system/munin-node: Added (Statistics gathering client for Munin).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

11 files changed, 453 insertions, 0 deletions

diff --git a/system/munin-node/LICENSE b/system/munin-node/LICENSE
new file mode 100644
index 000000000000..341c30bda445
--- /dev/null
+++ b/system/munin-node/LICENSE
@@ -0,0 +1,166 @@
+                   GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions.
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version.
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.
+
diff --git a/system/munin-node/README b/system/munin-node/README
new file mode 100644
index 000000000000..ac547743ec9e
--- /dev/null
+++ b/system/munin-node/README
@@ -0,0 +1,22 @@
+munin-node is the client portion of the Munin Monitoring system. It allows the 
+Munin master to collect statistics for presentation in RRDTool time-series
+graphs.
+
+munin-node is a Perl application and requires several Perl modules as external
+dependencies:
+
+	Net::Server
+
+Additionally, the following modules are required for some plugins:
+
+	Net::SSLeay (for SSL connections)
+	Net::SNMP
+	Net::CIDR
+
+Munin requires that user munin exists and belongs to group munin. Create these
+before running the SlackBuild script:
+
+groupadd -g 308 munin
+useradd -u 308 -g 308 -s /sbin/nologin munin
+
+Once munin-node is installed, configure plugins per the Munin documentation.
diff --git a/system/munin-node/README.SLACKWARE b/system/munin-node/README.SLACKWARE
new file mode 100644
index 000000000000..a5dccb6b34a4
--- /dev/null
+++ b/system/munin-node/README.SLACKWARE
@@ -0,0 +1,13 @@
+README.SLACKWARE for munin-node
+
+To start munin-node at boot, add the following to /etc/rc.d/rc.local:
+
+  if [ -x /etc/rc.d/rc.munin-node ];  then
+    /etc/rc.d/rc.munin-node start
+  fi
+
+This goes in /etc/rc.d/rc.local_shutdown:
+
+  if [ -x /etc/rc.d/rc.munin-node ];  then
+    /etc/rc.d/rc.munin-node stop
+  fi
diff --git a/system/munin-node/doinst.sh b/system/munin-node/doinst.sh
new file mode 100644
index 000000000000..6afcc2415d09
--- /dev/null
+++ b/system/munin-node/doinst.sh
@@ -0,0 +1,30 @@
+# Post-install configuration scripts, borrowed from the fail2ban
+# Slackbuild: 
+
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.munin-node.new
+config etc/munin/munin-node.conf.new
+config etc/logrotate.d/munin-node.new
diff --git a/system/munin-node/munin-node.SlackBuild b/system/munin-node/munin-node.SlackBuild
new file mode 100644
index 000000000000..487b4c9ea65c
--- /dev/null
+++ b/system/munin-node/munin-node.SlackBuild
@@ -0,0 +1,72 @@
+#!/bin/sh -e
+
+# Slackware Package Build Script for munin-node (http://munin-monitoring.org)
+# SlackBuild source at https://github.com/chapmajs/munin-node-slackbuild
+
+# See LICENSE included in the project root for licensing information.
+
+# Copyright (c) 2015 Jonathan Chapman
+# glitch@glitchwrks.com
+# All rights reserved.
+
+PRGNAM=munin-node
+VERSION=${VERSION:-2.0.25}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+ARCH="noarch"
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+ARCHIVE_NAME=munin
+
+set -e
+
+# Clean up old builds
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar zxvf $CWD/$ARCHIVE_NAME-$VERSION.tar.gz
+cd $ARCHIVE_NAME-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+# Fix a bug in Perldoc extension detection
+patch Makefile < $CWD/patches/Makefile.patch
+
+# Patch Makefile.config for Slackware-esque install locations
+patch Makefile.config < $CWD/patches/Makefile.config.patch
+
+make LIBDIR=/usr/lib${LIBDIRSUFFIX}
+make install-common-prime install-node-prime \
+	install-plugins-prime LIBDIR=/usr/lib${LIBDIRSUFFIX} DESTDIR=$PKG
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mv $PKG/usr/local/share/ $PKG/usr/
+rm -rf $PKG/usr/local
+
+# move config files to .new
+cd $PKG/etc/munin
+for file in $(find . -type f); do
+	mv $file "$file.new"
+done
+
+install -D -m 0644 $CWD/rc.munin-node $PKG/etc/rc.d/rc.munin-node.new
+install -D -m 0644 $CWD/munin-node.logrotate $PKG/etc/logrotate.d/munin-node.new
+
+# Finish up the package
+mkdir -p $PKG/install
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/munin-node/munin-node.info b/system/munin-node/munin-node.info
new file mode 100644
index 000000000000..e589075e0fdd
--- /dev/null
+++ b/system/munin-node/munin-node.info
@@ -0,0 +1,10 @@
+PRGNAM="munin-node"
+VERSION="2.0.25"
+HOMEPAGE="http://munin-monitoring.org"
+DOWNLOAD="http://downloads.munin-monitoring.org/munin/stable/2.0.25/munin-2.0.25.tar.gz"
+MD5SUM="b418a667ce42665557329a7ac3bd1b93"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="perl-Net-Server Net-SSLeay"
+MAINTAINER="Jonathan Chapman"
+EMAIL="glitch@glitchwrks.com"
diff --git a/system/munin-node/munin-node.logrotate b/system/munin-node/munin-node.logrotate
new file mode 100644
index 000000000000..6a68573f86a6
--- /dev/null
+++ b/system/munin-node/munin-node.logrotate
@@ -0,0 +1,8 @@
+/var/log/munin/munin-node.log {
+    weekly
+    rotate 7
+    missingok
+    compress
+    copytruncate
+    notifempty
+}
diff --git a/system/munin-node/patches/Makefile.config.patch b/system/munin-node/patches/Makefile.config.patch
new file mode 100644
index 000000000000..8617deeebb69
--- /dev/null
+++ b/system/munin-node/patches/Makefile.config.patch
@@ -0,0 +1,72 @@
+--- Makefile.config	2014-11-24 16:46:24.000000000 -0500
++++ Makefile.config.new	2015-07-16 14:12:13.868927186 -0400
+@@ -17,10 +17,10 @@
+ #
+ # the base of the Munin installation.
+ #
+-PREFIX     = $(DESTDIR)/opt/munin
++PREFIX     = $(DESTDIR)/usr
+ 
+ # Where Munin keeps its configurations (server.conf, client.conf, ++)
+-CONFDIR    = $(DESTDIR)/etc/opt/munin
++CONFDIR    = $(DESTDIR)/etc/munin
+ 
+ # Server only - where to put munin-cron
+ BINDIR     = $(PREFIX)/bin
+@@ -35,17 +35,17 @@
+ MANDIR     = $(PREFIX)/man
+ 
+ # Where to put internal binaries and plugin repository
+-LIBDIR     = $(PREFIX)/lib
++LIBDIR     = $(PREFIX)/lib/munin
+ 
+ # Server only - Output directory
+ HTMLDIR    = $(PREFIX)/www/docs
+ CGIDIR     = $(PREFIX)/www/cgi
+ 
+ # Where to put internal data for master (RRD, internal files, ...)
+-DBDIR      = $(DESTDIR)/var/opt/munin
++DBDIR      = $(DESTDIR)/var/munin
+ 
+ # Where to put internal data for node (plugin state, ...)
+-DBDIRNODE  = $(DESTDIR)/var/opt/munin-node
++DBDIRNODE  = $(DESTDIR)/var/db/munin-node
+ 
+ # Client only - Where the spool files are written. Must be writable by
+ # group "munin", and should be preserved between reboots
+@@ -56,7 +56,7 @@
+ PLUGSTATE  = $(DBDIRNODE)/plugin-state
+ 
+ # Where Munin should place its logs.
+-LOGDIR     = $(PREFIX)/log/munin
++LOGDIR     = $(DESTDIR)/var/log/munin
+ 
+ # Location of PID files and other statefiles. On the server, must be
+ # writable by the user "munin".
+@@ -133,26 +133,6 @@
+ CHECKUSER  := $(shell $(GETENT) passwd $(USER) >/dev/null 2>/dev/null || (echo "echo User $(USER) nonexistent. Create the user and retry; exit 2"))
+ CHECKGROUP := $(shell $(GETENT) group $(GROUP) >/dev/null 2>/dev/null || (echo "echo Group $(GROUP) nonexistent. Create the group and retry; exit 2"))
+ 
+-# For OSX, comment out the previous two lines and comment in these
+-#
+-#CHECKUSER  := $(shell nicl . -read /users/$(USER) >/dev/null 2>/dev/null || (echo "echo User $(USER) nonexistent. Create the user and retry; exit 2"))
+-#CHECKGROUP := $(shell nicl . -read /groups/$(GROUP) >/dev/null 2>/dev/null || (echo "echo Group $(GROUP) nonexistent. Create the group and retry; exit 2"))
+-
+-# For OSX 10.5 (Leopard), use the following two lines instead of what's above
+-#
+-#CHECKUSER  := $(shell dscl . -read /Users/$(USER) >/dev/null 2>/dev/null || (echo "echo User $(USER) nonexistent. Create the user and retry; exit 2"))
+-#CHECKGROUP := $(shell dscl . -read /Groups/$(GROUP) >/dev/null 2>/dev/null || (echo "echo Group $(GROUP) nonexistent. Create the group and retry; exit 2"))
+-
+-
+-# For HP-UX, use these instead:
+-#
+-#CHECKUSER  := $(shell pwget -n $(USER) >/dev/null 2>/dev/null || (echo "echo User $(USER) nonexistent. Create the user and retry; exit 2"))
+-#CHECKGROUP := $(shell grget -n $(GROUP) >/dev/null 2>/dev/null || (echo "echo Group $(GROUP) nonexistent. Create the group and retry; exit 2"))
+-
+-# For Cygwin, use these instead:
+-#CHECKUSER  := $(shell id $(USER) >/dev/null 2>/dev/null || (echo "echo User $(USER) nonexistent. Create the user and retry; exit 2"))
+-#CHECKGROUP := $(shell grep ^$(GROUP): /etc/group >/dev/null 2>/dev/null || (echo "echo Group $(GROUP) nonexistent. Create the group and retry; exit 2"))
+-
+ CHOWN      := chown
+ CHMOD      := chmod
+ CHGRP      := chgrp
diff --git a/system/munin-node/patches/Makefile.patch b/system/munin-node/patches/Makefile.patch
new file mode 100644
index 000000000000..345022b94141
--- /dev/null
+++ b/system/munin-node/patches/Makefile.patch
@@ -0,0 +1,19 @@
+--- /home/glitch/builds/munin-node/munin-2.0.25/Makefile	2014-11-24 16:46:24.000000000 -0500
++++ Makefile	2015-07-16 14:32:54.688903959 -0400
+@@ -30,6 +30,7 @@
+ MAN8		 := master/_bin/munin-update master/_bin/munin-limits master/_bin/munin-html master/_bin/munin-graph
+ PODMAN8          := build/master/doc/munin-cron master/doc/munin master/doc/munin-check
+ PODMAN5          := build/master/doc/munin.conf node/doc/munin-node.conf
++MAN3EXT		 := $(shell $(PERL) -e 'use Config; print $$Config{man3ext};')
+ 
+ .PHONY: install install-pre install-master-prime install-node-prime install-node-pre install-common-prime install-doc install-man \
+         build build-common-prime build-common-pre build-doc \
+@@ -284,7 +285,7 @@
+              -e 's|\@\@GOODSH\@\@|$(GOODSH)|g;'                      \
+              -e 's|\@\@BASH\@\@|$(BASH)|g;'                          \
+              -e 's|\@\@HASSETR\@\@|$(HASSETR)|g;'                    \
+-             ./master/blib/libdoc/Munin::Master::HTMLOld.3pm    \
++             ./master/blib/libdoc/Munin::Master::HTMLOld.$(MAN3EXT)  \
+              ./master/blib/lib/Munin/Master/HTMLOld.pm          \
+              ./node/blib/sbin/munin-node-configure              \
+              ./node/blib/sbin/munin-node                        \
diff --git a/system/munin-node/rc.munin-node b/system/munin-node/rc.munin-node
new file mode 100644
index 000000000000..ee0327730c9a
--- /dev/null
+++ b/system/munin-node/rc.munin-node
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+# Startup script for munin-node
+
+function munin_start {
+	/usr/sbin/munin-node
+}
+
+function munin_stop {
+	killall munin-node
+}
+
+if [ "$1" == 'start' ]; then
+	munin_start
+elif [ "$1" == 'stop' ]; then
+	munin_stop
+elif [ "$1" == 'restart' ]; then
+	munin_stop
+	munin_start
+else
+	echo "usage: rc.munin-node start|stop|restart"
+fi
diff --git a/system/munin-node/slack-desc b/system/munin-node/slack-desc
new file mode 100644
index 000000000000..3ab8f04c207a
--- /dev/null
+++ b/system/munin-node/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+          |-----handy-ruler------------------------------------------------------|
+munin-node: munin-node (System statistics gathering client for Munin)
+munin-node:
+munin-node: munin-node is the statistics gatherling client used with Munin. This 
+munin-node: client can be queried by a Munin master which processes the report
+munin-node: data into RRDTool graphs.
+munin-node:  
+munin-node: munin-node is written in Perl and requires several external Perl
+munin-node: modules. See the project documentation for requirements.
+munin-node:
+munin-node: Homepage: http://munin-monitoring.org
+munin-node: