system/snapscreenshot: Added (screenshot program for text consoles).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

8 files changed, 242 insertions, 0 deletions

diff --git a/system/snapscreenshot/NOTES.txt b/system/snapscreenshot/NOTES.txt
new file mode 100644
index 000000000000..3acfd2a9b994
--- /dev/null
+++ b/system/snapscreenshot/NOTES.txt
@@ -0,0 +1,29 @@
+Notes:
+
+snapscreenshot is *fast*, when compared to fbdump and fbcat. However,
+the reason it's so fast is that it doesn't read the graphic content of
+the framebuffer. Instead, the text content of the screen is read (from
+the /dev/vcs* devices) and rendered in the current console font... which
+is the current font of the console you executed snapscreenshot from,
+*not* the font in the console you're taking a snapshot of!
+
+Also, custom fonts just don't work well with snapscreenshot. Depending
+on the font, you may get an error (GIO_FONTX), a segmentation fault,
+or else the resulting screenshot is garbled.
+
+Because /dev/vcs* is used, snapscreenshot does NOT work for taking
+screenshots of software that actually uses the framebuffer for graphics,
+e.g. fbpdf, feh, "mplayer -vo fbdev", "links -g -driver fb". For these,
+use fbcat or fbdump instead.
+
+By default, the text on all the consoles ends up in the output image. To
+take a shot of only one console, use a command like:
+
+# snapscreenshot --firstwin 1 -c1 -x1 > shot.tga
+
+...or use this:
+
+# snapscreenshot.cur > shot.tgz
+
+The snapscreenshot.cur script was written by the SlackBuild author,
+and is not part of snapscreenshot itself.
diff --git a/system/snapscreenshot/README b/system/snapscreenshot/README
new file mode 100644
index 000000000000..efa597e5a066
--- /dev/null
+++ b/system/snapscreenshot/README
@@ -0,0 +1,15 @@
+snapscreenshot (screenshot program for text consoles)
+
+snapscreenshot creates a .tga (Targa) image file from the text contents
+of the Linux framebuffer consoles (by default, all of the consoles,
+tiled in a single image).
+
+This probably doesn't work for non-framebuffer consoles (not tested).
+
+By default, snapscreenshot is installed setuid root and executable by
+users in the 'video' group. Normally on Slackware, users logged in at
+the console are in the 'video' group by default. If you don't like this,
+export SETUID=no in the script's environment. This will require root
+access (e.g. su or sudo) for snapscreenshot to work.
+
+See NOTES.txt for more information.
diff --git a/system/snapscreenshot/errors_to_stderr.diff b/system/snapscreenshot/errors_to_stderr.diff
new file mode 100644
index 000000000000..d769e262bd42
--- /dev/null
+++ b/system/snapscreenshot/errors_to_stderr.diff
@@ -0,0 +1,42 @@
+diff -Naur snapscreenshot-1.0.14.3/argh.c snapscreenshot-1.0.14.3.patched/argh.c
+--- snapscreenshot-1.0.14.3/argh.c	2009-08-31 07:23:26.000000000 -0400
++++ snapscreenshot-1.0.14.3.patched/argh.c	2018-07-04 17:48:36.194652959 -0400
+@@ -13,7 +13,7 @@
+     long tmp = strtol(*s, (char **)s, 10);
+     if(tmp<min || tmp>max)
+     {
+-        printf("%s: parameter (--%s) value out of range `%ld'\n", ProgName, LastParm, tmp);
++        fprintf(stderr, "%s: parameter (--%s) value out of range `%ld'\n", ProgName, LastParm, tmp);
+         exit(EXIT_FAILURE);
+     }
+     return tmp;
+@@ -21,14 +21,14 @@
+ 
+ void SuggestHelp(void)
+ {
+-    printf("\nTry `%s --help' for more information.\n", ProgName);
++    fprintf(stderr, "\nTry `%s --help' for more information.\n", ProgName);
+ }
+ void ArgError(int a, const char *b)
+ {
+     switch(a)
+     {
+         case 0:
+-            printf("%s: illegal option -- %c", ProgName, *b);
++            fprintf(stderr, "%s: illegal option -- %c", ProgName, *b);
+             for(a=0; Options[a].c; a++)
+                 if(*b == Options[a].c)
+                 {
+@@ -37,10 +37,10 @@
+                 }
+             break;
+         case 1:
+-            printf("%s: unrecognized option `--%s'", ProgName, b);
++            fprintf(stderr, "%s: unrecognized option `--%s'", ProgName, b);
+             break;
+         default:
+-            printf("%s: invalid parameter: `%s'\n", ProgName, b);
++            fprintf(stderr, "%s: invalid parameter: `%s'\n", ProgName, b);
+     }
+     SuggestHelp();
+     exit(EXIT_FAILURE);
diff --git a/system/snapscreenshot/manpage.diff b/system/snapscreenshot/manpage.diff
new file mode 100644
index 000000000000..73146a362f3e
--- /dev/null
+++ b/system/snapscreenshot/manpage.diff
@@ -0,0 +1,18 @@
+diff -Naur snapscreenshot-1.0.14.3/snapscreenshot.1 snapscreenshot-1.0.14.3.patched/snapscreenshot.1
+--- snapscreenshot-1.0.14.3/snapscreenshot.1	2009-08-31 07:23:26.000000000 -0400
++++ snapscreenshot-1.0.14.3.patched/snapscreenshot.1	2018-07-04 17:55:43.011642115 -0400
+@@ -14,8 +14,12 @@
+ console(s) and outputs a Targa file.
+ You can use convert(1) to convert the resulting image to various formats.
+ .SH OPTIONS
+-This program follows the usual GNU command line syntax, with long
+-options starting with two dashes (`-').
++This program follows vaguely GNU-like command line syntax, with long
++options starting with two dashes (`\-'). Long options that take an
++argument require a space before the argument (an `=' is not accepted),
++and short options that take an argument do NOT allow a space (use
++\fB\-c1\fR, NOT \fB\-c 1\fR).
++.PP
+ A summary of options is included below.
+ .TP
+ .B \-h, \-\-help
diff --git a/system/snapscreenshot/slack-desc b/system/snapscreenshot/slack-desc
new file mode 100644
index 000000000000..f0c1dafe4653
--- /dev/null
+++ b/system/snapscreenshot/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+              |-----handy-ruler------------------------------------------------------|
+snapscreenshot: snapscreenshot (screenshot program for text consoles)
+snapscreenshot:
+snapscreenshot: snapscreenshot creates a .tga (Targa) image file from the text
+snapscreenshot: contents of the Linux framebuffer console (by default, all of the
+snapscreenshot: consoles, tiled in a single image).
+snapscreenshot:
+snapscreenshot:
+snapscreenshot:
+snapscreenshot:
+snapscreenshot:
+snapscreenshot:
diff --git a/system/snapscreenshot/snapscreenshot.SlackBuild b/system/snapscreenshot/snapscreenshot.SlackBuild
new file mode 100644
index 000000000000..5c6d716405d1
--- /dev/null
+++ b/system/snapscreenshot/snapscreenshot.SlackBuild
@@ -0,0 +1,87 @@
+#!/bin/sh
+
+# Slackware build script for snapscreenshot
+
+# Written by B. Watson (yalhcru@gmail.com)
+
+# Licensed under the WTFPL. See http://www.wtfpl.net/txt/copying/ for details.
+
+PRGNAM=snapscreenshot
+VERSION=${VERSION:-1.0.14.3}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \+
+
+# It's really annoying to have errors sent to stdout, when the main
+# way to use the program is to redirect stdout to a file...
+patch -p1 < $CWD/errors_to_stderr.diff
+
+# It's also annoying that -c1 is accepted, but -c 1 isn't. Likewise
+# --firstwin 1, but not --firstwin=1. Not going to fix the code, but at
+# least the man page can document it.
+patch -p1 < $CWD/manpage.diff
+
+make CFLAGS="$SLKCFLAGS" CXXFLAGS="$SLKCFLAGS"
+mkdir -p $PKG/usr/bin $PKG/usr/man/man1
+install -s -m0755 $PRGNAM $PKG/usr/bin
+gzip -9c < $PRGNAM.1 > $PKG/usr/man/man1/$PRGNAM.1.gz
+
+# Include this script, because pretty much everyone who ever uses this
+# will either write their own version, or wish they knew how...
+install -m0755 -oroot -groot $CWD/$PRGNAM.cur $PKG/usr/bin
+
+if [ "${SETUID:-yes}" = "yes" ]; then
+  chown root:video $PKG/usr/bin/$PRGNAM
+  chmod 4750 $PKG/usr/bin/$PRGNAM
+fi
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a README* COPYING $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/snapscreenshot/snapscreenshot.cur b/system/snapscreenshot/snapscreenshot.cur
new file mode 100644
index 000000000000..b674c0a8e0e4
--- /dev/null
+++ b/system/snapscreenshot/snapscreenshot.cur
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+# 20180704 bkw: wrapper for snapscreenshot, determines the current tty
+# and takes a screenshot of it by calling snapscreenshot with the
+# appropriate arguments.
+
+# I tried to make this work under X. You can find out which tty X is using
+# with: xprop -root | grep ^XFree86_VT | cut -d' ' -f3
+# However snapscreenshot itself fails because that console will be in
+# graphics mode (no text to read from /dev/vcs$TTY, so it'd give a
+# blank image).
+
+TTY="$( tty )"
+case "$TTY" in
+  /dev/tty?) TTY="$( echo $TTY | cut -dy -f2 )"
+     ;;
+  *) echo "You must run this from a console login session, not e.g. X or ssh" 1>&2
+     exit 1
+     ;;
+esac
+
+exec snapscreenshot --firstwin "$TTY" -c1 -x1 "$@"
diff --git a/system/snapscreenshot/snapscreenshot.info b/system/snapscreenshot/snapscreenshot.info
new file mode 100644
index 000000000000..e6d21eb10395
--- /dev/null
+++ b/system/snapscreenshot/snapscreenshot.info
@@ -0,0 +1,10 @@
+PRGNAM="snapscreenshot"
+VERSION="1.0.14.3"
+HOMEPAGE="https://bisqwit.iki.fi/source/snapscreenshot.html"
+DOWNLOAD="http://www.pc-freak.net/files/snapscreenshot-1.0.14.3.tar.bz2"
+MD5SUM="6332e26ed7b6bbddf1a3c3d11f82c39a"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="B. Watson"
+EMAIL="yalhcru@gmail.com"