9 files changed, 528 insertions, 0 deletions
diff --git a/network/openvswitch/README b/network/openvswitch/README
new file mode 100644
index 0000000000000..f8f2d09e4134f
--- /dev/null
+++ b/network/openvswitch/README
@@ -0,0 +1,19 @@
+Open vSwitch is a production quality, multilayer virtual switch licensed
+under the open source Apache 2.0 license.  It is designed to enable
+massive network automation through programmatic extension, while still
+supporting standard management interfaces (e.g. NetFlow, sFlow, RSPAN,
+ERSPAN,  CLI).  In addition, it is designed to support distribution
+across multiple physical servers similar to VMware.s vNetwork distributed
+vswitch or Cisco.s Nexus 1000V.
+
+Open vSwitch can operate both as a soft switch running within the
+hypervisor, and as the control stack for switching silicon. It has been
+ported to multiple virtualization platforms and switching chipsets. It
+is the default switch in the Xen Cloud Platform and also supports Xen,
+XenServer, KVM, and VirtualBox. The bulk of the code is written in
+platform-independent C and is easily ported to other environments.
+
+This package will build kernel modules that will be uses as replacements
+for the bridge modules included with the stock Linux kernel.  Open
+vSwitch includes a kernel module if you wish to use the standard Linux
+bridge utils to manage it.
diff --git a/network/openvswitch/doinst.sh b/network/openvswitch/doinst.sh
new file mode 100644
index 0000000000000..9a89f95fb8789
--- /dev/null
+++ b/network/openvswitch/doinst.sh
@@ -0,0 +1,29 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD|md5sum)" = "$(cat $NEW|md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.openvswitch.new
+
+if [ -x /sbin/depmod ]; then
+  chroot . /sbin/depmod -a >/dev/null 2>&1
+fi
diff --git a/network/openvswitch/openvswitch.SlackBuild b/network/openvswitch/openvswitch.SlackBuild
new file mode 100644
index 0000000000000..df8fac18d3a06
--- /dev/null
+++ b/network/openvswitch/openvswitch.SlackBuild
@@ -0,0 +1,134 @@
+#!/bin/sh
+
+# Slackware build script for openvswitch
+
+# Copyright 2008-2011 Christopher Walker
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=openvswitch
+VERSION=1.2.0
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+MODULEPATH=${MODULEPATH:-/lib/modules/$(uname -r)}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+if [ ! -d $MODULEPATH ]; then
+  echo "Missing module path $MODULEPATH!  Exiting script..."
+  exit
+fi
+
+if [ ! -h $MODULEPATH/build ]; then
+  echo "Missing source patch $MODULEPATH/build!  Exiting script..."
+  exit
+fi
+
+KERNELPATH=$(readlink $MODULEPATH/build)
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --with-l26=$KERNELPATH \
+  --enable-ndebug \
+  --enable-ssl
+
+make
+make DESTDIR=$TMP/package-$PRGNAM install
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/{schema,xen}
+install -m 644 AUTHORS COPYING ChangeLog CodingStyle INSTALL.KVM \
+  INSTALL.Linux INSTALL.RHEL INSTALL.SSL INSTALL.XenServer INSTALL.bridge \
+  INSTALL.userspace NOTICE PORTING README README-gcov REPORTING-BUGS \
+  SubmittingPatches WHY-OVS \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+install -m 644 $CWD/xen/vif-openvswitch $CWD/xen/network-openvswitch \
+  $CWD/xen/README \
+  $PKG/usr/doc/$PRGNAM-$VERSION/xen
+install -m 644 vswitchd/vswitch.ovsschema \
+  $PKG/usr/doc/$PRGNAM-$VERSION/schema
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG$MODULEPATH/kernel/extra/openvswitch
+install -m 644 datapath/linux/openvswitch_mod.ko \
+  $PKG$MODULEPATH/kernel/extra/openvswitch
+install -m 644 datapath/linux/brcompat_mod.ko \
+  $PKG$MODULEPATH/kernel/extra/openvswitch
+
+mkdir -p $PKG/etc/openvswitch
+
+mkdir -p $PKG/etc/rc.d
+sed -e "s/@DOCDIR@/\/usr\/doc\/$PRGNAM-$VERSION/g" $CWD/rc.openvswitch > $PKG/etc/rc.d/rc.openvswitch.new
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+mkdir -p $PKG/var/run/openvswitch
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/openvswitch/openvswitch.info b/network/openvswitch/openvswitch.info
new file mode 100644
index 0000000000000..3cd5eff0e3ddb
--- /dev/null
+++ b/network/openvswitch/openvswitch.info
@@ -0,0 +1,10 @@
+PRGNAM="openvswitch"
+VERSION="1.2.0"
+HOMEPAGE="http://openvswitch.org"
+DOWNLOAD="http://openvswitch.org/releases/openvswitch-1.2.0.tar.gz"
+MD5SUM="f01a8fc15fb9f12d29cad6ecd3d6dfb9"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Christopher Walker"
+EMAIL="kris240376@gmail.com"
+APPROVED="Niels Horn"
diff --git a/network/openvswitch/rc.openvswitch b/network/openvswitch/rc.openvswitch
new file mode 100644
index 0000000000000..5e0f3d561a259
--- /dev/null
+++ b/network/openvswitch/rc.openvswitch
@@ -0,0 +1,68 @@
+#!/bin/sh
+# Start/stop/restart openvswitch.
+
+# To start Open vSwitch automatically at boot, be sure this script is
+# executable:
+#
+#   % chmod 755 /etc/rc.d/rc.openvswitch
+
+# Before you can run Open vSwitch daemon, you must have a database.  To
+# install an initial database, perform the following as root:
+#
+#   % modprobe openvswitch_mod
+#   % ovsdb-tool create /etc/openvswitch/ovs-vswitchd.conf.db @DOCDIR@/schema/vswitch.ovsschema
+#
+
+# Module to make Open vSwitch compatible with Linux bridge utils:
+BRCOMPAT=0
+
+SOCKET=/var/run/openvswitch/db.sock
+VSPID=/var/run/openvswitch/ovs-vswitchd.pid
+DBPID=/var/run/openvswitch/ovsdb-server.pid
+
+# Insert kernel driver for Open vSwitch:
+/sbin/modprobe openvswitch_mod
+
+# Insert kernel driver for VLANs:
+/sbin/modprobe 8021q
+
+# Insert kernel driver for bridge util compatibility:
+if [ $BRCOMPAT -ne 0 ] ; then
+  /sbin/modprobe brcompat_mod
+fi
+
+# Start openvswitch:
+openvswitch_start() {
+  echo "Starting openvswitch:  /etc/rc.d/rc.openvswitch"
+  /usr/sbin/ovsdb-server /etc/openvswitch/ovs-vswitchd.conf.db --remote=punix:$SOCKET --detach --pidfile=$DBPID
+  /usr/bin/ovs-vsctl --no-wait init
+  /usr/sbin/ovs-vswitchd unix:$SOCKET --detach --pidfile=$VSPID
+}
+
+# Stop openvswitch:
+openvswitch_stop() {
+  echo "Stopping openvswitch:  /etc/rc.d/rc.openvswitch"
+  if [ -e $VSPID ]; then
+    pid=$(cat $VSPID)
+    /usr/bin/ovs-appctl -t /var/run/openvswitch/ovs-vswitchd.$pid.ctl exit
+  fi
+  if [ -e $DBPID ]; then
+    pid=$(cat $DBPID)
+    /usr/bin/ovs-appctl -t /var/run/openvswitch/ovsdb-server.$pid.ctl exit
+  fi
+}
+
+case "$1" in
+'start')
+  openvswitch_start
+  ;;
+'stop')
+  openvswitch_stop
+  ;;
+'restart')
+  openvswitch_stop
+  openvswitch_start
+  ;;
+*)
+  echo "usage $0 start|stop|restart"
+esac
diff --git a/network/openvswitch/slack-desc b/network/openvswitch/slack-desc
new file mode 100644
index 0000000000000..d302c084c5d25
--- /dev/null
+++ b/network/openvswitch/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+openvswitch: openvswitch (multilayer virtual switch)
+openvswitch:
+openvswitch: Open vSwitch is a production quality, multilayer virtual switch
+openvswitch: licensed under the open source Apache 2.0 license.  It is designed
+openvswitch: to enable massive network automation through programmatic extension,
+openvswitch: while still supporting standard management interface (e.g. NetFlow,
+openvswitch: sFlow, RSPAN, ERSPAN, CLI).
+openvswitch:
+openvswitch: Homepage: http://openvswitch.org/
+openvswitch:
+openvswitch:
diff --git a/network/openvswitch/xen/README b/network/openvswitch/xen/README
new file mode 100644
index 0000000000000..93889615e7f91
--- /dev/null
+++ b/network/openvswitch/xen/README
@@ -0,0 +1,39 @@
+Here are some scripts that I've written for use with Xen at my site.
+In order to use these scripts with your Xen installation you'll need to copy
+both the network-openvswitch and vif-openvswitch files to your
+/etc/xen/scripts directory.  You can instruct Xen to use these scripts by
+editing your /etc/xen/xend-config.sxp file and specifying these scripts as
+the default network-script and vif-script.
+
+For example, here are the entries in my xend-config.sxp file:
+
+  (network-script 'network-openvswitch netdev=eth2 bridge=ovs0')
+
+  (vif-script 'vif-openvswitch bridge=ovs0')
+
+If your network interface card and attached network switch support VLAN
+tagged traffic, you can place virtual machines within a seperate VLAN by
+appending a '.' and the VLAN tag number you wish the domain to use.  For
+example, to have all domains default to VLAN 2 you can do the following:
+
+  (vif-script 'vif-openvswitch bridge=ovs0.2')
+
+You can also specify tagged traffic in the domain configuration file.
+
+If you are hosting a hardware virtualized domain understand that the
+/etc/xen/scripts/qemu-ifup script is run instead of the vif-script specified
+in the xend-config.sxp file.  You'll need to edit this file to add the port
+to the vswitch instead of using the brctl (unless of course you are using
+the appropriate kernel module to control the vswitch using brctl.)  Here is
+a snippet from my qemu-ifup to handle hardware virtualized ports:
+
+  if lsmod | grep -c openvswitch_mod 1> /dev/null && ! lsmod | grep -c brcompat_mod 1> /dev/null
+  then
+      ovs-vsctl -- --may-exist add-port $bridge $1
+  else
+      brctl addif $bridge $1 || true
+  fi
+
+This doesn't handle tagged traffic.  I'll leave that as an exercise for you.
+
+Enjoy.
diff --git a/network/openvswitch/xen/network-openvswitch b/network/openvswitch/xen/network-openvswitch
new file mode 100644
index 0000000000000..45cda0b1954ee
--- /dev/null
+++ b/network/openvswitch/xen/network-openvswitch
@@ -0,0 +1,124 @@
+#!/bin/bash
+#============================================================================
+# Default Xen network start/stop script.
+# Xend calls a network script when it starts.
+# The script name to use is defined in ${XEN_CONFIG_DIR}/xend-config.sxp
+# in the network-script field.
+#
+# This script creates a virtual switch (default ${netdev}) and adds a
+# device (defaults to eth0) to it.  The interface that this Open vSwitch
+# is created on should not have a working IP address and will be used as
+# a switch for Xen domU's.
+#
+# Usage:
+# network-openvswitch (start|stop|status) {VAR=VAL}*
+#
+# Vars:
+# bridge     The bridge to use (default xenvs0).
+# netdev     The interface to add to the bridge (default eth0).  This
+#            device should not be configured with an IP address.  If so
+#            this script will tear down the interface and bring it back up
+#            without an IP address.
+#
+# start:
+# Creates the bridge as bridge
+# Enslaves netdev to bridge
+#
+# stop:
+# Removes netdev from the bridge
+# Deletes bridge
+#
+# status:
+# Print addresses, interfaces
+#
+#============================================================================
+
+dir=$(dirname "$0")
+. "$dir/logging.sh"
+. "$dir/xen-script-common.sh"
+. "$dir/xen-network-common.sh"
+. "$dir/locking.sh"
+
+findCommand "$@"
+evalVariables "$@"
+
+netdev=${netdev:-eth0}
+bridge=${bridge:-ovs0}
+
+addr=`ip addr show dev ${netdev} | egrep '^ *inet' | sed -e 's/ *inet //' -e 's/ .*//'`
+if [ -n "$addr" ]; then
+    echo "Invalid device: ${netdev} is up and has a valid IP address!" >&2
+    exit 1
+fi
+
+show_status () {
+    local dev=$1
+    local bridge=$2
+    
+    echo '============================================================'
+    echo 'vSwitch interfaces'
+    ovs-vsctl list-ifaces ${bridge}
+    echo ' '
+    echo 'vSwitch ports'
+    ovs-vsctl list-ports ${bridge}
+    echo '============================================================'
+}
+
+op_start () {
+    if [ "${bridge}" = "null" ] ; then
+	return
+    fi
+
+    ifconfig "${netdev}" down
+    ifconfig "${netdev}" 0.0.0.0 up
+    ovs-vsctl -- --may-exist add-br ${bridge}
+    ifconfig "${bridge}" 0.0.0.0 up
+    ovs-vsctl -- --may-exist add-port ${bridge} ${netdev}
+
+    # Remove any stale ports from last time virtual switch was running.
+    # Open vSwitch has the habit of remembering port settings between
+    # runs.
+    for port in $(ovs-vsctl list-ports ${bridge})
+    do
+	if [ "${port}" != "${netdev}" ]
+	then
+	    ifconfig "${port}" down
+	    ovs-vsctl del-port ${port}
+	fi
+    done
+}
+
+op_stop () {
+    if [ "${bridge}" = "null" ]; then
+	return
+    fi
+
+    # Remove all ports from virtual switch.
+    for port in $(ovs-vsctl list-ports ${bridge})
+    do
+	ifconfig "${port}" down
+	ovs-vsctl del-port ${port}
+    done
+
+    ifconfig "${bridge}" down
+    ovs-vsctl -- --if-exists del-br ${bridge}
+}
+
+case "$command" in
+    start)
+	op_start
+	;;
+    
+    stop)
+	op_stop
+	;;
+
+    status)
+	show_status ${netdev} ${bridge}
+	;;
+
+    *)
+	echo "Unknown command: $command" >&2
+	echo 'Valid commands are: start, stop, status' >&2
+	exit 1
+esac
diff --git a/network/openvswitch/xen/vif-openvswitch b/network/openvswitch/xen/vif-openvswitch
new file mode 100644
index 0000000000000..bdcd7c46f7228
--- /dev/null
+++ b/network/openvswitch/xen/vif-openvswitch
@@ -0,0 +1,86 @@
+#!/bin/bash
+#============================================================================
+# ${XEN_SCRIPT_DIR}/vif-openvswitch
+#
+# Script for configuring a vif using Open vSwitch.
+#
+# Usage:
+# vif-openvswitch (add|remove|online|offline)
+#
+# Environment vars:
+# vif         vif interface name (required).
+# XENBUS_PATH path to this device's details in the XenStore (required).
+#
+# Read from the store:
+# bridge  bridge to add the vif to (optional).  Defaults to searching for the
+#         bridge itself.
+#
+# up:
+# Enslaves the vif interface to the bridge.
+#
+# down:
+# Removes the vif interface from the bridge.
+#============================================================================
+
+dir=$(dirname "$0")
+. "$dir/vif-common.sh"
+
+bridge=${bridge:-}
+bridge=$(xenstore_read_default "$XENBUS_PATH/bridge" "$bridge")
+
+if [ -z "${bridge}" ]
+then
+    bridge=$(ovs-vsctl listbr | cut -d "
+" -f 1)
+
+    if [ -z "${bridge}" ]
+    then
+	fatal "Could not find bridge and none was specified"
+    fi
+fi
+
+tag=${tag:-}
+
+# Domain on VLAN tagged bridge?
+RET=0
+ovs-vsctl list-br | grep -c ${bridge} 1>/dev/null 2>&1 || RET=1
+if [ $RET -eq 1 ]
+then
+    if [[ $bridge =~ \.[[:digit:]]{1,4}$ ]]
+    then
+	tag=$(echo ${bridge} | cut -d "." -f 2)
+	bridge=$(echo ${bridge} | cut -d "." -f 1)
+    else
+	fatal "Could not find bridge device ${bridge}"
+    fi
+fi
+
+RET=0
+ovs-vsctl list-br | grep -c ${bridge} 1>/dev/null 2>&1 || RET=1
+if [ $RET -eq 1 ]
+then
+    fatal "Could not find bridge device ${bridge}"
+fi
+
+log debug "Successful vif-bridge $command for ${vif}, bridge ${bridge}."
+case "$command" in
+    online)
+	ifconfig "${vif}" 0.0.0.0 up
+	if [ -z $tag ]
+	then
+            ovs-vsctl -- --may-exist add-port ${bridge} ${vif}
+	else
+	    ovs-vsctl -- --may-exist add-port ${bridge} ${vif} tag=${tag}
+	fi
+        ;;
+
+    offline)
+	ovs-vsctl -- --if-exists del-port ${bridge} ${vif}
+	ifconfig "$vif" 0.0.0.0 down
+        ;;
+esac
+
+if [ "$command" == "online" ]
+then
+  success
+fi