network/znc: Updated for version 0.096.

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

7 files changed, 40 insertions, 47 deletions

diff --git a/network/znc/README b/network/znc/README
index b1b643f3796c9..f7883c1632a11 100644
--- a/network/znc/README
+++ b/network/znc/README
@@ -1,4 +1,4 @@
-ZNC is an advanced IRC bouncer
+ZNC is an advanced IRC bouncer.
 
 ZNC will remain connected to an IPv4 or IPv6 IRC server even while you
 are offline. You can reattach your client at a later time and catch up
@@ -15,15 +15,9 @@ simply run the build script like this:
 IPv6 support is also enabled by default; to disable it, run the script as:
 	WITH_IPV6=no ./znc.SlackBuild
 
-New since version 0.074 is the ability to use the 'c-ares' library. This
-package is available on SBo and will slightly increase performance
-by being able to do asynchronous DNS requests. By default this option
-is off, to enable it run the script as:
-WITH_CARES=yes ./znc.SlackBuild
-
 This is intended to be run as a nonprivileged user - by default, the
 build script uses "znc" as the user.  If you wish to change it, e.g. 
 to use the "nobody" user, then run the script as follows:
 	ZNC_USER=nobody ./znc.SlackBuild
 
-See README.SBo for configuration information.
+See README.SLACKWARE for configuration information.
diff --git a/network/znc/README.SBo b/network/znc/README.SLACKWARE
index a9972a7b5ca6e..b9467bb1ca65c 100644
--- a/network/znc/README.SBo
+++ b/network/znc/README.SLACKWARE
@@ -1,8 +1,9 @@
-znc README.SBo
+znc README.SLACKWARE
 
 Once the package is installed, you should create your config file using
 znc's own interactive utility; run the following command: 
-  su - _ZNC_USER_ -c '/usr/bin/znc --makeconf --datadir /etc/znc'
+    su - @ZNC_USER@ -c '/usr/bin/znc --makeconf --datadir /etc/znc'
+where '@ZNC_USER@' is replaced by the UID that you wish znc to run under
 
 Since znc is configured to run as a nonprivileged user by default in 
 this build script, you must choose a listening port higher than 1024.
@@ -15,4 +16,3 @@ will look for its configuation file in ~/.znc (which is /etc/znc/.znc
 as suggested by the build script).  This is irrelevant if you are using
 the init script supplied with the package, but it might be worth knowing
 just in case.
-
diff --git a/network/znc/doinst.sh b/network/znc/doinst.sh
index d888165f22cf3..a1600c56bcec2 100644
--- a/network/znc/doinst.sh
+++ b/network/znc/doinst.sh
@@ -1,22 +1,22 @@
 config() {
   NEW="$1"
   OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
   if [ ! -r $OLD ]; then
     mv $NEW $OLD
   elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
     rm $NEW
   fi
-  # Otherwise, we leave the .new copy for the admin to consider...
 }
-
-# Keep same perms on rc.znc.new:
-if [ -e etc/rc.d/rc.znc ]; then
-  cp -a etc/rc.d/rc.znc etc/rc.d/rc.znc.new.incoming
-  cat etc/rc.d/rc.znc.new > etc/rc.d/rc.znc.new.incoming
-  mv etc/rc.d/rc.znc.new.incoming etc/rc.d/rc.znc.new
-fi
-
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
 config etc/rc.d/rc.znc.new
+preserve_perms etc/rc.d/rc.znc.new 
 
diff --git a/network/znc/rc.znc b/network/znc/rc.znc
index bdc68e9a603e8..6fe3405415f06 100644
--- a/network/znc/rc.znc
+++ b/network/znc/rc.znc
@@ -4,7 +4,7 @@
 
 # User account under which ZNC should run; only change this if you 
 # know what you are doing :-)
-ZNC_USER="_ZNC_USER_"
+ZNC_USER="@ZNC_USER@"
 
 # First, a sanity check
 if [[ ! -e /etc/znc/configs/znc.conf ]]; then
diff --git a/network/znc/slack-desc b/network/znc/slack-desc
index 28b1fad15931b..b97a02cd4c770 100644
--- a/network/znc/slack-desc
+++ b/network/znc/slack-desc
@@ -5,7 +5,7 @@
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-     |-----handy-ruler------------------------------------------------------|
+   |-----handy-ruler------------------------------------------------------|
 znc: ZNC (an advanced IRC bouncer)
 znc:
 znc: ZNC will remain connected to an IPv4 or IPv6 IRC server even while you 
diff --git a/network/znc/znc.SlackBuild b/network/znc/znc.SlackBuild
index 35f6d3a507a28..d5da0fa26e41b 100644
--- a/network/znc/znc.SlackBuild
+++ b/network/znc/znc.SlackBuild
@@ -2,7 +2,7 @@
 
 # Slackware build script for ZNC
 
-# Copyright 2007-2009  Sean Donner (sean.donner at gmail dot com)
+# Copyright 2007-2009  Sean Donner (sean.donner@gmail.com)
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=znc
-VERSION=0.076
+VERSION=0.096
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
@@ -31,13 +31,12 @@ ZNC_USER=${ZNC_USER:-znc}
 WITH_SSL=${WITH_SSL:-yes}
 WITH_IPV6=${WITH_IPV6:-yes}
 WITH_CARES=${WITH_CARES:-no}
+WITH_PERL=${WITH_PERL:-no}
 
-# Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
     i?86) ARCH=i486 ;;
     arm*) ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
        *) ARCH=$( uname -m ) ;;
   esac
 fi
@@ -56,16 +55,13 @@ elif [ "$ARCH" = "i686" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
    SLKCFLAGS="-O2 -fPIC"
    LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
 fi
 
 # Bail if user and/or group isn't valid on your system
 # uid=219 is suggested to avoid conflicts with other SBo packages,
 # but it's your call: http://slackbuilds.org/uid_gid.txt
 if ! grep -q "^$ZNC_USER:" /etc/passwd; then
-  echo "  You must have a $ZNC_USR user to run this script. "
+  echo "  You must have a $ZNC_USER user to run this script. "
   echo "  Something like this should suffice for most systems: "
   echo "      # useradd -u 219 -g 99 -c \"ZNC User\" -d /etc/znc $ZNC_USER"
   exit 1
@@ -100,6 +96,12 @@ else
   do_cares="--enable-c-ares"
 fi
 
+if [ "$WITH_PERL" != "yes" ]; then
+  do_perl="--disable-c-ares"
+else
+  do_perl="--enable-perl"
+fi
+
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
 ./configure \
@@ -112,17 +114,14 @@ CXXFLAGS="$SLKCFLAGS" \
   --enable-extra \
   $do_openssl \
   $do_ipv6 \
-  $do_cares
+  $do_cares \
+  $do_perl
 
 make all
 make install DESTDIR=$PKG
 
-( cd $PKG
-  find . -exec file {} + | sed -n '/ELF.*executable\|shared object/s/:.*$//p' | \
-  	xargs strip --strip-unneeded 2> /dev/null || true
-  find . -exec file {} + | sed -n '/current ar archive/s/:.*$//p' | \
-  	xargs strip --strip-debug 2> /dev/null || true
-)
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
 
 # Change the ownership of the configuration directory
 mkdir -p $PKG/etc/znc
@@ -130,7 +129,7 @@ chown -R $ZNC_USER $PKG/etc/znc
 
 # Install an init script 
 mkdir -p $PKG/etc/rc.d
-sed -e "s/_ZNC_USER_/$ZNC_USER/g" -e "s/_VERSION_/$VERSION/g" $CWD/rc.znc \
+sed -e "s/@ZNC_USER@/$ZNC_USER/g" -e "s/@VERSION@/$VERSION/g" $CWD/rc.znc \
   > $PKG/etc/rc.d/rc.znc.new
 
 mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
@@ -138,8 +137,8 @@ cp -a \
   AUTHORS LICENSE* README \
   $PKG/usr/doc/$PRGNAM-$VERSION
 cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-sed s/_ZNC_USER_/$ZNC_USER/g $CWD/README.SBo > \
-  $PKG/usr/doc/$PRGNAM-$VERSION/README.SBo
+sed "s/@ZNC_USER@/$ZNC_USER/g" $CWD/README.SLACKWARE > \
+  $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
diff --git a/network/znc/znc.info b/network/znc/znc.info
index 25293974fb100..426d269144dc6 100644
--- a/network/znc/znc.info
+++ b/network/znc/znc.info
@@ -1,10 +1,10 @@
 PRGNAM="znc"
-VERSION="0.076"
+VERSION="0.096"
 HOMEPAGE="http://en.znc.in/wiki/ZNC"
-DOWNLOAD="http://downloads.sourceforge.net/znc/znc-0.076.tar.gz"
-MD5SUM="03c2804b91225e83884f06078f6db568"
+DOWNLOAD="http://downloads.sourceforge.net/znc/znc-0.096.tar.gz"
+MD5SUM="38eec4f1911a68b4d2fc704170e7cbf6"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 MAINTAINER="Sean Donner"
-EMAIL="sean.donner at gmail dot com"
-APPROVED="Erik Hanson"
+EMAIL="sean.donner@gmail.com"
+APPROVED="rworkman"