network/ipxnet: Added (tunnel IPX over TCP/IP).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

8 files changed, 322 insertions, 0 deletions

diff --git a/network/ipxnet/README b/network/ipxnet/README
new file mode 100644
index 0000000000000..1b7786bbf587c
--- /dev/null
+++ b/network/ipxnet/README
@@ -0,0 +1,47 @@
+ipxnet (tunnel IPX over TCP/IP)
+
+Host a standalone IPX network over tcp for old DOS games running in
+dosbox.
+
+For more information, see "https://www.dosbox.com/wiki/connectivity". Note
+that the "Start IPX server" step is unnecessary when using this build
+of ipxnet.
+
+There are two use cases for ipxnet, with two separate executables:
+
+- Users start the daemon as needed, and kill it when they're done. For
+  this, there's no need for an init script. The executable for users is
+  called "ipxnet". It logs to standard output only, and doesn't detach
+  from the terminal. The officially assigned UDP port number can't be
+  used, as it's port 213 and normal users can't bind to ports below 1024.
+
+- Persistent daemon, that starts at boot and runs until shutdown. The
+  executable for this is "ipxnet-system", but you don't normally run it
+  directly. Instead, there's an init script. To make ipxnet start at boot:
+
+  # chmod 755 /etc/rc.d/rc.ipxnet
+
+...then edit /etc/rc.d/rc.local and add:
+
+  if [ -x /etc/rc.d/rc.ipxnet ]; then
+     /etc/rc.d/rc.ipxnet start
+  fi
+
+The default UDP port for ipxnet-system is 213. To change this, edit
+/etc/rc.d/rc.ipxnet.conf, then run "/etc/rc.d/rc.ipxnet restart" if the
+daemon is already running.
+
+The ipxnet-system log file is /var/log/ipxnet.log. It will not be
+overwritten when the package is reinstalled.
+
+The ipxnet-system binary is installed setuid nobody and setgid nogroup
+by default. If you want to change this, set IPXUSER and/or IPXGROUP
+in the SlackBuild's environment. It's a bad idea to run this as root,
+since it hasn't been audited for security. If you're really paranoid,
+you probably will want to create a dedicated ipxnet user and group.
+
+ipxnet-system also has the cap_net_bind_service capability set, meaning
+it must be installed on a filesystem that supports capabilities (this
+includes but is not limited to ext2/3/4 and reiserfs v3). This is required
+for it to run as "nobody" yet be able to bind to low-numbered ports,
+and is a much safer alternative to running it as root.
diff --git a/network/ipxnet/doinst.sh b/network/ipxnet/doinst.sh
new file mode 100644
index 0000000000000..5af0d51745ef4
--- /dev/null
+++ b/network/ipxnet/doinst.sh
@@ -0,0 +1,32 @@
+
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    rm $NEW
+  fi
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.ipxnet.new
+config etc/rc.d/rc.ipxnet.conf.new
+
+# create log if missing, make sure ownership is correct. log
+# will not be removed on package removal.
+touch var/log/ipxnet.log
+chown @IPXUSER@:@IPXGROUP@ var/log/ipxnet.log
+
+# 14.2 uses tar-1.15 for makepkg, can't handle capabilities, so:
+[ -e /sbin/setcap] && /sbin/setcap cap_net_bind_service=epi usr/sbin/ipxnet-system
diff --git a/network/ipxnet/git2tarxz.sh b/network/ipxnet/git2tarxz.sh
new file mode 100644
index 0000000000000..43de757147d65
--- /dev/null
+++ b/network/ipxnet/git2tarxz.sh
@@ -0,0 +1,42 @@
+#!/bin/sh
+
+# Create source tarball from git repo, with generated version
+# number. We don't include the git history in the tarball.
+
+# Note that this script doesn't need to be run as root. It does
+# need to be able to write to the current directory it's run from.
+
+PRGNAM=ipxnet
+CLONE_URL=https://github.com/intangir/$PRGNAM.git
+
+set -e
+
+GITDIR=$( mktemp -dt $PRGNAM.git.XXXXXX )
+rm -rf $GITDIR
+git clone $CLONE_URL $GITDIR
+
+CWD="$( pwd )"
+cd $GITDIR
+
+VERSION=$( git log --date=format:%Y%m%d --pretty=format:%cd.%h -n1 )
+
+rm -rf .git
+find . -name .gitignore -print0 | xargs -0 rm -f
+
+cd "$CWD"
+rm -rf $PRGNAM-$VERSION $PRGNAM-$VERSION.tar.xz
+mv $GITDIR $PRGNAM-$VERSION
+tar cvfJ $PRGNAM-$VERSION.tar.xz $PRGNAM-$VERSION
+
+cat <<EOF
+
+Archive created: $PRGNAM-$VERSION.tar.xz
+
+Update $PRGNAM.info with:
+
+VERSION="$VERSION"
+DOWNLOAD="http://urchlay.naptime.net/~urchlay/src/$PRGNAM-$VERSION.tar.xz"
+MD5SUM="$( md5sum $PRGNAM-$VERSION.tar.xz | cut -d' ' -f1 )"
+
+Don't forget to upload the new source!
+EOF
diff --git a/network/ipxnet/ipxnet.SlackBuild b/network/ipxnet/ipxnet.SlackBuild
new file mode 100644
index 0000000000000..c6d4810cff14e
--- /dev/null
+++ b/network/ipxnet/ipxnet.SlackBuild
@@ -0,0 +1,94 @@
+#!/bin/sh
+
+# Slackware build script for ipxnet
+
+# Written by B. Watson (yalhcru@gmail.com)
+
+# Licensed under the WTFPL. See http://www.wtfpl.net/txt/copying/ for details.
+
+# We install the binary setuid nobody/nogroup by default.
+IPXUSER="${IPXUSER:-nobody}"
+IPXGROUP="${IPXGROUP:-nogroup}"
+
+PRGNAM=ipxnet
+VERSION=${VERSION:-20120808.0dce97e}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.xz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+chmod 644 *
+
+# We build 2 binaries: One with logging enabled, setuid nobody/nogroup,
+# for persistent daemon (init script) use... and one that doesn't log
+# to a file or daemonize (just prints to stdout), for normal users to
+# start at will.
+
+# System version first:
+sed -i "/#define *LOGNAME/s, \".*, \"/var/log/$PRGNAM.log\"," config.h
+make CXXFLAGS="$SLKCFLAGS" LIBS="-lSDL_net -lSDL"
+install -D -m6550 -o$IPXUSER -g$IPXGROUP -s $PRGNAM $PKG/usr/sbin/${PRGNAM}-system
+
+# Now the user one:
+sed -i "/#define *LOG_TO_FILE/s,#define,#undef," config.h
+make clean
+make CXXFLAGS="$SLKCFLAGS" LIBS="-lSDL_net -lSDL"
+install -D -m755 -oroot -groot -s $PRGNAM $PKG/usr/bin/$PRGNAM
+
+# Startup script. Not enabled by default (README explains what to do).
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.$PRGNAM > $PKG/etc/rc.d/rc.$PRGNAM.new
+cat $CWD/rc.$PRGNAM.conf > $PKG/etc/rc.d/rc.$PRGNAM.conf.new
+
+# doinst.sh installs blank log file, only need to include /var/log here.
+mkdir -p $PKG/var/log
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a README.md $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+sed -e "s,@IPXUSER@,$IPXUSER,g"   \
+    -e "s,@IPXGROUP@,$IPXGROUP,g" \
+    $CWD/doinst.sh > $PKG/install/doinst.sh
+
+# Our README includes init script instructions, include it.
+cat $CWD/README > $PKG/install/README_SBo.txt
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/ipxnet/ipxnet.info b/network/ipxnet/ipxnet.info
new file mode 100644
index 0000000000000..c17a1eaea5bf7
--- /dev/null
+++ b/network/ipxnet/ipxnet.info
@@ -0,0 +1,10 @@
+PRGNAM="ipxnet"
+VERSION="20120808.0dce97e"
+HOMEPAGE="https://github.com/intangir/ipxnet"
+DOWNLOAD="http://urchlay.naptime.net/~urchlay/src/ipxnet-20120808.0dce97e.tar.xz"
+MD5SUM="a6bebe9513240e145285e4526ea3114c"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="B. Watson"
+EMAIL="yalhcru@gmail.com"
diff --git a/network/ipxnet/rc.ipxnet b/network/ipxnet/rc.ipxnet
new file mode 100644
index 0000000000000..22733ce0e8a3f
--- /dev/null
+++ b/network/ipxnet/rc.ipxnet
@@ -0,0 +1,63 @@
+#!/bin/sh
+
+# "Simple" init script for SBo ipxnet, by B. Watson <yalhcru@gmail.com>. If
+# you need something fancier (multiple instances of ipxnet), feel free
+# to implement it here and send me the updated script. I'll add it to
+# the SBo build.
+
+# Note that ipxnet daemonizes itself immediately (before even checking if
+# it got the right number of command line arguments) and doesn't create a
+# PID file. Trying to capture the PID of the just-spawned ipxnet process
+# in this script is problematic, so I didn't bother with a PID file. We
+# can't even capture error messages (because it closed its stdout/stderr).
+
+# The default settings:
+IPXPORT=19900
+
+# If config file found, source it (can override IPXPORT)
+[ -e /etc/rc.d/rc.ipxnet.conf ] && source /etc/rc.d/rc.ipxnet.conf
+
+ok_fail() {
+  if [ "$?" = "0" ]; then
+    echo "OK"
+    exit 0
+  else
+    echo "FAIL"
+    exit 1
+  fi
+}
+
+# returns success if an ipxnet process is listening on our port.
+is_running() {
+  lsof +c 0 -i 4UDP:$IPXPORT | grep -q ipxnet-system
+}
+
+# ipxnet doesn't exit with error status if it fails to start. So we have
+# to check whether it started or not... we wait up to 20 sec or so, then
+# give up.
+check_start() {
+  for i in 0.2 0.5 1 3 6 10; do
+    sleep $i
+    is_running && return 0
+  done
+  return 1
+}
+
+case "${1:-start}" in
+  start)
+    echo -n "Starting ipxnet on UDP port $IPXPORT: "
+    if is_running; then
+      echo "Already running!"
+      exit 1
+    fi
+    /usr/sbin/ipxnet-system $IPXPORT
+	 check_start
+    ok_fail
+  ;;
+
+  stop)    echo -n "Stopping ipxnet: "; killall ipxnet-system ; ok_fail ;;
+
+  restart) $0 stop ; sleep 1; exec $0 start ;;
+
+  *) echo "Usage: $0 stop|stop|restart"
+esac
diff --git a/network/ipxnet/rc.ipxnet.conf b/network/ipxnet/rc.ipxnet.conf
new file mode 100644
index 0000000000000..bc9bfa34a0e16
--- /dev/null
+++ b/network/ipxnet/rc.ipxnet.conf
@@ -0,0 +1,15 @@
+# Config file for SBo ipxnet startup script, by B. Watson <yalhcru@gmail.com>.
+
+# ipxnet-system binary runs setuid nobody by default, but has the
+# cap_net_bind_service capability set. This gives the ipxnet-system
+# process the capability to open low-numbered ports (any port < 1024),
+# which could be a security concern: if ipxnet can be exploited, the
+# exploit code could listen on e.g. the ssh or http port. The alternative
+# (running ipxnet with root privileges) is much worse though: the exploit
+# code could do *anything* in that case.
+
+# The official assigned port number:
+IPXPORT=213
+
+# The port number from the DOSBox examples:
+# IPXPORT=19900
diff --git a/network/ipxnet/slack-desc b/network/ipxnet/slack-desc
new file mode 100644
index 0000000000000..54274192e95ec
--- /dev/null
+++ b/network/ipxnet/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+ipxnet: ipxnet (tunnel IPX over TCP/IP)
+ipxnet:
+ipxnet: Host a standalone IPX network over tcp for old DOS games running
+ipxnet: in dosbox.
+ipxnet:
+ipxnet:
+ipxnet:
+ipxnet:
+ipxnet:
+ipxnet:
+ipxnet: