system/pucrunch: Added (Hybrid Compressor).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

1 files changed, 205 insertions, 0 deletions

diff --git a/system/pucrunch/pucrunch.rst b/system/pucrunch/pucrunch.rst
new file mode 100644
index 000000000000..92abd479bdfa
--- /dev/null
+++ b/system/pucrunch/pucrunch.rst
@@ -0,0 +1,205 @@
+.. RST source for pucrunch(1) man page. Convert with:
+..   rst2man.py pucrunch.rst > pucrunch.1
+.. rst2man.py comes from the SBo development/docutils package.
+
+.. |version| replace:: 20081122
+.. |date| date::
+
+.. converting from pod:
+.. s/B<\([^>]*\)>/**\1**/g
+.. s/I<\([^>]*\)>/*\1*/g
+
+========
+pucrunch
+========
+
+---------------------------------------------------
+compressor optimized for low-resource decompression
+---------------------------------------------------
+
+:Manual section: 1
+:Manual group: SlackBuilds.org
+:Date: |date|
+:Version: |version|
+
+SYNOPSIS
+========
+
+pucrunch [*-options*] [*infile]* [*outfile*]]
+
+DESCRIPTION
+===========
+
+Pucrunch is a Hybrid LZ77 and RLE compressor, uses an Elias Gamma Code
+for lengths, mixture of Gamma Code and linear for LZ77 offset, and
+ranked RLE bytes indexed by the same Gamma Code. Uses no extra memory
+in decompression.
+
+Input files can be arbitrary data (with *-d* option) or executables for
+Commodore 64, VIC-20, C16, or Plus/4. Output is either a self-extracting
+compressed Commodore executable, or a compressed data file suitable for
+extracting via *pucrunch -u* or the included decompressor routines. See
+/usr/doc/pucrunch-|version|/examples/\*.asm for 6502, 6809, and Z80
+assembly code implementations of the decompressor.
+
+Note: Because pucrunch contains both RLE and LZ77 and they are
+specifically designed to work together, DO NOT RLE-pack your files
+first, because it will decrease the overall compression ratio.
+
+OPTIONS
+=======
+
+Pucrunch expects any number of options and up to two filenames. If you
+only give one filename, the compressed file is written to the stardard
+output. If you leave out both filenames, the input is in addition
+read from the standard input. Options needing no value can be grouped
+together. All values can be given in decimal (no prefix), octal (prefix
+0), or hexadecimal (prefix $ or 0x). [*Note*: escape the *$* with quotes
+or a backslash, to avoid your shell treating it as a metacharacter]
+
+Example: pucrunch demo.prg demo.pck -m6 -fs -p2 -x0xc010
+
+**-c<machine>**
+       Selects the machine. Possible values are 128 (C128), 64 (C64),
+       20 (VIC20), 16 (C16/Plus4), 0 (standalone). The default is 64, i.e.
+       Commodore 64.
+
+       If you use -c0, a file without the embedded decompression code
+       is produced. This can be decompressed with a standalone routine
+       and of course with pucrunch itself. Options marked with [*SFX*]
+       have no effect if -c0 is used.
+
+       The 128-mode is not fully developed yet. Currently it overwrites
+       memory locations $f7-$f9 (Text mode lockout, Scrolling, and Bell
+       settings) without restoring them later.
+
+**-a**
+       [*SFX*] Avoids video matrix if possible. Only affects VIC20 mode.
+
+**-d**
+       [*SFX*] Indicates that the file does not have a load address. A load
+       address can be specified with -l option. The default load
+       address if none is specified is 0x258.
+
+**-l<addr>**
+       [*SFX*] Overrides the file load address or sets it for data files.
+
+**-x<addr>**
+       [*SFX*] Sets the execution address or overrides automatically detected
+       execution address. Pucrunch checks whether a SYS-line is present
+       and tries to decode the address. Plain decimal addresses and
+       addresses in parenthesis are read correctly, otherwise you need
+       to override any incorrect value with this option.
+
+**-e<val>**
+       Fixes the number of escape bits used. You don't usually need or
+       want to use this option.
+
+**-r<val>**
+       Sets the LZ77 search range. By specifying 0 you get only RLE.
+       You don't usually need or want to use this option.
+
+**+f**
+       Disables 2MHz mode for C128 and 2X mode in C16/+4.
+
+**-fbasic**
+       [*SFX*] Selects the decompressor for basic programs. This version
+       performs the RUN function and enters the basic interpreter
+       automatically. Currently only C64 and VIC20 are supported.
+
+**-ffast**
+       [*SFX*] Selects the faster, but longer decompressor version, if such
+       version is available for the selected machine and selected
+       options. Without this option the medium-speed and medium-size
+       decompressor is used.
+
+**-fshort**
+       [*SFX*] Selects the shorter, but slower decompressor version, if such
+       version is available for the selected machine and selected
+       options. Without this option the medium-speed and medium-size
+       decompressor is used.
+
+**-flist**
+       List all available decompressors (the *-f* options above), for all
+       supported machines. The list may contain more decompressors than are
+       shown above (the extras might be experimental, use at your own risk).
+
+**-fdelta**
+       Allows delta matching. In this mode only the waveforms in the
+       data matter, any offset is allowed and added in the
+       decompression. Note that the decompressor becomes 22 bytes
+       longer if delta matching is used and the short decompressor
+       can't be used (24 bytes more). This means that delta matching
+       must get more than 46 bytes of total gain to get any net
+       savings. So, always compare the result size to a version
+       compressed without -fdelta.
+
+       Also, the compression time increases because delta matching is
+       more complicated. The increase is not 256-fold though, somewhere
+       around 6-7 times is more typical. So, use this option with care
+       and do not be surprised if it doesn't help on your files.
+
+**-n**
+       Disables RLE and LZ77 length optimization. You don't usually
+       need or want to use this option.
+
+**-s**
+       Display full statistics instead of a compression summary.
+
+**-p<bits>**
+       Fixes the number of extra LZ77 position bits used for the low
+       part. If pucrunch tells you to to use this option, see if the
+       new setting gives better compression.
+
+**-m<bits>**
+       Sets the maximum length value. The value should be 5, 6, or 7.
+       The lengths are 64, 128 and 256, respectively. If pucrunch tells
+       you to to use this option, see if the new setting gives better
+       compression. The default value is 7.
+
+**-i<0|1>**
+       Defines the interrupt enable state to be used after
+       decompression. Value 0 disables interrupts, other values enable
+       interrupts. The default is to enable interrupts after
+       decompression.
+
+**-g<byte>**
+       Defines the memory configuration to be used after decompression.
+       Only used for C64 mode (-c64). The default value is $37.
+
+**-u**
+       Unpacks/decompresses a file instead of compressing it. The file
+       to decompress must have a decompression header compatible with
+       one of the decompression headers in the current version.
+
+**-h**
+       Print built-in help and exit.
+
+
+COPYRIGHT
+=========
+
+As of 21.12.2005 Pucrunch is under GNU LGPL. See\:
+
+  http://creativecommons.org/licenses/LGPL/2.1/
+  http://www.gnu.org/copyleft/lesser.html
+
+AUTHORS
+=======
+
+pucrunch was written by Pasi Ojala <a1bert@iki.fi>.
+
+This man page consists of excerpts from the author's documentation. It
+was written for the SlackBuilds.org project by B. Watson, and is licensed
+under the same terms as the original docs.
+
+SEE ALSO
+========
+
+cbmcombine(1), exomizer(1), vice(1)
+
+The pucrunch homepage: http://a1bert.kapsi.fi/Dev/pucrunch/
+
+The full documentation and sample decompressor code\:
+
+  /usr/doc/pucrunch-|version|/