network/exim: Added to 12.2 repository

9 files changed, 1586 insertions, 0 deletions

diff --git a/network/exim/README b/network/exim/README
new file mode 100644
index 000000000000..70321898b0b0
--- /dev/null
+++ b/network/exim/README
@@ -0,0 +1,28 @@
+Exim is a mail transfer agent (MTA) used on Unix-like operating systems. 
+It is freely available under the GNU GPL and it aims to be a general 
+and flexible mailer with extensive facilities for checking incoming e-mail.
+
+Exim was orginally written by Philip Hazel for use in the University 
+of Cambridge Computing Services e-mail systems. 
+
+Exim has no configure but requires the exim.Makefile. This file is included
+with the makefile. The exim.Makefile has some of the more important attributes
+enabled such as Content scanning, Database integration ((only Mysql), extra 
+security facilities (such as TCPWRAPPERS) and more.  
+
+Also "eximon" (the configuration for this is eximon.Makefile) and  has been 
+included which a nice and simple monitoring tool for X and hence can be used 
+from any console to monitor your MTA. Please read through both files 
+and mofidy them as you see fit.
+
+All documentation for exim is included in /usr/doc/exim-*. Another good 
+source for documentation can be found at http://www.exim-new-users.co.uk/.
+
+To fully integrate Exim with the rest of your system you would have to create 
+symlinks for sendmail to point to the exim binary. Please *NOTE* that this 
+might break sendmail from working. If you ever remove exim, you might need to
+reinstall Sendmail.
+
+Finally Exim can be integrated with other email tools such as Clamav,
+Spamassassin, Bogofilter and others, which are available at Slackbuilds.org.
+
diff --git a/network/exim/doinst.sh b/network/exim/doinst.sh
new file mode 100644
index 000000000000..5e76fa1af310
--- /dev/null
+++ b/network/exim/doinst.sh
@@ -0,0 +1,21 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.exim.new:
+if [ -e etc/rc.d/rc.exim ]; then
+  cp -a etc/rc.d/rc.exim etc/rc.d/rc.exim.new.incoming
+  cat etc/rc.d/rc.exim.new > etc/rc.d/rc.exim.new.incoming
+  mv etc/rc.d/rc.exim.new.incoming etc/rc.d/rc.exim.new
+fi
+
+config etc/rc.d/rc.exim.new
+config etc/exim/exim.conf.new
diff --git a/network/exim/exim.Makefile b/network/exim/exim.Makefile
new file mode 100644
index 000000000000..0da094c85984
--- /dev/null
+++ b/network/exim/exim.Makefile
@@ -0,0 +1,1137 @@
+# $Cambridge: exim/exim-src/src/EDITME,v 1.20 2007/01/22 16:29:54 ph10 Exp $
+
+##################################################
+#          The Exim mail transport agent         #
+##################################################
+
+# This is the template for Exim's main build-time configuration file. It
+# contains settings that are independent of any operating system. These are
+# things that are mostly sysadmin choices. The items below are divided into
+# those you must specify, those you probably want to specify, those you might
+# often want to specify, and those that you almost never need to mention.
+
+# Edit this file and save the result to a file called Local/Makefile within the
+# Exim distribution directory before running the "make" command.
+
+# Things that depend on the operating system have default settings in
+# OS/Makefile-Default, but these are overridden for some OS by files called
+# called OS/Makefile-<osname>. You can further override these by creating files
+# called Local/Makefile-<osname>, where "<osname>" stands for the name of your
+# operating system - look at the names in the OS directory to see which names
+# are recognized.
+
+# However, if you are building Exim for a single OS only, you don't need to
+# worry about setting up Local/Makefile-<osname>. Any build-time configuration
+# settings you require can in fact be placed in the one file called
+# Local/Makefile. It is only if you are building for several OS from the same
+# source files that you need to worry about splitting off your own OS-dependent
+# settings into separate files. (There's more explanation about how this all
+# works in the toplevel README file, under "Modifying the building process", as
+# well as in the Exim specification.)
+
+# One OS-specific thing that may need to be changed is the command for running
+# the C compiler; the overall default is gcc, but some OS Makefiles specify cc.
+# You can override anything that is set by putting CC=whatever in your
+# Local/Makefile.
+
+# NOTE: You should never need to edit any of the distributed Makefiles; all
+# overriding can be done in your Local/Makefile(s). This will make it easier
+# for you when the next release comes along.
+
+# The location of the X11 libraries is something else that is quite variable
+# even between different versions of the same operating system (and indeed
+# there are different versions of X11 as well, of course). The four settings
+# concerned here are X11, XINCLUDE, XLFLAGS (linking flags) and X11_LD_LIB
+# (dynamic run-time library). You need not worry about X11 unless you want to
+# compile the Exim monitor utility. Exim itself does not use X11.
+
+# Another area of variability between systems is the type and location of the
+# DBM library package. Exim has support for ndbm, gdbm, tdb, and Berkeley DB.
+# By default the code assumes ndbm; this often works with gdbm or DB, provided
+# they are correctly installed, via their compatibility interfaces. However,
+# Exim can also be configured to use the native calls for Berkeley DB (obsolete
+# versions 1.85, 2.x, 3.x, or the current 4.x version) and also for gdbm.
+
+# For some operating systems, a default DBM library (other than ndbm) is
+# selected by a setting in the OS-specific Makefile. Most modern OS now have
+# a DBM library installed as standard, and in many cases this will be selected
+# for you by the OS-specific configuration. If Exim compiles without any
+# problems, you probably do not have to worry about the DBM library. If you
+# do want or need to change it, you should first read the discussion in the
+# file doc/dbm.discuss.txt, which also contains instructions for testing Exim's
+# interface to the DBM library.
+
+# In Local/Makefiles blank lines and lines starting with # are ignored. It is
+# also permitted to use the # character to add a comment to a setting, for
+# example
+#
+# EXIM_GID=42   # the "mail" group
+#
+# However, with some versions of "make" this works only if there is no white
+# space between the end of the setting and the #, so perhaps it is best
+# avoided. A consequence of this facility is that it is not possible to have
+# the # character present in any setting, but I can't think of any cases where
+# this would be wanted.
+###############################################################################
+
+CFLAGS="#SLKCFLAGS#"
+
+###############################################################################
+#                    THESE ARE THINGS YOU MUST SPECIFY                        #
+###############################################################################
+
+# Exim will not build unless you specify BIN_DIRECTORY, CONFIGURE_FILE, and
+# EXIM_USER. You also need EXIM_GROUP if EXIM_USER specifies a uid by number.
+
+# If you don't specify SPOOL_DIRECTORY, Exim won't fail to build. However, it
+# really is a very good idea to specify it here rather than at run time. This
+# is particularly true if you let the logs go to their default location in the
+# spool directory, because it means that the location of the logs is known
+# before Exim has read the run time configuration file.
+
+#------------------------------------------------------------------------------
+# BIN_DIRECTORY defines where the exim binary will be installed by "make
+# install". The path is also used internally by Exim when it needs to re-invoke
+# itself, either to send an error message, or to recover root privilege. Exim's
+# utility binaries and scripts are also installed in this directory. There is
+# no "standard" place for the binary directory. Some people like to keep all
+# the Exim files under one directory such as /usr/exim; others just let the
+# Exim binaries go into an existing directory such as /usr/sbin or
+# /usr/local/sbin. The installation script will try to create this directory,
+# and any superior directories, if they do not exist.
+
+BIN_DIRECTORY=/usr/sbin
+
+
+#------------------------------------------------------------------------------
+# CONFIGURE_FILE defines where Exim's run time configuration file is to be
+# found. It is the complete pathname for the file, not just a directory. The
+# location of all other run time files and directories can be changed in the
+# run time configuration file. There is a lot of variety in the choice of
+# location in different OS, and in the preferences of different sysadmins. Some
+# common locations are in /etc or /etc/mail or /usr/local/etc or
+# /usr/local/etc/mail. Another possibility is to keep all the Exim files under
+# a single directory such as /usr/exim. Whatever you choose, the installation
+# script will try to make the directory and any superior directories if they
+# don't exist. It will also install a default runtime configuration if this
+# file does not exist.
+
+CONFIGURE_FILE=/etc/exim/exim.conf
+
+# It is possible to specify a colon-separated list of files for CONFIGURE_FILE.
+# In this case, Exim will use the first of them that exists when it is run.
+# However, if a list is specified, the installation script no longer tries to
+# make superior directories or to install a default runtime configuration.
+
+
+#------------------------------------------------------------------------------
+# The Exim binary must normally be setuid root, so that it starts executing as
+# root, but (depending on the options with which it is called) it does not
+# always need to retain the root privilege. These settings define the user and
+# group that is used for Exim processes when they no longer need to be root. In
+# particular, this applies when receiving messages and when doing remote
+# deliveries. (Local deliveries run as various non-root users, typically as the
+# owner of a local mailbox.) Specifying these values as root is very strongly
+# discouraged.
+
+#EXIM_USER=
+
+# If you specify EXIM_USER as a name, this is looked up at build time, and the
+# uid number is built into the binary. However, you can specify that this
+# lookup is deferred until runtime. In this case, it is the name that is built
+# into the binary. You can do this by a setting of the form:
+
+EXIM_USER=ref:exim
+
+# In other words, put "ref:" in front of the user name. If you set EXIM_USER
+# like this, any value specified for EXIM_GROUP is also passed "by reference".
+# Although this costs a bit of resource at runtime, it is convenient to use
+# this feature when building binaries that are to be run on multiple systems
+# where the name may refer to different uids. It also allows you to build Exim
+# on a system where there is no Exim user defined.
+
+# If the setting of EXIM_USER is numeric (e.g. EXIM_USER=42), there must
+# also be a setting of EXIM_GROUP. If, on the other hand, you use a name
+# for EXIM_USER (e.g. EXIM_USER=exim), you don't need to set EXIM_GROUP unless
+# you want to use a group other than the default group for the given user.
+
+EXIM_GROUP=exim
+
+# Many sites define a user called "exim", with an appropriate default group,
+# and use
+#
+# EXIM_USER=exim
+#
+# while leaving EXIM_GROUP unspecified (commented out).
+
+
+#------------------------------------------------------------------------------
+# SPOOL_DIRECTORY defines the directory where all the data for messages in
+# transit is kept. It is strongly recommended that you define it here, though
+# it is possible to leave this till the run time configuration.
+
+# Exim creates the spool directory if it does not exist. The owner and group
+# will be those defined by EXIM_USER and EXIM_GROUP, and this also applies to
+# all the files and directories that are created in the spool directory.
+
+# Almost all installations choose this:
+
+SPOOL_DIRECTORY=/var/spool/exim
+
+
+
+###############################################################################
+#           THESE ARE THINGS YOU PROBABLY WANT TO SPECIFY                     #
+###############################################################################
+
+# If you need extra header file search paths on all compiles, put the -I
+# options in INCLUDE.  If you want the extra searches only for certain
+# parts of the build, see more specific xxx_INCLUDE variables below.
+
+# INCLUDE=-I/example/include
+
+# You need to specify some routers and transports if you want the Exim that you
+# are building to be capable of delivering mail. You almost certainly need at
+# least one type of lookup. You should consider whether you want to build
+# the Exim monitor or not.
+
+
+#------------------------------------------------------------------------------
+# These settings determine which individual router drivers are included in the
+# Exim binary. There are no defaults in the code; those routers that are wanted
+# must be defined here by setting the appropriate variables to the value "yes".
+# Including a router in the binary does not cause it to be used automatically.
+# It has also to be configured in the run time configuration file. By
+# commenting out those you know you don't want to use, you can make the binary
+# a bit smaller. If you are unsure, leave all of these included for now.
+
+ROUTER_ACCEPT=yes
+ROUTER_DNSLOOKUP=yes
+ROUTER_IPLITERAL=yes
+ROUTER_MANUALROUTE=yes
+ROUTER_QUERYPROGRAM=yes
+ROUTER_REDIRECT=yes
+
+# This one is very special-purpose, so is not included by default.
+
+# ROUTER_IPLOOKUP=yes
+
+
+#------------------------------------------------------------------------------
+# These settings determine which individual transport drivers are included in
+# the Exim binary. There are no defaults; those transports that are wanted must
+# be defined here by setting the appropriate variables to the value "yes".
+# Including a transport in the binary does not cause it to be used
+# automatically. It has also to be configured in the run time configuration
+# file. By commenting out those you know you don't want to use, you can make
+# the binary a bit smaller. If you are unsure, leave all of these included for
+# now.
+
+TRANSPORT_APPENDFILE=yes
+TRANSPORT_AUTOREPLY=yes
+TRANSPORT_PIPE=yes
+TRANSPORT_SMTP=yes
+
+# This one is special-purpose, and commonly not required, so it is not
+# included by default.
+
+# TRANSPORT_LMTP=yes
+
+
+#------------------------------------------------------------------------------
+# The appendfile transport can write messages to local mailboxes in a number
+# of formats. The code for three specialist formats, maildir, mailstore, and
+# MBX, is included only when requested. If you do not know what this is about,
+# leave these settings commented out.
+
+ SUPPORT_MAILDIR=yes
+ SUPPORT_MAILSTORE=yes
+ SUPPORT_MBX=yes
+
+
+#------------------------------------------------------------------------------
+# These settings determine which file and database lookup methods are included
+# in the binary. See the manual chapter entitled "File and database lookups"
+# for discussion. DBM and lsearch (linear search) are included by default. If
+# you are unsure about the others, leave them commented out for now.
+# LOOKUP_DNSDB does *not* refer to general mail routing using the DNS. It is
+# for the specialist case of using the DNS as a general database facility (not
+# common).
+
+LOOKUP_DBM=yes
+LOOKUP_LSEARCH=yes
+
+# LOOKUP_CDB=yes
+# LOOKUP_DNSDB=yes
+LOOKUP_DSEARCH=yes
+# LOOKUP_IBASE=yes
+# LOOKUP_LDAP=yes
+LOOKUP_MYSQL=yes
+# LOOKUP_NIS=yes
+# LOOKUP_NISPLUS=yes
+# LOOKUP_ORACLE=yes
+LOOKUP_PASSWD=yes
+# LOOKUP_PGSQL=yes
+# LOOKUP_SQLITE=yes
+# LOOKUP_WHOSON=yes
+
+# These two settings are obsolete; all three lookups are compiled when
+# LOOKUP_LSEARCH is enabled. However, we retain these for backward
+# compatibility. Setting one forces LOOKUP_LSEARCH if it is not set.
+
+# LOOKUP_WILDLSEARCH=yes
+# LOOKUP_NWILDLSEARCH=yes
+
+
+#------------------------------------------------------------------------------
+# If you have set LOOKUP_LDAP=yes, you should set LDAP_LIB_TYPE to indicate
+# which LDAP library you have. Unfortunately, though most of their functions
+# are the same, there are minor differences. Currently Exim knows about four
+# LDAP libraries: the one from the University of Michigan (also known as
+# OpenLDAP 1), OpenLDAP 2, the Netscape SDK library, and the library that comes
+# with Solaris 7 onwards. Uncomment whichever of these you are using.
+
+# LDAP_LIB_TYPE=OPENLDAP1
+# LDAP_LIB_TYPE=OPENLDAP2
+# LDAP_LIB_TYPE=NETSCAPE
+# LDAP_LIB_TYPE=SOLARIS
+
+# If you don't set any of these, Exim assumes the original University of
+# Michigan (OpenLDAP 1) library.
+
+
+#------------------------------------------------------------------------------
+# Additional libraries and include directories may be required for some
+# lookup styles (e.g. LDAP, MYSQL or PGSQL). LOOKUP_LIBS is included only on
+# the command for linking Exim itself, not on any auxiliary programs. You
+# don't need to set LOOKUP_INCLUDE if the relevant directories are already
+# specified in INCLUDE. The settings below are just examples; -lpq is for
+# PostgreSQL, -lgds is for Interbase, -lsqlite3 is for SQLite.
+
+LOOKUP_INCLUDE=-I /usr/include/mysql 
+LOOKUP_LIBS=-L/usr/lib/mysql -lmysqlclient 
+
+#------------------------------------------------------------------------------
+# Compiling the Exim monitor: If you want to compile the Exim monitor, a
+# program that requires an X11 display, then EXIM_MONITOR should be set to the
+# value "eximon.bin". Comment out this setting to disable compilation of the
+# monitor. The locations of various X11 directories for libraries and include
+# files are defaulted in the OS/Makefile-Default file, but can be overridden in
+# local OS-specific make files.
+
+EXIM_MONITOR=eximon.bin
+
+
+#------------------------------------------------------------------------------
+# Compiling Exim with content scanning support: If you want to compile Exim
+# with support for message body content scanning, set WITH_CONTENT_SCAN to
+# the value "yes". This will give you malware and spam scanning in the DATA ACL,
+# and the MIME ACL. Please read the documentation to learn more about these
+# features.
+
+WITH_CONTENT_SCAN=yes
+
+# If you want to use the deprecated "demime" condition in the DATA ACL,
+# uncomment the line below. Doing so will also explicitly turn on the
+# WITH_CONTENT_SCAN option. If possible, use the MIME ACL instead of
+# the "demime" condition.
+
+WITH_OLD_DEMIME=yes
+
+#------------------------------------------------------------------------------
+# Compiling Exim with experimental features. These are documented in
+# experimental-spec.txt. "Experimental" means that the way these features are
+# implemented may still change. Backward compatibility is not guaranteed.
+
+# Uncomment the following lines to add SPF support. You need to have libspf2
+# installed on your system (www.libspf2.org). Depending on where it is installed
+# you may have to edit the CFLAGS and LDFLAGS lines.
+
+# EXPERIMENTAL_SPF=yes
+# CFLAGS  += -I/usr/local/include
+# LDFLAGS += -lspf2
+
+# Uncomment the following lines to add SRS (Sender rewriting scheme) support.
+# You need to have libsrs_alt installed on your system (srs.mirtol.com).
+# Depending on where it is installed you may have to edit the CFLAGS and
+# LDFLAGS lines.
+
+# EXPERIMENTAL_SRS=yes
+# CFLAGS  += -I/usr/local/include
+# LDFLAGS += -lsrs_alt
+
+# Uncomment the following lines to add Brightmail AntiSpam support. You need
+# to have the Brightmail client SDK installed. Please check the experimental
+# documentation for implementation details. You need to edit the CFLAGS and
+# LDFLAGS lines.
+
+# EXPERIMENTAL_BRIGHTMAIL=yes
+# CFLAGS  += -I/opt/brightmail/bsdk-6.0/include
+# LDFLAGS += -lxml2_single -lbmiclient_single -L/opt/brightmail/bsdk-6.0/lib
+
+
+
+###############################################################################
+#                 THESE ARE THINGS YOU MIGHT WANT TO SPECIFY                  #
+###############################################################################
+
+# The items in this section are those that are commonly changed according to
+# the sysadmin's preferences, but whose defaults are often acceptable. The
+# first five are concerned with security issues, where differing levels of
+# paranoia are appropriate in different environments. Sysadmins also vary in
+# their views on appropriate levels of defence in these areas. If you do not
+# understand these issues, go with the defaults, which are used by many sites.
+
+
+#------------------------------------------------------------------------------
+# Although Exim is normally a setuid program, owned by root, it refuses to run
+# local deliveries as root by default. There is a runtime option called
+# "never_users" which lists the users that must never be used for local
+# deliveries. There is also the setting below, which provides a list that
+# cannot be overridden at runtime. This guards against problems caused by
+# unauthorized changes to the runtime configuration. You are advised not to
+# remove "root" from this option, but you can add other users if you want. The
+# list is colon-separated. It must NOT contain any spaces.
+
+# FIXED_NEVER_USERS=root:bin:daemon
+FIXED_NEVER_USERS=root
+
+
+#------------------------------------------------------------------------------
+# By default, Exim insists that its configuration file be owned either by root
+# or by the Exim user. You can specify one additional permitted owner here.
+
+# CONFIGURE_OWNER=
+
+# If the configuration file is group-writeable, Exim insists by default that it
+# is owned by root or the Exim user. You can specify one additional permitted
+# group owner here.
+
+# CONFIGURE_GROUP=
+
+# If you specify CONFIGURE_OWNER or CONFIGURE_GROUP as a name, this is looked
+# up at build time, and the uid or gid number is built into the binary.
+# However, you can specify that the lookup is deferred until runtime. In this
+# case, it is the name that is built into the binary. You can do this by a
+# setting of the form:
+
+# CONFIGURE_OWNER=ref:mail
+# CONFIGURE_GROUP=ref:sysadmin
+
+# In other words, put "ref:" in front of the user or group name. Although this
+# costs a bit of resource at runtime, it is convenient to use this feature when
+# building binaries that are to be run on multiple systems where the names may
+# refer to different uids or gids. It also allows you to build Exim on a system
+# where the relevant user or group is not defined.
+
+
+#------------------------------------------------------------------------------
+# The -C option allows Exim to be run with an alternate runtime configuration
+# file. When this is used by root or the Exim user, root privilege is retained
+# by the binary (for any other caller, it is dropped). You can restrict the
+# location of alternate configurations by defining a prefix below. Any file
+# used with -C must then start with this prefix (except that /dev/null is also
+# permitted if the caller is root, because that is used in the install script).
+# If the prefix specifies a directory that is owned by root, a compromise of
+# the Exim account does not permit arbitrary alternate configurations to be
+# used. The prefix can be more restrictive than just a directory (the second
+# example).
+
+# ALT_CONFIG_PREFIX=/some/directory/
+# ALT_CONFIG_PREFIX=/some/directory/exim.conf-
+
+
+#------------------------------------------------------------------------------
+# If you uncomment the following line, only root may use the -C or -D options
+# without losing root privilege. The -C option specifies an alternate runtime
+# configuration file, and the -D option changes macro values in the runtime
+# configuration. Uncommenting this line restricts what can be done with these
+# options. A call to receive a message (either one-off or via a daemon) cannot
+# successfully continue to deliver it, because the re-exec of Exim to regain
+# root privilege will fail, owing to the use of -C or -D by the Exim user.
+# However, you can still use -C for testing (as root) if you do separate Exim
+# calls for receiving a message and subsequently delivering it.
+
+# ALT_CONFIG_ROOT_ONLY=yes
+
+
+#------------------------------------------------------------------------------
+# Uncommenting this option disables the use of the -D command line option,
+# which changes the values of macros in the runtime configuration file.
+# This is another protection against somebody breaking into the Exim account.
+
+# DISABLE_D_OPTION=yes
+
+
+#------------------------------------------------------------------------------
+# Exim has support for the AUTH (authentication) extension of the SMTP
+# protocol, as defined by RFC 2554. If you don't know what SMTP authentication
+# is, you probably won't want to include this code, so you should leave these
+# settings commented out. If you do want to make use of SMTP authentication,
+# you must uncomment at least one of the following, so that appropriate code is
+# included in the Exim binary. You will then need to set up the run time
+# configuration to make use of the mechanism(s) selected.
+
+AUTH_CRAM_MD5=yes
+AUTH_CYRUS_SASL=yes
+AUTH_DOVECOT=yes
+AUTH_PLAINTEXT=yes
+# AUTH_SPA=yes
+
+
+#------------------------------------------------------------------------------
+# If you specified AUTH_CYRUS_SASL above, you should ensure that you have the
+# Cyrus SASL library installed before trying to build Exim, and you probably
+# want to uncomment the following line:
+
+AUTH_LIBS=-lsasl2
+
+
+#------------------------------------------------------------------------------
+# When Exim is decoding MIME "words" in header lines, most commonly for use
+# in the $header_xxx expansion, it converts any foreign character sets to the
+# one that is set in the headers_charset option. The default setting is
+# defined by this setting:
+
+HEADERS_CHARSET="ISO-8859-1"
+
+# If you are going to make use of $header_xxx expansions in your configuration
+# file, or if your users are going to use them in filter files, and the normal
+# character set on your host is something other than ISO-8859-1, you might
+# like to specify a different default here. This value can be overridden in
+# the runtime configuration, and it can also be overridden in individual filter
+# files.
+#
+# IMPORTANT NOTE: The iconv() function is needed for character code
+# conversions. Please see the next item...
+
+
+#------------------------------------------------------------------------------
+# Character code conversions are possible only if the iconv() function is
+# installed on your operating system. There are two places in Exim where this
+# is relevant: (a) The $header_xxx expansion (see the previous item), and (b)
+# the Sieve filter support. For those OS where iconv() is known to be installed
+# as standard, the file in OS/Makefile-xxxx contains
+#
+# HAVE_ICONV=yes
+#
+# If you are not using one of those systems, but have installed iconv(), you
+# need to uncomment that line above. In some cases, you may find that iconv()
+# and its header file are not in the default places. You might need to use
+# something like this:
+#
+# HAVE_ICONV=yes
+# CFLAGS=-O -I/usr/local/include
+# EXTRALIBS_EXIM=-L/usr/local/lib -liconv
+#
+# but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM
+# as well.
+
+
+#------------------------------------------------------------------------------
+# The passwords for user accounts are normally encrypted with the crypt()
+# function. Comparisons with encrypted passwords can be done using Exim's
+# "crypteq" expansion operator. (This is commonly used as part of the
+# configuration of an authenticator for use with SMTP AUTH.) At least one
+# operating system has an extended function called crypt16(), which uses up to
+# 16 characters of a password (the normal crypt() uses only the first 8). Exim
+# supports the use of crypt16() as well as crypt() but note the warning below.
+
+# You can always indicate a crypt16-encrypted password by preceding it with
+# "{crypt16}". If you want the default handling (without any preceding
+# indicator) to use crypt16(), uncomment the following line:
+
+# DEFAULT_CRYPT=crypt16
+
+# If you do that, you can still access the basic crypt() function by preceding
+# an encrypted password with "{crypt}". For more details, see the description
+# of the "crypteq" condition in the manual chapter on string expansions.
+
+# Some operating systems do not include a crypt16() function, so Exim has one
+# of its own, which it uses unless HAVE_CRYPT16 is defined. Normally, that will
+# be set in an OS-specific Makefile for the OS that have such a function, so
+# you should not need to bother with it.
+
+# *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING ***
+# It turns out that the above is not entirely accurate. As well as crypt16()
+# there is a function called bigcrypt() that some operating systems have. This
+# may or may not use the same algorithm, and both of them may be different to
+# Exim's built-in crypt16() that is used unless HAVE_CRYPT16 is defined.
+#
+# However, since there is now a move away from the traditional crypt()
+# functions towards using SHA1 and other algorithms, tidying up this area of
+# Exim is seen as very low priority. In practice, if you need to, you can
+# define DEFAULT_CRYPT to the name of any function that has the same interface
+# as the traditional crypt() function.
+# *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING ***
+
+
+#------------------------------------------------------------------------------
+# Exim can be built to support the SMTP STARTTLS command, which implements
+# Transport Layer Security using SSL (Secure Sockets Layer). To do this, you
+# must install the OpenSSL library package or the GnuTLS library. Exim contains
+# no cryptographic code of its own. Uncomment the following lines if you want
+# to build Exim with TLS support. If you don't know what this is all about,
+# leave these settings commented out.
+
+# This setting is required for any TLS support (either OpenSSL or GnuTLS)
+#SUPPORT_TLS=yes
+
+# Uncomment this setting if you are using OpenSSL
+#TLS_LIBS=-lssl -lcrypto
+
+# Test 1 Thales To see if it will work as Slack 12.1 comes with GNUTls
+
+# Uncomment these settings if you are using GnuTLS
+USE_GNUTLS=yes
+TLS_LIBS=-lgnutls -lgcrypt
+
+# If you are running Exim as a server, note that just building it with TLS
+# support is not all you need to do. You also need to set up a suitable
+# certificate, and tell Exim about it by means of the tls_certificate
+# and tls_privatekey run time options. You also need to set tls_advertise_hosts
+# to specify the hosts to which Exim advertises TLS support. On the other hand,
+# if you are running Exim only as a client, building it with TLS support
+# is all you need to do.
+
+# Additional libraries and include files are required for both OpenSSL and
+# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed
+# with all your other libraries. If they are in a special directory, you may
+# need something like
+
+# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
+# or
+# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt
+
+# TLS_LIBS is included only on the command for linking Exim itself, not on any
+# auxiliary programs. If the include files are not in a standard place, you can
+# set TLS_INCLUDE to specify where they are, for example:
+
+# TLS_INCLUDE=-I/usr/local/openssl/include/
+# or
+# TLS_INCLUDE=-I/opt/gnu/include
+
+# You don't need to set TLS_INCLUDE if the relevant directories are already
+# specified in INCLUDE.
+
+
+#------------------------------------------------------------------------------
+# The default distribution of Exim contains only the plain text form of the
+# documentation. Other forms are available separately. If you want to install
+# the documentation in "info" format, first fetch the Texinfo documentation
+# sources from the ftp directory and unpack them, which should create files
+# with the extension "texinfo" in the doc directory. You may find that the
+# version number of the texinfo files is different to your Exim version number,
+# because the main documentation isn't updated as often as the code. For
+# example, if you have Exim version 4.43, the source tarball upacks into a
+# directory called exim-4.43, but the texinfo tarball unpacks into exim-4.40.
+# In this case, move the contents of exim-4.40/doc into exim-4.43/doc after you
+# have unpacked them. Then set INFO_DIRECTORY to the location of your info
+# directory. This varies from system to system, but is often /usr/share/info.
+# Once you have done this, "make install" will build the info files and
+# install them in the directory you have defined.
+
+# INFO_DIRECTORY=/usr/share/info
+
+
+#------------------------------------------------------------------------------
+# Exim log directory and files: Exim creates several log files inside a
+# single log directory. You can define the directory and the form of the
+# log file name here. If you do not set anything, Exim creates a directory
+# called "log" inside its spool directory (see SPOOL_DIRECTORY above) and uses
+# the filenames "mainlog", "paniclog", and "rejectlog". If you want to change
+# this, you can set LOG_FILE_PATH to a path name containing one occurrence of
+# %s. This will be replaced by one of the strings "main", "panic", or "reject"
+# to form the final file names. Some installations may want something like this:
+
+LOG_FILE_PATH=/var/log/exim/%s.log
+
+# which results in files with names /var/log/exim_mainlog, etc. The directory
+# in which the log files are placed must exist; Exim does not try to create
+# it for itself. It is also your responsibility to ensure that Exim is capable
+# of writing files using this path name. The Exim user (see EXIM_USER above)
+# must be able to create and update files in the directory you have specified.
+
+# You can also configure Exim to use syslog, instead of or as well as log
+# files, by settings such as these
+
+# LOG_FILE_PATH=syslog
+# LOG_FILE_PATH=syslog:/var/log/exim_%slog
+
+# The first of these uses only syslog; the second uses syslog and also writes
+# to log files. Do not include white space in such a setting as it messes up
+# the building process.
+
+
+#------------------------------------------------------------------------------
+# When logging to syslog, the following option caters for syslog replacements
+# that are able to accept log entries longer than the 1024 characters allowed
+# by RFC 3164. It is up to you to make sure your syslog daemon can handle this.
+# Non-printable characters are usually unacceptable regardless, so log entries
+# are still split on newline characters.
+
+# SYSLOG_LONG_LINES=yes
+
+# If you are not interested in the process identifier (pid) of the Exim that is
+# making the call to syslog, then comment out the following line.
+
+SYSLOG_LOG_PID=yes
+
+
+#------------------------------------------------------------------------------
+# Cycling log files: this variable specifies the maximum number of old
+# log files that are kept by the exicyclog log-cycling script. You don't have
+# to use exicyclog. If your operating system has other ways of cycling log
+# files, you can use them instead. The exicyclog script isn't run by default;
+# you have to set up a cron job for it if you want it.
+
+EXICYCLOG_MAX=10
+
+
+#------------------------------------------------------------------------------
+# The compress command is used by the exicyclog script to compress old log
+# files. Both the name of the command and the suffix that it adds to files
+# need to be defined here. See also the EXICYCLOG_MAX configuration.
+
+COMPRESS_COMMAND=/usr/bin/gzip
+COMPRESS_SUFFIX=gz
+
+
+#------------------------------------------------------------------------------
+# If the exigrep utility is fed compressed log files, it tries to uncompress
+# them using this command.
+
+ZCAT_COMMAND=/usr/bin/zcat
+
+
+#------------------------------------------------------------------------------
+# Compiling in support for embedded Perl: If you want to be able to
+# use Perl code in Exim's string manipulation language and you have Perl
+# (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded
+# Perl costs quite a lot of resources. Only do this if you really need it.
+
+# EXIM_PERL=perl.o
+
+
+#------------------------------------------------------------------------------
+# Support for dynamically-loaded string expansion functions via ${dlfunc. If
+# you are using gcc the dynamically-loaded object must be compiled with the
+# -shared option, and you will need to add -export-dynamic to EXTRALIBS so
+# that the local_scan API is made available by the linker. You may also need
+# to add -ldl to EXTRALIBS so that dlopen() is available to Exim.
+
+# EXPAND_DLFUNC=yes
+
+
+#------------------------------------------------------------------------------
+# Exim has support for PAM (Pluggable Authentication Modules), a facility
+# which is available in the latest releases of Solaris and in some GNU/Linux
+# distributions (see http://ftp.kernel.org/pub/linux/libs/pam/). The Exim
+# support, which is intended for use in conjunction with the SMTP AUTH
+# facilities, is included only when requested by the following setting:
+
+# SUPPORT_PAM=yes
+
+# You probably need to add -lpam to EXTRALIBS, and in some releases of
+# GNU/Linux -ldl is also needed.
+
+
+#------------------------------------------------------------------------------
+# Support for authentication via Radius is also available. The Exim support,
+# which is intended for use in conjunction with the SMTP AUTH facilities,
+# is included only when requested by setting the following parameter to the
+# location of your Radius configuration file:
+
+# RADIUS_CONFIG_FILE=/etc/radiusclient/radiusclient.conf
+# RADIUS_CONFIG_FILE=/etc/radius.conf
+
+# If you have set RADIUS_CONFIG_FILE, you should also set one of these to
+# indicate which RADIUS library is used:
+
+# RADIUS_LIB_TYPE=RADIUSCLIENT
+# RADIUS_LIB_TYPE=RADIUSCLIENTNEW
+# RADIUS_LIB_TYPE=RADLIB
+
+# RADIUSCLIENT is the radiusclient library; you probably need to add
+#   -lradiusclient to EXTRALIBS.
+#
+# The API for the radiusclient library was changed at release 0.4.0.
+# Unfortunately, the header file does not define a version number that clients
+# can use to support both the old and new APIs. If you are using version 0.4.0
+# or later of the radiusclient library, you should use RADIUSCLIENTNEW.
+#
+# RADLIB is the Radius library that comes with FreeBSD (the header file is
+#   called radlib.h); you probably need to add -lradius to EXTRALIBS.
+#
+# If you do not set RADIUS_LIB_TYPE, Exim assumes the radiusclient library,
+# using the original API.
+
+
+#------------------------------------------------------------------------------
+# Support for authentication via the Cyrus SASL pwcheck daemon is available.
+# Note, however, that pwcheck is now deprecated in favour of saslauthd (see
+# next item). The Exim support for pwcheck, which is intented for use in
+# conjunction with the SMTP AUTH facilities, is included only when requested by
+# setting the following parameter to the location of the pwcheck daemon's
+# socket.
+#
+# There is no need to install all of SASL on your system. You just need to run
+# ./configure --with-pwcheck, cd to the pwcheck directory within the sources,
+# make and make install. You must create the socket directory (default
+# /var/pwcheck) and chown it to exim's user and group. Once you have installed
+# pwcheck, you should arrange for it to be started by root at boot time.
+
+# CYRUS_PWCHECK_SOCKET=/var/pwcheck/pwcheck
+
+
+#------------------------------------------------------------------------------
+# Support for authentication via the Cyrus SASL saslauthd daemon is available.
+# The Exim support, which is intented for use in conjunction with the SMTP AUTH
+# facilities, is included only when requested by setting the following
+# parameter to the location of the saslauthd daemon's socket.
+#
+# There is no need to install all of SASL on your system. You just need to run
+# ./configure --with-saslauthd (and any other options you need, for example, to
+# select or deselect authentication mechanisms), cd to the saslauthd directory
+# within the sources, make and make install. You must create the socket
+# directory (default /var/state/saslauthd) and chown it to exim's user and
+# group. Once you have installed saslauthd, you should arrange for it to be
+# started by root at boot time.
+
+# CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux
+
+
+#------------------------------------------------------------------------------
+# TCP wrappers: If you want to use tcpwrappers from within Exim, uncomment
+# this setting. See the manual section entitled "Use of tcpwrappers" in the
+# chapter on building and installing Exim.
+#
+#USE_TCP_WRAPPERS=yes
+#
+# You may well also have to specify a local "include" file and an additional
+# library for TCP wrappers, so you probably need something like this:
+#
+USE_TCP_WRAPPERS=yes
+CFLAGS=-O -I/usr/include
+EXTRALIBS_EXIM=-lwrap
+#
+# but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM
+# as well.
+
+
+#------------------------------------------------------------------------------
+# The default action of the exim_install script (which is run by "make
+# install") is to install the Exim binary with a unique name such as
+# exim-4.43-1, and then set up a symbolic link called "exim" to reference it,
+# moving the symbolic link from any previous version. If you define NO_SYMLINK
+# (the value doesn't matter), the symbolic link is not created or moved. You
+# will then have to "turn Exim on" by setting up the link manually.
+
+# NO_SYMLINK=yes
+
+
+#------------------------------------------------------------------------------
+# Another default action of the install script is to install a default runtime
+# configuration file if one does not exist. This configuration has a router for
+# expanding system aliases. The default assumes that these aliases are kept
+# in the traditional file called /etc/aliases. If such a file does not exist,
+# the installation script creates one that contains just comments (no actual
+# aliases). The following setting can be changed to specify a different
+# location for the system alias file.
+
+SYSTEM_ALIASES_FILE=/etc/aliases
+
+
+#------------------------------------------------------------------------------
+# There are some testing options (-be, -bt, -bv) that read data from the
+# standard input when no arguments are supplied. By default, the input lines
+# are read using the standard fgets() function. This does not support line
+# editing during interactive input (though the terminal's "erase" character
+# works as normal). If your operating system has the readline() function, and
+# in addition supports dynamic loading of library functions, you can cause
+# Exim to use readline() for the -be testing option (only) by uncommenting the
+# following setting. Dynamic loading is used so that the library is loaded only
+# when the -be testing option is given; by the time the loading occurs,
+# Exim has given up its root privilege and is running as the calling user. This
+# is the reason why readline() is NOT supported for -bt and -bv, because Exim
+# runs as root or as exim, respectively, for those options. When USE_READLINE
+# is "yes", as well as supporting line editing, a history of input lines in the
+# current run is maintained.
+
+# USE_READLINE=yes
+
+# You may need to add -ldl to EXTRALIBS when you set USE_READLINE=yes.
+# Note that this option adds to the size of the Exim binary, because the
+# dynamic loading library is not otherwise included.
+
+
+
+###############################################################################
+#              THINGS YOU ALMOST NEVER NEED TO MENTION                        #
+###############################################################################
+
+# The settings in this section are available for use in special circumstances.
+# In the vast majority of installations you need not change anything below.
+
+
+#------------------------------------------------------------------------------
+# The following commands live in different places in some OS. Either the
+# ultimate default settings, or the OS-specific files should already point to
+# the right place, but they can be overridden here if necessary. These settings
+# are used when building various scripts to ensure that the correct paths are
+# used when the scripts are run. They are not used in the Makefile itself. Perl
+# is not necessary for running Exim unless you set EXIM_PERL (see above) to get
+# it embedded, but there are some utilities that are Perl scripts. If you
+# haven't got Perl, Exim will still build and run; you just won't be able to
+# use those utilities.
+
+# CHOWN_COMMAND=/usr/bin/chown
+# CHGRP_COMMAND=/usr/bin/chgrp
+# MV_COMMAND=/bin/mv
+# RM_COMMAND=/bin/rm
+# PERL_COMMAND=/usr/bin/perl
+
+
+#------------------------------------------------------------------------------
+# The following macro can be used to change the command for building a library
+# of functions. By default the "ar" command is used, with options "cq".
+# Only in rare circumstances should you need to change this.
+
+# AR=ar cq
+
+
+#------------------------------------------------------------------------------
+# In some operating systems, the value of the TMPDIR environment variable
+# controls where temporary files are created. Exim does not make use of
+# temporary files, except when delivering to MBX mailboxes. However, if Exim
+# calls any external libraries (e.g. DBM libraries), they may use temporary
+# files, and thus be influenced by the value of TMPDIR. For this reason, when
+# Exim starts, it checks the environment for TMPDIR, and if it finds it is set,
+# it replaces the value with what is defined here. Commenting this setting
+# suppresses the check altogether.
+
+TMPDIR="/tmp"
+
+
+#------------------------------------------------------------------------------
+# The following macros can be used to change the default modes that are used
+# by the appendfile transport. In most installations the defaults are just
+# fine, and in any case, you can change particular instances of the transport
+# at run time if you want.
+
+# APPENDFILE_MODE=0600
+# APPENDFILE_DIRECTORY_MODE=0700
+# APPENDFILE_LOCKFILE_MODE=0600
+
+
+#------------------------------------------------------------------------------
+# In some installations there may be multiple machines sharing file systems,
+# where a different configuration file is required for Exim on the different
+# machines. If CONFIGURE_FILE_USE_NODE is defined, then Exim will first look
+# for a configuration file whose name is that defined by CONFIGURE_FILE,
+# with the node name obtained by uname() tacked on the end, separated by a
+# period (for example, /usr/exim/configure.host.in.some.domain). If this file
+# does not exist, then the bare configuration file name is tried.
+
+# CONFIGURE_FILE_USE_NODE=yes
+
+
+#------------------------------------------------------------------------------
+# In some esoteric configurations two different versions of Exim are run,
+# with different setuid values, and different configuration files are required
+# to handle the different cases. If CONFIGURE_FILE_USE_EUID is defined, then
+# Exim will first look for a configuration file whose name is that defined
+# by CONFIGURE_FILE, with the effective uid tacked on the end, separated by
+# a period (for eximple, /usr/exim/configure.0). If this file does not exist,
+# then the bare configuration file name is tried. In the case when both
+# CONFIGURE_FILE_USE_EUID and CONFIGURE_FILE_USE_NODE are set, four files
+# are tried: <name>.<euid>.<node>, <name>.<node>, <name>.<euid>, and <name>.
+
+# CONFIGURE_FILE_USE_EUID=yes
+
+
+#------------------------------------------------------------------------------
+# The size of the delivery buffers: These specify the sizes (in bytes) of
+# the buffers that are used when copying a message from the spool to a
+# destination. There is rarely any need to change these values.
+
+# DELIVER_IN_BUFFER_SIZE=8192
+# DELIVER_OUT_BUFFER_SIZE=8192
+
+
+#------------------------------------------------------------------------------
+# The mode of the database directory: Exim creates a directory called "db"
+# in its spool directory, to hold its databases of hints. This variable
+# determines the mode of the created directory. The default value in the
+# source is 0750.
+
+# EXIMDB_DIRECTORY_MODE=0750
+
+
+#------------------------------------------------------------------------------
+# Database file mode: The mode of files created in the "db" directory defaults
+# to 0640 in the source, and can be changed here.
+
+# EXIMDB_MODE=0640
+
+
+#------------------------------------------------------------------------------
+# Database lock file mode: The mode of zero-length files created in the "db"
+# directory to use for locking purposes defaults to 0640 in the source, and
+# can be changed here.
+
+# EXIMDB_LOCKFILE_MODE=0640
+
+
+#------------------------------------------------------------------------------
+# This parameter sets the maximum length of the header portion of a message
+# that Exim is prepared to process. The default setting is one megabyte. The
+# limit exists in order to catch rogue mailers that might connect to your SMTP
+# port, start off a header line, and then just pump junk at it for ever. The
+# message_size_limit option would also catch this, but it may not be set.
+# The value set here is the default; it can be changed at runtime.
+
+# HEADER_MAXSIZE="(1024*1024)"
+
+
+#------------------------------------------------------------------------------
+# The mode of the input directory: The input directory is where messages are
+# kept while awaiting delivery. Exim creates it if necessary, using a mode
+# which can be defined here (default 0750).
+
+# INPUT_DIRECTORY_MODE=0750
+
+
+#------------------------------------------------------------------------------
+# The mode of Exim's log directory, when it is created by Exim inside the spool
+# directory, defaults to 0750 but can be changed here.
+
+# LOG_DIRECTORY_MODE=0750
+
+
+#------------------------------------------------------------------------------
+# The log files themselves are created as required, with a mode that defaults
+# to 0640, but which can be changed here.
+
+# LOG_MODE=0640
+
+
+#------------------------------------------------------------------------------
+# The TESTDB lookup is for performing tests on the handling of lookup results,
+# and is not useful for general running. It should be included only when
+# debugging the code of Exim.
+
+# LOOKUP_TESTDB=yes
+
+
+#------------------------------------------------------------------------------
+# /bin/sh is used by default as the shell in which to run commands that are
+# defined in the makefiles. This can be changed if necessary, by uncommenting
+# this line and specifying another shell, but note that a Bourne-compatible
+# shell is expected.
+
+# MAKE_SHELL=/bin/sh
+
+
+#------------------------------------------------------------------------------
+# The maximum number of named lists of each type (address, domain, host, and
+# local part) can be increased by changing this value. It should be set to
+# a multiple of 16.
+
+# MAX_NAMED_LIST=16
+
+
+#------------------------------------------------------------------------------
+# Network interfaces: Unless you set the local_interfaces option in the runtime
+# configuration file to restrict Exim to certain interfaces only, it will run
+# code to find all the interfaces there are on your host. Unfortunately,
+# the call to the OS that does this requires a buffer large enough to hold
+# data for all the interfaces - it was designed in the days when a host rarely
+# had more than three or four interfaces. Nowadays hosts can have very many
+# virtual interfaces running on the same hardware. If you have more than 250
+# virtual interfaces, you will need to uncomment this setting and increase the
+# value.
+
+# MAXINTERFACES=250
+
+
+#------------------------------------------------------------------------------
+# Per-message logs: While a message is in the process of being delivered,
+# comments on its progress are written to a message log, for the benefit of
+# human administrators. These logs are held in a directory called "msglog"
+# in the spool directory. Its mode defaults to 0750, but can be changed here.
+# The message log directory is also used for storing files that are used by
+# transports for returning data to a message's sender (see the "return_output"
+# option for transports).
+
+# MSGLOG_DIRECTORY_MODE=0750
+
+
+#------------------------------------------------------------------------------
+# There are three options which are used when compiling the Perl interface and
+# when linking with Perl. The default values for these are placed automatically
+# at the head of the Makefile by the script which builds it. However, if you
+# want to override them, you can do so here.
+
+# PERL_CC=
+# PERL_CCOPTS=
+# PERL_LIBS=
+
+
+#------------------------------------------------------------------------------
+# Identifying the daemon: When an Exim daemon starts up, it writes its pid
+# (process id) to a file so that it can easily be identified. The path of the
+# file can be specified here. Some installations may want something like this:
+
+PID_FILE_PATH=/var/run/exim.pid
+
+# If PID_FILE_PATH is not defined, Exim writes a file in its spool directory
+# using the name "exim-daemon.pid".
+
+# If you start up a daemon without the -bd option (for example, with just
+# the -q15m option), a pid file is not written. Also, if you override the
+# configuration file with the -oX option, no pid file is written. In other
+# words, the pid file is written only for a "standard" daemon.
+
+
+#------------------------------------------------------------------------------
+# If Exim creates the spool directory, it is given this mode, defaulting in the
+# source to 0750.
+
+# SPOOL_DIRECTORY_MODE=0750
+
+
+#------------------------------------------------------------------------------
+# The mode of files on the input spool which hold the contents of messages can
+# be changed here. The default is 0640 so that information from the spool is
+# available to anyone who is a member of the Exim group.
+
+# SPOOL_MODE=0640
+
+
+#------------------------------------------------------------------------------
+# Moving frozen messages: If the following is uncommented, Exim is compiled
+# with support for automatically moving frozen messages out of the main spool
+# directory, a facility that is found useful by some large installations. A
+# run time option is required to cause the moving actually to occur. Such
+# messages become "invisible" to the normal management tools.
+
+# SUPPORT_MOVE_FROZEN_MESSAGES=yes
+
+
+#------------------------------------------------------------------------------
+# Disabling the use of fsync(): DO NOT UNCOMMENT THE FOLLOWING LINE unless you
+# really, really, really know what you are doing. And even then, think again.
+# You should never uncomment this when compiling a binary for distribution.
+# Use it only when compiling Exim for your own use.
+#
+# Uncommenting this line enables the use of a runtime option called
+# disable_fsync, which can be used to stop Exim using fsync() to ensure that
+# files are written to disc before proceeding. When this is disabled, crashes
+# and hardware problems such as power outages can cause data to be lost. This
+# feature should only be used in very exceptional circumstances. YOU HAVE BEEN
+# WARNED.
+
+# ENABLE_DISABLE_FSYNC=yes
+
+# End of EDITME for Exim 4.
diff --git a/network/exim/exim.SlackBuild b/network/exim/exim.SlackBuild
new file mode 100644
index 000000000000..3c2dd64f1062
--- /dev/null
+++ b/network/exim/exim.SlackBuild
@@ -0,0 +1,123 @@
+#!/bin/sh
+
+# Slackware build script for Exim 
+# http://www.exim.org/
+# Copyright 2008  Thales A. Tsailas (ttsailas@enforcingit.com)
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# *Extensively* edited by the SlackBuilds.org project. -michiel.
+
+PRGNAM=exim
+VERSION=4.69
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+EXIMUSER=${EXIMUSER:-exim}
+EXIMGROUP=${EXIMGROUP:-exim}
+EXIMUID=${EXIMUID:-222}
+EXIMGID=${EXIMGID:-222}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+fi
+
+# Exit on most errors
+set -e 
+
+# Check if the exim and user group exist. If not, then bail
+if ! grep ^${EXIMGROUP}: /etc/group 2>&1 > /dev/null; then
+cat << EOF
+
+  You must have a ${EXIMGROUP} group to run this script.
+  For example: groupadd -g ${EXIMGID} ${EXIMGROUP}
+
+EOF
+  exit
+elif ! grep ^${EXIMUSER}: /etc/passwd 2>&1 > /dev/null; then
+  cat << EOF
+
+  You must have a ${EXIMUSER} user to run this script.
+  For example: useradd -u ${EXIMUID} -d /var/spool/exim -s /bin/false -g ${EXIMGROUP} ${EXIMUSER}
+
+EOF
+  exit
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Set the right compiler flags and settings.
+# Edit {exim,eximon.Makefile} if you want to change any of these.
+sed -e "s/#SLKCFLAGS#/$SLKCFLAGS/" $CWD/exim.Makefile > $TMP/$PRGNAM-$VERSION/Local/Makefile
+sed -e "s/#SLKCFLAGS#/$SLKCFLAGS/" $CWD/eximon.Makefile > $TMP/$PRGNAM-$VERSION/Local/eximon.conf
+
+make all 
+make install DESTDIR=$PKG
+
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+mkdir -p  $PKG/usr/man/man8
+cat doc/$PRGNAM.8 > $PKG/usr/man/man8/$PRGNAM.8
+gzip -9 $PKG/usr/man/man8/$PRGNAM.8
+
+mkdir -p $PKG/etc/{logrotate.d,rc.d}
+cat $CWD/rc.exim.new > $PKG/etc/rc.d/rc.exim.new
+cat $CWD/$PRGNAM.logrotate > $PKG/etc/logrotate.d/$PRGNAM
+mv $PKG/etc/exim/exim.conf $PKG/etc/exim/exim.conf.new
+mv $PKG/etc/aliases $PKG/etc/aliases.new
+
+mkdir -p  $PKG/var/log/exim
+mkdir -p -m 0750 $PKG/var/spool/exim/
+mkdir -p -m 0750 $PKG/var/spool/exim/{db,input,msglog}
+chown -R $EXIMUSER:$EXIMGROUP $PKG/var/{log,spool}/exim
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION 
+cp -a ABOUT ACKNOWLEDGMENTS LICENCE CHANGES doc/* $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/network/exim/exim.info b/network/exim/exim.info
new file mode 100644
index 000000000000..e502cf107d3f
--- /dev/null
+++ b/network/exim/exim.info
@@ -0,0 +1,8 @@
+PRGNAM="exim"
+VERSION="4.69"
+HOMEPAGE="http://www.exim.org/"
+DOWNLOAD="ftp://ftp.exim.org/pub/exim/exim4/exim-4.69.tar.gz"
+MD5SUM="56e8db1dfe31e0ee4cef85e8940ceedc"
+MAINTAINER="Thales A. Tsailas"
+EMAIL="ttsailas@enforcingit.com"
+APPROVED="michiel"
diff --git a/network/exim/exim.logrotate b/network/exim/exim.logrotate
new file mode 100644
index 000000000000..4e83629e2cd6
--- /dev/null
+++ b/network/exim/exim.logrotate
@@ -0,0 +1,7 @@
+# daemon does not need restarting after log rotate 
+/var/log/exim/*log {
+  missingok
+  notifempty
+  delaycompress
+}
+
diff --git a/network/exim/eximon.Makefile b/network/exim/eximon.Makefile
new file mode 100644
index 000000000000..8560ea7c4b0f
--- /dev/null
+++ b/network/exim/eximon.Makefile
@@ -0,0 +1,182 @@
+# $Cambridge: exim/exim-src/exim_monitor/EDITME,v 1.1 2004/10/07 10:39:01 ph10 Exp $
+
+##################################################
+#                The Exim Monitor                #
+##################################################
+
+# This is the template for the Exim monitor's main build-time configuration
+# file. It contains settings that are independent of any operating system. It
+# should be edited and then saved to a file called Local/eximon.conf before
+# running the make command to build the monitor, if any settings are required.
+# Local/eximon.conf can be empty if no changes are needed. The examples given
+# here (commented out) are the default settings.
+
+# Any settings made in the configuration file can be overridden at run time
+# by setting up an environment variable with the same name as any of these
+# options, but preceded by EXIMON_, for example, EXIMON_WINDOW_TITLE.
+
+CFLAGS="##SLKCFLAGS#"
+
+##################################################################
+#      Set these variables as appropriate for your system        #
+##################################################################
+
+# The qualifying name for your domain. The only use made of this is for
+# testing that certain addresses are the same when displaying the
+# log tail, and for shortening sender addresses in the queue display.
+
+# QUALIFY_DOMAIN=
+
+# The default minimum width and height for the whole window are 103 and
+# 162 pixels respectively. This is enough to hold the left-most stripchart
+# and the quit button. The values can be changed here.
+
+# MIN_HEIGHT=162
+# MIN_WIDTH=103
+
+# If you uncomment the following setting, the window will start up at
+# its minimum size, instead of the default maximum. There may be a quick
+# flash during the start-up process. Defining it this way allows it to be
+# overridden by an environment variable.
