7 files changed, 197 insertions, 0 deletions
diff --git a/network/NetworkManager/NetworkManager.SlackBuild b/network/NetworkManager/NetworkManager.SlackBuild
new file mode 100644
index 0000000000000..39d45a4c52305
--- /dev/null
+++ b/network/NetworkManager/NetworkManager.SlackBuild
@@ -0,0 +1,127 @@
+#!/bin/sh
+
+# Slackware build script for NetworkManager
+
+# Copyright 2010  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=NetworkManager
+VERSION=${VERSION:-0.8}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --with-pppd-plugin-dir=/usr/lib${LIBDIRSUFFIX}/pppd/2.4.5 \
+  --with-dhcp-client=dhcpcd \
+  --without-resolvconf \
+  --with-crypto=gnutls \
+  --build=$ARCH-slackware-linux
+
+# For next version
+#  --with-dhcpcd=/sbin/dhcpcd \
+#  --with-dhclient=yes \
+
+make
+make install DESTDIR=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+# Don't clobber existing rc.networkmanager
+mv $PKG/etc/rc.d/rc.networkmanager $PKG/etc/rc.d/rc.networkmanager.new
+
+# Add a 'starter' nm-system-settings.conf file
+mkdir -p $PKG/etc/NetworkManager
+cat $CWD/nm-system-settings.conf.new > \
+    $PKG/etc/NetworkManager/nm-system-settings.conf.new
+
+# This file should actually be shipped with Slackware's wpa_supplicant 
+# package, but since we missed it there (oops), we'll do it here:
+mkdir -p $PKG/usr/share/dbus-1/system-services
+cat $CWD/fi.epitest.hostap.WPASupplicant.service > \
+  $PKG/usr/share/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  AUTHORS CONTRIBUTING COPYING ChangeLog INSTALL NEWS README TODO \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/NetworkManager/NetworkManager.info b/network/NetworkManager/NetworkManager.info
new file mode 100644
index 0000000000000..18aba67c02d7d
--- /dev/null
+++ b/network/NetworkManager/NetworkManager.info
@@ -0,0 +1,10 @@
+PRGNAM="NetworkManager"
+VERSION="0.8"
+HOMEPAGE="http://projects.gnome.org/NetworkManager/"
+DOWNLOAD="ftp://ftp.gnome.org/pub/GNOME/sources/NetworkManager/0.8/NetworkManager-0.8.tar.bz2"
+MD5SUM="d343e22f132754696654511acde354c2"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Robby Workman"
+EMAIL="rw@rlworkman.net"
+APPROVED="Erik Hanson"
diff --git a/network/NetworkManager/README b/network/NetworkManager/README
new file mode 100644
index 0000000000000..7838c6215b05d
--- /dev/null
+++ b/network/NetworkManager/README
@@ -0,0 +1,8 @@
+NetworkManager attempts to keep an active network connection available at all
+times.  The point of NetworkManager is to make networking configuration and
+setup as painless and automatic as possible.  NetworkManager is intended to
+replace default route, replace other routes, set IP addresses, and in general
+configure networking as NM sees fit (with the possibility of manual override as
+necessary).  In effect, the goal of NetworkManager is to make networking Just
+Work with a minimum of user hassle, but still allow customization and a high
+level of manual network control.
diff --git a/network/NetworkManager/doinst.sh b/network/NetworkManager/doinst.sh
new file mode 100644
index 0000000000000..9179f3cddc5ec
--- /dev/null
+++ b/network/NetworkManager/doinst.sh
@@ -0,0 +1,27 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname ${NEW})/$(basename ${NEW} .new)"
+  if [ -e ${OLD} ]; then
+    cp -a ${OLD} ${NEW}.incoming
+    cat ${NEW} > ${NEW}.incoming
+    mv ${NEW}.incoming ${NEW}
+  fi
+  config ${NEW}
+}
+
+preserve_perms etc/rc.d/rc.networkmanager.new
+config etc/NetworkManager/nm-system-settings.conf.new
+
diff --git a/network/NetworkManager/fi.epitest.hostap.WPASupplicant.service b/network/NetworkManager/fi.epitest.hostap.WPASupplicant.service
new file mode 100644
index 0000000000000..a9ce1ecda63fb
--- /dev/null
+++ b/network/NetworkManager/fi.epitest.hostap.WPASupplicant.service
@@ -0,0 +1,4 @@
+[D-BUS Service]
+Name=fi.epitest.hostap.WPASupplicant
+Exec=/sbin/wpa_supplicant -u
+User=root
diff --git a/network/NetworkManager/nm-system-settings.conf.new b/network/NetworkManager/nm-system-settings.conf.new
new file mode 100644
index 0000000000000..3e3880a74a82a
--- /dev/null
+++ b/network/NetworkManager/nm-system-settings.conf.new
@@ -0,0 +1,2 @@
+[main]
+plugins=keyfile,vpn,pppd
diff --git a/network/NetworkManager/slack-desc b/network/NetworkManager/slack-desc
new file mode 100644
index 0000000000000..5da6c2ee09d8a
--- /dev/null
+++ b/network/NetworkManager/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+NetworkManager: NetworkManager (Networking that Just Works)
+NetworkManager:
+NetworkManager: NetworkManager attempts to keep an active network connection 
+NetworkManager: available at all times.  The point of NetworkManager is to make 
+NetworkManager: networking configuration and setup as painless and automatic as 
+NetworkManager: possible.  NetworkManager is intended to replace default route, 
+NetworkManager: replace other routes, set IP addresses, and in general configure 
+NetworkManager: networking as NM sees fit (with the possibility of manual override 
+NetworkManager: as necessary).  
+NetworkManager:
+NetworkManager: