diff options
| -rw-r--r-- | audio/alsa-tools/README | 67 | ||||
| -rw-r--r-- | audio/alsa-tools/alsa-tools.SlackBuild | 38 | ||||
| -rw-r--r-- | audio/alsa-tools/alsa-tools.info | 12 |
3 files changed, 76 insertions, 41 deletions
diff --git a/audio/alsa-tools/README b/audio/alsa-tools/README index 4d2f15ff7e4e4..a08fa787cdb24 100644 --- a/audio/alsa-tools/README +++ b/audio/alsa-tools/README @@ -11,30 +11,43 @@ with the alsa-tools source). Also included is the SlackBuild author's Included tools: -ac3dec - simple AC3 stream decoder -as10k1 - assembler for the emu10k1 DSP chip present in Creative soundcards -cspctl - Sound Blaster 16 ASP/CSP control program -dl10k1 - loads dumps previously created with lo10k1 & ld10k1 -echomixer - Linux equivalent of the Echoaudio console application -envy24control - Control tool for Envy24 (ice1712) based soundcards -extract_ac3 - extract AC3 streams from VOB files -hdspconf - GUI to control the Hammerfall HDSP Alsa Settings -hdsploader - firmware loader for the RME Hammerfall DSP cards -hdspmixer - Linux equivalent of the Totalmix application from RME -hwmixvolume - hardware mixer control for cards using hardware mixing -init_audigy, init_audigy_eq10, init_live - initialize Creative cards -ld10k1 - dump patches stored in an EMU10K1/EMU10K2 card -ld10k1d - daemon for lo10k1 -lo10k1 - EMU10K1 (EMU10K2) patch loader for ALSA -mixartloader - Firmware loader for Digigram miXart soundcards -pcxhrloader - Firmware loader for Digigram pcxhr compatible soundcards -qlo10k1 - GUI for loading patches on EMU10K1/EMU10K2 cards -rmedigicontrol - control tool for RME Digi32 and RME Digi96 soundcards -sbiload - OPL2/3 FM instrument loader for ALSA hwdep -sscape_ctl - ALSA SoundScape control utility -us428control - Tascam US-428 control surface daemon -usx2yloader - 2nd Phase Firmware loader for Tascam USX2Y USB soundcards -vxloader - Firmware loader for Digigram VX soundcards - -One of the tools (qlo10k1) uses Qt3. If you need this tool, install qt3, -and pass QT3=yes in the environment for alsa-tools.SlackBuild. + as10k1 - assembler for emu10k1 DSP chip present in Creative soundcards + cspctl - Sound Blaster 16 ASP/CSP control program + dl10k1 - loads dumps previously created with lo10k1 & ld10k1 +* echomixer - Linux equivalent of the Echoaudio console application +* envy24control - Control tool for Envy24 (ice1712) based soundcards + hda-verb - send a HD-audio command to an intel-hda hwdep device +* hdajackretask - retask the hardware jacks on intel-hda devices +* hdspconf - GUI to control the Hammerfall HDSP Alsa Settings + hdsploader - firmware loader for the RME Hammerfall DSP cards +* hdspmixer - Linux equivalent of the Totalmix application from RME + hwmixvolume - hardware mixer control for cards using hardware mixing + init_audigy, init_audigy_eq10, init_live - initialize Creative cards + ld10k1 - dump patches stored in an EMU10K1/EMU10K2 card + ld10k1d - daemon for lo10k1 + lo10k1 - EMU10K1 (EMU10K2) patch loader for ALSA + mixartloader - Firmware loader for Digigram miXart soundcards + pcxhrloader - Firmware loader for Digigram pcxhr compatible soundcards +* qlo10k1 - GUI for loading patches on EMU10K1/EMU10K2 cards +* rmedigicontrol - control tool for RME Digi32 and RME Digi96 soundcards + sbiload - OPL2/3 FM instrument loader for ALSA hwdep + sscape_ctl - ALSA SoundScape control utility + us428control - Tascam US-428 control surface daemon + usx2yloader - 2nd Phase Firmware loader for Tascam USX2Y USB soundcards + vxloader - Firmware loader for Digigram VX soundcards + +(Older versions included the tools "ac3dec" and "extract_ac3", which +were removed from 1.0.27, probably for legal reasons) + +Tools marked with an * are GUI tools that require X. To build on an X-less +system, set GUI=no in the environment. + +Optional dependencies: + +qt3 - only used for qlo10k1 tool (used for loading patches into emu10k1 + cards with a hardware MIDI synth). This tool won't be built, if + qt3 is not installed (or QT3=no or GUI=no is set in the environment). + +fltk - only used for the hdspconf and hdspmixer tools (only useful for + Hammerfall HDSP cards). This tool won't be built, if fltk is not + installed (or FLTK=no or GUI=no is set in the environment). diff --git a/audio/alsa-tools/alsa-tools.SlackBuild b/audio/alsa-tools/alsa-tools.SlackBuild index 893f855438882..f3ce60bec4d10 100644 --- a/audio/alsa-tools/alsa-tools.SlackBuild +++ b/audio/alsa-tools/alsa-tools.SlackBuild @@ -4,7 +4,7 @@ # Written by B. Watson (yalhcru@gmail.com) -# Licensed under the WTFPL. See http://sam.zoy.org/wtfpl/ for details. +# Licensed under the WTFPL. See http://www.wtfpl.net/txt/copying/ for details. # I am *not* going to create separate packages for each of the individual # tools, as some distros do. They're small enough that it's worth the @@ -14,7 +14,7 @@ # *** I agree. --rworkman :-) PRGNAM=alsa-tools -VERSION=${VERSION:-1.0.26.1} +VERSION=${VERSION:-1.0.27} BUILD=${BUILD:-2} TAG=${TAG:-_SBo} @@ -48,7 +48,7 @@ fi set -e FIRMWARE=alsa-firmware -FIRMVER=1.0.25 +FIRMVER=1.0.27 rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT @@ -68,24 +68,41 @@ find . \ mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +# allow disabling all the GUI apps +if [ "${GUI:-yes}" != "yes" ]; then + QT3=no + FLTK=no + rm -rf echomixer envy24control hdajackretask rmedigicontrol +fi + # qlo10k1 depends on Qt3, which no longer ships with Slackware. # This supports the SBo qt3 build. It's not enough to source qt.sh, # the qt3 bin directories need to come first in $PATH too. # If you got your Qt3 from some other source, you may have to # fiddle with QTDIR and PATH yourself. -if [ "${QT3:-no}" = "yes" ]; then +if [ -e /opt/kde3/lib$LIBDIRSUFFIX/qt3 -a "${QT3:-yes}" = "yes" ]; then source /etc/profile.d/qt.sh - export PATH=/opt/kde3/lib/qt3/bin:/opt/kde3/bin:$PATH + export PATH=/opt/kde3/lib$LIBDIRSUFFIX/qt3/bin:/opt/kde3/bin:$PATH else rm -rf qlo10k1 fi -# one loop to build them all +# hdspconf and hdspmixer depend on fltk. Don't build them if disabled or +# not installed. +if [ -e /usr/bin/fltk-config -a "${FLTK:-yes}" = "yes" ]; then + : do nothing +else + rm -rf hdspconf hdspmixer +fi + +# one loop to build them all. The -include stddef.h fixes qlo10k1 'ptrdiff_t doesn't +# name a type' errors, and doesn't hurt anything else. for subdir in $( find . -name configure | sed -e 's,^\./,,' -e 's,/configure,,' ); do cd $subdir + LDFLAGS="-L/usr/lib$LIBDIRSUFFIX" \ CFLAGS="$SLKCFLAGS" \ - CXXFLAGS="$SLKCFLAGS" \ + CXXFLAGS="$SLKCFLAGS -include stddef.h" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ @@ -130,7 +147,12 @@ CXXFLAGS="$SLKCFLAGS" \ make make install-strip DESTDIR=$PKG -# remove the hotplug scripts, since Slackware 13.37 doesn't use hotplug. +# Niels Horn pointed out that some of the firmware shipped with this +# package conflicts with Slackware's kernel-firmware package. The files +# are identical, so just leave them out of this build. +( cd $PKG/lib/firmware ; rm -rf ess korg sb16 yamaha ) + +# remove the hotplug scripts, since Slackware 13.37 & up doesn't use hotplug. # Instead, they've been converted to udev rules. rm -rf $PKG/etc/hotplug diff --git a/audio/alsa-tools/alsa-tools.info b/audio/alsa-tools/alsa-tools.info index 66eb28300de3b..d2c5603c85634 100644 --- a/audio/alsa-tools/alsa-tools.info +++ b/audio/alsa-tools/alsa-tools.info @@ -1,12 +1,12 @@ PRGNAM="alsa-tools" -VERSION="1.0.26.1" +VERSION="1.0.27" HOMEPAGE="http://www.alsa-project.org/" -DOWNLOAD="http://alsa.cybermirror.org/tools/alsa-tools-1.0.26.1.tar.bz2 \ - http://alsa.cybermirror.org/firmware/alsa-firmware-1.0.25.tar.bz2" -MD5SUM="805526ea5d6c40e1f2c94cee86141230 \ - f1939da45b162c83a726c54a470ef139" +DOWNLOAD="http://alsa.cybermirror.org/tools/alsa-tools-1.0.27.tar.bz2 \ + http://alsa.cybermirror.org/firmware/alsa-firmware-1.0.27.tar.bz2" +MD5SUM="1ea381d00a6069a98613aa7effa4cb51 \ + b373b350d5151dd7d64db2fc12936b04" DOWNLOAD_x86_64="" MD5SUM_x86_64="" -REQUIRES="fltk" +REQUIRES="" MAINTAINER="B. Watson" EMAIL="yalhcru@gmail.com" |