diff options
| -rw-r--r-- | games/sauerbraten/sauerbraten.SlackBuild | 38 | ||||
| -rw-r--r-- | games/sauerbraten/sauerbraten.info | 6 | ||||
| -rw-r--r-- | system/rmw/README | 13 | ||||
| -rw-r--r-- | system/rmw/README.Slackware | 390 | ||||
| -rw-r--r-- | system/rmw/rmw.SlackBuild | 35 | ||||
| -rw-r--r-- | system/rmw/rmw.info | 8 | ||||
| -rw-r--r-- | system/rmw/slack-desc | 10 |
7 files changed, 190 insertions, 310 deletions
diff --git a/games/sauerbraten/sauerbraten.SlackBuild b/games/sauerbraten/sauerbraten.SlackBuild index cc40fff214a2b..61e6b4cc4345f 100644 --- a/games/sauerbraten/sauerbraten.SlackBuild +++ b/games/sauerbraten/sauerbraten.SlackBuild @@ -1,25 +1,45 @@ -#!/bin/bash +#!/bin/sh # Slackware build script for sauerbraten # Written by Larry Hajali <larryhaja[at]gmail[dot]com> # New SBo maintainer: Edward Koenig <kingbeowulf[at]linuxgalaxy[dot]org> # +# Copyright 2021 Edward W. Koenig, Vancouver, WA, USA +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + # Changelog #--------------------------------------------------------------------------------------- -# 1.0 26-DEC-2011 New SBo maintainer: Edward Koenig <kingbeowulf[at]gmail[dot]com> -# 2.0 23-JUN-2013 new version, script clean up. -# +# 1.0 26-DEC-2011 New SBo maintainer: Edward Koenig <kingbeowulf[at]gmail[dot]com> +# 2.0 23-JUN-2013 new version, script clean up. +# 3.0 18-APR-2021 new version, added copyright notice cd $(dirname $0) ; CWD=$(pwd) PRGNAM=sauerbraten -VERSION=${VERSION:-2013_02_03} +VERSION=${VERSION:-2020_12_27} BUILD=${BUILD:-1} TAG=${TAG:-_SBo} -EDITION=${EDITION:-collect_edition} - if [ -z "$ARCH" ]; then case "$( uname -m )" in i?86) ARCH=i486 ;; @@ -28,6 +48,7 @@ if [ -z "$ARCH" ]; then esac fi +CWD=$(pwd) TMP=${TMP:-/tmp/SBo} PKG=$TMP/package-$PRGNAM OUTPUT=${OUTPUT:-/tmp} @@ -48,7 +69,7 @@ rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP rm -rf $PRGNAM -tar xvf $CWD/${PRGNAM}_${VERSION}_${EDITION}_linux.tar.bz2 +tar xvf $CWD/${PRGNAM}_${VERSION}_linux.tar.bz2 cd $PRGNAM chown -R root:root . find -L . \ @@ -63,7 +84,6 @@ rm -f bin_unix/* sed -i \ -e "s|-O3|$SLKCFLAGS|" \ -e '/\$(STRIP) \.\./d' \ - -e "s|\./configure|CFLAGS=\"$SLKCFLAGS\" \./configure|" \ src/Makefile make -C src diff --git a/games/sauerbraten/sauerbraten.info b/games/sauerbraten/sauerbraten.info index f352f3669ffda..8b5e61047b23b 100644 --- a/games/sauerbraten/sauerbraten.info +++ b/games/sauerbraten/sauerbraten.info @@ -1,8 +1,8 @@ PRGNAM="sauerbraten" -VERSION="2013_02_03" +VERSION="2020_12_27" HOMEPAGE="http://www.sauerbraten.org/" -DOWNLOAD="http://downloads.sourceforge.net/sauerbraten/sauerbraten_2013_02_03_collect_edition_linux.tar.bz2" -MD5SUM="2cfbd619981402898f97b93be08d58ac" +DOWNLOAD="http://downloads.sourceforge.net/sauerbraten/sauerbraten_2020_12_27_linux.tar.bz2" +MD5SUM="7935ee9ac241a255056f595ca203b4ed" DOWNLOAD_x86_64="" MD5SUM_x86_64="" REQUIRES="" diff --git a/system/rmw/README b/system/rmw/README index 9327eef2e95f6..d51625f973709 100644 --- a/system/rmw/README +++ b/system/rmw/README @@ -1,7 +1,6 @@ -rmw (ReMove to Waste) is a safe-remove utility for the command line. It -can move and restore files to and from directories specified in a -configuration file, and can also be integrated with your regular -desktop trash folder (if your desktop environment uses the -FreeDesktop.org Trash specification). One of the unique features of rmw -is the ability to purge items from your waste (or trash) directories -after x number of days. +rmw (ReMove to Waste) is a safe-remove utility for the command line. +Its goal is to conform to the FreeDesktop.org Trash specification and +therefore be compatible with KDE, GNOME, XFCE, and others. Desktop +integration is optional however, and by default, rmw will only use a +unique features is the ability to purge files from your Waste/Trash +directories after x number of days. diff --git a/system/rmw/README.Slackware b/system/rmw/README.Slackware index 7e0afd8f31e84..a93201f522a7d 100644 --- a/system/rmw/README.Slackware +++ b/system/rmw/README.Slackware @@ -1,320 +1,186 @@ -# rmw-0.8.0 +# rmw-0.7.05 + ## Description -rmw (ReMove to Waste) is a safe-remove utility for the command line. It -can move and restore files to and from directories specified in a -configuration file, and can also be integrated with your regular -desktop trash folder (if your desktop environment uses the -FreeDesktop.org Trash specification). One of the unique features of rmw -is the ability to purge items from your waste (or trash) directories -after x number of days. +rmw (ReMove to Waste) is a safe-remove utility for the command line. +Its goal is to conform to [the FreeDesktop.org Trash +specification](https://specifications.freedesktop.org/trash-spec/trashspec-latest.html) +and therefore be compatible with KDE, GNOME, XFCE, and others. Desktop +integration is optional however, and by default, rmw will only use a +waste folder separated from your desktop trash. One of its unique +features is the ability to purge files from your Waste/Trash +directories after x number of days. Web site: <https://remove-to-waste.info/> -[![codeql-badge]][codeql-url] -[![c-cpp-badge]][c-cpp-url] - -[c-cpp-badge]: https://github.com/theimpossibleastronaut/rmw/actions/workflows/c-cpp.yml/badge.svg -[c-cpp-url]: https://github.com/theimpossibleastronaut/rmw/actions/workflows/c-cpp.yml -[codeql-badge]: https://github.com/theimpossibleastronaut/rmw/workflows/CodeQL/badge.svg -[codeql-url]: https://github.com/theimpossibleastronaut/rmw/actions?query=workflow%3ACodeQL - -rmw is for people who sometimes use rm or rmdir at the command line and -would occasionally like an alternative choice. It's not intended or -designed to act as a replacement for rm, as it's more closely related -to how the [FreeDesktop.org trash -system](https://specifications.freedesktop.org/trash-spec/trashspec-latest.html) -functions. - -## Features and Usage -<!-- Don't make changes below this line, but to src/man/rmw.1 instead. --> -<!-- This is generated with 'man --nh --no-justification ./rmw.1 | col -bx > plaintext' --> -``` -OPTIONS - -h, --help - show help for command line options - - -c, --config FILE - use an alternate configuration - - -l, --list - list waste directories - - -g[N_DAYS], --purge[=N_DAYS] - purge expired files; optional argument 'N_DAYS' overrides - 'expire_age' value from the configuration file (Examples: -g90, - --purge=90) - - By default, purging is disabled ('expire_age' is set to '0' in the - configuration file). To enable, set the 'expire_age' value in your - config file to a value greater than '0' - - You can use '-vvg' to see when the remaining files in the waste - directories will expire. - - -o, --orphaned - check for orphaned files (maintenance) - - An orphan is an item in a waste directory that has no - corresponding .trashinfo file, or vice versa. This option is - intended primarily for developers. Orphans may happen while - testing code changes or if rmw is unintentionally released with a - bug. - (see also: <https://remove-to-waste.info/faq.html#dot_trashinfo>) - - -f, --force - allow purging of expired files - - rmw will refuse to purge directories if they contain non-writable - files or subdirectories. rmw will show a message that tells you - "permission denied; directory still contains files". To override, - you can re-run rmw using '-ffg'. - - By default, force is not required to enable the purge feature. If - you would like to require it, add 'force_required' to your config - file. - - -e, --empty - completely empty (purge) all waste directories - - -r, -R, --recursive - option used for compatibility with rm (recursive operation is - enabled by default) - - -v, --verbose - increase output messages - - -w, --warranty - display warranty - - -V, --version - display version and license information - - RESTORING - -z, --restore FILE(s) - - To restore items, specify the path to them in the <WASTE>/files - directory (wildcards ok). - - When restoring an item, if a file or directory with the same name - already exists at the destination, the item being restored will - have a time/date string (formatted as "_%H%M%S-%y%m%d") appended - to it (e.g. 'foo_164353-210508'). - - -s, --select - select files from list to restore - - Displays a list of items in your waste directories. You can use - the left/right cursor keys to switch between waste directories. - Use the space bar to select the items you wish to restore, then - press enter to restore all selected items. - - -u, --undo-last - undo last move - - Restores files that were last rmw'ed - - -m, --most-recent-list - list most recently rmw'ed files - -ENVIRONMENT - These variables are intended only to be used for testing. See the code- - testing page on the rmw website for more details. - - RMW_FAKE_HOME +## Build Status - RMW_FAKE_YEAR +* [](https://travis-ci.org/theimpossibleastronaut/rmw) +* [](https://semaphoreci.com/andy5995/rmw-3) - RMW_FAKE_MEDIA_ROOT - -FILES - On some systems, $HOME/.config and $HOME/.local/share may be replaced - with $XDG_CONFIG_HOME and $XDG_DATA_HOME +## Screenshots - $HOME/.config/rmwrc - configuration file + - $HOME/.local/share/rmw/purge-time - text file that stores the time of the last purge +[More Screenshots](https://remove-to-waste.info/screenshots.html) - $HOME/.local/share/rmw/mrl - text file containing a list of items that were last rmw'ed +## Contact / Support -NOTES - rmw will not move items from one file system to another. If you try to - rmw a file but don't have a waste directory configured that matches the - file system on which it resides, rmw will refuse to do anything with it. +* [Bug Reports and Feature Requests](https://github.com/theimpossibleastronaut/rmw/blob/master/CONTRIBUTING.md#bug-reports-and-feature-requests) +* [General Help, Support, Discussion](https://remove-to-waste.info/#support) - DESKTOP INTEGRATION - Items will be moved to a waste basket in the same manner as when using - the "move to trash" option from your desktop GUI. They will be separated - from your desktop trash by default; or if you wish for them to share the - same "trash" directory, uncomment the line (in your config file): +## Required libraries - (Note that this does not apply to MacOS; while rmw is yet unable to - integrate with the desktop trash directory, you'll still be able to use - the default Waste directory.) +* libncursesw (ncurses-devel on some systems, such as CentOS) +* gettext (or use --disable-nls if you only need English language support) - WASTE = $HOME/.local/share/Trash +If you are building from source, you will need the libncursesw(5 or +6)-dev package from your operating system distribution. On some systems +just the ncurses packages is needed, and it's often already installed. - then comment out the line +## Compiling - WASTE = $HOME/.local/share/Waste +### As a normal user: - You can reverse which directories are enabled at any time if you ever - change your mind. If both directories are on the same filesystem, rmw - will use the directory listed first in your config file. +Use `../configure --help` to view available compile-time options. - It can be beneficial to have them both uncommented. If your desktop trash - directory (~/.local/share/Trash) is listed after the rmw default - (~/.local/share/Waste) and uncommented, rmw will place newly rmw'ed items - into the default, and it will purge expired files from both. + mkdir build + cd build + ../configure + make - When rmw'ing an item, if a file or directory with the same name already - exists in the waste (or trash) directory, it will not be overwritten; - instead, the current file being rmw'ed will have a time/date string - (formatted as "_%H%M%S-%y%m%d") appended to it (e.g. - 'foo_164353-210508'). +### Installing without superuser privileges - REMOVABLE MEDIA - The first time rmw is run, it will create a configuration file. Waste - directories will be created automatically (Except for when the - ',removable' option is used; see below) e.g., if - '$HOME/.local/share/Waste' is uncommented in the config file, these two - directories will be created: +If you would like to install rmw without superuser privileges, use a prefix +that you have write access to. Example: - $HOME/.local/share/Waste/files - $HOME/.local/share/Waste/info + ../configure --prefix=$HOME/usr + make + make install - If a WASTE directory is on removable media, you may append ',removable'. - In that case, rmw will not try to create it; it must be initially created - manually. When rmw runs, it will check to see if the directory exists - (which means the removable media containing the directory is currently - mounted). If rmw can't find the directory, it is assumed the media - containing the directory isn't mounted and that directory will not be - used for the current run of rmw. +The rmw binary will be installed to `$HOME/usr/bin` and documentation to +`$HOME/usr/doc`. - With the media mounted, once you manually create the waste directory for - that device (e.g. "/mnt/flash/.Trash-$UID") and run rmw, it will - automatically create the two required child directories "files" and - "info". +### If configure fails -EXAMPLES - RESTORING - rmw -z ~/.local/share/Waste/files/foo - rmw -z ~/.local/share/Waste/files/bars* +On **OSX**, ncursesw isn't provided by default but can be installed +using `brew install ncurses`. Then precede `./configure` with +`PKG_CONFIG_PATH="/usr/local/opt/ncurses/lib/pkgconfig"` Example: - CONFIGURATION - WASTE=/mnt/flash/.Trash-$UID, removable - When using the removable attribute, you must also manually create - the directory + PKG_CONFIG_PATH="/usr/local/opt/ncurses/lib/pkgconfig" ../configure - expire_age = 45 - rmw will permanently delete files that have been in the waste (or - trash) for more than 45 days. +If you can't use [brew](https://brew.sh/), or install libncursesw or +libmenuw some other way, rmw will use `ncurses` but you may experience +[this minor +bug](https://github.com/theimpossibleastronaut/rmw/issues/205). -AUTHORS - Project Manager: Andy Alt - The RMW team: see AUTHORS.md +Note: rmw was built on **Windows** 2 years ago using Cygwin but it +didn't use the proper directories. We have no Windows developers +working on this project and are hoping that some will join soon!. As +stated in the description, the goal of this project is a +"cross-platform" utility; so getting rmw to work on Windows is +still on the TODO list. -REPORTING BUGS - Report bugs to <https://github.com/theimpossibleastronaut/rmw/issues>. +## Uninstall / Cleaning up -COPYRIGHT - Copyright © 2012-2021 Andy Alt +* make uninstall (uninstalls the program if installed with 'make install`) +* make distclean (removes files in the build directory created by +`configure` and 'make') - License GPLv3+: GNU GPL version 3 or later - <https://gnu.org/licenses/gpl.html>. - This is free software: you are free to change and redistribute it. There - is NO WARRANTY, to the extent permitted by law. +## Usage ``` +== First-time use == -## Screenshots +After rmw is installed, running `rmw` will create a configuration file +(rmwrc) in $HOME/.config (or $XDG_CONFIG_HOME). Edit the file as +desired. -See the [Screenshots](https://remove-to-waste.info/screenshots.html) -page on the website. +== Configuration File == -## Contact / Support +Documentation explaining the configuration can be found in your config +file. -* [Bug Reports and Feature Requests](https://github.com/theimpossibleastronaut/rmw/blob/master/CONTRIBUTING.md#bug-reports-and-feature-requests) -* [General Help, Support, Discussion](https://remove-to-waste.info/#support) +Waste folders will be created automatically; e.g. if '$HOME/.local/share/Waste' +is uncommented in the config file, these 3 directories will be created: +$HOME/.local/share/Waste +$HOME/.local/share/Waste/files +$HOME/.local/share/Waste/info -## Installation +If one of the WASTE folders is on removable media, then the user has the +option of appending ',removable'. -[](https://repology.org/project/rmw/versions) +If a folder has ',removable' appended to it, rmw will not try to create +it; it must be initially created manually. If the folder exists when +rmw is run, it will be used; if not, it will be skipped. Once you +create "example_waste", rmw will automatically create +example_waste/info and example_waste/files -rmw is available in the [homebrew and -linuxbrew](https://github.com/Homebrew/) repositories; or there may may -be a binary package available for your OS. You can view a list at -[Repology](https://repology.org/project/rmw/versions) to see in which -repositories rmw is included. Since v0.7.09, x86_64 AppImages are -available. + e.g.: WASTE=/mnt/sda10000/example_waste, removable -AppImages and maintainer-created amd64 Debian packages are available in -the [releases section][releases-url]. +== Features and Options == -[releases-url]: https://github.com/theimpossibleastronaut/rmw/releases] +Usage: rmw [OPTION]... FILE... +ReMove the FILE(s) to a WASTE directory listed in configuration file -## Installing from source + or: rmw -s + or: rmw -u + or: rmw -z FILE... +Restore FILE(s) from a WASTE directory -### Required libraries +-h, --help +-c, --config filename use an alternate configuration +-l, --list list waste directories +-g, --purge run purge even if it's been run today +-o, --orphaned check for orphaned files (maintenance) +-f, --force allow purge to run +-e, --empty completely empty (purge) all waste folders +-r, -R, --recursive option used for compatibility with rm + (recursive operation is enabled by default) +-v, --verbose increase output messages +-w, --warranty display warranty +-V, --version display version and license information -* libncursesw (ncurses-devel on some systems, such as CentOS) -* gettext (or use '-Dnls=false' if you only need English language support) -If you're building from source, you will need the libncursesw(5 or -6)-dev package from your operating system distribution. On some systems -just the ncurses packages is needed, and it's often already installed. - -### Compiling - -#### As a normal user: - -(This examples places the generated files to a separate folder, but you can -run 'configure' from any directory you like.) - -``` - meson builddir - cd builddir - ninja -``` - -Use `meson configure` in the build dir to view available options. + ===] Restoring [=== -#### Installing without superuser privileges +-z, --restore <wildcard filename(s) pattern> (e.g. ~/.local/share/Waste/files/foo*) +-s, --select select files from list to restore +-u, --undo-last undo last ReMove -If you would like to install rmw without superuser privileges, use a prefix -that you have write access to. Example: +== Purging == - meson -Dprefix=$HOME/.local builddir +If purging is 'on', rmw will permanently delete files from the folders +specified in the configuration file after 'x' number of days. Purging can be +disabled by using 'purge_after = 0' in configuration file. rmw will only check +once per day if it's time to purge (use -g to check more often). -or while in the build dir +The time of the last automatic purge check is stored in `purge-time`, +located in $HOME/.local/share/rmw (or $XDG_DATA_HOME/rmw). - meson configure -Dprefix=$HOME/.local +== -e, --empty == -To install: +Completely empty (purge) all waste folders - ninja install +== -u, --undo == -In the example above, the rmw binary will be installed to -`$HOME/.local/bin` and documentation to `$HOME/.local/doc`. +Restores files that were last rmw'ed. No arguments for `-u` are +necessary. The list of files that were last rmw'ed is stored in `mrl`, located in +$HOME/.local/share/rmw (or $XDG_DATA_HOME/rmw). -### If ncurses can't be found +== -z, --restore == -On **macOS**, you may get a message during 'configure' that the menu -library can't be found. The ncurses menu library isn't provided by -default but can be installed using `brew install ncurses`. Then run -'configure' like this: +To restore a file, or multiple files, specify the path to them in the +<WASTE>/files folder (wildcards ok). +e.g. 'rmw -z ~/.local/share/Waste/files/foo*' - export PKG_CONFIG_PATH="$PKG_CONFIG_PATH:/usr/local/opt/ncurses/lib/pkgconfig +== -f, --force == -Or you can install [rmw using -brew](https://formulae.brew.sh/formula/rmw). +A change from previous versions, purge is allowed to run without the '-f' +option. If you'd rather require the use of '-f', you can add the line +'force_required' in your configuration file. -### Uninstall +rmw will refuse to purge directories if they contain non-writable +subdirectories. You can use -f 2 times if you ever see a message that tells +you "permission denied; directory still contains files" (e.g. rwm -gff). - ninja uninstall (uninstalls the program if installed with 'ninja install`) - -Note that the uninstall does not remove any language files that were installed. To remove them: - - sh uninstall_langs.sh +``` diff --git a/system/rmw/rmw.SlackBuild b/system/rmw/rmw.SlackBuild index 8b744a35e24df..bee1c166a75a0 100644 --- a/system/rmw/rmw.SlackBuild +++ b/system/rmw/rmw.SlackBuild @@ -2,7 +2,7 @@ # # Slackware build script for rmw # -# Copyright 2021 / Andy Alt / Minnesota, USA +# Copyright 2019-2021 / Andy Alt / United States # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,13 +21,11 @@ # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# cd $(dirname $0) ; CWD=$(pwd) PRGNAM=rmw -VERSION=${VERSION:-0.8.0_2} -SRCNAM=$(echo $VERSION | tr _ -) +VERSION=${VERSION:-0.7.06} BUILD=${BUILD:-1} TAG=${TAG:-_SBo} @@ -62,9 +60,9 @@ set -e rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP -rm -rf $SRCNAM-$VERSION -tar xvf $CWD/$PRGNAM-$SRCNAM.tar.gz -cd $PRGNAM-$SRCNAM +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.gz +cd $PRGNAM-$VERSION chown -R root:root . find -L . \ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ @@ -72,26 +70,23 @@ find -L . \ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; -mkdir build -cd build CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ -meson .. \ - --buildtype=release \ - -Dstrip=true \ +./configure \ --prefix=/usr \ --mandir=/usr/man \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ - --localedir=/usr/share/locale + --localedir=/usr/share/locale \ + --docdir=/usr/doc/$PRGNAM-$VERSION \ + --build=$ARCH-slackware-linux -ninja -DESTDIR=$PKG ninja install -cd .. +make +make install-strip DESTDIR=$PKG -# meson configures stripping the binary when installing above # -#find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ -# | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true +# rmw no longer searches for a system-wide config file +# +#mkdir -p $PKG/etc +#cat rmwrc > $PKG/etc/rmwrc.new find $PKG/usr/man -type f -exec gzip -9 {} \; for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done diff --git a/system/rmw/rmw.info b/system/rmw/rmw.info index 0c123a78c4a0a..778de6ab12367 100644 --- a/system/rmw/rmw.info +++ b/system/rmw/rmw.info @@ -1,10 +1,10 @@ PRGNAM="rmw" -VERSION="0.8.0_2" +VERSION="0.7.06" HOMEPAGE="https://remove-to-waste.info/" -DOWNLOAD="https://github.com/theimpossibleastronaut/rmw/releases/download/v0.8.0/rmw-0.8.0-2.tar.gz" -MD5SUM="96fb309442916eb040593f9ebf571bad" +DOWNLOAD="https://github.com/theimpossibleastronaut/rmw/releases/download/v0.7.06/rmw-0.7.06.tar.gz" +MD5SUM="9b5e0fcda2e32b1886efd50030e51a5e" DOWNLOAD_x86_64="" MD5SUM_x86_64="" -REQUIRES="meson" +REQUIRES="" MAINTAINER="Andy Alt" EMAIL="andy400-dev@yahoo.com" diff --git a/system/rmw/slack-desc b/system/rmw/slack-desc index 855e1f8b375fa..ad3af3da9dd55 100644 --- a/system/rmw/slack-desc +++ b/system/rmw/slack-desc @@ -9,11 +9,11 @@ rmw: rmw (command line trash can/recycle bin) rmw: rmw: rmw (ReMove to Waste) is a safe-remove utility for the command line. -rmw: It can move and restore files to and from directories specified in a -rmw: configuration file, and can also be integrated with your regular -rmw: desktop trash folder (if your desktop environment uses the -rmw: FreeDesktop.org Trash specification). One of the unique features of -rmw: rmw is the ability to purge items from your waste (or trash) +rmw: Its goal is to conform to the FreeDesktop.org Trash specification and +rmw: therefore be compatible with KDE, GNOME, XFCE, and others. Desktop +rmw: integration is optional however, and by default, rmw will only use a +rmw: waste folder separated from your desktop trash. One of its unique +rmw: features is the ability to purge files from your Waste/Trash rmw: directories after x number of days. rmw: rmw: Homepage: https://remove-to-waste.info/ |