system/pcsc-lite: Added to 12.0 repository

7 files changed, 286 insertions, 0 deletions

diff --git a/system/pcsc-lite/README b/system/pcsc-lite/README
new file mode 100644
index 0000000000000..f1487907c4701
--- /dev/null
+++ b/system/pcsc-lite/README
@@ -0,0 +1,26 @@
+PC/SC-lite (Personal Computer/Smart Card interface)
+
+This is middleware to access a smart card using SCard API (PC/SC) Its purpose 
+is to provide a Windows(R) SCard interface in a very small form factor for 
+communicating to smart cards and readers. It is released under BSD license.
+
+It is compiled with --enable-usbdropdir=/usr/lib/pcsc/drivers
+This will be the destination directory for usb readers' drivers (ccid, cardman,
+others).
+
+NOTE: drivers are not included and must be compiled and installed separately. 
+See /usr/doc/pcsc-lite-1.4.99/DRIVERS for more information on getting and 
+installing specifc drivers.
+
+For serial and pcmcia readers only, it is necessary to edit files in 
+/etc/reader.conf.d/ and run "/usr/sbin/update-reader.conf".
+
+Compiling with "DEBUGATR=1 ./pcsc-lite.SlackBuild" enables ATR parsing debug 
+output messages.
+
+To start PC/SC-lite daemon, run "/etc/rc.d/rc.pcscd start".
+For pcmcia readers, this daemon should be started after rc.pcmcia - this is 
+most easily accomplished by adding the following to /etc/rc.d/rc.local:
+	if [ -x /etc/rc.d/rc.pcscd ]; then
+		/etc/rc.d/rc.pcscd start
+	fi
diff --git a/system/pcsc-lite/docs-DRIVERS.diff b/system/pcsc-lite/docs-DRIVERS.diff
new file mode 100644
index 0000000000000..86d4f8163edc1
--- /dev/null
+++ b/system/pcsc-lite/docs-DRIVERS.diff
@@ -0,0 +1,23 @@
+
+diff -Nur pcsc-lite-1.4.99.orig/DRIVERS pcsc-lite-1.4.99/DRIVERS
+--- DRIVERS.bak	2007-10-13 16:21:11.000000000 -0500
++++ DRIVERS	2008-03-06 00:21:53.119195118 -0600
+@@ -2,8 +2,8 @@
+ 
+ To install USB drivers, download the driver from http://www.linuxnet.com/
+ and copy it to a temporary location.  After you have unarchived the files
+-copy the directory to /usr/local/pcsc/drivers/.  If the directory
+-/usr/local/pcsc/drivers/ does not exist create it before copying the driver
++copy the directory to /usr/lib/pcsc/drivers/.  If the directory
++/usr/lib/pcsc/drivers/ does not exist create it before copying the driver
+ directory to it.
+ 
+ Example Mac OS X, Linux 2.4:
+@@ -28,3 +28,7 @@
+ Refer to the driver README for more information.
+ 
+ $Id: DRIVERS 867 2004-05-13 13:25:06Z rousseau $
++
++# Edited by Robby Workman <rworkman@slackbuilds.org> to reflect correct
++# information when installed from SlackBuilds.org  --  20080305
++
diff --git a/system/pcsc-lite/doinst.sh b/system/pcsc-lite/doinst.sh
new file mode 100644
index 0000000000000..7669b280aaa56
--- /dev/null
+++ b/system/pcsc-lite/doinst.sh
@@ -0,0 +1,24 @@
+#!/bin/sh
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.pcscd.new:
+if [ -e etc/rc.d/rc.pcscd ]; then
+  cp -a etc/rc.d/rc.pcscd etc/rc.d/rc.pcscd.new.incoming
+  cat etc/rc.d/rc.pcscd.new > etc/rc.d/rc.pcscd.new.incoming
+  mv etc/rc.d/rc.pcscd.new.incoming etc/rc.d/rc.pcscd.new
+fi
+
+config etc/rc.d/rc.pcscd.new
+config etc/reader.conf.d/reader.conf.new
+
diff --git a/system/pcsc-lite/pcsc-lite.SlackBuild b/system/pcsc-lite/pcsc-lite.SlackBuild
new file mode 100644
index 0000000000000..17c378a23f2b9
--- /dev/null
+++ b/system/pcsc-lite/pcsc-lite.SlackBuild
@@ -0,0 +1,131 @@
+#!/bin/sh
+
+# Slackware build script for pcsc-lite
+
+# Copyright 2007  LukenShiro <lukenshiro@ngi.it>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=pcsc-lite
+VERSION=1.4.99
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+DEBUGATR=${DEBUGATR:-0}	# Debug is off by default
+DOCFILES="DRIVERS SECURITY ChangeLog COPYING ChangeLog.svn HELP NEWS TODO AUTHORS INSTALL README"  
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+fi
+
+set -e 	# Exit on most errors
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+
+# Fix the DRIVERS file to reflect the correct drivers directory as built
+# with this script
+patch -p0 < $CWD/docs-DRIVERS.diff || exit 1
+
+# ATR (answer to reset) debug parsing output 
+case "$DEBUGATR" in
+    0)	DEBUGATR_FLAG="disable-debugatr"
+	;;
+    *)	DEBUGATR_FLAG="enable-debugatr"
+	;;
+esac
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --enable-confdir=/etc \
+  --localstatedir=/var \
+  --enable-ipcdir=/var/run \
+  --enable-runpid=/var/run/pcscd.pid \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --enable-usbdropdir="/usr/lib/pcsc/drivers" \
+  --enable-muscledropdir="/usr/lib/pcsc/services" \
+  --${DEBUGATR_FLAG}
+
+make
+make install DESTDIR=$PKG
+
+# formaticc manpage is not automatically installed
+mkdir -p $PKG/usr/man/man1
+install -m 0644 doc/formaticc.1 $PKG/usr/man/man1/
+
+# PC/SC-lite slackware-compliant daemon
+mkdir -p $PKG/etc/rc.d
+install -m 0755 $CWD/rc.pcscd $PKG/etc/rc.d/rc.pcscd.new
+
+# Don't clobber the config file
+mv $PKG/etc/reader.conf.d/reader.conf $PKG/etc/reader.conf.d/reader.conf.new
+
+# Create the directory for drivers and such (not included with this package)
+mkdir -p $PKG/usr/lib/pcsc/{drivers,services}
+
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+( cd $PKG/usr/man
+  find . -type f -exec gzip -9 {} \;
+  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+)
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/
+cp -a $DOCFILES $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+cat $CWD/README > $PKG/usr/doc/$PRGNAM-$VERSION/README.SBo
+## .pdf api documentation files seem not to be built from .tex sources during make
+## Most people don't need/want api docs anyway, so uncomment below if you do
+#( cd $PKG/usr/doc/$PRGNAM-$VERSION/
+#  if [ -x /usr/share/texmf/bin/pdflatex ]; then
+#    pdflatex ifdhandler-3.tex >/dev/null
+#    pdflatex pcsc-lite.tex >/dev/null
+#    for oldfiles in *.aux *.tex *.toc *.log *.bib *.out ; 
+#      do rm -f $oldfiles ; 
+#    done
+#  fi
+#)
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/system/pcsc-lite/pcsc-lite.info b/system/pcsc-lite/pcsc-lite.info
new file mode 100644
index 0000000000000..7f1b7b8d8a077
--- /dev/null
+++ b/system/pcsc-lite/pcsc-lite.info
@@ -0,0 +1,8 @@
+PRGNAM="pcsc-lite"
+VERSION="1.4.99"
+HOMEPAGE="http://pcsclite.alioth.debian.org"
+DOWNLOAD="http://alioth.debian.org/frs/download.php/2257/pcsc-lite-1.4.99.tar.gz"
+MD5SUM="16c59b54edde9fa466c0e1f0eb86fd61"
+MAINTAINER="LukenShiro"
+EMAIL="lukenshiro@ngi.it"
+APPROVED="rworkman"
diff --git a/system/pcsc-lite/rc.pcscd b/system/pcsc-lite/rc.pcscd
new file mode 100644
index 0000000000000..480414de621b5
--- /dev/null
+++ b/system/pcsc-lite/rc.pcscd
@@ -0,0 +1,55 @@
+#!/bin/sh
+#
+# Start/Stop/Restart the PC/SC-lite smart card daemon.
+#
+# pcscd should be started after pcmcia and shut down
+# before it for smooth experience with PCMCIA readers.
+#
+
+PIDFILE=/var/run/pcscd.pid
+PCSCD_OPTS=""
+
+# Start
+pcscd_start() {
+  if [ -x /usr/sbin/pcscd ]; then
+    if [ -e "$PIDFILE" ]; then
+      echo "PC/SC-lite daemon already started!"
+    else
+      echo "Starting PC/SC-lite smart card daemon..."
+      /usr/sbin/update-reader.conf
+      /usr/sbin/pcscd $PCSCD_OPTS
+    fi
+  fi
+}
+
+# Stop
+pcscd_stop() {
+  echo "Stopping PC/SC-lite smart card daemon..."
+  if [ -e "$PIDFILE" ]; then
+      kill $(cat $PIDFILE)
+      rm -f $PIDFILE
+  fi
+  # Just in case:
+  killall pcscd 1>&2 >/dev/null
+}
+
+# Restart
+pcscd_restart() {
+  pcscd_stop
+  sleep 3
+  pcscd_start
+}
+
+case "$1" in
+'start')
+  pcscd_start
+  ;;
+'stop')
+  pcscd_stop
+  ;;
+'restart')
+  pcscd_restart
+  ;;
+*)
+  echo "usage $0 start|stop|restart"
+esac
diff --git a/system/pcsc-lite/slack-desc b/system/pcsc-lite/slack-desc
new file mode 100644
index 0000000000000..283099c5f798d
--- /dev/null
+++ b/system/pcsc-lite/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler---------------------------------------------------|
+pcsc-lite: pcsc-lite (Middleware to access a smart card using SCard API)
+pcsc-lite: 
+pcsc-lite: Middleware to access a smart card using SCard API (PC/SC)
+pcsc-lite: Its purpose is to provide a Windows(R) SCard interface in a 
+pcsc-lite: very small form factor for communicating to smart cards and 
+pcsc-lite: readers.
+pcsc-lite:  
+pcsc-lite: https://alioth.debian.org/projects/pcsclite/
+pcsc-lite: 
+pcsc-lite: 
+pcsc-lite: