perl/perl-TermReadKey: Removed (Included in Slackware's Perl).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

4 files changed, 0 insertions, 140 deletions

diff --git a/perl/perl-TermReadKey/README b/perl/perl-TermReadKey/README
deleted file mode 100644
index 2a8706305d36..000000000000
--- a/perl/perl-TermReadKey/README
+++ /dev/null
@@ -1,9 +0,0 @@
-Term::ReadKey - A perl module for simple terminal control
-
-Term::ReadKey is a compiled perl module dedicated to providing simple
-control over terminal driver modes (cbreak, raw, cooked, etc.,) support
-for non-blocking reads, if the architecture allows, and some generalized
-handy functions for working with terminals. One of the main goals is to
-have the functions as portable as possible, so you can just plug in "use
-Term::ReadKey" on any architecture and have a good likelyhood of it
-working.
diff --git a/perl/perl-TermReadKey/perl-TermReadKey.SlackBuild b/perl/perl-TermReadKey/perl-TermReadKey.SlackBuild
deleted file mode 100644
index 5d27a9da73e7..000000000000
--- a/perl/perl-TermReadKey/perl-TermReadKey.SlackBuild
+++ /dev/null
@@ -1,102 +0,0 @@
-#!/bin/sh
-
-# Copyright (c) 2010-2015 LEVAI Daniel
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of the <organization> nor the
-#       names of its contributors may be used to endorse or promote products
-#       derived from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY
-# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
-# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Build script for perl-TermReadKey
-
-SRCNAM=TermReadKey
-PRGNAM=perl-$SRCNAM
-VERSION=${VERSION:-2.33}
-BUILD=${BUILD:-0}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ];then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -Rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -Rf $PRGNAM-$VERSION
-tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
-cd $SRCNAM-$VERSION
-chown -R root:root .
-find -L . \
- \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-perl Makefile.PL \
-  PREFIX=/usr \
-  INSTALLDIRS=vendor \
-  INSTALLVENDORMAN3DIR=/usr/man/man3
-make
-make test
-make install DESTDIR=$PKG
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-
-# Remove perllocal.pod and other special files that don't need to be installed
-find $PKG -name perllocal.pod -o -name ".packlist" -o -name "*.bs" | xargs rm -f || true
-
-# Remove empty directories
-find $PKG -depth -type d -empty -delete || true
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a README $PKG/usr/doc/$PRGNAM-$VERSION/
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/perl/perl-TermReadKey/perl-TermReadKey.info b/perl/perl-TermReadKey/perl-TermReadKey.info
deleted file mode 100644
index 10738cbd2740..000000000000
--- a/perl/perl-TermReadKey/perl-TermReadKey.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="perl-TermReadKey"
-VERSION="2.33"
-HOMEPAGE="https://metacpan.org/pod/Term::ReadKey"
-DOWNLOAD="https://cpan.metacpan.org/authors/id/J/JS/JSTOWE/TermReadKey-2.33.tar.gz"
-MD5SUM="1b60aa12b05b5c59d09061fa03087fdb"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES=""
-MAINTAINER="LEVAI Daniel"
-EMAIL="leva@ecentrum.hu"
diff --git a/perl/perl-TermReadKey/slack-desc b/perl/perl-TermReadKey/slack-desc
deleted file mode 100644
index 4a13180e9427..000000000000
--- a/perl/perl-TermReadKey/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.
-# Line up the first '|' above the ':' following the base package name, and
-# the '|' on the right side marks the last column you can put a character in.
-# You must make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':' except on otherwise blank lines.
-
-                |-----handy-ruler------------------------------------------------------|
-perl-TermReadKey: perl-TermReadKey (A perl module for simple terminal control)
-perl-TermReadKey:
-perl-TermReadKey: Term::ReadKey is a compiled perl module dedicated to providing simple
-perl-TermReadKey: control over terminal driver modes (cbreak, raw, cooked, etc.,)
-perl-TermReadKey: support for non-blocking reads, if the architecture allows, and some
-perl-TermReadKey: generalized handy functions for working with terminals.
-perl-TermReadKey:
-perl-TermReadKey: Homepage: http://search.cpan.org/~kjalb/TermReadKey-2.14/
-perl-TermReadKey:
-perl-TermReadKey:
-perl-TermReadKey: