office/texlive: Updated for version 20110705.

Signed-off-by: Niels Horn <niels.horn@slackbuilds.org>

8 files changed, 180 insertions, 147 deletions

diff --git a/office/texlive/epstopdf/epstopdf.1 b/office/texlive/epstopdf/epstopdf.1
index 7243280bafb2b..ac57d1dc7d2a2 100644
--- a/office/texlive/epstopdf/epstopdf.1
+++ b/office/texlive/epstopdf/epstopdf.1
@@ -1,6 +1,5 @@
-.TH EPSTOPDF 1 "30 November 2009"
-.\" $Id: epstopdf.1 16245 2009-11-30 01:37:26Z karl $
-.\" man page originally by Jim Van Zandt
+.TH EPSTOPDF 1 "18 March 2010"
+.\" $Id: epstopdf.1 18160 2010-05-09 00:02:00Z karl $
 .SH NAME
 epstopdf, repstopdf \- convert an EPS file to PDF
 .SH SYNOPSIS
@@ -16,9 +15,10 @@ result is piped to Ghostscript and a PDF version written.
 If the bounding box is not right, of course, there are problems.
 .SH OPTIONS
 .IP "\fB--outfile\fP=\fIfile\fP"
-write result to \fIfile\fP; the default is to construct the output file
-name by replacing any extension in the input file with \fI.pdf\fP.  If
-\fB--nogs\fP or \fB--filter\fP is specified, write to standard output.
+write result to \fIfile\fP.  If this option is not given, and
+\fB--nogs\fP or \fB--filter\fP is specified, write to standard output;
+otherwise, the default is to construct the output file name by replacing
+any extension in the input file with \fI.pdf\fP.
 .IP "\fB--\fP[\fBno\fP]\fBcompress\fP"
 use compression (default: on).
 .IP "\fB--\fP[\fBno\fP]\fBdebug\fP"
@@ -28,9 +28,12 @@ embed fonts (default: on).
 .IP "\fB--\fP[\fBno\fP]\fBexact\fP"
 scan ExactBoundingBox (default: off).
 .IP "\fB--\fP[\fBno\fP]\fBfilter\fP"
-read standard input (default: off).
+read standard input and (unless \fB--outfile\fP is given) write standard
+output(default: off).
 .IP "\fB--\fP[\fBno\fP]\fBgs\fP"
-run ghostscript (default: on).
+run Ghostscript (default: on).  With \fB--nogs\fP, output (to standard
+output by default) the PostScript that would normally be converted; that
+is, the input PostScript as modified by \fBepstopdf\fP.
 .IP "\fB--\fP[\fBno\fP]\fBhires\fP"
 scan HiresBoundingBox (default: off).
 .IP "\fB--gscmd\fP=\fIval\fP"
@@ -41,42 +44,45 @@ set image resolution (default: [use gs default])
 set AutoRotatePages (default: None); recognized \fIval\fP choices:
 None, All, PageByPage.  For EPS files, PageByPage is equivalent to All.
 .IP "\fB--restricted\fP=\fIval\fP"
-turn on restricted mode (default: [on for resptopdf, else off]);
-this restricts the values accepted by \fB--gscmd\fP and impose restrictions
-on the output file name similar to web2c's openout_any=p.
+turn on restricted mode (default: [on for repstopdf, else off]);
+this forbids the use of \fB--gscmd\fP and imposes restrictions on the input and
+output file names according to the values of openin_any and openout_any (see
+the Web2c manual, http://tug.org/web2c).
 .IP "\fB--help\fP
 display help message and exit
 .IP "\fB--version\fP
 display version information and exit
 .SH EXAMPLES
-Examples for producing "test.pdf":
+Examples which produce "test.pdf":
 .nf
 epstopdf test.eps
 produce postscript | epstopdf --filter >test.pdf
 produce postscript | epstopdf -f -d -o=test.pdf
-
 .fi
 Example: look for HiresBoundingBox and produce corrected PostScript:
 .nf
 epstopdf -d --nogs --hires test.ps >testcorr.ps 
 .fi
 .SH BUGS
-The case of "%%BoundingBox: (atend)"
-when input is not seekable (e.g., from a pipe) is not supported.
+The case of "%%BoundingBox: (atend)" when input is not seekable (e.g.,
+from a pipe) is not supported.
 .PP
-When reporting bugs, please include an input file and command line
-options so the problem can be reproduced.  Report bugs in
-the program or this man page to tex-k@tug.org.
+Report bugs in the program or this man page to tex-k@tug.org.  When
+reporting bugs, please include an input file and the command line
+options specified, so the problem can be reproduced.
 .SH SEE ALSO
 \fBgs\fP(1),
 \fBpdfcrop\fP(1).
+.PP
+The epstopdf LaTeX package, part of the oberdiek bundle, which automates
+running this script on the fly under TeX: http://ctan.org/pkg/epstopdf-pkg.
 .SH AUTHOR
 The script was originally written by Sebastian Rahtz, for Elsevier
-Science, with subsequent contributions from Gerben Wierda and many
-others.  Currently maintained by Karl Berry.
+Science, with subsequent contributions from Thomas Esser, Gerben Wierda
+and many others.  Currently maintained by Karl Berry.
 .PP
 Man page originally written by Jim Van Zandt.
 .PP
-epstopdf home page: http://tug.org/epstopdf/
+epstopdf home page: http://tug.org/epstopdf.
 .PP
 You may freely use, modify and/or distribute this file.
diff --git a/office/texlive/epstopdf/epstopdf.man1.pdf b/office/texlive/epstopdf/epstopdf.man1.pdf
new file mode 100644
index 0000000000000..41535a80bcdbb
--- /dev/null
+++ b/office/texlive/epstopdf/epstopdf.man1.pdf
diff --git a/office/texlive/epstopdf/epstopdf.pdf b/office/texlive/epstopdf/epstopdf.pdf
deleted file mode 100644
index 9afe8d20713f8..0000000000000
--- a/office/texlive/epstopdf/epstopdf.pdf
+++ /dev/null
diff --git a/office/texlive/epstopdf/epstopdf.pl b/office/texlive/epstopdf/epstopdf.pl
index a312a9b7f9061..9299839c41e2c 100644
--- a/office/texlive/epstopdf/epstopdf.pl
+++ b/office/texlive/epstopdf/epstopdf.pl
@@ -2,7 +2,7 @@ eval '(exit $?0)' && eval 'exec perl -S $0 ${1+"$@"}' && eval 'exec perl -S $0 $
   if 0;
 use strict;
 
-# $Id: epstopdf.pl 16244 2009-11-30 01:36:08Z karl $
+# $Id: epstopdf.pl 18319 2010-05-17 16:34:21Z karl $
 # (Copyright lines below.)
 #
 # Redistribution and use in source and binary forms, with or without
@@ -39,14 +39,30 @@ use strict;
 #   c) the result is piped to Ghostscript and a PDF version written.
 #
 # It needs a Level 2 PS interpreter.
-# If the bounding box is not right, of course, there will be problems.
+# If the input bounding box is not right, of course there will be problems.
 #
-# One thing not allowed for is the case of
+# One thing not allowed for: the case of
 # "%%BoundingBox: (atend)" when input is not seekable (e.g., from a pipe),
-# which is more complicated.
 #
 # emacs-page
 # History
+#  2010/05/09 v2.16 (Karl Berry)
+#    * make --nogs dump edited PostScript to stdout by default
+#      (report from Reinhard Kotucha).
+#  2010/03/19 v2.15 (Karl Berry)
+#    * let --outfile override --filter again.
+#    * recognize MSWin64 as well as MSWin32, just in case.
+#  2010/03/08 v2.14 (Manuel P\'egouri\'e-Gonnard)
+#    * In restricted mode, forbid --gscmd (all platforms) and call GS with full
+#    path relative to self location (Windows).
+#  2010/02/26 v2.13 (Karl Berry)
+#    * New release.
+#  2010/02/23       (Manuel P\'egouri\'e-Gonnard)
+#    * Use kpsewhich for filename validation in restricted mode, both input and
+#    output. Requires kpathsea 5.1.0 (TL2010), rejects the name with earlier
+#    versions of kpsewhich.
+#    * Call external programs with full path on win32 in order to avoid obvious
+#    attacks with rogue versions of these programs in the current directory.
 #  2009/11/27 v2.12 (Karl Berry)
 #    * Make --filter work again
 #  2009/11/25       (Manuel P\'egouri\'e-Gonnard)
@@ -133,9 +149,9 @@ use strict;
 
 ### program identification
 my $program = "epstopdf";
-my $ident = '($Id: epstopdf.pl 16244 2009-11-30 01:36:08Z karl $) 2.12';
+my $ident = '($Id: epstopdf.pl 18319 2010-05-17 16:34:21Z karl $) 2.16';
 my $copyright = <<END_COPYRIGHT ;
-Copyright 2009 Karl Berry et al.
+Copyright 2009-2010 Karl Berry et al.
 Copyright 2002-2009 Gerben Wierda et al.
 Copyright 1998-2001 Sebastian Rahtz et al.
 License RBSD: Revised BSD <http://www.xfree86.org/3.3.6/COPYRIGHT2.html#5>
@@ -144,26 +160,28 @@ There is NO WARRANTY, to the extent permitted by law.
 END_COPYRIGHT
 my $title = "$program $ident\n";
 
+my $on_windows = $^O =~ /^MSWin/;
+my $on_windows_or_cygwin = $on_windows || $^O eq "cygwin";
+
 ### ghostscript command name
-my $GS = "gs";
-$GS = "gswin32c" if $^O eq 'MSWin32';
+my $GS = $on_windows ? "gswin32c" : "gs";
 
 ### restricted mode
 my $restricted = 0;
 $restricted = 1 if $0 =~ /repstopdf/;
 
 ### options
-$::opt_outfile="";
-$::opt_compress=1;
-$::opt_debug=0;
-$::opt_embed=1;
-$::opt_exact=0;
-$::opt_filter=0;
-$::opt_gs=1;
-$::opt_hires=0;
-$::opt_gscmd="";
-$::opt_res=0;
-$::opt_autorotate="None";
+$::opt_autorotate = "None";
+$::opt_compress = 1;
+$::opt_debug = 0;
+$::opt_embed = 1;
+$::opt_exact = 0;
+$::opt_filter = 0;
+$::opt_gs = 1;
+$::opt_gscmd = "";
+$::opt_hires = 0;
+$::opt_outfile = "";
+$::opt_res = 0;
 
 ### usage
 my @bool = ("false", "true");
@@ -193,7 +211,7 @@ Options:
                       For EPS files, PageByPage is equivalent to All
   --restricted       use restricted mode   (default: $bool[$restricted])
 
-Examples for producing 'test.pdf':
+Examples producing test.pdf:
   * $program test.eps
   * produce postscript | $program --filter >test.pdf
   * produce postscript | $program -f -d -o=test.pdf
@@ -211,40 +229,57 @@ END_OF_USAGE
 ### process options
 use Getopt::Long;
 GetOptions (
-  "help",
-  "version",
-  "outfile=s", 		# \ref{openout_any}
+  "autorotate=s",	# \ref{val_autorotate}
   "compress!",
   "debug!",
   "embed!",
   "exact!",
   "filter!",
   "gs!",
-  "hires!",
   "gscmd=s", 		# \ref{val_gscmd}
-  "res=i",		# validated by Getopt ('i' specifier)
-  "autorotate=s",	# \ref{val_autorotate}
+  "help",
+  "hires!",
+  "outfile=s", 		# \ref{openout_any}
+  "res=i",		# validated by getopt ('i' specifier)
   "restricted",
+  "version",
 ) or die $usage;
 
 ### help functions
-sub debug {
-  print STDERR "* @_\n" if $::opt_debug;
-}
-sub warning {
-  print STDERR "==> Warning: @_\n";
-}
-sub error {
-  die "$title!!! Error: @_\n";
-}
-sub errorUsage {
-  die "$usage\n!!! Error: @_\n";
-}
+sub debug      { print STDERR "* @_\n" if $::opt_debug; }
+sub warning    { print STDERR "==> Warning: @_\n"; }
+sub error      { die "$title!!! Error: @_\n"; }
+sub errorUsage { die "Error: @_ (try --help for more information)\n"; }
 
 ### restricted option
 $restricted = 1 if $::opt_restricted;
 debug "Restricted mode activated" if $restricted;
 
+### safer external commands for Windows in restricted mode
+my $kpsewhich = 'kpsewhich';
+if ($restricted && $on_windows) {
+  use File::Basename;
+  my $mydirname = dirname $0;
+  # $mydirname is the location of the Perl script
+  $kpsewhich = "$mydirname/../../../bin/win32/$kpsewhich";
+  $GS = "$mydirname/../../../tlpkg/tlgs/bin/$GS";
+}
+debug "kpsewhich command: $kpsewhich";
+
+### check if a name is "safe" according to kpse's open(in|out)_any
+# return true if name is ok, false otherwise
+sub safe_name
+{
+  my ($mode, $name) = @_;
+  my $option = "";
+  $option = '-safe-in-name'  if $mode eq 'in';
+  $option = '-safe-out-name' if $mode eq 'out';
+  error "Unknown check mode in safe_name(): $mode" unless $option;
+  my @args = ($kpsewhich, '-progname', 'repstopdf', $option, $name);
+  my $bad = system {$args[0]} @args;
+  return ! $bad;
+}
+
 ### help, version options.
 if ($::opt_help) {
   print $usage;
@@ -257,29 +292,28 @@ if ($::opt_version) {
   exit (0);
 }
 
-### get input filename
+### get input filename (\ref{openin_any} for validation)
 my $InputFilename = "";
 if ($::opt_filter) {
   @ARGV == 0 or
-    die errorUsage "Input file cannot be used with filter option";
+    errorUsage "Input file cannot be used with filter option";
   debug "Filtering: will read standard input";
 } else {
-  @ARGV > 0 or die errorUsage "Input filename missing";
-  @ARGV < 2 or die errorUsage "Unknown option or too many input files";
+  @ARGV > 0 or errorUsage "Input filename missing";
+  @ARGV < 2 or errorUsage "Unknown option or too many input files";
   $InputFilename = $ARGV[0];
   #-r $InputFilename or error "\"$InputFilename\" not readable";
   debug "Input filename:", $InputFilename;
 }
 
+### emacs-page
 ### option gscmd
 if ($::opt_gscmd) {
-  debug "Switching from $GS to $::opt_gscmd";
-  $GS = $::opt_gscmd;
-  # validate GS \label{val_gscmd}
-  if ($restricted) {
-    $GS =~ /^(gs|mgs|gswin32c|gs386|gsos2)\z/
-      or $GS =~ /^gs[\-_]?(\d|\d[\.-_]?\d\d)c?\z/
-      or die error "Value of gscmd '$GS' not allowed in restricted mode.";
+  if ($restricted) { # \label{val_gscmd}
+    error "Option forbidden in restricted mode: --gscmd";
+  } else {
+    debug "Switching from $GS to $::opt_gscmd";
+    $GS = $::opt_gscmd;
   }
 }
 
@@ -289,24 +323,24 @@ push @GS, qw(-q -dNOPAUSE -dSAFER -sDEVICE=pdfwrite);
 
 ### option outfile
 my $OutputFilename = $::opt_outfile;
-if ($OutputFilename eq "") {
+if (! $OutputFilename) {
   if ($::opt_gs) {
-    $OutputFilename = $InputFilename;
-    if (!$::opt_filter) {
-      my $ds = ($^O eq "MSWin32" || $^O eq "cygwin") ? '\\/' : '/';
+    if ($::opt_filter) {
+      debug "Filtering: will write standard output";
+      $OutputFilename = "-";
+    } else {
+      # Ghostscript, no filter: replace input extension with .pdf.
+      $OutputFilename = $InputFilename;
+      my $ds = $on_windows_or_cygwin ? '\\/' : '/';
       $OutputFilename =~ s/\.[^\.$ds]*$//;
       $OutputFilename .= ".pdf";
     }
   } else {
-    $OutputFilename = "-"; # no ghostscript, write to standard output
+    debug "No Ghostscript: will write standard output";
+    $OutputFilename = "-";
   }
 }
-if ($::opt_filter) {
-  debug "Filtering: will write standard output";
-  $OutputFilename = "-";
-} else {
-  debug "Output filename:", $OutputFilename;
-}
+debug "Output filename:", $OutputFilename;
 push @GS, "-sOutputFile=$OutputFilename";
 
 ### options compress, embed, res, autorotate
@@ -321,7 +355,7 @@ $rotmsg = $::opt_autorotate ? $::opt_autorotate : "[use gs default]";
 error "Invalid value for autorotate: '$::opt_autorotate' "
   . "(use 'All', 'None' or 'PageByPage')."
   if ($::opt_autorotate and
-    not $::opt_autorotate =~ /^(None|All|PageByPage)\z/);
+    not $::opt_autorotate =~ /^(None|All|PageByPage)$/);
 
 ### option BoundingBox types
 my $BBName = "%%BoundingBox:";
@@ -331,31 +365,15 @@ $BBName = "%%HiResBoundingBox:" if $::opt_hires;
 $BBName = "%%ExactBoundingBox:" if $::opt_exact;
 debug "BoundingBox comment:", $BBName;
 
+### validate input file name in restricted mode \label{openin_any}
+if ($restricted and not $::opt_filter
+    and not safe_name('in', $InputFilename)) {
+  error "Input filename '$InputFilename' not allowed in restricted mode.";
+}
+
 ### validate output file name in restricted mode \label{openout_any}
-use File::Spec::Functions qw(splitpath file_name_is_absolute);
-if ($restricted) {
-  # use the equivalent of openout_any = p
-  # (see opennameok() web2c/lib/texmfmp.c)
-  # Well, for now, be even more paranoid: don't allow absolute path at all
-  my $ok = 1;
-  # disallow opening dot-files on Unix
-  unless ($^O eq "MSWin32") {
-    my ($drive, $path, $basename) = splitpath($OutputFilename);
-    $ok = 0 if $basename =~ /^\./;
-  }
-  # disallow absolute path
-  $ok = 0 if file_name_is_absolute($OutputFilename);
-  # disallow colon on Windows. It could be used either after a drive
-  # (like "a:dir\file") or for an alternate data stream (like
-  # "file:ads").
-  if ($^O eq "MSWin32" || $^O eq "cygwin") {
-    $ok = 0 if $OutputFilename =~ /:/;
-  }
-  # disallow going to parent directory
-  my $ds = ($^O eq "MSWin32" || $^O eq "cygwin") ? qr([\\/]) : qr(/);
-  $ok = 0 if $OutputFilename =~ /^\.\.$ds|$ds\.\.$ds/;
-  # we passed all tests
-  die error "Output filename '$OutputFilename' not allowed in restricted mode." unless $ok;
+if ($restricted and not safe_name('out', $OutputFilename)) {
+  error "Output filename '$OutputFilename' not allowed in restricted mode.";
 }
 
 ### option gs
@@ -382,7 +400,7 @@ my $tmp_filename; # temporary file for windows
 my $OUT; # filehandle for output (GS pipe or temporary file)
 use File::Temp 'tempfile';
 if ($::opt_gs) {
-  unless ($^O eq 'MSWin32' || $^O eq 'cygwin') { # list piped open works
+  if (! $on_windows_or_cygwin) { # list piped open works
     push @GS, qw(- -c quit);
     debug "Ghostscript pipe:", join(' ', @GS);
     open($OUT, '|-', @GS) or error "Cannot open Ghostscript for piped input";
@@ -393,8 +411,14 @@ if ($::opt_gs) {
   $outname = $GS;
 }
 else {
-  open($OUT, '>', $OutputFilename) or error "Cannot write \"$OutputFilename\"";
-  $outname = $OutputFilename;
+  debug "No Ghostscript: opening $OutputFilename";
+  if ($OutputFilename eq "-") {
+    $OUT = *STDOUT;
+  } else {
+    open($OUT, '>', $OutputFilename)
+    || error ("Cannot write \"$OutputFilename\": $!");
+    $outname = $OutputFilename;
+  }
 }
 binmode $OUT;
 
@@ -584,3 +608,5 @@ if ($? & 127) {
 
 warning "BoundingBox not found" unless $BBCorrected;
 debug "Done.";
+
+# vim: ts=8 sw=2 expandtab:
diff --git a/office/texlive/patches/source-fixup_texmf-local_tree_in_texmf_cnf.diff b/office/texlive/patches/source-fixup_texmf-local_tree_in_texmf_cnf.diff
index 41c5b89fd215a..dd1de3efe2752 100644
--- a/office/texlive/patches/source-fixup_texmf-local_tree_in_texmf_cnf.diff
+++ b/office/texlive/patches/source-fixup_texmf-local_tree_in_texmf_cnf.diff
@@ -1,12 +1,12 @@
-diff -Nur texlive-20100722-source.orig//texk/kpathsea/texmf.cnf texlive-20100722-source/texk/kpathsea/texmf.cnf
---- texlive-20100722-source.orig//texk/kpathsea/texmf.cnf	2010-05-30 16:52:39.000000000 -0500
-+++ texlive-20100722-source/texk/kpathsea/texmf.cnf	2011-01-24 14:38:46.317199461 -0600
-@@ -61,7 +61,7 @@
- % A place for local additions to a "standard" texmf tree.
- % This tree is not used for local configuration maintained by
- % texconfig, it uses TEXMFCONFIG below.
--TEXMFLOCAL = $SELFAUTOPARENT/../texmf-local
-+TEXMFLOCAL = $SELFAUTOPARENT/texmf-local
+diff -Nur texlive-20110705-source.orig//texk/kpathsea/texmf.cnf texlive-20110705-source/texk/kpathsea/texmf.cnf
+--- texlive-20110705-source.orig//texk/kpathsea/texmf.cnf	2011-06-18 17:10:46.000000000 -0500
++++ texlive-20110705-source/texk/kpathsea/texmf.cnf	2011-07-22 21:30:42.459806437 -0500
+@@ -59,7 +59,7 @@
+ TEXMFDIST = $TEXMFROOT/texmf-dist
  
- % TEXMFSYSVAR, where texconfig-sys stores variable runtime data.
- % With teTeX-3.0 or later, this must be set.
+ % Local additions to the distribution trees.
+-TEXMFLOCAL = $TEXMFROOT/../texmf-local
++TEXMFLOCAL = $TEXMFROOT/texmf-local
+ 
+ % TEXMFSYSVAR, where *-sys store cached runtime data.
+ TEXMFSYSVAR = $TEXMFROOT/texmf-var
diff --git a/office/texlive/patches/texmf-fixup_texmf-local_tree_in_texmf_cnf.diff b/office/texlive/patches/texmf-fixup_texmf-local_tree_in_texmf_cnf.diff
index fa064e765195a..5c265e05634b2 100644
--- a/office/texlive/patches/texmf-fixup_texmf-local_tree_in_texmf_cnf.diff
+++ b/office/texlive/patches/texmf-fixup_texmf-local_tree_in_texmf_cnf.diff
@@ -1,11 +1,12 @@
---- texlive-20100722-texmf.orig/texmf/web2c/texmf.cnf	2011-01-24 18:04:35.406411913 -0600
-+++ texlive-20100722-texmf/texmf/web2c/texmf.cnf	2011-01-24 18:04:45.709266445 -0600
-@@ -61,7 +61,7 @@
- % A place for local additions to a "standard" texmf tree.
- % This tree is not used for local configuration maintained by
- % texconfig, it uses TEXMFCONFIG below.
--TEXMFLOCAL = $SELFAUTOPARENT/../texmf-local
-+TEXMFLOCAL = $SELFAUTOPARENT/texmf-local
+diff -Nur texlive-20110705-texmf.orig//texmf/web2c/texmf.cnf texlive-20110705-texmf/texmf/web2c/texmf.cnf
+--- texlive-20110705-texmf.orig//texmf/web2c/texmf.cnf	2011-06-18 17:10:46.000000000 -0500
++++ texlive-20110705-texmf/texmf/web2c/texmf.cnf	2011-07-22 21:42:11.710930405 -0500
+@@ -59,7 +59,7 @@
+ TEXMFDIST = $TEXMFROOT/texmf-dist
  
- % TEXMFSYSVAR, where texconfig-sys stores variable runtime data.
- % With teTeX-3.0 or later, this must be set.
+ % Local additions to the distribution trees.
+-TEXMFLOCAL = $TEXMFROOT/../texmf-local
++TEXMFLOCAL = $TEXMFROOT/texmf-local
+ 
+ % TEXMFSYSVAR, where *-sys store cached runtime data.
+ TEXMFSYSVAR = $TEXMFROOT/texmf-var
diff --git a/office/texlive/texlive.SlackBuild b/office/texlive/texlive.SlackBuild
index 822de12cf7b1a..0a803f7304ff4 100644
--- a/office/texlive/texlive.SlackBuild
+++ b/office/texlive/texlive.SlackBuild
@@ -26,15 +26,15 @@
 # URL: ftp://tug.org/historic/systems/texlive/2010/
 
 PRGNAM=texlive
-VERSION=20100722
-BUILD=${BUILD:-3}
+VERSION=20110705
+BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
 SOURCE_VERS=$VERSION
 TEXMF_VERS=$VERSION
-EXTRA_VERS=20100826
+EXTRA_VERS=$VERSION
 
-TEXI2HTML=1.82		# texi2html version - http://www.nongnu.org/texi2html/
+TEXI2HTML=5.0		# texi2html version - http://www.nongnu.org/texi2html/
 
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
@@ -93,7 +93,7 @@ patch -p1 < $CWD/patches/source-fixup_texmf-local_tree_in_texmf_cnf.diff
 TL_BUILD_ENV="CFLAGS=\"$SLKCFLAGS\" CXXFLAGS=\"$SLKCFLAGS\"" \
 TL_CONFIGURE_ARGS="\
   --enable-multiplatform \
-  --with-tex-banner='TeX Live 2010/Slackware (unofficial)' \
+  --with-tex-banner='TeX Live 2011/Slackware (SBo)' \
   --disable-native-texlive-build \
   --disable-static \
   --enable-ipc \
@@ -182,14 +182,14 @@ make
 make install DESTDIR=$PKG
 mkdir -p $PKG/usr/doc/texlive-$VERSION/texi2html-$TEXI2HTML
 cp -a \
-  AUTHORS COPYING NEWS README TODO \
+  AUTHORS COPYING ChangeLog NEWS README TODO \
     $PKG/usr/doc/texlive-$VERSION/texi2html-$TEXI2HTML
 
 # Now add epstopdf
 mkdir -p $PKG/usr/doc/texlive-$VERSION/eps2pdf
 cat $CWD/epstopdf/epstopdf.pl > $PKG/usr/share/texmf/bin/epstopdf
 cat $CWD/epstopdf/epstopdf.1 > $PKG/usr/share/texmf/doc/man/man1/epstopdf.1
-cat $CWD/epstopdf/epstopdf.pdf > $PKG/usr/doc/texlive-$VERSION/eps2pdf/epstopdf.pdf
+cat $CWD/epstopdf/epstopdf.man1.pdf > $PKG/usr/doc/texlive-$VERSION/eps2pdf/epstopdf.man1.pdf
 cat $CWD/epstopdf/README > $PKG/usr/doc/texlive-$VERSION/eps2pdf/README
 chmod 0755 $PKG/usr/share/texmf/bin/epstopdf
 
diff --git a/office/texlive/texlive.info b/office/texlive/texlive.info
index 28311cc8c8df7..4a70900cd4f74 100644
--- a/office/texlive/texlive.info
+++ b/office/texlive/texlive.info
@@ -1,16 +1,16 @@
 PRGNAM="texlive"
-VERSION="20100722"
+VERSION="20110705"
 HOMEPAGE="http://tug.org/texlive/"
-DOWNLOAD="ftp://tug.org/historic/systems/texlive/2010/texlive-20100722-source.tar.xz \
-          ftp://tug.org/historic/systems/texlive/2010/texlive-20100722-texmf.tar.xz \
-          ftp://tug.org/historic/systems/texlive/2010/texlive-20100826-extra.tar.xz \
-          http://savannah.nongnu.org/download/texi2html/texi2html-1.82.tar.bz2"
-MD5SUM="156fa34c56acb901fdc687b8d9860f1f \
-        12dec3a323c4eb75b98a3160c62dc865 \
-        d268c292605117d9de895d21db3a2e86 \
-        a8a9193c0ac1bec2f3ca7be40a5a82eb"
+DOWNLOAD="ftp://tug.org/historic/systems/texlive/2011/texlive-20110705-source.tar.xz \
+          ftp://tug.org/historic/systems/texlive/2011/texlive-20110705-texmf.tar.xz \
+          ftp://tug.org/historic/systems/texlive/2011/texlive-20110705-extra.tar.xz \
+          http://download.savannah.gnu.org/releases/texi2html/texi2html-5.0.tar.bz2"
+MD5SUM="968d238949e8a34a1fd74c374ddfe6f1 \
+        ed7b558be35adf00a6c2e69609cd679a \
+        6b554b0534f58ad7e7f0b0dc6d072a2c \
+        f15ac876fcdc8be865b16535f480aa54"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 MAINTAINER="Robby Workman"
 EMAIL="rw@rlworkman.net"
-APPROVED="dsomero"
+APPROVED="Niels Horn"