system/intel-microcode: Updated for version 20160607.

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

4 files changed, 34 insertions, 27 deletions

diff --git a/system/intel-microcode/README b/system/intel-microcode/README
index fef45f24afe12..9eb300f9c043f 100644
--- a/system/intel-microcode/README
+++ b/system/intel-microcode/README
@@ -7,25 +7,30 @@ approach to getting this microcode update is via a BIOS upgrade, Intel realizes
 that this can be an administrative hassle. The Linux operating system and VMware
 ESX products have a mechanism to update the microcode after booting.
 
-This SlackBuild repackages the official Intel microcode tarball, placing the
-microcode.dat file under /lib/firmware/microcode.dat, which can be later
-uploaded using microcode_ctl utility (available from SlackBuilds.org).
+This SlackBuild repackages the official Intel microcode archive.
+
+The "microcode.dat" file is placed under /lib/firmware/microcode.dat and can be
+later uploaded using microcode_ctl utility (available from SlackBuilds.org).
+This approach (microcode.dat + microcode_ctl) is kept for compatibility reasons
+and should be avoided whenever possible. * Use the solution described below. *
 
 If the iucode_tool (available from SlackBuilds.org) is installed on the system,
-this SlackBuild writes the microcodes with the file names expected by the Linux
-kernel firmware loader and places them under /lib/firmware/intel-ucode
-directory. In that case, the correct microcode is uploaded when the Intel
-microcode kernel's module is loaded.
-
-Please note that the method using the iucode_tool is preferred for multiple
-reasons, one being the deprecation of the kernel's interface used by the
-microcode_ctl utility.
-
-If you need to load the microcode early during the boot:
-1) read https://www.kernel.org/doc/Documentation/x86/early-microcode.txt
-2) read the manual for iucode_tool, especially about --write-earlyfw option
-3) make sure your kernel has the followings:
-  CONFIG_MICROCODE=y
-  CONFIG_MICROCODE_EARLY=y
-  CONFIG_MICROCODE_INTEL=y
-  CONFIG_MICROCODE_INTEL_EARLY=y
+this SlackBuild will:
+
+1) write the microcodes with the file names as expected by the Linux kernel
+   firmware loader and place them under /lib/firmware/intel-ucode directory.
+   The correct microcode is uploaded when the Intel microcode kernel's module
+   is loaded.
+
+2) write the microcodes to an early initramfs archive: /boot/intel-ucode.cpio
+   This archive should be prepended to the regular initramfs to allow
+   the kernel to update processor microcode very early during system boot.
+
+To get started with early microcode loading, please have a look at:
+1) https://www.kernel.org/doc/Documentation/x86/early-microcode.txt
+2) iucode_tool man page, especially about --write-earlyfw option.
+
+For example, on my system that uses syslinux, to load the microcode early
+during the boot process, the configuration file reads something like that:
+
+  INITRD /boot/intel-ucode.cpio,/boot/initrd-generic-4.4.x.gz
diff --git a/system/intel-microcode/intel-microcode.SlackBuild b/system/intel-microcode/intel-microcode.SlackBuild
index dfb9c2cd2a607..7fa2c2c984445 100644
--- a/system/intel-microcode/intel-microcode.SlackBuild
+++ b/system/intel-microcode/intel-microcode.SlackBuild
@@ -2,7 +2,7 @@
 
 # Slackware build script for intel-microcode
 
-# Copyright 2014 Andrzej Telszewski, Sabadell
+# Copyright 2016 Andrzej Telszewski, Banie
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,7 +24,7 @@
 
 PRGNAM=intel-microcode
 SRCNAM=microcode
-VERSION=${VERSION:-20151106}
+VERSION=${VERSION:-20160607}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 ARCH=noarch
@@ -52,7 +52,9 @@ cp -a microcode.dat $PKG/lib/firmware
 
 if [ -x /usr/sbin/iucode_tool ]; then
   mkdir -p $PKG/lib/firmware/intel-ucode
-  /usr/sbin/iucode_tool -v -L -K$PKG/lib/firmware/intel-ucode microcode.dat
+  /usr/sbin/iucode_tool -v --list-all -K$PKG/lib/firmware/intel-ucode microcode.dat
+  mkdir -p $PKG/boot
+  /usr/sbin/iucode_tool -v --write-earlyfw=$PKG/boot/intel-ucode.cpio microcode.dat
 fi
 
 mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
diff --git a/system/intel-microcode/intel-microcode.info b/system/intel-microcode/intel-microcode.info
index 2f17fd895402f..2e9f240d4487e 100644
--- a/system/intel-microcode/intel-microcode.info
+++ b/system/intel-microcode/intel-microcode.info
@@ -1,8 +1,8 @@
 PRGNAM="intel-microcode"
-VERSION="20151106"
+VERSION="20160607"
 HOMEPAGE="https://downloadcenter.intel.com/"
-DOWNLOAD="https://downloadmirror.intel.com/25512/eng/microcode-20151106.tgz"
-MD5SUM="288dc721fb39d71457ef2f5a49161f57"
+DOWNLOAD="https://downloadmirror.intel.com/26083/eng/microcode-20160607.tgz"
+MD5SUM="9be17f4afe5ee97e81659751e856af50"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 REQUIRES=""
diff --git a/system/intel-microcode/slack-desc b/system/intel-microcode/slack-desc
index c2460440f07c1..ec161789736a5 100644
--- a/system/intel-microcode/slack-desc
+++ b/system/intel-microcode/slack-desc
@@ -13,7 +13,7 @@ intel-microcode: for all Intel processors. Intel releases microcode updates to
 intel-microcode: correct processor behavior as documented in the respective processor
 intel-microcode: specification updates.
 intel-microcode:
+intel-microcode: Homepage: https://downloadcenter.intel.com/
 intel-microcode:
 intel-microcode:
-intel-microcode: Homepage: https://downloadcenter.intel.com/
 intel-microcode: