network/hylafax: Removed (ftb + no active maintainer)

1 files changed, 0 insertions, 255 deletions

diff --git a/network/hylafax/config.local.in b/network/hylafax/config.local.in
deleted file mode 100644
index 20412e22fe967..0000000000000
--- a/network/hylafax/config.local.in
+++ /dev/null
@@ -1,255 +0,0 @@
-# $Id: config.site,v 1.24 2009/04/23 12:45:30 aidan Exp $
-#
-# HylaFAX Facsimile Software
-#
-# Copyright (c) 1990-1996 Sam Leffler
-# Copyright (c) 1991-1996 Silicon Graphics, Inc.
-# HylaFAX is a trademark of Silicon Graphics, Inc.
-# 
-# Permission to use, copy, modify, distribute, and sell this software and 
-# its documentation for any purpose is hereby granted without fee, provided
-# that (i) the above copyright notices and this permission notice appear in
-# all copies of the software and related documentation, and (ii) the names of
-# Sam Leffler and Silicon Graphics may not be used in any advertising or
-# publicity relating to the software without the specific, prior written
-# permission of Sam Leffler and Silicon Graphics.
-# 
-# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
-# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
-# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
-# 
-# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
-# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
-# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
-# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
-# OF THIS SOFTWARE.
-#
-
-#
-# This file holds site-specific configuration parameters.
-#
-# Nothing is defined in here by default, the definitions
-# commented out below serve as documentation for what you
-# can set in this file or a config.local file.
-#
-# Note that you do not need to set anything here unless you
-# want to override the auto-configuration behaviour and/or
-# interactive prompting done by the configure script.
-#
-
-#
-# Package controls.
-#
-#DSO="auto"			# configure DSO support (auto|IRIX|no)
-#GETTY="auto"			# type of getty support (auto|BSD|SysV)
-#PS="auto"			# PostScript support to use (auto|gs|dps|imp)
-#SGI2FAX="auto"			# configure SGI image support (auto|yes|no)
-#DPS="no"			# install SGI DPS-based RIP (yes|no)
-GS="no" 			# install Ghostscript RIP (yes|no)
-#IMP="no"			# install SGI Impressario 2.1 support (yes|no)
-#REGEX="yes"			# use distributed regular expression package
-#UTMP="utmpx"			# type of utmp+wtmp handling (auto|utmp|utmpx)
-#NLS="auto"			# enable NLS support (auto|yes|no)
-
-#
-# Directory parameters.
-#
-DIR_BIN="/usr/bin"		        # directory for client apps
-DIR_LIB="/usr/lib@LIBDIRSUFFIX@"        # directory for libfaxserver, libfaxutil
-DIR_LIBDATA="/usr/lib@LIBDIRSUFFIX@/hylafax"		# directory for client data
-DIR_LIBEXEC="/usr/libexec/hylafax"	# directory for libraries&hidden apps
-DIR_LOCALE='/usr/share/locale'
-DIR_MAN="/usr/man"		        # directory for manual pages
-DIR_SPOOL="/var/spool/hylafax"		# directory for spooling area
-DIR_SBIN="/usr/sbin"		        # directory for system apps
-#DIR_LOCKS="/usr/spool/locks"		# directory for UUCP lock files
-#FONTMAP="/usr/share/ghostscript/3.33"	# directorys containing Fontmap files
-#PATH_AFM="/usr/lib@LIBDIRSUFFIX@/DPS/AFM"		# directorys for AFM files
-
-#
-# Miscellaneous parameters.
-#
-#DEFVRES="196"				# default vertical res for outbound fax
-#FILLORDER="MS2LSB"			# bit order of cpu (MSB2LSB/LSB2MSB)
-FAXGID="uucp"				# group ID for fax user
-FAXUID="uucp"				# user ID for fax user
-PAGESIZE="North American Letter"	# default page size
-SYSGID="root"				# group ID for system installs
-SYSUID="root"				# user ID for system installs
-#LOCKS="ascii"				# default UUCP lockfile scheme
-#
-#PATH_GETTY="/etc/getty"		# pathname of suitable getty program
-#PATH_VGETTY="/bin/vgetty"		# pathname of voice getty program
-#PATH_EGETTY="/bin/egetty"		# pathname of external getty program
-#PATH_SENDMAIL="/usr/lib@LIBDIRSUFFIX@/sendmail"	# pathname of suitable sendmail program
-PATH_GSRIP="/usr/bin/gs"		# pathname of Ghostscript-based RIP
-#PATH_DPSRIP="/var/spool/hylafax/bin/ps2fax.exe" # pathname of DPS-based RIP
-#PATH_IMPRIP="/usr/lib@LIBDIRSUFFIX@/print/psrip"	# pathname of Impressario 2.1 RIP
-#MANSCHEME="sysv-source-cat-strip"	# manual page installation scheme
-SYSVINIT="auto"		                # install SysV-style init support (auto|yes|no)
-DIR_SYSVINIT="/etc/rc.d"                # location of SysV-style init script
-DIR_SYSVINITSTART="/etc/rc.d"	        # location of SysV-style start script
-DIR_SYSVINITSTOP="/etc/rc.d"	        # location of SysV-style stop script
-NAME_SYSVINITSTART="rc.hylafax"	        # name of SysV-style start script
-NAME_SYSVINITSTOP="rc.hylafax"	        # name of SysV-style stop script
-FAXQ_SERVER=yes		                # init script starts faxq
-HFAXD_SERVER=yes		        # init script starts hfaxd
-HFAXD_SNPP_SERVER=no		        # don't start paging protocol
-
-# SVR4 packaging stuff
-#PKG_ARCH=				# ARCH variable in pkginfo file
-#PKG_EMAIL=someone@somehost.somedomain	# EMAIL variable in pkginfo file
-#PKG_VENDOR="Your Name Here"		# VENDOR variable in pkginfo file
-#
-
-#
-# Parameters used when building the software.
-#
-# Note that configure has several ENVOPTS built into it that are
-# set according to the target.  This is done to help naive folks.
-#
-# Beware of changing the INSTALL definition; you *must* have an
-# install script that emulates the Silicon Graphics install program!
-#
-#AR="/bin/ar"				# pathname of suitable ar program
-#AROPTS="rc"				# options to ar for creating archive
-#CC="gcc"				# name/pathname of C compiler
-#CXX="gcc"				# name/pathname of C++ compiler
-#CXXFILE="-x c++"			# options for proper C++ processing
-#ENVOPTS="-Aa"				# options for getting ANSI C
-#GCOPTS="-g"				# options to pass C compiler
-#GCXXOPTS="-g"				# options to pass C++ compiler
-#GENDIST="/sbin/gendist"		# pathname of SGI inst generator program
-#INSTALL='${SHELL} ${PORT}/install.sh'	# SGI install program/emulator
-#LIBMALLOC="auto"			# yes|no|auto configure -lmalloc use
-#LIBPORT='${PORT}/libport.a'		# library with emulation code
-#LIBSUN="auto"				# yes|no|auto configure -lsun use
-#LLDOPTS=""				# extra link line options
-#MACHDEPLIBS=""				# extra libraries for linking
-#OPTIMIZER="-O"				# optimizer flags
-#PORTFUNCS=""				# non-standard functions to emulate
-#PROTOTYPES="-prototypes"		# C compiler options for checking function prototypes
-#RANLIB=":"				# pathname of suitable ranlib program
-#SHDLIBC="-lc_s"			# shared C library, if not standard
-#SIGHANDLERTYPES='(void(*)(int,...))'	# types to check for signal handler
-#STRIP="/bin/strip"			# strip program used by install.sh
-
-#
-# The source for the TIFF library is not required
-# to build this software, but the library is required
-# to link against.  If libtiff is installed in a
-# non-standard location then setup LIBTIFF accordingly.
-#
-LIBTIFF="-L/usr/lib@LIBDIRSUFFIX@ -ltiff"	# linkage convention for libtiff
-TIFFINC="-I/usr/include"		# place to find tiffio.h
-TIFFBIN="/usr/bin"		# where TIFF tools live
-
-#
-# The source for the ZLIB library is not required
-# to build this software, but the library is required
-# to link against.  If ZLIB is installed in a 
-# non-standard location then setup LIBZ accordingly.
-#
-LIBZ="-L/usr/lib@LIBDIRSUFFIX@ -lz"		# linkage convention for libz
-ZLIBINC="-I/usr/include"	# place to find zlib.h
-
-#
-# The source for the POSIX regular expression package
-# is not required to build this software, but the package
-# is required to link against.  If the copy of the software
-# that is included in this distribution is not to be used
-# then set REGEX=no and supply the following definitions.
-#
-#LIBREGEX=""				# linkage convention for regex package
-#REGEXINC="-I/usr/include"		# place to find regex.h
-
-#
-# NLS (gettext) library support is used by default if it's found
-# xgettext is not required to build this software, but if you try
-# and rebuild the message template catalogs, you will need it.  Some
-# platforms may need extra options to link for libintl as well.
-#
-INTLINC="-I/usr/include"
-#LIBINTL=""				# configure will try LIBINTL="-lintl"
-#XGETTEXT="xgettext --foreign-user -ctranslator --no-wrap --sort-by-file --omit-header --strict --indent --force-po"
-#MSGMERGE="msgmerge --no-wrap --sort-by-file"
-#MSGFMT=msgfmt
-#MSGCAT=msgcat
-
-#
-# Parameters to control various workarounds for system bugs.
-#
-# These parameters are normally set in configure based on
-# the target system.  If they are set here, then they will
-# override anything done by configure.
-#
-#CONFIG_OPENFIFO="O_RDONLY"		# mode to open FIFOs in server proc's
-#CONFIG_FIFOBUG="yes"			# enable workaround for FIFO select bug
-#CONFIG_TIOCMBISBYREF="yes"		# pass arg by reference to ioctl
-#CONFIG_WINSZHACK="no"			# include extra files for TIOCWINSZ use
-#CONFIG_ABORTBUG="no"			# enable workaround for abort problems
-#CONFIG_NOREOPEN="yes"			# reopen tty device after toggling DTR
-#CONFIG_NOSTDINDUP="yes"		# do not redirect stdout to stdin in ondelay
-#CONFIG_BADEXECVPROTO="no"		# system has incorrect execv func decl
-#CONFIG_BADEXECVEPROTO="no"		# system has incorrect execve func decl
-#CONFIG_BADGETOPTPROTO="no"		# system has incorrect getopt func decl
-#CONFIG_SOCKARGLENTYPE="unsigned long"	# call-by-ref arg type for socket funcs
-#CONFIG_BADSELECTPROTO="no"		# system has way old select func decl
-#CONFIG_MAXGID="5999"			# maximum permissable GID
-#CONFIG_OSFCNH="auto"			# control inclusion of <osfcn.h>
-
-#
-# Dynamic Shared Object (DSO) support.
-#
-# Beware that adding new support for DSOs may require some
-# modifications to the */Makefile.dso files.
-#
-#DSOSUF="so"				# DSO filename suffix
-#DSODELAY="-delay_load"			# DSO option for delayed loading
-#DSOOPTS="-shared -rdata_shared"	# options for building DSOs
-
-#
-# Makefile construction parameters.
-#
-# These should not normally be set; configure will
-# deduce the appropriate syntax to use for includes.
-#
-#MAKECXXOVERRIDE="=.C"			# make override stuff for SunPRO C++
-#MAKEDEPINCLUDE="include"		# make include for dependency files
-#MAKEDSOINCLUDE="#"			# make include for DSO support
-#MAKEINCLUDE=".include"			# make include syntax
-#MAKELQUOTE="<"				# make include syntax
-#MAKERQUOTE=">"				# make include syntax
-#SETMAKE='MAKE	= ${MAKE}'		# define if make does not setup $MAKE
-#MKDEPCOPTS=""				# C compiler opts to supply w/ -M
-#MKDEPCXXOPTS=""			# C++ compiler opts to supply w/ -M
-
-#
-# General system stuff used by the distribution.
-#
-# Beware of setting these as configure selects several programs
-# based on whether or not they are capable of processing scripts
-# included in the distribution (e.g AWK and SCRIPT_SH, SED).
-#
-#AWK="/bin/awk"				# pathname of suitable awk program
-#CAT="/bin/cat"				# pathname of suitable cat program
-#CHGRP="/etc/chgrp"			# pathname of suitable chgrp program
-#CHMOD="/etc/chmod"			# pathname of suitable chmod program
-#CHOWN="/etc/chown"			# pathname of suitable chown program
-#CMP="/bin/cmp"				# pathname of suitable cmp program
-#COL="/bin/col"				# pathname of suitable col program
-#CP="/bin/cp"				# pathname of suitable cp program
-#ECHO="/bin/echo"			# pathname of suitable echo program
-#GREP="/bin/grep"			# pathname of suitable grep program
-#LN="/bin/ln"				# pathname of suitable ln program
-#LN_S="-s"				# option to ${LN} to create symlink
-#MAN="/usr/bin/man"			# pathname of suitable man program
-MKDIR="/bin/mkdir -p"			# pathname of suitable mkdir program
-#MKFIFO="/bin/mkfifo"			# pathname of suitable mkfifo program
-#MV="/bin/mv"				# pathname of suitable mv program
-#MV_F="-f"				# option to ${MV} to force operation
-#RMCMD="/bin/rm"			# pathname of suitable rm program
-#SED="/bin/sed"				# pathname of suitable sed program
-#SCRIPT_SH="/bin/sh"			# pathname of suitable shell
-#SORT="/bin/sort"			# pathname of suitable sort program