system/thinkfan: Added (fan control program).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

6 files changed, 241 insertions, 0 deletions

diff --git a/system/thinkfan/README b/system/thinkfan/README
new file mode 100644
index 0000000000000..392321b4fa835
--- /dev/null
+++ b/system/thinkfan/README
@@ -0,0 +1,7 @@
+Thinkfan is a simple, lightweight fan control program. Originally designed
+specifically for IBM/Lenovo Thinkpads, it now supports any kind of system via
+the sysfs hwmon interface (/sys/class/hwmon). It is designed to eat as little
+CPU power as possible.
+
+Before using /etc/rc.d/rc.thinkfan, make sure to create and configure a
+/etc/thinkfan.conf file or the daemon will not start.
diff --git a/system/thinkfan/doinst.sh b/system/thinkfan/doinst.sh
new file mode 100644
index 0000000000000..0d77ed1bdb2fb
--- /dev/null
+++ b/system/thinkfan/doinst.sh
@@ -0,0 +1,25 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.thinkfan.new
diff --git a/system/thinkfan/rc.thinkfan b/system/thinkfan/rc.thinkfan
new file mode 100644
index 0000000000000..fae364cbe51a3
--- /dev/null
+++ b/system/thinkfan/rc.thinkfan
@@ -0,0 +1,76 @@
+#!/bin/sh
+
+NAME=thinkfan
+BIN=/usr/bin/$NAME
+CONFIG=/etc/thinkfan.conf
+ARGS="-q -c $CONFIG"
+PIDFILE=/var/run/$NAME.pid
+
+thinkfan_start() {
+  echo -n "Starting $NAME ... "
+  if [ -e "$PIDFILE" ]; then
+    echo "already running!"
+  else
+    $BIN $ARGS
+    if [ $? -ne 0 ] ; then
+      echo "failed to start!"
+      return 1
+    else
+      echo "done!"
+    fi
+  fi
+}
+
+thinkfan_status() {
+    if [ $(pgrep -f $BIN) ]; then
+			echo "thinkfan is running"
+
+			if [ ! -e $PIDFILE ]; then
+				echo "Warning: Missing pid file $PIDFILE"
+			fi
+
+			exit 0
+		else
+			echo "thinkfan is stopped"
+
+			if [ -e $PIDFILE ]; then
+				echo "Detected stale pid file $PIDFILE"
+			fi
+
+			exit 0
+		fi
+}
+
+thinkfan_stop() {
+  echo -n "Stopping $NAME ... "
+  if [ -e "$PIDFILE" ]; then
+    kill -TERM $(cat $PIDFILE) > /dev/null 2>&1
+    echo "done!"
+    rm -f "$PIDFILE"
+  else
+    echo "not running!"
+  fi
+}
+
+thinkfan_restart() {
+  thinkfan_stop
+  sleep 1
+  thinkfan_start
+}
+
+case "$1" in
+'start')
+  thinkfan_start
+  ;;
+'status')
+  thinkfan_status
+  ;;
+'stop')
+  thinkfan_stop
+  ;;
+'restart')
+  thinkfan_restart
+  ;;
+*)
+  echo "usage $0 start|stop|restart|status"
+esac
diff --git a/system/thinkfan/slack-desc b/system/thinkfan/slack-desc
new file mode 100644
index 0000000000000..a729fba6a40e6
--- /dev/null
+++ b/system/thinkfan/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+        |-----handy-ruler------------------------------------------------------|
+thinkfan: thinkfan (fan control program)
+thinkfan:
+thinkfan: Thinkfan is a simple, lightweight fan control program. Originally 
+thinkfan: designed specifically for IBM/Lenovo Thinkpads, it now supports any 
+thinkfan: kind of system via the sysfs hwmon interface (/sys/class/hwmon). It 
+thinkfan: is designed to eat as little CPU power as possible.
+thinkfan: 
+thinkfan:
+thinkfan: 
+thinkfan: 
+thinkfan:
diff --git a/system/thinkfan/thinkfan.SlackBuild b/system/thinkfan/thinkfan.SlackBuild
new file mode 100644
index 0000000000000..990094cab3caa
--- /dev/null
+++ b/system/thinkfan/thinkfan.SlackBuild
@@ -0,0 +1,104 @@
+#!/bin/sh
+
+# Slackware build script for thinkfan
+
+# Copyright 2014 Benjamin Trigona-Harany <slackbuilds@jaxartes.net>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=thinkfan
+VERSION=${VERSION:-0.9.1}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+mkdir -p build
+cd build
+  cmake \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DCMAKE_BUILD_TYPE=Release \
+    -D USE_ATASMART:BOOL=ON ..
+  make 
+  make install DESTDIR=$PKG
+cd ..
+
+mkdir -p $PKG/etc/rc.d
+cp $CWD/rc.thinkfan $PKG/etc/rc.d/rc.thinkfan.new
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+# docs are installed in the wrong location
+mv $PKG/usr/share/doc/$PRGNAM/* $PKG/usr/doc/$PRGNAM-$VERSION
+rmdir $PKG/usr/share/doc/$PRGNAM
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/thinkfan/thinkfan.info b/system/thinkfan/thinkfan.info
new file mode 100644
index 0000000000000..be09ee27a9049
--- /dev/null
+++ b/system/thinkfan/thinkfan.info
@@ -0,0 +1,10 @@
+PRGNAM="thinkfan"
+VERSION="0.9.1"
+HOMEPAGE="http://thinkfan.sourceforge.net/"
+DOWNLOAD="http://sourceforge.net/projects/thinkfan/files/thinkfan-0.9.1.tar.gz"
+MD5SUM="a981142f2c52ee4b0af69d5abbe03ced"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Benjamin Trigona-Harany"
+EMAIL="slackbuilds@jaxartes.net"