::init();
-+ MeshGui::ViewProviderMeshOrientation ::init();
-+ MeshGui::ViewProviderMeshNonManifolds ::init();
-+ MeshGui::ViewProviderMeshDuplicatedFaces ::init();
-+ MeshGui::ViewProviderMeshDuplicatedPoints ::init();
-+ MeshGui::ViewProviderMeshDegenerations ::init();
-+ MeshGui::ViewProviderMeshIndices ::init();
-+ MeshGui::ViewProviderMeshSelfIntersections ::init();
-+ MeshGui::ViewProviderMeshFolds ::init();
-+ MeshGui::Workbench ::init();
-+ Gui::ViewProviderBuilder::add(
-+ Mesh::PropertyMeshKernel::getClassTypeId(),
-+ MeshGui::ViewProviderMeshFaceSet::getClassTypeId());
-+
-+ // add resources and reloads the translators
-+ loadMeshResource();
-+}
-+
-+} // extern "C" {
-diff -Naur freecad-0.13.1830.orig/src/Mod/Mesh/Gui/CMakeLists.txt freecad-0.13.1830/src/Mod/Mesh/Gui/CMakeLists.txt ---- freecad-0.13.1830.orig/src/Mod/Mesh/Gui/CMakeLists.txt 2013-10-25 18:49:34.608995076 +0200 -+++ freecad-0.13.1830/src/Mod/Mesh/Gui/CMakeLists.txt 2013-10-25 18:49:59.455527138 +0200 -@@ -68,7 +68,7 @@ - ) - SOURCE_GROUP("Inventor" FILES ${Inventor_SRCS}) - --fc_add_resources(resource_SRCS Resources/Mesh.qrc) -+qt4_add_resources(resource_SRCS Resources/Mesh.qrc) - SET(resource_SRCS - # ${resource_SRCS} - Resources/Mesh.qrc -diff -Naur freecad-0.13.1830.orig/src/Mod/Mesh/Gui/CMakeLists.txt.orig freecad-0.13.1830/src/Mod/Mesh/Gui/CMakeLists.txt.orig ---- freecad-0.13.1830.orig/src/Mod/Mesh/Gui/CMakeLists.txt.orig 1970-01-01 01:00:00.000000000 +0100 -+++ freecad-0.13.1830/src/Mod/Mesh/Gui/CMakeLists.txt.orig 2013-02-02 18:09:17.000000000 +0100 -@@ -0,0 +1,139 @@ -+include_directories( -+ ${CMAKE_CURRENT_BINARY_DIR} -+ ${Boost_INCLUDE_DIRS} -+ ${COIN3D_INCLUDE_DIR} -+ ${PYTHON_INCLUDE_PATH} -+ ${ZLIB_INCLUDE_DIR} -+ ${SOQT_INCLUDE_DIR} -+ ${QT_INCLUDE_DIR} -+ ${XERCESC_INCLUDE_DIR} -+) -+ -+set(MeshGui_LIBS -+ ${Boost_LIBRARIES} -+ ${OPENGL_glu_LIBRARY} -+ Mesh -+ FreeCADGui -+) -+ -+set(Mesh_MOC_HDRS -+ DlgEvaluateMeshImp.h -+ DlgRegularSolidImp.h -+ DlgSettingsMeshView.h -+ DlgSmoothing.h -+ MeshEditor.h -+ PropertyEditorMesh.h -+ RemoveComponents.h -+) -+fc_wrap_cpp(Mesh_MOC_SRCS ${Mesh_MOC_HDRS}) -+SOURCE_GROUP("Moc" FILES ${Mesh_MOC_SRCS}) -+ -+set(Dialogs_UIC_SRCS -+ DlgEvaluateMesh.ui -+ DlgRegularSolid.ui -+ DlgSettingsMeshView.ui -+ DlgSmoothing.ui -+ RemoveComponents.ui -+ Segmentation.ui -+) -+qt4_wrap_ui(Dialogs_UIC_HDRS ${Dialogs_UIC_SRCS}) -+SET(Dialogs_SRCS -+ ${Dialogs_UIC_HDRS} -+ DlgEvaluateMesh.ui -+ DlgEvaluateMeshImp.cpp -+ DlgEvaluateMeshImp.h -+ DlgRegularSolid.ui -+ DlgRegularSolidImp.cpp -+ DlgRegularSolidImp.h -+ DlgSettingsMeshView.ui -+ DlgSettingsMeshView.cpp -+ DlgSettingsMeshView.h -+ DlgSmoothing.ui -+ DlgSmoothing.cpp -+ DlgSmoothing.h -+ RemoveComponents.ui -+ RemoveComponents.cpp -+ RemoveComponents.h -+ Segmentation.ui -+ Segmentation.cpp -+ Segmentation.h -+) -+SOURCE_GROUP("Dialogs" FILES ${Dialogs_SRCS}) -+ -+SET(Inventor_SRCS -+ SoFCIndexedFaceSet.cpp -+ SoFCIndexedFaceSet.h -+ SoFCMeshObject.cpp -+ SoFCMeshObject.h -+) -+SOURCE_GROUP("Inventor" FILES ${Inventor_SRCS}) -+ -+fc_add_resources(resource_SRCS Resources/Mesh.qrc) -+SET(resource_SRCS -+# ${resource_SRCS} -+ Resources/Mesh.qrc -+) -+SOURCE_GROUP("resource" FILES ${resource_SRCS}) -+ -+SET(ViewProvider_SRCS -+ ViewProvider.cpp -+ ViewProvider.h -+ ViewProviderPython.cpp -+ ViewProviderPython.h -+ ViewProviderCurvature.cpp -+ ViewProviderCurvature.h -+ ViewProviderDefects.cpp -+ ViewProviderDefects.h -+ ViewProviderMeshFaceSet.cpp -+ ViewProviderMeshFaceSet.h -+ ViewProviderTransform.cpp -+ ViewProviderTransform.h -+ ViewProviderTransformDemolding.cpp -+ ViewProviderTransformDemolding.h -+) -+SOURCE_GROUP("ViewProvider" FILES ${ViewProvider_SRCS}) -+ -+SET(MeshGui_SRCS -+ ${Dialogs_SRCS} -+ ${Inventor_SRCS} -+ ${resource_SRCS} -+ ${ViewProvider_SRCS} -+ AppMeshGui.cpp -+ Command.cpp -+ Doxygen.cpp -+ PreCompiled.cpp -+ PreCompiled.h -+ MeshEditor.cpp -+ MeshEditor.h -+ PropertyEditorMesh.cpp -+ PropertyEditorMesh.h -+ Workbench.cpp -+ Workbench.h -+) -+ -+add_library(MeshGui SHARED ${MeshGui_SRCS}) -+target_link_libraries(MeshGui ${MeshGui_LIBS}) -+ -+ -+fc_target_copy_resource(MeshGui -+ ${CMAKE_SOURCE_DIR}/src/Mod/Mesh -+ ${CMAKE_BINARY_DIR}/Mod/Mesh -+ InitGui.py) -+ -+if(MSVC) -+ set_target_properties(MeshGui PROPERTIES SUFFIX ".pyd") -+ set_target_properties(MeshGui PROPERTIES DEBUG_OUTPUT_NAME "MeshGui_d") -+ set_target_properties(MeshGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Mesh) -+ set_target_properties(MeshGui PROPERTIES PREFIX "../") -+elseif(MINGW) -+ set_target_properties(MeshGui PROPERTIES SUFFIX ".pyd") -+ set_target_properties(MeshGui PROPERTIES DEBUG_OUTPUT_NAME "MeshGui_d") -+ set_target_properties(MeshGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Mesh) -+ set_target_properties(MeshGui PROPERTIES PREFIX "") -+else(MSVC) -+ set_target_properties(MeshGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Mesh) -+ set_target_properties(MeshGui PROPERTIES PREFIX "") -+ set_target_properties(MeshGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) -+endif(MSVC) -+ -+INSTALL(TARGETS MeshGui DESTINATION lib) -diff -Naur freecad-0.13.1830.orig/src/Mod/Part/Gui/AppPartGui.cpp freecad-0.13.1830/src/Mod/Part/Gui/AppPartGui.cpp ---- freecad-0.13.1830.orig/src/Mod/Part/Gui/AppPartGui.cpp 2013-10-25 18:49:34.705661219 +0200 -+++ freecad-0.13.1830/src/Mod/Part/Gui/AppPartGui.cpp 2013-10-25 18:49:59.455527138 +0200 -@@ -42,7 +42,7 @@ - #include "Workbench.h"
-
- #include <Gui/Language/Translator.h>
--#include "qrc_Part.cpp"
-+#include "qrc_Part.cxx"
-
- #include "Resources/icons/PartFeature.xpm"
- #include "Resources/icons/PartFeatureImport.xpm"
-diff -Naur freecad-0.13.1830.orig/src/Mod/Part/Gui/AppPartGui.cpp.orig freecad-0.13.1830/src/Mod/Part/Gui/AppPartGui.cpp.orig ---- freecad-0.13.1830.orig/src/Mod/Part/Gui/AppPartGui.cpp.orig 1970-01-01 01:00:00.000000000 +0100 -+++ freecad-0.13.1830/src/Mod/Part/Gui/AppPartGui.cpp.orig 2013-02-02 18:09:17.000000000 +0100 -@@ -0,0 +1,138 @@ -+/***************************************************************************
-+ * *
-+ * This program is free software; you can redistribute it and/or modify *
-+ * it under the terms of the GNU Library General Public License as *
-+ * published by the Free Software Foundation; either version 2 of the *
-+ * License, or (at your option) any later version. *
-+ * for detail see the LICENCE text file. *
-+ * Jürgen Riegel 2002 *
-+ * *
-+ ***************************************************************************/
-+
-+
-+#include "PreCompiled.h"
-+#ifndef _PreComp_
-+# include <Standard_math.hxx>
-+#endif
-+
-+#include <Base/Console.h>
-+#include <Base/Interpreter.h>
-+
-+#include <Gui/Application.h>
-+#include <Gui/BitmapFactory.h>
-+#include <Gui/WidgetFactory.h>
-+
-+#include <Mod/Part/App/PropertyTopoShape.h>
-+
-+#include "SoBrepShape.h"
-+#include "SoFCShapeObject.h"
-+#include "ViewProvider.h"
-+#include "ViewProviderExt.h"
-+#include "ViewProviderPython.h"
-+#include "ViewProviderBox.h"
-+#include "ViewProviderCurveNet.h"
-+#include "ViewProviderImport.h"
-+#include "ViewProviderExtrusion.h"
-+#include "ViewProvider2DObject.h"
-+#include "ViewProviderMirror.h"
-+#include "ViewProviderBoolean.h"
-+
-+#include "DlgSettingsGeneral.h"
-+#include "DlgSettings3DViewPartImp.h"
-+#include "Workbench.h"
-+
-+#include <Gui/Language/Translator.h>
-+#include "qrc_Part.cpp"
-+
-+#include "Resources/icons/PartFeature.xpm"
-+#include "Resources/icons/PartFeatureImport.xpm"
-+
-+// use a different name to CreateCommand()
-+void CreatePartCommands(void);
-+void CreateSimplePartCommands(void);
-+void CreateParamPartCommands(void);
-+
-+void loadPartResource()
-+{
-+ // add resources and reloads the translators
-+ Q_INIT_RESOURCE(Part);
-+ Gui::Translator::instance()->refresh();
-+}
-+
-+/* registration table */
-+static struct PyMethodDef PartGui_methods[] = {
-+ {NULL, NULL} /* end of table marker */
-+};
-+
-+extern "C" {
-+void PartGuiExport initPartGui()
-+{
-+ if (!Gui::Application::Instance) {
-+ PyErr_SetString(PyExc_ImportError, "Cannot load Gui module in console application.");
-+ return;
-+ }
-+
-+ // load needed modules
-+ try {
-+ Base::Interpreter().runString("import Part");
-+ }
-+ catch(const Base::Exception& e) {
-+ PyErr_SetString(PyExc_ImportError, e.what());
-+ return;
-+ }
-+
-+ (void) Py_InitModule("PartGui", PartGui_methods); /* mod name, table ptr */
-+ Base::Console().Log("Loading GUI of Part module... done\n");
-+
-+ PartGui::SoBrepFaceSet ::initClass();
-+ PartGui::SoBrepEdgeSet ::initClass();
-+ PartGui::SoBrepPointSet ::initClass();
-+ PartGui::SoFCControlPoints ::initClass();
-+ PartGui::ViewProviderPartBase ::init();
-+ PartGui::ViewProviderPartExt ::init();
-+ PartGui::ViewProviderPart ::init();
-+ PartGui::ViewProviderEllipsoid ::init();
-+ PartGui::ViewProviderPython ::init();
-+ PartGui::ViewProviderBox ::init();
-+ PartGui::ViewProviderImport ::init();
-+ PartGui::ViewProviderCurveNet ::init();
-+ PartGui::ViewProviderExtrusion ::init();
-+ PartGui::ViewProvider2DObject ::init();
-+ PartGui::ViewProvider2DObjectPython ::init();
-+ PartGui::ViewProviderMirror ::init();
-+ PartGui::ViewProviderFillet ::init();
-+ PartGui::ViewProviderChamfer ::init();
-+ PartGui::ViewProviderRevolution ::init();
-+ PartGui::ViewProviderLoft ::init();
-+ PartGui::ViewProviderSweep ::init();
-+ PartGui::ViewProviderOffset ::init();
-+ PartGui::ViewProviderThickness ::init();
-+ PartGui::ViewProviderCustom ::init();
-+ PartGui::ViewProviderCustomPython ::init();
-+ PartGui::ViewProviderBoolean ::init();
-+ PartGui::ViewProviderMultiFuse ::init();
-+ PartGui::ViewProviderMultiCommon ::init();
-+
-+ PartGui::Workbench ::init();
-+
-+ // instantiating the commands
-+ CreatePartCommands();
-+ CreateSimplePartCommands();
-+ CreateParamPartCommands();
-+
-+ // register preferences pages
-+ (void)new Gui::PrefPageProducer<PartGui::DlgSettingsGeneral> ( QT_TRANSLATE_NOOP("QObject","Part design") );
-+ (void)new Gui::PrefPageProducer<PartGui::DlgSettings3DViewPart> ( QT_TRANSLATE_NOOP("QObject","Part design") );
-+ Gui::ViewProviderBuilder::add(
-+ Part::PropertyPartShape::getClassTypeId(),
-+ PartGui::ViewProviderPart::getClassTypeId());
-+
-+ // add resources and reloads the translators
-+ loadPartResource();
-+
-+ // register bitmaps
-+ Gui::BitmapFactoryInst& rclBmpFactory = Gui::BitmapFactory();
-+ rclBmpFactory.addXPM("PartFeature",(const char**) PartFeature_xpm);
-+ rclBmpFactory.addXPM("PartFeatureImport",(const char**) PartFeatureImport_xpm);
-+}
-+} // extern "C"
-diff -Naur freecad-0.13.1830.orig/src/Mod/Part/Gui/CMakeLists.txt freecad-0.13.1830/src/Mod/Part/Gui/CMakeLists.txt ---- freecad-0.13.1830.orig/src/Mod/Part/Gui/CMakeLists.txt 2013-10-25 18:49:34.705661219 +0200 -+++ freecad-0.13.1830/src/Mod/Part/Gui/CMakeLists.txt 2013-10-25 18:49:59.455527138 +0200 -@@ -49,7 +49,7 @@ - fc_wrap_cpp(PartGui_MOC_SRCS ${PartGui_MOC_HDRS}) - SOURCE_GROUP("Moc" FILES ${PartGui_MOC_SRCS}) - --fc_add_resources(PartGui_QRC_SRCS Resources/Part.qrc) -+qt4_add_resources(PartGui_QRC_SRCS Resources/Part.qrc) - - set(PartGui_UIC_SRCS - CrossSections.ui -diff -Naur freecad-0.13.1830.orig/src/Mod/Part/Gui/CMakeLists.txt.orig freecad-0.13.1830/src/Mod/Part/Gui/CMakeLists.txt.orig ---- freecad-0.13.1830.orig/src/Mod/Part/Gui/CMakeLists.txt.orig 1970-01-01 01:00:00.000000000 +0100 -+++ freecad-0.13.1830/src/Mod/Part/Gui/CMakeLists.txt.orig 2013-02-02 18:09:17.000000000 +0100 -@@ -0,0 +1,207 @@ -+if(MSVC) -+ add_definitions(-DHAVE_ACOSH -DHAVE_ATANH -DHAVE_ASINH) -+else(MSVC) -+ add_definitions(-DHAVE_LIMITS_H -DHAVE_CONFIG_H) -+endif(MSVC) -+ -+include_directories( -+ ${CMAKE_SOURCE_DIR}/src -+ ${CMAKE_BINARY_DIR}/src -+ ${CMAKE_CURRENT_BINARY_DIR} -+ ${Boost_INCLUDE_DIRS} -+ ${COIN3D_INCLUDE_DIR} -+ ${OCC_INCLUDE_DIR} -+ ${PYTHON_INCLUDE_PATH} -+ ${SOQT_INCLUDE_DIR} -+ ${QT_INCLUDE_DIR} -+ ${XERCESC_INCLUDE_DIR} -+ ${ZLIB_INCLUDE_DIR} -+) -+link_directories(${OCC_LIBRARY_DIR}) -+ -+set(PartGui_LIBS -+ Part -+ FreeCADGui -+) -+ -+set(PartGui_MOC_HDRS -+ CrossSections.h -+ Mirroring.h -+ DlgBooleanOperation.h -+ DlgExtrusion.h -+ DlgFilletEdges.h -+ DlgPartBoxImp.h -+ DlgPartCylinderImp.h -+ DlgPartImportIgesImp.h -+ DlgPartImportStepImp.h -+ DlgPrimitives.h -+ DlgRevolution.h -+ DlgSettings3DViewPartImp.h -+ DlgSettingsGeneral.h -+ TaskFaceColors.h -+ TaskShapeBuilder.h -+ TaskLoft.h -+ TaskOffset.h -+ TaskSweep.h -+ TaskThickness.h -+ TaskCheckGeometry.h -+) -+fc_wrap_cpp(PartGui_MOC_SRCS ${PartGui_MOC_HDRS}) -+SOURCE_GROUP("Moc" FILES ${PartGui_MOC_SRCS}) -+ -+fc_add_resources(PartGui_QRC_SRCS Resources/Part.qrc) -+ -+set(PartGui_UIC_SRCS -+ CrossSections.ui -+ Mirroring.ui -+ DlgBooleanOperation.ui -+ DlgExtrusion.ui -+ DlgFilletEdges.ui -+ DlgPartBox.ui -+ DlgPartCylinder.ui -+ DlgPartImportIges.ui -+ DlgPartImportStep.ui -+ DlgPrimitives.ui -+ Location.ui -+ DlgRevolution.ui -+ DlgSettings3DViewPart.ui -+ DlgSettingsGeneral.ui -+ TaskFaceColors.ui -+ TaskShapeBuilder.ui -+ TaskLoft.ui -+ TaskOffset.ui -+ TaskSweep.ui -+) -+qt4_wrap_ui(PartGui_UIC_HDRS ${PartGui_UIC_SRCS}) -+ -+SET(PartGui_SRCS -+# ${PartGui_QRC_SRCS} -+ ${PartGui_UIC_HDRS} -+ AppPartGui.cpp -+ Command.cpp -+ CommandSimple.cpp -+ CommandParametric.cpp -+ CrossSections.cpp -+ CrossSections.h -+ CrossSections.ui -+ Mirroring.cpp -+ Mirroring.h -+ Mirroring.ui -+ DlgBooleanOperation.cpp -+ DlgBooleanOperation.h -+ DlgBooleanOperation.ui -+ DlgExtrusion.cpp -+ DlgExtrusion.h -+ DlgExtrusion.ui -+ DlgFilletEdges.cpp -+ DlgFilletEdges.h -+ DlgFilletEdges.ui -+ DlgPartBox.ui -+ DlgPartBoxImp.cpp -+ DlgPartBoxImp.h -+ DlgPartCylinderImp.cpp -+ DlgPartCylinderImp.h -+ DlgPartCylinder.ui -+ DlgPartImportIges.ui -+ DlgPartImportIgesImp.cpp -+ DlgPartImportIgesImp.h -+ DlgPartImportStep.ui -+ DlgPartImportStepImp.cpp -+ DlgPartImportStepImp.h -+ DlgPrimitives.cpp -+ DlgPrimitives.h -+ DlgPrimitives.ui -+ Location.ui -+ DlgRevolution.cpp -+ DlgRevolution.h -+ DlgRevolution.ui -+ DlgSettings3DViewPart.ui -+ DlgSettings3DViewPartImp.cpp -+ DlgSettings3DViewPartImp.h -+ DlgSettingsGeneral.cpp -+ DlgSettingsGeneral.h -+ DlgSettingsGeneral.ui -+ Resources/Part.qrc -+ PreCompiled.cpp -+ PreCompiled.h -+ SoFCShapeObject.cpp -+ SoFCShapeObject.h -+ SoBrepShape.cpp -+ SoBrepShape.h -+ ViewProvider.cpp -+ ViewProvider.h -+ ViewProviderExt.cpp -+ ViewProviderExt.h -+ ViewProviderReference.cpp -+ ViewProviderReference.h -+ ViewProviderBox.cpp -+ ViewProviderBox.h -+ ViewProviderCurveNet.cpp -+ ViewProviderCurveNet.h -+ ViewProviderImport.cpp -+ ViewProviderImport.h -+ ViewProviderExtrusion.cpp -+ ViewProviderExtrusion.h -+ ViewProvider2DObject.cpp -+ ViewProvider2DObject.h -+ ViewProviderMirror.cpp -+ ViewProviderMirror.h -+ ViewProviderPython.cpp -+ ViewProviderPython.h -+ ViewProviderBoolean.cpp -+ ViewProviderBoolean.h -+ Workbench.cpp -+ Workbench.h -+ TaskFaceColors.cpp -+ TaskFaceColors.h -+ TaskFaceColors.ui -+ TaskShapeBuilder.cpp -+ TaskShapeBuilder.h -+ TaskShapeBuilder.ui -+ TaskLoft.cpp -+ TaskLoft.h -+ TaskLoft.ui -+ TaskOffset.cpp -+ TaskOffset.h -+ TaskOffset.ui -+ TaskSweep.cpp -+ TaskSweep.h -+ TaskSweep.ui -+ TaskThickness.cpp -+ TaskThickness.h -+ TaskCheckGeometry.cpp -+ TaskCheckGeometry.h -+) -+ -+SET(PartGui_Scripts -+ InitGui.py -+ TestPartGui.py -+) -+ -+ -+add_library(PartGui SHARED ${PartGui_SRCS}) -+target_link_libraries(PartGui ${PartGui_LIBS}) -+ -+ -+fc_target_copy_resource(PartGui -+ ${CMAKE_SOURCE_DIR}/src/Mod/Part -+ ${CMAKE_BINARY_DIR}/Mod/Part -+ ${PartGui_Scripts}) -+ -+if(MSVC) -+ set_target_properties(PartGui PROPERTIES SUFFIX ".pyd") -+ set_target_properties(PartGui PROPERTIES DEBUG_OUTPUT_NAME "PartGui_d") -+ set_target_properties(PartGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Part) -+ set_target_properties(PartGui PROPERTIES PREFIX "../") -+elseif(MINGW) -+ set_target_properties(PartGui PROPERTIES SUFFIX ".pyd") -+ set_target_properties(PartGui PROPERTIES DEBUG_OUTPUT_NAME "PartGui_d") -+ set_target_properties(PartGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Part) -+ set_target_properties(PartGui PROPERTIES PREFIX "") -+else(MSVC) -+ set_target_properties(PartGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Part) -+ set_target_properties(PartGui PROPERTIES PREFIX "") -+ set_target_properties(PartGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) -+endif(MSVC) -+ -+INSTALL(TARGETS PartGui DESTINATION lib) -diff -Naur freecad-0.13.1830.orig/src/Mod/Points/Gui/AppPointsGui.cpp freecad-0.13.1830/src/Mod/Points/Gui/AppPointsGui.cpp ---- freecad-0.13.1830.orig/src/Mod/Points/Gui/AppPointsGui.cpp 2013-10-25 18:49:34.868993668 +0200 -+++ freecad-0.13.1830/src/Mod/Points/Gui/AppPointsGui.cpp 2013-10-25 18:49:59.455527138 +0200 -@@ -33,7 +33,7 @@ -
- #include "ViewProvider.h"
- #include "Workbench.h"
--#include "qrc_Points.cpp"
-+#include "qrc_Points.cxx"
-
- // use a different name to CreateCommand()
- void CreatePointsCommands(void);
-diff -Naur freecad-0.13.1830.orig/src/Mod/Points/Gui/CMakeLists.txt freecad-0.13.1830/src/Mod/Points/Gui/CMakeLists.txt ---- freecad-0.13.1830.orig/src/Mod/Points/Gui/CMakeLists.txt 2013-10-25 18:49:34.868993668 +0200 -+++ freecad-0.13.1830/src/Mod/Points/Gui/CMakeLists.txt 2013-10-25 18:49:59.455527138 +0200 -@@ -32,7 +32,7 @@ - ) - SOURCE_GROUP("Dialogs" FILES ${Dialogs_SRCS}) - --fc_add_resources(Resource_SRCS Resources/Points.qrc) -+qt4_add_resources(Resource_SRCS Resources/Points.qrc) - SET(Resource_SRCS - # ${Resource_SRCS} - Resources/Points.qrc -diff -Naur freecad-0.13.1830.orig/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp freecad-0.13.1830/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp ---- freecad-0.13.1830.orig/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp 2013-10-25 18:49:34.872326983 +0200 -+++ freecad-0.13.1830/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp 2013-10-25 18:49:59.455527138 +0200 -@@ -31,7 +31,7 @@ -
- #include "DlgSettingsRayImp.h"
- #include "Workbench.h"
--#include "qrc_Raytracing.cpp"
-+#include "qrc_Raytracing.cxx"
-
-
- using namespace RaytracingGui;
-diff -Naur freecad-0.13.1830.orig/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp.orig freecad-0.13.1830/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp.orig ---- freecad-0.13.1830.orig/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp.orig 1970-01-01 01:00:00.000000000 +0100 -+++ freecad-0.13.1830/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp.orig 2013-02-02 18:09:17.000000000 +0100 -@@ -0,0 +1,81 @@ -+/***************************************************************************
-+ * Copyright (c) Jürgen Riegel (juergen.riegel@web.de) 2002 *
-+ * *
-+ * This file is part of the FreeCAD CAx development system. *
-+ * *
-+ * This library is free software; you can redistribute it and/or *
-+ * modify it under the terms of the GNU Library General Public *
-+ * License as published by the Free Software Foundation; either *
-+ * version 2 of the License, or (at your option) any later version. *
-+ * *
-+ * This library is distributed in the hope that it will be useful, *
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
-+ * GNU Library General Public License for more details. *
-+ * *
-+ * You should have received a copy of the GNU Library General Public *
-+ * License along with this library; see the file COPYING.LIB. If not, *
-+ * write to the Free Software Foundation, Inc., 59 Temple Place, *
-+ * Suite 330, Boston, MA 02111-1307, USA *
-+ * *
-+ ***************************************************************************/
-+
-+
-+#include "PreCompiled.h"
-+
-+#include <Base/Console.h>
-+#include <Base/Interpreter.h>
-+#include <Gui/Application.h>
-+#include <Gui/WidgetFactory.h>
-+#include <Gui/Language/Translator.h>
-+
-+#include "DlgSettingsRayImp.h"
-+#include "Workbench.h"
-+#include "qrc_Raytracing.cpp"
-+
-+
-+using namespace RaytracingGui;
-+
-+// use a different name to CreateCommand()
-+void CreateRaytracingCommands(void);
-+
-+void loadRaytracingResource()
-+{
-+ // add resources and reloads the translators
-+ Q_INIT_RESOURCE(Raytracing);
-+ Gui::Translator::instance()->refresh();
-+}
-+
-+extern struct PyMethodDef RaytracingGui_methods[];
-+
-+
-+extern "C" {
-+void AppRaytracingGuiExport initRaytracingGui()
-+{
-+ if (!Gui::Application::Instance) {
-+ PyErr_SetString(PyExc_ImportError, "Cannot load Gui module in console application.");
-+ return;
-+ }
-+
-+ try {
-+ Base::Interpreter().loadModule("Raytracing");
-+ }
-+ catch(const Base::Exception& e) {
-+ PyErr_SetString(PyExc_ImportError, e.what());
-+ return;
-+ }
-+ (void) Py_InitModule("RaytracingGui", RaytracingGui_methods); /* mod name, table ptr */
-+ Base::Console().Log("Loading GUI of Raytracing module... done\n");
-+
-+ // instantiating the commands
-+ CreateRaytracingCommands();
-+ RaytracingGui::Workbench::init();
-+
-+ // register preferences pages
-+ new Gui::PrefPageProducer<DlgSettingsRayImp> ("Raytracing");
-+
-+ // add resources and reloads the translators
-+ loadRaytracingResource();
-+}
-+
-+} // extern "C" {
-diff -Naur freecad-0.13.1830.orig/src/Mod/Raytracing/Gui/CMakeLists.txt freecad-0.13.1830/src/Mod/Raytracing/Gui/CMakeLists.txt ---- freecad-0.13.1830.orig/src/Mod/Raytracing/Gui/CMakeLists.txt 2013-10-25 18:49:34.872326983 +0200 -+++ freecad-0.13.1830/src/Mod/Raytracing/Gui/CMakeLists.txt 2013-10-25 18:49:59.455527138 +0200 -@@ -43,7 +43,7 @@ - fc_wrap_cpp(RaytracingGui_MOC_SRCS ${RaytracingGui_MOC_HDRS}) - SOURCE_GROUP("Moc" FILES ${RaytracingGui_MOC_SRCS}) - --fc_add_resources(Resource_SRCS Resources/Raytracing.qrc) -+qt4_add_resources(Resource_SRCS Resources/Raytracing.qrc) - SET(Resource_SRCS - Resources/Raytracing.qrc - ) -diff -Naur freecad-0.13.1830.orig/src/Mod/Test/Gui/AppTestGui.cpp freecad-0.13.1830/src/Mod/Test/Gui/AppTestGui.cpp ---- freecad-0.13.1830.orig/src/Mod/Test/Gui/AppTestGui.cpp 2013-10-25 18:49:35.178991988 +0200 -+++ freecad-0.13.1830/src/Mod/Test/Gui/AppTestGui.cpp 2013-10-25 18:49:59.455527138 +0200 -@@ -28,7 +28,7 @@ -
- #include "UnitTestPy.h"
- #include "UnitTestImp.h"
--#include "qrc_Test.cpp"
-+#include "qrc_Test.cxx"
-
- #include <Gui/Language/Translator.h>
- #include <Base/Console.h>
-diff -Naur freecad-0.13.1830.orig/src/Mod/Test/Gui/CMakeLists.txt freecad-0.13.1830/src/Mod/Test/Gui/CMakeLists.txt ---- freecad-0.13.1830.orig/src/Mod/Test/Gui/CMakeLists.txt 2013-10-25 18:49:35.178991988 +0200 -+++ freecad-0.13.1830/src/Mod/Test/Gui/CMakeLists.txt 2013-10-25 18:49:59.455527138 +0200 -@@ -30,7 +30,7 @@ - ) - SOURCE_GROUP("Dialogs" FILES ${Dialogs_SRCS}) - --fc_add_resources(Resource_SRCS Resources/Test.qrc) -+qt4_add_resources(Resource_SRCS Resources/Test.qrc) - SET(Resource_SRCS - # ${Resource_SRCS} - Resources/Test.qrc diff --git a/graphics/FreeCAD/files/no_coin3d_docs.patch b/graphics/FreeCAD/no_coin3d_docs.patch index bf6db9d20bf6c..bf6db9d20bf6c 100644 --- a/graphics/FreeCAD/files/no_coin3d_docs.patch +++ b/graphics/FreeCAD/no_coin3d_docs.patch |