perl/perl-Inline: Added (perl module)

Signed-off-by: dsomero <xgizzmo@slackbuilds.org>

4 files changed, 155 insertions, 0 deletions

diff --git a/perl/perl-Inline/README b/perl/perl-Inline/README
new file mode 100644
index 000000000000..63a364918eda
--- /dev/null
+++ b/perl/perl-Inline/README
@@ -0,0 +1,24 @@
+The Inline module allows you to put source code from other 
+programming languages directly "inline" in a Perl script 
+or module. The code is automatically compiled as needed, 
+and then loaded for immediate access from Perl.
+
+Inline saves you from the hassle of having to write and 
+compile your own glue code using facilities like XS or SWIG. 
+Simply type the code where you want it and run your Perl as 
+normal. All the hairy details are handled for you. The 
+compilation and installation of your code chunks all happen 
+transparently; all you will notice is the delay of 
+compilation on the first run.
+
+The Inline code only gets compiled the first time you run 
+it (or whenever it is modified) so you only take the 
+performance hit once. Code that is Inlined into distributed 
+modules (like on the CPAN) will get compiled when the module 
+is installed, so the end user will never notice the compilation 
+time.
+
+Best of all, it works the same on both Unix and Microsoft 
+Windows.
+
+NOTE: This also installs the submodule Inline::C.
diff --git a/perl/perl-Inline/perl-Inline.SlackBuild b/perl/perl-Inline/perl-Inline.SlackBuild
new file mode 100644
index 000000000000..388f5d1755f0
--- /dev/null
+++ b/perl/perl-Inline/perl-Inline.SlackBuild
@@ -0,0 +1,102 @@
+#!/bin/sh
+
+# Slackware build script for perl-Inline
+
+# Copyright 2012 Glenn Becker, Arlington, MA USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=perl-Inline
+VERSION=${VERSION:-0.51}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+SRCNAM=$(printf $PRGNAM | cut -d- -f2-)
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+PERL_MM_USE_DEFAULT=y perl Makefile.PL \
+  PREFIX=/usr \
+  INSTALLDIRS=vendor \
+  INSTALLVENDORMAN3DIR=/usr/man/man3
+make
+make test
+make install DESTDIR=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+find $PKG -name perllocal.pod -o -name ".packlist" -o -name "*.bs" | xargs rm -f || true
+
+find $PKG -depth -type d -empty -delete || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  Changes README ToDo \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/perl/perl-Inline/perl-Inline.info b/perl/perl-Inline/perl-Inline.info
new file mode 100644
index 000000000000..b8aa4b51fe24
--- /dev/null
+++ b/perl/perl-Inline/perl-Inline.info
@@ -0,0 +1,10 @@
+PRGNAM="perl-Inline"
+VERSION="0.51"
+HOMEPAGE="http://search.cpan.org/~sisyphus/Inline-0.51/"
+DOWNLOAD="http://search.cpan.org/CPAN/authors/id/S/SI/SISYPHUS/Inline-0.51.tar.gz"
+MD5SUM="9af4c4719d5315a691a2745097c53b07"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="perl-Parse-RecDescent perl-test-warn"
+MAINTAINER="Glenn Becker"
+EMAIL="burningc@sdf.org"
diff --git a/perl/perl-Inline/slack-desc b/perl/perl-Inline/slack-desc
new file mode 100644
index 000000000000..553ff5ba159c
--- /dev/null
+++ b/perl/perl-Inline/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+           |-----handy-ruler------------------------------------------------------|
+perl-Inline: perl-Inline (Perl module)
+perl-Inline:
+perl-Inline: The Inline module allows you to put source code from other
+perl-Inline: programming languages directly "inline" in a Perl script or module.
+perl-Inline: The code is automatically compiled as needed, and then loaded for
+perl-Inline: immediate access from Perl.
+perl-Inline:
+perl-Inline: This also installs the sub-module perl-Inline-C.
+perl-Inline:
+perl-Inline:
+perl-Inline: http://search.cpan.org/~sisyphus/Inline-0.51/