system/pucrunch: Added (Hybrid Compressor).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

8 files changed, 880 insertions, 0 deletions

diff --git a/system/pucrunch/README b/system/pucrunch/README
new file mode 100644
index 0000000000000..355830462fc6c
--- /dev/null
+++ b/system/pucrunch/README
@@ -0,0 +1,12 @@
+pucrunch (compressor optimized for low-resource decompression)
+
+Pucrunch is a Hybrid LZ77 and RLE compressor, uses an Elias Gamma Code
+for lengths, mixture of Gamma Code and linear for LZ77 offset, and
+ranked RLE bytes indexed by the same Gamma Code. Uses no extra memory
+in decompression.
+
+The compressor can compress/decompress files for C64 (-c64), VIC20
+(-c20), C16/+4 (-c16), or for standalone decompressor (-c0).
+
+Assembly sources for example decompressors (for Commodore 64 and Nintendo
+GameBoy) are included.
diff --git a/system/pucrunch/cbmcombine.1 b/system/pucrunch/cbmcombine.1
new file mode 100644
index 0000000000000..f7f749d1d7be1
--- /dev/null
+++ b/system/pucrunch/cbmcombine.1
@@ -0,0 +1,178 @@
+.\" Man page generated from reStructuredText.
+.
+.TH CBMCOMBINE 1 "2017-09-06" "20081122" "SlackBuilds.org"
+.SH NAME
+cbmcombine \- combines Commodore 8-bit executables
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.\" RST source for cbmcombine(1) man page. Convert with:
+.
+.\" rst2man.py cbmcombine.rst > cbmcombine.1
+.
+.\" rst2man.py comes from the SBo development/docutils package.
+.
+.\" converting from pod:
+.
+.\" s/B<\([^>]*\)>/**\1**/g
+.
+.\" s/I<\([^>]*\)>/*\1*/g
+.
+.SH SYNOPSIS
+.sp
+cbmcombine [\fIinput\-file[,load\-address]\fP] [[[\fIinput\-file[,load\-address]\fP]] ...]
+.SH DESCRIPTION
+.sp
+cbmcombine combines several Commodore executables into one. All Commodore
+8\-bit machines (64, 128, VIC\-20, Plus4, 16, PET, etc) are supported,
+since they all use the same executable file format.
+.sp
+Files are read in the order listed on the command line. The combined
+executable is written to standard output. Each file\(aqs load address can
+be forced by adding a comma and the new address (in decimal, or in hex
+with 0x prefix), in which case the load address in the file will be read
+and ignored.
+.sp
+If any of the input files overlap the same area of memory, the overlap
+area will contain only data from the file(s) listed later in the command
+line. The output file\(aqs load address will be that of the input file with
+the lowest address, and it will extend to the highest address contained
+in any of the files. If there are gaps in the address space (areas where
+no file was loaded), the output will contain 0x00 bytes to fill the gap.
+.sp
+Load address overrides do NOT relocate code.
+.sp
+There are no switches (options) for cbmcombine.
+.SH EXAMPLES
+.sp
+The examples use 1024 byte input files, named after their load addresses
+in hex:
+.sp
+x1000.prg   Load address \fB$1000\fP, last address \fB$13FF\fP
+.sp
+x1400.prg   Load address \fB$1400\fP, last address \fB$17FF\fP
+.sp
+x1600.prg   Load address \fB$1600\fP, last address \fB$19FF\fP
+.sp
+cmbcombine x1000.prg x1400.prg > new.prg
+.INDENT 0.0
+.INDENT 3.5
+new.prg will have a load address of 0x1000, and contain data from
+0x1000 to 0x17ff.  Since x1000.prg ends at address 0x13ff, there is
+no overlap. If the order of arguments were swapped, the result would
+be the same.
+.UNINDENT
+.UNINDENT
+.sp
+cmbcombine x1000.prg x1600.prg > new.prg
+.INDENT 0.0
+.INDENT 3.5
+new.prg\(aqs load address will be \fB$1000\fP, and its end address will be \fB$19FF\fP\&.
+From \fB$1400\fP to \fB$15FF\fP, it will contain 512 bytes of zeroes, since none
+of the input files had any data at these addresses. If the order were
+swapped, the result would be the same.
+.UNINDENT
+.UNINDENT
+.sp
+cmbcombine x1400.prg x1600.prg > new.prg
+.INDENT 0.0
+.INDENT 3.5
+new.prg\(aqs load address will be \fB$1400\fP and it will end at \fB$19FF\fP\&. The
+data from \fB$1400\fP to \fB$15FF\fP comes from x1400.prg, and the rest from x1600.prg.
+.UNINDENT
+.UNINDENT
+.sp
+cmbcombine x1600.prg x1400.prg > new.prg
+.INDENT 0.0
+.INDENT 3.5
+As above, but data at \fB$1400\fP to \fB$15FF\fP comes from x1400.prg.
+.UNINDENT
+.UNINDENT
+.sp
+cmbcombine x1400.prg x1600.prg,0x1800 > new.prg
+.INDENT 0.0
+.INDENT 3.5
+new.prg loads at \fB$1400\fP and extends to \fB$1BFF\fP\&. Data at \fB$1400\fP to
+\fB$17FF\fP comes from x1400.prg, data at \fB$1800\fP to \fB$1BFF\fP comes from
+x1600.prg. If x1600.prg contains non\-relocatable code org\(aqed at \fB$1600\fP,
+it will fail to run when loaded at \fB$1800\fP\&.
+.UNINDENT
+.UNINDENT
+.SH EXIT STATUS
+.sp
+0 for success, non\-zero for failure. If any of the input files can\(aqt be
+read, the process exits with failure status, without writing anything
+to standard output.
+.SH BUGS
+.sp
+There is very little error\-checking. It may be possible to crash
+cbmcombine by feeding it bogus input.
+.sp
+There\(aqs no way to give cbmcombine a filename containing a comma.
+.sp
+Not exactly bugs, per se, but missing features:
+.INDENT 0.0
+.INDENT 3.5
+The user should be notified if files overlap and/or there are gaps in
+the output.
+.sp
+There should be warnings if a file wraps around the top of the 64K address
+space, or loads into dangerous or invalid areas such as ROM or page zero.
+Odds are, the file isn\(aqt really a valid CBM executable.
+.sp
+There should be a cbmsplit utility that does the opposite of cbmcombine.
+.UNINDENT
+.UNINDENT
+.SH COPYRIGHT
+.sp
+As of 21.12.2005 Pucrunch is under GNU LGPL. See:
+.INDENT 0.0
+.INDENT 3.5
+\fI\%http://creativecommons.org/licenses/LGPL/2.1/\fP
+\fI\%http://www.gnu.org/copyleft/lesser.html\fP
+.UNINDENT
+.UNINDENT
+.SH AUTHORS
+.sp
+cbmcombine was written by Pasi Ojala <\fI\%a1bert@iki.fi\fP>.
+.sp
+This man page written for the SlackBuilds.org project
+by B. Watson, and is licensed under the WTFPL.
+.SH SEE ALSO
+.sp
+pucrunch(1), exomizer(1), vice(1)
+.sp
+The pucrunch homepage: \fI\%http://a1bert.kapsi.fi/Dev/pucrunch/\fP
+.sp
+The full documentation and sample decompressor code:
+.INDENT 0.0
+.INDENT 3.5
+/usr/doc/pucrunch\-20081122/
+.UNINDENT
+.UNINDENT
+.\" Generated by docutils manpage writer.
+.
diff --git a/system/pucrunch/cbmcombine.rst b/system/pucrunch/cbmcombine.rst
new file mode 100644
index 0000000000000..5f9193e279a1f
--- /dev/null
+++ b/system/pucrunch/cbmcombine.rst
@@ -0,0 +1,147 @@
+.. RST source for cbmcombine(1) man page. Convert with:
+..   rst2man.py cbmcombine.rst > cbmcombine.1
+.. rst2man.py comes from the SBo development/docutils package.
+
+.. |version| replace:: 20081122
+.. |date| date::
+
+.. converting from pod:
+.. s/B<\([^>]*\)>/**\1**/g
+.. s/I<\([^>]*\)>/*\1*/g
+
+==========
+cbmcombine
+==========
+
+------------------------------------
+combines Commodore 8-bit executables
+------------------------------------
+
+:Manual section: 1
+:Manual group: SlackBuilds.org
+:Date: |date|
+:Version: |version|
+
+SYNOPSIS
+========
+
+cbmcombine [*input-file[,load-address]*] [[[*input-file[,load-address]*]] ...]
+
+DESCRIPTION
+===========
+
+cbmcombine combines several Commodore executables into one. All Commodore
+8-bit machines (64, 128, VIC-20, Plus4, 16, PET, etc) are supported,
+since they all use the same executable file format.
+
+Files are read in the order listed on the command line. The combined
+executable is written to standard output. Each file's load address can
+be forced by adding a comma and the new address (in decimal, or in hex
+with 0x prefix), in which case the load address in the file will be read
+and ignored.
+
+If any of the input files overlap the same area of memory, the overlap
+area will contain only data from the file(s) listed later in the command
+line. The output file's load address will be that of the input file with
+the lowest address, and it will extend to the highest address contained
+in any of the files. If there are gaps in the address space (areas where
+no file was loaded), the output will contain 0x00 bytes to fill the gap.
+
+Load address overrides do NOT relocate code.
+
+There are no switches (options) for cbmcombine.
+
+EXAMPLES
+========
+
+The examples use 1024 byte input files, named after their load addresses
+in hex:
+
+x1000.prg   Load address **$1000**, last address **$13FF**
+
+x1400.prg   Load address **$1400**, last address **$17FF**
+
+x1600.prg   Load address **$1600**, last address **$19FF**
+
+cmbcombine x1000.prg x1400.prg > new.prg
+
+  new.prg will have a load address of 0x1000, and contain data from
+  0x1000 to 0x17ff.  Since x1000.prg ends at address 0x13ff, there is
+  no overlap. If the order of arguments were swapped, the result would
+  be the same.
+
+cmbcombine x1000.prg x1600.prg > new.prg
+
+  new.prg's load address will be **$1000**, and its end address will be **$19FF**.
+  From **$1400** to **$15FF**, it will contain 512 bytes of zeroes, since none
+  of the input files had any data at these addresses. If the order were
+  swapped, the result would be the same.
+
+cmbcombine x1400.prg x1600.prg > new.prg
+
+  new.prg's load address will be **$1400** and it will end at **$19FF**. The
+  data from **$1400** to **$15FF** comes from x1400.prg, and the rest from x1600.prg.
+
+cmbcombine x1600.prg x1400.prg > new.prg
+
+  As above, but data at **$1400** to **$15FF** comes from x1400.prg.
+
+cmbcombine x1400.prg x1600.prg,0x1800 > new.prg
+
+  new.prg loads at **$1400** and extends to **$1BFF**. Data at **$1400** to
+  **$17FF** comes from x1400.prg, data at **$1800** to **$1BFF** comes from
+  x1600.prg. If x1600.prg contains non-relocatable code org'ed at **$1600**,
+  it will fail to run when loaded at **$1800**.
+
+EXIT STATUS
+===========
+
+0 for success, non-zero for failure. If any of the input files can't be
+read, the process exits with failure status, without writing anything
+to standard output.
+
+BUGS
+====
+
+There is very little error-checking. It may be possible to crash
+cbmcombine by feeding it bogus input.
+
+There's no way to give cbmcombine a filename containing a comma.
+
+Not exactly bugs, per se, but missing features:
+
+  The user should be notified if files overlap and/or there are gaps in
+  the output.
+
+  There should be warnings if a file wraps around the top of the 64K address
+  space, or loads into dangerous or invalid areas such as ROM or page zero.
+  Odds are, the file isn't really a valid CBM executable.
+
+  There should be a cbmsplit utility that does the opposite of cbmcombine.
+
+COPYRIGHT
+=========
+
+As of 21.12.2005 Pucrunch is under GNU LGPL. See\:
+
+  http://creativecommons.org/licenses/LGPL/2.1/
+  http://www.gnu.org/copyleft/lesser.html
+
+AUTHORS
+=======
+
+cbmcombine was written by Pasi Ojala <a1bert@iki.fi>.
+
+This man page written for the SlackBuilds.org project
+by B. Watson, and is licensed under the WTFPL.
+
+SEE ALSO
+========
+
+pucrunch(1), exomizer(1), vice(1)
+
+The pucrunch homepage: http://a1bert.kapsi.fi/Dev/pucrunch/
+
+The full documentation and sample decompressor code\:
+
+  /usr/doc/pucrunch-|version|/
diff --git a/system/pucrunch/pucrunch.1 b/system/pucrunch/pucrunch.1
new file mode 100644
index 0000000000000..e74f0c3c76858
--- /dev/null
+++ b/system/pucrunch/pucrunch.1
@@ -0,0 +1,223 @@
+.\" Man page generated from reStructuredText.
+.
+.TH PUCRUNCH 1 "2017-09-06" "20081122" "SlackBuilds.org"
+.SH NAME
+pucrunch \- compressor optimized for low-resource decompression
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.\" RST source for pucrunch(1) man page. Convert with:
+.
+.\" rst2man.py pucrunch.rst > pucrunch.1
+.
+.\" rst2man.py comes from the SBo development/docutils package.
+.
+.\" converting from pod:
+.
+.\" s/B<\([^>]*\)>/**\1**/g
+.
+.\" s/I<\([^>]*\)>/*\1*/g
+.
+.SH SYNOPSIS
+.sp
+pucrunch [\fI\-options\fP] [\fIinfile]\fP [\fIoutfile\fP]]
+.SH DESCRIPTION
+.sp
+Pucrunch is a Hybrid LZ77 and RLE compressor, uses an Elias Gamma Code
+for lengths, mixture of Gamma Code and linear for LZ77 offset, and
+ranked RLE bytes indexed by the same Gamma Code. Uses no extra memory
+in decompression.
+.sp
+Input files can be arbitrary data (with \fI\-d\fP option) or executables for
+Commodore 64, VIC\-20, C16, or Plus/4. Output is either a self\-extracting
+compressed Commodore executable, or a compressed data file suitable for
+extracting via \fIpucrunch \-u\fP or the included decompressor routines. See
+/usr/doc/pucrunch\-20081122/examples/*.asm for 6502, 6809, and Z80
+assembly code implementations of the decompressor.
+.sp
+Note: Because pucrunch contains both RLE and LZ77 and they are
+specifically designed to work together, DO NOT RLE\-pack your files
+first, because it will decrease the overall compression ratio.
+.SH OPTIONS
+.sp
+Pucrunch expects any number of options and up to two filenames. If you
+only give one filename, the compressed file is written to the stardard
+output. If you leave out both filenames, the input is in addition
+read from the standard input. Options needing no value can be grouped
+together. All values can be given in decimal (no prefix), octal (prefix
+0), or hexadecimal (prefix $ or 0x). [\fINote\fP: escape the \fI$\fP with quotes
+or a backslash, to avoid your shell treating it as a metacharacter]
+.sp
+Example: pucrunch demo.prg demo.pck \-m6 \-fs \-p2 \-x0xc010
+.INDENT 0.0
+.TP
+.B \fB\-c<machine>\fP
+Selects the machine. Possible values are 128 (C128), 64 (C64),
+20 (VIC20), 16 (C16/Plus4), 0 (standalone). The default is 64, i.e.
+Commodore 64.
+.sp
+If you use \-c0, a file without the embedded decompression code
+is produced. This can be decompressed with a standalone routine
+and of course with pucrunch itself. Options marked with [\fISFX\fP]
+have no effect if \-c0 is used.
+.sp
+The 128\-mode is not fully developed yet. Currently it overwrites
+memory locations $f7\-$f9 (Text mode lockout, Scrolling, and Bell
+settings) without restoring them later.
+.TP
+.B \fB\-a\fP
+[\fISFX\fP] Avoids video matrix if possible. Only affects VIC20 mode.
+.TP
+.B \fB\-d\fP
+[\fISFX\fP] Indicates that the file does not have a load address. A load
+address can be specified with \-l option. The default load
+address if none is specified is 0x258.
+.TP
+.B \fB\-l<addr>\fP
+[\fISFX\fP] Overrides the file load address or sets it for data files.
+.TP
+.B \fB\-x<addr>\fP
+[\fISFX\fP] Sets the execution address or overrides automatically detected
+execution address. Pucrunch checks whether a SYS\-line is present
+and tries to decode the address. Plain decimal addresses and
+addresses in parenthesis are read correctly, otherwise you need
+to override any incorrect value with this option.
+.TP
+.B \fB\-e<val>\fP
+Fixes the number of escape bits used. You don\(aqt usually need or
+want to use this option.
+.TP
+.B \fB\-r<val>\fP
+Sets the LZ77 search range. By specifying 0 you get only RLE.
+You don\(aqt usually need or want to use this option.
+.TP
+.B \fB+f\fP
+Disables 2MHz mode for C128 and 2X mode in C16/+4.
+.TP
+.B \fB\-fbasic\fP
+[\fISFX\fP] Selects the decompressor for basic programs. This version
+performs the RUN function and enters the basic interpreter
+automatically. Currently only C64 and VIC20 are supported.
+.TP
+.B \fB\-ffast\fP
+[\fISFX\fP] Selects the faster, but longer decompressor version, if such
+version is available for the selected machine and selected
+options. Without this option the medium\-speed and medium\-size
+decompressor is used.
+.TP
+.B \fB\-fshort\fP
+[\fISFX\fP] Selects the shorter, but slower decompressor version, if such
+version is available for the selected machine and selected
+options. Without this option the medium\-speed and medium\-size
+decompressor is used.
+.TP
+.B \fB\-flist\fP
+List all available decompressors (the \fI\-f\fP options above), for all
+supported machines. The list may contain more decompressors than are
+shown above (the extras might be experimental, use at your own risk).
+.TP
+.B \fB\-fdelta\fP
+Allows delta matching. In this mode only the waveforms in the
+data matter, any offset is allowed and added in the
+decompression. Note that the decompressor becomes 22 bytes
+longer if delta matching is used and the short decompressor
+can\(aqt be used (24 bytes more). This means that delta matching
+must get more than 46 bytes of total gain to get any net
+savings. So, always compare the result size to a version
+compressed without \-fdelta.
+.sp
+Also, the compression time increases because delta matching is
+more complicated. The increase is not 256\-fold though, somewhere
+around 6\-7 times is more typical. So, use this option with care
+and do not be surprised if it doesn\(aqt help on your files.
+.TP
+.B \fB\-n\fP
+Disables RLE and LZ77 length optimization. You don\(aqt usually
+need or want to use this option.
+.TP
+.B \fB\-s\fP
+Display full statistics instead of a compression summary.
+.TP
+.B \fB\-p<bits>\fP
+Fixes the number of extra LZ77 position bits used for the low
+part. If pucrunch tells you to to use this option, see if the
+new setting gives better compression.
+.TP
+.B \fB\-m<bits>\fP
+Sets the maximum length value. The value should be 5, 6, or 7.
+The lengths are 64, 128 and 256, respectively. If pucrunch tells
+you to to use this option, see if the new setting gives better
+compression. The default value is 7.
+.TP
+.B \fB\-i<0|1>\fP
+Defines the interrupt enable state to be used after
+decompression. Value 0 disables interrupts, other values enable
+interrupts. The default is to enable interrupts after
+decompression.
+.TP
+.B \fB\-g<byte>\fP
+Defines the memory configuration to be used after decompression.
+Only used for C64 mode (\-c64). The default value is $37.
+.TP
+.B \fB\-u\fP
+Unpacks/decompresses a file instead of compressing it. The file
+to decompress must have a decompression header compatible with
+one of the decompression headers in the current version.
+.TP
+.B \fB\-h\fP
+Print built\-in help and exit.
+.UNINDENT
+.SH COPYRIGHT
+.sp
+As of 21.12.2005 Pucrunch is under GNU LGPL. See:
+.INDENT 0.0
+.INDENT 3.5
+\fI\%http://creativecommons.org/licenses/LGPL/2.1/\fP
+\fI\%http://www.gnu.org/copyleft/lesser.html\fP
+.UNINDENT
+.UNINDENT
+.SH AUTHORS
+.sp
+pucrunch was written by Pasi Ojala <\fI\%a1bert@iki.fi\fP>.
+.sp
+This man page consist of excerpts from the author\(aqs documentation. It
+was written for the SlackBuilds.org project by B. Watson, and is licensed
+under the same terms as the original docs.
+.SH SEE ALSO
+.sp
+exomizer(1)
+.sp
+The pucrunch homepage: \fI\%http://a1bert.kapsi.fi/Dev/pucrunch/\fP
+.sp
+The full documentation and sample decompressor code:
+.INDENT 0.0
+.INDENT 3.5
+/usr/doc/pucrunch\-20081122/
+.UNINDENT
+.UNINDENT
+.\" Generated by docutils manpage writer.
+.
diff --git a/system/pucrunch/pucrunch.SlackBuild b/system/pucrunch/pucrunch.SlackBuild
new file mode 100644
index 0000000000000..2c207fd79be48
--- /dev/null
+++ b/system/pucrunch/pucrunch.SlackBuild
@@ -0,0 +1,86 @@
+#!/bin/sh
+
+# Slackware build script for pucrunch
+
+# Written by B. Watson (yalhcru@gmail.com)
+
+# Licensed under the WTFPL. See http://www.wtfpl.net/txt/copying/ for details.
+
+# Note about the source: upstream doesn't provide an archive, instead each
+# file is linked to from the homepage. I created pucrunch-20081122.tar.xz
+# by downloading all the individual files. The version number is the
+# 'Last Updated' date on the homepage.
+
+PRGNAM=pucrunch
+VERSION=${VERSION:-20081122}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.xz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+sed -i "s,-O,$SLKCFLAGS," Makefile
+make
+
+# no Makefile for this, plus it needs special incantations...
+gcc $SLKCFLAGS -funsigned-char \
+    -include sys/param.h -Dfar= -Dmin=MIN -Dmax=MAX \
+    -o cbmcombine cbmcombine.c
+
+mkdir -p $PKG/usr/bin
+install -s -m0755 $PRGNAM cbmcombine $PKG/usr/bin
+
+# man page created by script author from the HTML docs:
+mkdir -p $PKG/usr/man/man1
+gzip -9c < $CWD/$PRGNAM.1 > $PKG/usr/man/man1/$PRGNAM.1.gz
+gzip -9c < $CWD/cbmcombine.1 > $PKG/usr/man/man1/cbmcombine.1.gz
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/examples
+cp -a $PRGNAM.html $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a *.asm $PKG/usr/doc/$PRGNAM-$VERSION/examples
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/pucrunch/pucrunch.info b/system/pucrunch/pucrunch.info
new file mode 100644
index 0000000000000..a6f3e16bc03de
--- /dev/null
+++ b/system/pucrunch/pucrunch.info
@@ -0,0 +1,10 @@
+PRGNAM="pucrunch"
+VERSION="20081122"
+HOMEPAGE="http://a1bert.kapsi.fi/Dev/pucrunch/"
+DOWNLOAD="http://urchlay.naptime.net/~urchlay/src/pucrunch-20081122.tar.xz"
+MD5SUM="dbc3e129a9d963e96f34a3495307aeff"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="B. Watson"
+EMAIL="yalhcru@gmail.com"
diff --git a/system/pucrunch/pucrunch.rst b/system/pucrunch/pucrunch.rst
new file mode 100644
index 0000000000000..92abd479bdfa5
--- /dev/null
+++ b/system/pucrunch/pucrunch.rst
@@ -0,0 +1,205 @@
+.. RST source for pucrunch(1) man page. Convert with:
+..   rst2man.py pucrunch.rst > pucrunch.1
+.. rst2man.py comes from the SBo development/docutils package.
+
+.. |version| replace:: 20081122
+.. |date| date::
+
+.. converting from pod:
+.. s/B<\([^>]*\)>/**\1**/g
+.. s/I<\([^>]*\)>/*\1*/g
+
+========
+pucrunch
+========
+
+---------------------------------------------------
+compressor optimized for low-resource decompression
+---------------------------------------------------
+
+:Manual section: 1
+:Manual group: SlackBuilds.org
+:Date: |date|
+:Version: |version|
+
+SYNOPSIS
+========
+
+pucrunch [*-options*] [*infile]* [*outfile*]]
+
+DESCRIPTION
+===========
+
+Pucrunch is a Hybrid LZ77 and RLE compressor, uses an Elias Gamma Code
+for lengths, mixture of Gamma Code and linear for LZ77 offset, and
+ranked RLE bytes indexed by the same Gamma Code. Uses no extra memory
+in decompression.
+
+Input files can be arbitrary data (with *-d* option) or executables for
+Commodore 64, VIC-20, C16, or Plus/4. Output is either a self-extracting
+compressed Commodore executable, or a compressed data file suitable for
+extracting via *pucrunch -u* or the included decompressor routines. See
+/usr/doc/pucrunch-|version|/examples/\*.asm for 6502, 6809, and Z80
+assembly code implementations of the decompressor.
+
+Note: Because pucrunch contains both RLE and LZ77 and they are
+specifically designed to work together, DO NOT RLE-pack your files
+first, because it will decrease the overall compression ratio.
+
+OPTIONS
+=======
+
+Pucrunch expects any number of options and up to two filenames. If you
+only give one filename, the compressed file is written to the stardard
+output. If you leave out both filenames, the input is in addition
+read from the standard input. Options needing no value can be grouped
+together. All values can be given in decimal (no prefix), octal (prefix
+0), or hexadecimal (prefix $ or 0x). [*Note*: escape the *$* with quotes
+or a backslash, to avoid your shell treating it as a metacharacter]
+
+Example: pucrunch demo.prg demo.pck -m6 -fs -p2 -x0xc010
+
+**-c<machine>**
+       Selects the machine. Possible values are 128 (C128), 64 (C64),
+       20 (VIC20), 16 (C16/Plus4), 0 (standalone). The default is 64, i.e.
+       Commodore 64.
+
+       If you use -c0, a file without the embedded decompression code
+       is produced. This can be decompressed with a standalone routine
+       and of course with pucrunch itself. Options marked with [*SFX*]
+       have no effect if -c0 is used.
+
+       The 128-mode is not fully developed yet. Currently it overwrites
+       memory locations $f7-$f9 (Text mode lockout, Scrolling, and Bell
+       settings) without restoring them later.
+
+**-a**
+       [*SFX*] Avoids video matrix if possible. Only affects VIC20 mode.
+
+**-d**
+       [*SFX*] Indicates that the file does not have a load address. A load
+       address can be specified with -l option. The default load
+       address if none is specified is 0x258.
+
+**-l<addr>**
+       [*SFX*] Overrides the file load address or sets it for data files.
+
+**-x<addr>**
+       [*SFX*] Sets the execution address or overrides automatically detected
+       execution address. Pucrunch checks whether a SYS-line is present
+       and tries to decode the address. Plain decimal addresses and
+       addresses in parenthesis are read correctly, otherwise you need
+       to override any incorrect value with this option.
+
+**-e<val>**
+       Fixes the number of escape bits used. You don't usually need or
+       want to use this option.
+
+**-r<val>**
+       Sets the LZ77 search range. By specifying 0 you get only RLE.
+       You don't usually need or want to use this option.
+
+**+f**
+       Disables 2MHz mode for C128 and 2X mode in C16/+4.
+
+**-fbasic**
+       [*SFX*] Selects the decompressor for basic programs. This version
+       performs the RUN function and enters the basic interpreter
+       automatically. Currently only C64 and VIC20 are supported.
+
+**-ffast**
+       [*SFX*] Selects the faster, but longer decompressor version, if such
+       version is available for the selected machine and selected
+       options. Without this option the medium-speed and medium-size
+       decompressor is used.
+
+**-fshort**
+       [*SFX*] Selects the shorter, but slower decompressor version, if such
+       version is available for the selected machine and selected
+       options. Without this option the medium-speed and medium-size
+       decompressor is used.
+
+**-flist**
+       List all available decompressors (the *-f* options above), for all
+       supported machines. The list may contain more decompressors than are
+       shown above (the extras might be experimental, use at your own risk).
+
+**-fdelta**
+       Allows delta matching. In this mode only the waveforms in the
+       data matter, any offset is allowed and added in the
+       decompression. Note that the decompressor becomes 22 bytes
+       longer if delta matching is used and the short decompressor
+       can't be used (24 bytes more). This means that delta matching
+       must get more than 46 bytes of total gain to get any net
+       savings. So, always compare the result size to a version
+       compressed without -fdelta.
+
+       Also, the compression time increases because delta matching is
+       more complicated. The increase is not 256-fold though, somewhere
+       around 6-7 times is more typical. So, use this option with care
+       and do not be surprised if it doesn't help on your files.
+
+**-n**
+       Disables RLE and LZ77 length optimization. You don't usually
+       need or want to use this option.
+
+**-s**
+       Display full statistics instead of a compression summary.
+
+**-p<bits>**
+       Fixes the number of extra LZ77 position bits used for the low
+       part. If pucrunch tells you to to use this option, see if the
+       new setting gives better compression.
+
+**-m<bits>**
+       Sets the maximum length value. The value should be 5, 6, or 7.
+       The lengths are 64, 128 and 256, respectively. If pucrunch tells
+       you to to use this option, see if the new setting gives better
+       compression. The default value is 7.
+
+**-i<0|1>**
+       Defines the interrupt enable state to be used after
+       decompression. Value 0 disables interrupts, other values enable
+       interrupts. The default is to enable interrupts after
+       decompression.
+
+**-g<byte>**
+       Defines the memory configuration to be used after decompression.
+       Only used for C64 mode (-c64). The default value is $37.
+
+**-u**
+       Unpacks/decompresses a file instead of compressing it. The file
+       to decompress must have a decompression header compatible with
+       one of the decompression headers in the current version.
+
+**-h**
+       Print built-in help and exit.
+
+
+COPYRIGHT
+=========
+
+As of 21.12.2005 Pucrunch is under GNU LGPL. See\:
+
+  http://creativecommons.org/licenses/LGPL/2.1/
+  http://www.gnu.org/copyleft/lesser.html
+
+AUTHORS
+=======
+
+pucrunch was written by Pasi Ojala <a1bert@iki.fi>.
+
+This man page consists of excerpts from the author's documentation. It
+was written for the SlackBuilds.org project by B. Watson, and is licensed
+under the same terms as the original docs.
+
+SEE ALSO
+========
+
+cbmcombine(1), exomizer(1), vice(1)
+
+The pucrunch homepage: http://a1bert.kapsi.fi/Dev/pucrunch/
+
+The full documentation and sample decompressor code\:
+
+  /usr/doc/pucrunch-|version|/
diff --git a/system/pucrunch/slack-desc b/system/pucrunch/slack-desc
new file mode 100644
index 0000000000000..2c48d0aa33ebe
--- /dev/null
+++ b/system/pucrunch/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+        |-----handy-ruler------------------------------------------------------|
+pucrunch: pucrunch (compressor optimized for low-resource decompression)
+pucrunch:
+pucrunch: Pucrunch is a Hybrid LZ77 and RLE compressor, uses an Elias Gamma
+pucrunch: Code for lengths, mixture of Gamma Code and linear for LZ77 offset,
+pucrunch: and ranked RLE bytes indexed by the same Gamma Code. Uses no extra
+pucrunch: memory in decompression.
+pucrunch:
+pucrunch: Assembly sources for example decompressors (for Commodore 64 and
+pucrunch: Nintendo GameBoy) are included.
+pucrunch:
+pucrunch: