9 files changed, 255 insertions, 0 deletions
diff --git a/graphics/zgv/90-svga.rules b/graphics/zgv/90-svga.rules
new file mode 100644
index 0000000000000..28d882cab100e
--- /dev/null
+++ b/graphics/zgv/90-svga.rules
@@ -0,0 +1,3 @@
+# This file was installed by the zgv package
+# Any changes will be overwritten on any upgrade to this package
+KERNEL=="svga*", MODE="0660", GROUP="video"
diff --git a/graphics/zgv/README b/graphics/zgv/README
new file mode 100644
index 0000000000000..2fb6a4e6544f3
--- /dev/null
+++ b/graphics/zgv/README
@@ -0,0 +1,12 @@
+zgv (svgalib picture viewer)
+
+zgv is a picture viewer with a thumbnail-based file selector.
+It supports most popular formats and allows panning and fit-to-screen
+methods of viewing, slideshows, scaling, gamma adjustment, etc.
+
+By default, the zgv binary is installed suid root, but we have patched
+the build to not do this.  Instead, we install a udev rules file that
+should allow non-root users who belong to the "video" group to use zgv.
+Note that you will have to "modprobe svgalib_helper" prior to using zgv.
+
+For more information, see zgvs manpage, info files and /usr/doc/zgv-*/SECURITY.
diff --git a/graphics/zgv/doinst.sh b/graphics/zgv/doinst.sh
new file mode 100644
index 0000000000000..14e052a2d5be1
--- /dev/null
+++ b/graphics/zgv/doinst.sh
@@ -0,0 +1,18 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/zgv.conf.new
+
+if [ -x usr/bin/install-info ]; then
+  chroot . /usr/bin/install-info --info-dir=/usr/info /usr/info/zgv.gz 2> /dev/null
+fi
+
diff --git a/graphics/zgv/patches/Makefile.doc.diff b/graphics/zgv/patches/Makefile.doc.diff
new file mode 100644
index 0000000000000..6188e6ebc1e79
--- /dev/null
+++ b/graphics/zgv/patches/Makefile.doc.diff
@@ -0,0 +1,10 @@
+--- doc/Makefile~	2007-10-06 08:34:47.000000000 +0200
++++ doc/Makefile	2007-10-06 08:35:21.000000000 +0200
+@@ -43,7 +43,6 @@
+ else
+ install: ../src/install-info
+ endif
+-	$(RM) /usr/share/man/man1/zgv.1* /usr/share/info/zgv*
+ 	install -m 644 zgv.1 $(MANDIR)
+ 	install -m 644 zgv zgv-? $(INFODIR)
+ # Update info `dir' file.
diff --git a/graphics/zgv/patches/Makefile.src.diff b/graphics/zgv/patches/Makefile.src.diff
new file mode 100644
index 0000000000000..075c8c851091c
--- /dev/null
+++ b/graphics/zgv/patches/Makefile.src.diff
@@ -0,0 +1,19 @@
+--- src/Makefile~	2007-10-06 08:31:49.000000000 +0200
++++ src/Makefile	2007-10-06 08:33:45.000000000 +0200
+@@ -61,14 +61,10 @@
+ # 
+ install: all
+ 	@if [ "$(BACKEND)" = SVGALIB ]; then \
+-	  echo $(RM) /usr/bin/zgv; \
+-	  $(RM) /usr/bin/zgv; \
+-	  echo install -m 4755 -o root -g root -s zgv $(BINDIR); \
+-	  install -m 4755 -o root -g root -s zgv $(BINDIR); \
++	  echo install -m 0755 -o root -g root -s zgv $(BINDIR); \
++	  install -m 0755 -o root -g root -s zgv $(BINDIR); \
+ 	fi
+ 	@if [ "$(BACKEND)" = SDL ]; then \
+-	  echo $(RM) /usr/bin/zgv-sdl; \
+-	  $(RM) /usr/bin/zgv-sdl; \
+ 	  echo install -m 755 -s zgv $(BINDIR)/zgv-sdl; \
+ 	  install -m 755 -s zgv $(BINDIR)/zgv-sdl; \
+ 	fi
diff --git a/graphics/zgv/patches/config.mk.diff b/graphics/zgv/patches/config.mk.diff
new file mode 100644
index 0000000000000..575ccb5d511ef
--- /dev/null
+++ b/graphics/zgv/patches/config.mk.diff
@@ -0,0 +1,57 @@
+--- config.mk~	2007-10-06 08:28:56.000000000 +0200
++++ config.mk	2007-10-06 08:31:02.000000000 +0200
+@@ -8,7 +8,7 @@
+ # This is likely to be what you'll want for most systems:
+ #
+ CC=gcc
+-CFLAGS=-O2 -Wall -fomit-frame-pointer -finline-functions
++CFLAGS=$(SLKCFLAGS) -Wall -fomit-frame-pointer -finline-functions
+ #
+ # If you're brave enough to try compiling zgv on a non-x86 system :-),
+ # this might be a better bet:
+@@ -37,7 +37,7 @@
+ # MANDIR to directory for man page.
+ # Usually it will be simpler to just set PREFIX.
+ #
+-PREFIX=/usr/local
++PREFIX=/usr
+ 
+ # In theory it would be nice to put the info file and man page under
+ # /usr/local/share. However, it's not clear if this is widely
+@@ -52,14 +52,14 @@
+ #
+ #SHARE_INFIX=/share
+ 
+-BINDIR=$(PREFIX)/bin
+-INFODIR=$(PREFIX)$(SHARE_INFIX)/info
+-MANDIR=$(PREFIX)$(SHARE_INFIX)/man/man1
++BINDIR=$(DESTDIR)/$(PREFIX)/bin
++INFODIR=$(DESTDIR)/$(PREFIX)$(SHARE_INFIX)/info
++MANDIR=$(DESTDIR)/$(PREFIX)$(SHARE_INFIX)/man/man1
+ 
+ # Set the location/filename of the system-wide configuration file. You
+ # may prefer to have this under /etc, for example.
+ #
+-RCFILE=$(PREFIX)/etc/zgv.conf
++RCFILE=$(DESTDIR)/etc/zgv.conf
+ 
+ 
+ # Normally `make install' will update your `dir' file (in INFODIR),
+@@ -73,7 +73,7 @@
+ #
+ # If you don't know what to do, leave it as-is.
+ #
+-#INFO_DIR_UPDATE=no
++INFO_DIR_UPDATE=no
+ 
+ 
+ # ------------------- Format-related options ----------------------
+@@ -91,7 +91,7 @@
+ # colours will be recognised, which will mean many XPMs won't be
+ # readable. This setting should be ok.
+ #
+-RGB_DB=/usr/X11R6/lib/X11/rgb.txt
++RGB_DB=/usr/share/X11/rgb.txt
+ 
+ # Finally, an option for `make dvi' in the `doc' directory. You only need
+ # worry about what this is set to if you plan to make a printed manual.
diff --git a/graphics/zgv/slack-desc b/graphics/zgv/slack-desc
new file mode 100644
index 0000000000000..9ff97178bea3c
--- /dev/null
+++ b/graphics/zgv/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+zgv: zgv (svgalib picture viewer)
+zgv:
+zgv: zgv is a picture viewer with a thumbnail-based file selector.
+zgv: It supports most popular formats and allows panning and fit-to-screen
+zgv: methods of viewing, slideshows, scaling, gamma adjustment, etc.
+zgv:
+zgv: Homepage: http://www.svgalib.org/rus/zgv
+zgv:
+zgv:
+zgv:
+zgv:
diff --git a/graphics/zgv/zgv.SlackBuild b/graphics/zgv/zgv.SlackBuild
new file mode 100644
index 0000000000000..90fe1f06f49a9
--- /dev/null
+++ b/graphics/zgv/zgv.SlackBuild
@@ -0,0 +1,107 @@
+#!/bin/sh
+ 
+# Slackware build script for zgv 
+# Modified by Luis Henrique <lmello.009@gmail.com>
+
+# (C) 2007 Michael Wagner <lapinours@web.de>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=zgv
+VERSION=5.9
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+DOCS="AUTHORS COPYING ChangeLog INSTALL NEWS README* SECURITY TODO"
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG/{etc,usr/{bin,info,man/man1}} $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Apply patches
+for i in $CWD/patches/*; do
+  patch -p0 < $i 
+done
+
+make SLKCFLAGS="$SLKCFLAGS"
+make install DESTDIR=$PKG
+
+for i in $PKG/usr/man/man1/* $PKG/usr/info/*; do
+  gzip -9 $i 2> /dev/null
+done
+
+# Install sample config file
+cat doc/sample.zgvrc > $PKG/etc/zgv.conf.new
+
+# Install udev rules file to allow non-root users who are in the
+# "video" group to use zgv
+mkdir -p $PKG/lib/udev/rules.d
+cat $CWD/90-svga.rules > $PKG/lib/udev/rules.d/90-svga.rules
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+chmod 644 $PKG/usr/doc/$PRGNAM-$VERSION/*
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/graphics/zgv/zgv.info b/graphics/zgv/zgv.info
new file mode 100644
index 0000000000000..4ab13c759ca65
--- /dev/null
+++ b/graphics/zgv/zgv.info
@@ -0,0 +1,10 @@
+PRGNAM="zgv"
+VERSION="5.9"
+HOMEPAGE="http://www.svgalib.org/rus/zgv/"
+DOWNLOAD="http://www.svgalib.org/rus/zgv/zgv-5.9.tar.gz"
+MD5SUM="d65a434ddeb612f0c488177f873afad2"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Luis Henrique"
+EMAIL="lmello.009@gmail.com"
+APPROVED="rworkman"