+
+# START_SMALL=${EXIMON_START_SMALL-yes}
+
+# The title for eximon's main display window. It is possible to have
+# host name of the machine you are running on substituted into the
+# title string. If you include the string ${fullhostname} then the
+# complete name is used. If you include ${hostname} then the full
+# host name will have the string contained in the DOMAIN variable
+# stripped from its right-hand end before being substituted. Any other
+# shell or environment variables may also be included.
+
+# If you use any substitutions, remember to ensure that the $ and {}
+# characters are escaped from the shell, e.g. by using single quotes.
+
+# WINDOW_TITLE="${hostname} eximon"
+
+# The domain that you want to be stripped from the machine's full hostname
+# when forming the short host name for the eximon window title, as
+# described above.
+
+# DOMAIN=
+
+# Parameters for the rolling display of the tail of the exim log file.
+# The width and depth are measured in pixels; LOG_BUFFER specifies the
+# amount of store to set aside for holding the log tail, which is displayed
+# in a scrolling window. When this store is full, the earlier 50% of it
+# is discarded - this is much more efficient that throwing it away line
+# by line. The number given can be followed by the letter K to indicate
+# that the value is in kilobytes. A minimum value of 1K is enforced.
+
+# LOG_DEPTH=300
+# LOG_WIDTH=950
+# LOG_BUFFER=20K
+
+# The font which is used in the log tail display. This is defined in
+# the normal X manner. It must be a "character cell" font, because this
+# is required by the text widget.
+
+# LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
+
+# Parameters for the display of message that are on the exim queue.
+# The width and depth are measured in pixels.
+
+# QUEUE_DEPTH=200
+# QUEUE_WIDTH=950
+
+# The font which is used in the queue display.
+
+# QUEUE_FONT=$LOG_FONT
+
+# When a message has more than one undelivered address, they are listed
+# one below the other. A limit can be placed on the number of addresses
+# displayed for any one message. If there are more, then "..." is used
+# to indicate this.
+
+# QUEUE_MAX_ADDRESSES=10
+
+# The display of the contents of the queue is updated every QUEUE_INTERVAL
+# seconds by default (there is a button to request update).
+
+# QUEUE_INTERVAL=300
+
+# The size of the popup text window that is used for looking at the
+# contents of messages, etc.
+
+# TEXT_DEPTH=200
+
+# The keystroke/mouse-operation that is used to pop up the menu in the
+# queue window is configurable. The default is Shift with the lefthand
+# mouse button. The name of an alternative can be specified in the standard
+# X way of naming these things. With the default configuration for the monitor,
+# individuals can override this by setting the EXIMON_MENU_EVENT environment
+# variable.
+
+# MENU_EVENT='Shift<Btn1Down>'
+
+# When the menu is used to perform an operation on a message, the result of the
+# operation is normally visible in the log window, so Eximon doesn't display
+# the output of the generated Exim command. However, you can request that
+# this output be shown in a separate window by setting ACTION_OUTPUT to "yes".
+# This does not apply to the output generated from attempting to deliver a
+# message, which is always shown.
+
+# ACTION_OUTPUT=no
+
+# When some action is taken on a message, such as freezing it, or changing
+# its recipients, the queue display is normally automatically updated. On
+# systems that have very large queues, this can take some time and be dis-
+# tracting. If this option is set to "no", the queue display is no longer
+# automatically updated after an action is applied to a message.
+
+# ACTION_QUEUE_UPDATE=yes
+
+# When the menu item to display a message's body is invoked, the amount
+# of data is limited to BODY_MAX bytes. This limit is a safety precaution
+# to save the screen scrolling for ever on an enormous message.
+
+# BODY_MAX=20000
+
+# The stripcharts are updated every STRIPCHART_INTERVAL seconds.
+
+# STRIPCHART_INTERVAL=60
+
+# A stripchart showing the count of messages in the queue is always
+# displayed on the left of eximon's window. Its name is "queue" by
+# default, but can be changed by this variable.
+
+# QUEUE_STRIPCHART_NAME=queue
+
+# The following variable may be set to the name of a disc partition. If
+# it is, a stripchart showing the percentage fullness of the partition
+# will be displayed as the second stripchart. This can be used to keep
+# a display of a mail spool partition on the screen.
+
+# SIZE_STRIPCHART=/var/mail
+
+# The name of the size stripchart will be the last component of SIZE_STRIPCHART
+# unless the following variable is set to override it.
+
+# SIZE_STRIPCHART_NAME=space
+
+# The following variable contains a specification of which stripcharts
+# you want eximon to display based on log entries. The string consists of
+# pairs of strings, delimited by slash characters. The first string in each
+# pair is a regular expression that matches some distinguishing feature in a
+# exim log entry.
+
+# Entries that match the expression will be counted and displayed in a
+# stripchart whose title is given by the second string. The string may
+# be continued over several input lines, provided that it is split
+# after a slash, and an additional slash (optionally preceded by white
+# space) is included at the start of the continuation line.
+
+# Stripcharts configured by the following parameter are displayed to the
+# right of the queue and size stripcharts, in the order defined here.
+
+# LOG_STRIPCHARTS='/ <= /in/
+#                  / => /out/
+#                  / => .+ R=local/local/
+#                  / => .+ T=[^ ]*smtp/smtp/'
+
+# End of exim_monitor/EDITME
diff --git a/network/exim/rc.exim.new b/network/exim/rc.exim.new
new file mode 100644
index 000000000000..4902203dfb90
--- /dev/null
+++ b/network/exim/rc.exim.new
@@ -0,0 +1,61 @@
+#!/bin/sh
+
+# /etc/rc.d/rc.exim - start/stop/restart the exim mail transfer agent.
+# To make exim start automatically at boot, make this
+# file executable: chmod 755 /etc/rc.d/rc.exim
+#
+# Thales A. Tsailas <ttsailas@enforcingit.com>
+
+PIDFILE=/var/run/exim.pid
+
+# the TIME option causes Exim to run as a daemon, starting a queue runner 
+# process at intervals specified by the given time value. (ie 5m, 1h etc).
+TIME=15m
+
+exim_start() {
+    # Make sure that we have the right ownerships permissions.
+    if [ -f /var/log/exim/main.log ]; then
+        if [ "exim" != "$(/bin/stat -c%G /var/log/exim/main.log)" ]; then
+            chown -R exim:exim /var/{log,spool}/exim
+        fi
+    fi
+    
+    # Lets start the Exim daemon
+    echo -en "Starting exim... \n"
+    /usr/sbin/exim -bd -q$TIME
+}
+
+exim_stop() {
+    echo -en "Shutting down exim...\n"
+    killall exim
+    rm -f $PIDFILE
+}
+
+exim_status() {
+    if [ -f /var/run/exim.pid ]; then
+        echo "exim (pid: $(cat $PIDFILE) is running...";
+    else 
+        echo "exim is not running...";
+    fi
+}
+
+# See how we were called.
+case "$1" in
+  start)
+    exim_start
+    ;;
+  stop)
+    exim_stop
+    ;;
+  restart)
+    exim_stop
+    sleep 2
+    exim_start
+    ;;
+  status)
+    status 
+    ;;
+  *)
+    echo $"Usage: $0 {start|stop|restart|status}"
+    exit 1
+esac
diff --git a/network/exim/slack-desc b/network/exim/slack-desc
new file mode 100644
index 000000000000..c9cc9d3ae59b
--- /dev/null
+++ b/network/exim/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+exim: exim (the exim mail transfer agent)
+exim:
+exim: Exim is a mail transfer agent (MTA) used on Unix-like operating systems.
+exim: It is freely available under the GNU GPL and it aims to be a general
+exim: and flexible mailer with extensive facilities for checking incoming
+exim: e-mail. Exim was written by Philip Hazel for use in the University of 
+exim: Cambridge Computing Service’s e-mail systems.
+exim:
+exim:
+exim: Homepage:  http://www.exim.org/
+exim: