network/heimdal: Updated for version 1.2.1

1 files changed, 54 insertions, 69 deletions

diff --git a/network/heimdal/heimdal.SlackBuild b/network/heimdal/heimdal.SlackBuild
index 416140552da3..df146ea9459f 100644
--- a/network/heimdal/heimdal.SlackBuild
+++ b/network/heimdal/heimdal.SlackBuild
@@ -1,16 +1,19 @@
 #!/bin/sh
 
 # Slackware build script for KTH Heimdal Kerberos
-
 # Written by Menno E. Duursma <druiloor@zonnet.nl>
-# All rights reserved.
 # Modified by the SlackBuilds.org project
 
+# This program is free software. It comes without any warranty.
+# Granted WTFPL, Version 2, as published by Sam Hocevar. See
+# http://sam.zoy.org/wtfpl/COPYING for more details.
+
 PRGNAM=heimdal
-VERSION=0.7.2
+VERSION=1.2.1
 ARCH=${ARCH:-i486}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
+
 CWD=$(pwd)
 TMP=${TMP:-/tmp/SBo}
 PKG=$TMP/package-$PRGNAM
@@ -20,112 +23,101 @@ if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
 elif [ "$ARCH" = "i686" ]; then
   SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
 fi
 
+set -e # Exit immediately if a command exits with a non-zero status.
+
 rm -rf $PKG
 mkdir -p $TMP $PKG $OUTPUT
-cd $TMP || exit 1
+cd $TMP
 rm -rf $PRGNAM-$VERSION
-tar xzvf $CWD/$PRGNAM-$VERSION.tar.gz || exit 1
-cd $PRGNAM-$VERSION || exit 1
-
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
 chown -R root:root .
-chmod -R a-s,u+w,go+r-w .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 \
+  -o -perm 400 \) -exec chmod 644 {} \;
+
 
 # Note about OpenLDAP:
 # The openldap-client package is part of Slackware since the 11.0 release.
 # If you want to store your KDC database in LDAP, you will need to configure
 # Heimdal with support for OpenLDAP:
-# Replace the line "--without-openldap" in the "configure" command a few lines
-# further down with: "--with-openldap=/usr"
-
+# Replace this:  "--without-openldap"  with this:  "--with-openldap=/usr"
+# in the configure lines below
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr/heimdal \
+  --infodir=/usr/info \
+  --mandir=/usr/man \
   --enable-shared=yes \
   --enable-kcm \
-  --without-krb4 \
   --without-hesiod \
   --without-ipv6 \
   --without-openldap \
   --with-x \
-  || exit 1
-
-make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-( cd $PKG
-  find . -type f | \
-    xargs file | \
-    grep "executable" | \
-    grep ELF | \
-    cut -f 1 -d : | \
-    xargs strip --strip-unneeded \
-  2> /dev/null
-
-  find . -type f | \
-    xargs file | \
-    grep "shared object" | \
-    grep ELF | \
-    cut -f 1 -d : | \
-    xargs strip --strip-unneeded \
-  2> /dev/null
+  --build=$ARCH-slackware-linux \
+  --host=$ARCH-slackware-linux
+
+make
+make install DESTDIR=$PKG
+
+( cd $PKG || exit 1
+  find . -type f \
+    | xargs file \
+      | grep -e "executable" -e "shared object" \
+        | grep ELF \
+          | cut -f 1 -d : \
+            | xargs strip --strip-unneeded  2> /dev/null
 )
 
-# Compress manual pages, delete 'cat' pages that do not belong here
-( cd $PKG/usr/heimdal/man
-  rm -rf cat?
-  for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm -f $i ; done
-  find . -type f -name "*.?" -exec gzip -9f {} \;
+( cd $PKG/usr/man || exit 1
+  rm -rf cat*
+  find . -type f -exec gzip -9 {} \;
+  for i in $(find . -type l) ; do
+    ln -s $(readlink $i).gz $i.gz ; rm $i
+  done
 )
 
-# Compress info pages
-( cd $PKG/usr/heimdal/info
-  find . -type f \! -name dir -exec gzip -9 {} \;
+( cd $PKG/usr/info || exit 1
+  rm -f dir
+  find . -type f -exec gzip -9 {} \;
   # Link the main compressed info page to a name as if it was clear
   # as otherwise the GNU info utility somehow fails to render it...
   ln -s heimdal.info.gz heimdal
 )
 
-# Documentation :
 mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a  NEWS README TODO* config.log krb5.conf \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/ChangeLog
-  cp -a ChangeLog* $PKG/usr/doc/$PRGNAM-$VERSION/ChangeLog
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/etc
-cp -a etc/services.append \
-  $PKG/usr/doc/$PRGNAM-$VERSION/etc
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/doc
-cp -a doc/{init-creds,layman.asc,mdate-sh} \
-  $PKG/usr/doc/$PRGNAM-$VERSION/doc
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/doc/standardisation
-cp -a doc/standardisation/* \
-  $PKG/usr/doc/$PRGNAM-$VERSION/doc/standardisation
-
-# Include this script as doc aswell
+cp -a [A-Z][A-Z]* ChangeLog* etc/services.append $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a doc/{init-creds,layman.asc,mdate-sh} $PKG/usr/doc/$PRGNAM-$VERSION
 cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+cat $CWD/README > $PKG/usr/doc/$PRGNAM-$VERSION/README.SBo
+find $PKG/usr/doc -type f -exec chmod -x {} \;
 
 # Add sample krb5.conf file (may not be needed)
 mkdir -p $PKG/etc
-cp krb5.conf $PKG/etc/krb5.conf-sample.new
+cat krb5.conf > $PKG/etc/krb5.conf-sample.new
 
 # Create directory for the KDC to use
 mkdir -p $PKG/var/heimdal
 
-# Add sample kdc.conf file
-cat $CWD/kdc.conf >$PKG/var/heimdal/kdc.conf-sample.new
+# Add sample kdc.conf file (may not be needed)
+cat $CWD/kdc.conf > $PKG/var/heimdal/kdc.conf-sample.new
 
 # Include a KDC rc-file for the admin to consider
 mkdir -p $PKG/etc/rc.d
 cat $CWD/rc.heimdal > $PKG/etc/rc.d/rc.heimdal.new
-chmod +x $PKG/etc/rc.d/rc.heimdal.new
 
-# Add heimdal to INFOPATH , MANPATH and PATH
+# Add heimdal to INFOPATH, MANPATH, and PATH
 mkdir -p $PKG/etc/profile.d
 cat $CWD/heimdal.sh > $PKG/etc/profile.d/heimdal.sh.new
 cat $CWD/heimdal.csh > $PKG/etc/profile.d/heimdal.csh.new
+chmod 0755 $PKG/etc/profile.d/*
 
 mkdir $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
@@ -133,10 +125,3 @@ cat $CWD/doinst.sh > $PKG/install/doinst.sh
 
 cd $PKG
 /sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
-
-# Clean up the extra stuff:
-if [ "$1" = "--cleanup" ]; then
-  rm -rf $TMP/$PRGNAM-$VERSION
-  rm -rf $PKG
-fi
-