diff options
-rw-r--r-- | system/lvm2-lockd/README | 21 | ||||
-rw-r--r-- | system/lvm2-lockd/README.SLACKWARE | 31 | ||||
-rw-r--r-- | system/lvm2-lockd/doinst.sh | 26 | ||||
-rw-r--r-- | system/lvm2-lockd/lvm2-lockd.SlackBuild | 141 | ||||
-rw-r--r-- | system/lvm2-lockd/lvm2-lockd.info | 10 | ||||
-rw-r--r-- | system/lvm2-lockd/slack-desc | 19 |
6 files changed, 248 insertions, 0 deletions
diff --git a/system/lvm2-lockd/README b/system/lvm2-lockd/README new file mode 100644 index 0000000000000..6b49d6c7a893e --- /dev/null +++ b/system/lvm2-lockd/README @@ -0,0 +1,21 @@ +Logical Volume Management (LVM) commands use lvmlockd to coordinate access +to shared storage. + +NOTE: lvm2 package that comes with Slackware includes lvmlockd +support. However, since neither sanlock or dlm were present at build time, +empty functions were compiled in. In order for lvm commands (such as lvmcreate, +etc) to discover and leverage lvmlockd support, stock lvm binary has to +be replaced: + + CLOBBER_STOCK_BINARY=yes ./lvm2-lockd.SlackBuild + +The original binary can be restored by reinstalling the stock lvm2 package. + +By default, lock type is set to sanlock, dlm can be selected with: + + LOCK_TYPE=dlm ./lvm2-lockd.SlackBuild + +This will change package dependancy from sanlock to dlm (also found here +on SlackBuilds.org). + +More information post-install can be found in README.SLACKWARE diff --git a/system/lvm2-lockd/README.SLACKWARE b/system/lvm2-lockd/README.SLACKWARE new file mode 100644 index 0000000000000..5cd06a425c44f --- /dev/null +++ b/system/lvm2-lockd/README.SLACKWARE @@ -0,0 +1,31 @@ +Starting the daemon on boot +--------------------------- + +You may wish to add these lines to /etc/rc.d/rc.local to start the service: + + if [ -x /etc/rc.d/rc.lvmetad ]; then + /etc/rc.d/rc.lvmetad start + fi + + if [ -x /etc/rc.d/rc.lvmlockd ]; then + /etc/rc.d/rc.lvmlockd start + fi + +You may also add these lines to /etc/rc.d/rc.local_shutdown: + + if [ -x /etc/rc.d/rc.lvmlockd ]; then + /etc/rc.d/rc.lvmlockd stop + fi + + if [ -x /etc/rc.d/rc.lvmetad ]; then + /etc/rc.d/rc.lvmetad stop + fi + +Remember to give executable permission to /etc/rc.d/rc.local_shutdown: + + chmod 0755 /etc/rc.d/rc.local_shutdown + +Running the LVM locking system +------------------------------ + +Make sure to read USAGE section in lvmlockd man pages ;-) diff --git a/system/lvm2-lockd/doinst.sh b/system/lvm2-lockd/doinst.sh new file mode 100644 index 0000000000000..2133933ddefb0 --- /dev/null +++ b/system/lvm2-lockd/doinst.sh @@ -0,0 +1,26 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +preserve_perms() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + if [ -e $OLD ]; then + cp -a $OLD ${NEW}.incoming + cat $NEW > ${NEW}.incoming + mv ${NEW}.incoming $NEW + fi + config $NEW +} + +preserve_perms etc/rc.d/rc.lvmetad.new +preserve_perms etc/rc.d/rc.lvmlockd.new diff --git a/system/lvm2-lockd/lvm2-lockd.SlackBuild b/system/lvm2-lockd/lvm2-lockd.SlackBuild new file mode 100644 index 0000000000000..143390df28ac6 --- /dev/null +++ b/system/lvm2-lockd/lvm2-lockd.SlackBuild @@ -0,0 +1,141 @@ +#!/bin/sh + +# Slackware build script for lvm2-lockd + +# Copyright 2019 Mario Preksavec, Zagreb, Croatia +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=lvm2-lockd +VERSION=${VERSION:-2.02.154} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +SRCNAM=LVM2 + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i586 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $SRCNAM.$VERSION +tar xvf $CWD/$SRCNAM.$VERSION.tar.xz +cd $SRCNAM.$VERSION +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ + -o -perm 511 \) -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + +# Copied from lvm2.SlackBuild +CFLAGS="$SLKCFLAGS" \ +./configure \ + --disable-readline \ + --enable-cmdlib \ + --enable-dmeventd \ + --enable-applib \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --with-usrlibdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ + --enable-realtime \ + --with-lvm1=internal \ + --enable-pkgconfig \ + --enable-udev_sync \ + --enable-udev_rules \ + --with-udev-prefix="" \ + --with-device-uid=0 \ + --with-device-gid=6 \ + --with-device-mode=0660 \ + --with-default-locking-dir=/run/lock/lvm \ + --with-default-run-dir=/run/lvm \ + --with-default-dm-run-dir=/run/lvm \ + --with-clvmd-pidfile=/run/lvm/clvmd.pid \ + --with-cmirrord-pidfile=/run/lvm/cmirrord.pid \ + --with-dmeventd-pidfile=/run/lvm/dmeventd.pid \ + --enable-use-lvmlockd \ + --enable-lockd-${LOCK_TYPE:-sanlock} \ + --build=$ARCH-slackware-linux + +make daemons man tools + +# Some assembly required +install -D -m0755 -oroot -groot daemons/lvmlockd/lvmlockd $PKG/usr/sbin/lvmlockd +install -D -m0755 -oroot -groot daemons/lvmlockd/lvmlockctl $PKG/usr/sbin/lvmlockctl +install -D -m0755 -oroot -groot daemons/lvmetad/lvmetad $PKG/usr/sbin/lvmetad +install -D -m0644 -oroot -groot man/lvmlockd.8 $PKG/usr/man/man8/lvmlockd.8 +install -D -m0644 -oroot -groot man/lvmlockctl.8 $PKG/usr/man/man8/lvmlockctl.8 +install -D -m0644 -oroot -groot man/lvmetad.8 $PKG/usr/man/man8/lvmetad.8 + +install -D -m0755 -oroot -groot scripts/lvm2_lvmetad_init_red_hat $PKG/etc/rc.d/rc.lvmetad.new + +# Yes, we are that lazy :^) +install -D -m0755 -oroot -groot scripts/lvm2_lvmetad_init_red_hat $PKG/etc/rc.d/rc.lvmlockd.new +sed -e "s|metadata|locking|g" \ + -e "s|lvmetad|lvmlockd|g" \ + -i $PKG/etc/rc.d/rc.lvmlockd.new + +if [ "${CLOBBER_STOCK_BINARY:-no}" = "yes" ]; then + install -D -m0755 -oroot -groot tools/lvm $PKG/sbin/lvm +fi + +find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +find $PKG/usr/man -type f -exec gzip -9 {} \; +for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a README $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild +cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +cat $CWD/doinst.sh > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/system/lvm2-lockd/lvm2-lockd.info b/system/lvm2-lockd/lvm2-lockd.info new file mode 100644 index 0000000000000..08029f5009153 --- /dev/null +++ b/system/lvm2-lockd/lvm2-lockd.info @@ -0,0 +1,10 @@ +PRGNAM="lvm2-lockd" +VERSION="2.02.154" +HOMEPAGE="https://www.sourceware.org/lvm2/" +DOWNLOAD="http://mirrors.slackware.com/slackware/slackware64-14.2/source/a/lvm2/LVM2.2.02.154.tar.xz" +MD5SUM="c2732c004d9da7d7d0602745490337ca" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +REQUIRES="%README% sanlock" +MAINTAINER="Mario Preksavec" +EMAIL="mario at slackware dot hr" diff --git a/system/lvm2-lockd/slack-desc b/system/lvm2-lockd/slack-desc new file mode 100644 index 0000000000000..adf3aa84390a6 --- /dev/null +++ b/system/lvm2-lockd/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. +# Line up the first '|' above the ':' following the base package name, and +# the '|' on the right side marks the last column you can put a character in. +# You must make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +lvm2-lockd: lvm2-lockd (LVM in a shared storage environment) +lvm2-lockd: +lvm2-lockd: Logical Volume Management (LVM) commands use lvmlockd to coordinate +lvm2-lockd: access to shared storage. +lvm2-lockd: +lvm2-lockd: Homepage: https://www.sourceware.org/lvm2/ +lvm2-lockd: +lvm2-lockd: +lvm2-lockd: +lvm2-lockd: +lvm2-lockd: |