system/fwupdate: Removed (part of fwupd).

No other package has a dependency on this package either.

Signed-off-by: Andrew Clemons <andrew.clemons@gmail.com>

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

5 files changed, 0 insertions, 179 deletions

diff --git a/system/fwupdate/README b/system/fwupdate/README
deleted file mode 100644
index a3515433fb14d..0000000000000
--- a/system/fwupdate/README
+++ /dev/null
@@ -1,16 +0,0 @@
-fwupdate - Tools for using the ESRT and UpdateCapsule() to apply firmware
-updates
-
-The actual binary (fwup*.efi) is not automatically installed to your ESP.
-Copying it from /usr/libexec/fwupdate/ is left to be handled by the package
-admin.
-
-If you do not use the standard directory (/boot/efi/EFI/Slackware), you'll
-also need to adjust /usr/libexec/fwupdate/cleanup to cleanup the correct
-directory.
-
-I have not actually used this efi binary for anything yet. This package
-provides the libs needed by fwupd to update firmware, which is what I am
-using it for.
-
-The efi binary is included however for completeness.
diff --git a/system/fwupdate/doinst.sh b/system/fwupdate/doinst.sh
deleted file mode 100644
index e7c66a8cfc674..0000000000000
--- a/system/fwupdate/doinst.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    rm $NEW
-  fi
-}
-
-config usr/libexec/fwupdate/cleanup.new
diff --git a/system/fwupdate/fwupdate.SlackBuild b/system/fwupdate/fwupdate.SlackBuild
deleted file mode 100644
index 5487906bf4874..0000000000000
--- a/system/fwupdate/fwupdate.SlackBuild
+++ /dev/null
@@ -1,123 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for fwupdate
-
-# Copyright 2017-2018 Andrew Clemons, Wellington New Zealand
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=fwupdate
-VERSION=${VERSION:-12}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i586 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i586" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
-
-chown -R root:root .
-find -L . \
- \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
-  -o -perm 511 \) -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
-  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
-
-sed -i "s|-Og|-Og -Wno-error=address-of-packed-member -Wno-error=pointer-sign|" \
-  {efi,linux}/Makefile
-
-# randomly fails with more than one thread
-make -j1 \
-  EFIDIR=Slackware \
-  libdir=/usr/lib$LIBDIRSUFFIX \
-  mandir=/usr/man \
-  datadir=/var/cache \
-  localedir=/usr/share/locale/
-
-make install \
-  DESTDIR=$PKG \
-  EFIDIR=Slackware \
-  libdir=/usr/lib$LIBDIRSUFFIX \
-  mandir=/usr/man \
-  datadir=/var/cache \
-  localedir=/usr/share/locale/
-
-mv $PKG/usr/libexec/fwupdate/cleanup $PKG/usr/libexec/fwupdate/cleanup.new
-
-rm -rf $PKG/usr/src
-
-if [ "$ARCH" = "x86_64" ]; then
-  rm -rf $PKG/usr/lib
-else
-  rm -rf $PKG/usr/lib/debug
-  rm -rf $PKG/usr/lib/systemd
-fi
-
-mv $PKG/boot/efi/EFI/Slackware/fwup* $PKG/usr/libexec/fwupdate/
-rm -rf $PKG/boot
-
-find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a \
-  COPYING TODO \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/fwupdate/fwupdate.info b/system/fwupdate/fwupdate.info
deleted file mode 100644
index d461b482b4635..0000000000000
--- a/system/fwupdate/fwupdate.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="fwupdate"
-VERSION="12"
-HOMEPAGE="https://github.com/rhboot/fwupdate"
-DOWNLOAD="https://github.com/rhboot/fwupdate/archive/12/fwupdate-12.tar.gz"
-MD5SUM="834e421b6aa3206358907e68fb1223c2"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES="libsmbios"
-MAINTAINER="Andrew Clemons"
-EMAIL="andrew.clemons@gmail.com"
diff --git a/system/fwupdate/slack-desc b/system/fwupdate/slack-desc
deleted file mode 100644
index 444c3879ddc54..0000000000000
--- a/system/fwupdate/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.
-# Line up the first '|' above the ':' following the base package name, and
-# the '|' on the right side marks the last column you can put a character in.
-# You must make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':' except on otherwise blank lines.
-
-        |-----handy-ruler------------------------------------------------------|
-fwupdate: fwupdate (Tools to apply firmware updates)
-fwupdate:
-fwupdate: https://github.com/rhboot/fwupdate
-fwupdate:
-fwupdate:
-fwupdate:
-fwupdate:
-fwupdate:
-fwupdate:
-fwupdate:
-fwupdate: