system/kmscon: Added (KMS/DRM based System Console).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

7 files changed, 250 insertions, 0 deletions

diff --git a/system/kmscon/README b/system/kmscon/README
new file mode 100644
index 0000000000000..d54b82578bd12
--- /dev/null
+++ b/system/kmscon/README
@@ -0,0 +1,13 @@
+kmscon (KMS/DRM based System Console)
+
+kmscon is a system console for linux. It does not depend on any
+graphics-server on your system (like X.org), but instead provides a raw
+console layer that can be used independently. It can replace the linux
+kernel console entirely but was designed to work well side-by-side,
+too. Even though initially targeted at providing internationalization
+to the system-console, it has grown into a fully modularized console
+layer including features like multi-head support, internationalized
+font rendering, XKB-compatible keyboard handling, hardware-accelerated
+graphics access and more.
+
+For Slackware-specific notes on kmscon, see README.Slackware.
diff --git a/system/kmscon/README.Slackware b/system/kmscon/README.Slackware
new file mode 100644
index 0000000000000..a3e71f6d8070a
--- /dev/null
+++ b/system/kmscon/README.Slackware
@@ -0,0 +1,71 @@
+Using kmscon as a regular user
+------------------------------
+
+As shipped, kmscon only works for root. If you want to be able to run
+it as a normal user, you could make it setuid root (not recommended). A
+better solution:
+
+setcap cap_sys_tty_config,cap_sys_admin=ep
+
+See capabilities(7) and http://www.slackbuilds.org/caps/ for more info
+on capabilities.
+
+When running as a normal user, you probably also want to add "--login
+-- /bin/bash -i" on the kmscon command line (or the equivalent, in
+/etc/kmscon/kmscon.conf).
+
+Using kmscon as a console replacement
+-------------------------------------
+
+kmscon has much better support for fonts and Unicode/UTF-8 than the
+Linux framebuffer console. If you want to use kmscon for all your
+console logins, edit /etc/inittab and replace the /sbin/agetty lines
+(around line 50 on Slack 14.1) with:
+
+c1:12345:respawn:/usr/bin/kmscon --vt /dev/tty1
+c2:12345:respawn:/usr/bin/kmscon --vt /dev/tty2
+c3:12345:respawn:/usr/bin/kmscon --vt /dev/tty3
+c4:12345:respawn:/usr/bin/kmscon --vt /dev/tty4
+c5:12345:respawn:/usr/bin/kmscon --vt /dev/tty5
+c6:12345:respawn:/usr/bin/kmscon --vt /dev/tty6
+
+You might also want to edit /etc/kmscon/kmscon.conf and uncomment the
+line beginning with 'login=/sbin/agetty ...'.
+
+If you're in the habit of logging in as root, you'll want to edit
+/etc/securetty and uncomment the lines for pts/0 through pts/7. This
+is only needed for actual root logins (su and sudo will work fine
+without it).
+
+After making your edits, "init q" followed by "killall agetty" will fire
+up the new kmscon login prompts (alternatively, you can reboot).
+
+There's no need to use setcap if you're running kmscon from /etc/inittab,
+since it will always run as root.
+
+Misc
+----
+
+You'll almost certainly want to use a UTF-8 locale with kmscon. Normally
+this is set in /etc/profile.d/lang.sh (but you could also do it in your
+your ~/.bash_profile or such, if you like).
+
+When using kmscon, you'll have to use ctrl-alt-F# to switch consoles. Also
+try ctrl-plus and ctrl-minus (for zooming).
+
+You won't be able to run links in framebuffer mode (with "links -g
+-driver fb") from within a kmscon session.
+
+startx will work normally from kmscon.
+
+kmscon has *no* support for gpm, or the mouse in general. There's no way
+to select or paste text with the mouse, and no way to use the mouse in
+mouse-aware textmode applications like links.
+
+svgalib applications are highly unlikely to work from within kmscon.
+
+mplayer's framebuffer support (-vo fbdev or -vo fbdev2) doesn't work from
+within kmscon.
+
+Japanese man pages render beautifully with kmscon. Install man-db and
+man-pages-ja, and set LANG="ja_JP.UTF-8" in /etc/profile.d/lang.sh.
diff --git a/system/kmscon/doinst.sh b/system/kmscon/doinst.sh
new file mode 100644
index 0000000000000..d7468f28c9dd8
--- /dev/null
+++ b/system/kmscon/doinst.sh
@@ -0,0 +1,11 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    rm $NEW
+  fi
+}
+
+config etc/kmscon/kmscon.conf.new
diff --git a/system/kmscon/kmscon.SlackBuild b/system/kmscon/kmscon.SlackBuild
new file mode 100644
index 0000000000000..f3f0871941779
--- /dev/null
+++ b/system/kmscon/kmscon.SlackBuild
@@ -0,0 +1,86 @@
+#!/bin/sh
+
+# Slackware build script for kmscon
+
+# Written by B. Watson (yalhcru@gmail.com)
+
+# Licensed under the WTFPL. See http://www.wtfpl.net/txt/copying/ for details.
+
+PRGNAM=kmscon
+VERSION=${VERSION:-8}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.xz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --disable-static \
+  --enable-shared \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --build=$ARCH-slackware-linux
+
+make
+make install-strip DESTDIR=$PKG
+
+gzip $PKG/usr/man/man1/$PRGNAM.1
+
+mkdir -p $PKG/etc/$PRGNAM
+cat $CWD/$PRGNAM.conf > $PKG/etc/$PRGNAM/$PRGNAM.conf.new
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a COPYING NEWS README $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/kmscon/kmscon.conf b/system/kmscon/kmscon.conf
new file mode 100644
index 0000000000000..727f4280130bb
--- /dev/null
+++ b/system/kmscon/kmscon.conf
@@ -0,0 +1,40 @@
+# Config file for kmscon.
+# Any long option listed in "man kmscon" can be used here.
+
+# As shipped, all the options in this file are commented out.
+
+# Use agetty for logging in.
+# By default, kmscon spawns "/bin/login -p", which works fine but
+# isn't as nice (or as familiar) as using agetty.
+# If you plan to spawn kmscon from /etc/inittab, you probably want to
+# uncomment this.
+
+#login=/sbin/agetty 38400 -- - linux
+
+
+# Enable DRM 2D acceleration. 3D accel won't work unless you have
+# GL/ES support (which Slackware doesn't ship with, and isn't available
+# on SBo either).
+
+#drm
+
+
+# Font size, in points (not pixels). Don't set too large, you want
+# at least 80x25 character cells. 'echo $COLUMNS $LINES' should show
+# at least 80 columns and 25 lines.
+
+#font-size=15
+
+
+# Enable shortcut keys for multiple sessions on the same
+# virtual terminal.
+
+#session-control
+
+
+# Keyboard repeat delay is in milliseconds. Repeat rate is *also* in
+# milliseconds (unlike "xset r", which uses repeats-per-second).
+
+#xkb-repeat-delay=200
+#xkb-repeat-rate=12
+
diff --git a/system/kmscon/kmscon.info b/system/kmscon/kmscon.info
new file mode 100644
index 0000000000000..ffeac16026e0b
--- /dev/null
+++ b/system/kmscon/kmscon.info
@@ -0,0 +1,10 @@
+PRGNAM="kmscon"
+VERSION="8"
+HOMEPAGE="http://www.freedesktop.org/wiki/Software/kmscon/"
+DOWNLOAD="http://www.freedesktop.org/software/kmscon/releases/kmscon-8.tar.xz"
+MD5SUM="90d39c4ef53a11c53f27be4a7e9acee4"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="libtsm"
+MAINTAINER="B. Watson"
+EMAIL="yalhcru@gmail.com"
diff --git a/system/kmscon/slack-desc b/system/kmscon/slack-desc
new file mode 100644
index 0000000000000..fe41a104d25ec
--- /dev/null
+++ b/system/kmscon/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+kmscon: kmscon (KMS/DRM based System Console)
+kmscon:
+kmscon: kmscon is a system console for linux. It does not depend on any
+kmscon: graphics-server on your system (like X.org), but instead provides
+kmscon: a raw console layer that can be used independently. It can replace
+kmscon: the linux kernel console entirely but was designed to work well
+kmscon: side-by-side, too. Even though initially targeted at providing
+kmscon: internationalization to the system-console, it has grown into a fully
+kmscon: modularized console layer including features like multi-head support,
+kmscon: internationalized font rendering, XKB-compatible keyboard handling,
+kmscon: hardware-accelerated graphics access and more.