network/exim: Updated for version 4.93.

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

4 files changed, 145 insertions, 91 deletions

diff --git a/network/exim/README.SBo b/network/exim/README.SBo
index d2da77c32bec7..b72f41afb405b 100644
--- a/network/exim/README.SBo
+++ b/network/exim/README.SBo
@@ -15,6 +15,7 @@ The database lookups will not be built by default, but you can enable
 them easily by passing the directives on the command line when calling
 this script, e.g.
 
+  LOOKUP_JSON=yes \
   LOOKUP_LDAP=yes \
   LOOKUP_MYSQL=yes \
   LOOKUP_PGSQL=yes \
@@ -22,8 +23,9 @@ this script, e.g.
   LOOKUP_SQLITE=yes \
   sh exim.SlackBuild
 
-For including the Redis and PostgreSQL lookups you'll need the "hiredis"
-resp. "postgresql" packages, both available from SlackBuilds.org.
+For including the JSON, PostgreSQL and Redis lookups you'll need the
+"jansson", "hiredis" and "postgresql" packages respectively, all available
+from SlackBuilds.org.
 
 WARNING: this package is intended as a drop-in replacement for Sendmail.
 As a result, there are some inevitable filename conflicts between
diff --git a/network/exim/exim.Makefile b/network/exim/exim.Makefile
index db91d5526e47e..3479dc2b45264 100644
--- a/network/exim/exim.Makefile
+++ b/network/exim/exim.Makefile
@@ -12,11 +12,13 @@
 # Exim distribution directory before running the "make" command.
 
 # Things that depend on the operating system have default settings in
-# OS/Makefile-Default, but these are overridden for some OS by files called
-# called OS/Makefile-<osname>. You can further override these by creating files
-# called Local/Makefile-<osname>, where "<osname>" stands for the name of your
-# operating system - look at the names in the OS directory to see which names
-# are recognized.
+# OS/Makefile-Default, but these are overridden for some OS by files
+# called called OS/Makefile-<osname>. You can further override these by
+# creating files called Local/Makefile-<osname>, and
+# Local/Makefile-<buildname> (where "<osname>" stands for the name of
+# your operating system - look at the names in the OS directory to see
+# which names are recognized, and "<buildname>" is derived from the
+# environment variable "build")
 
 # However, if you are building Exim for a single OS only, you don't need to
 # worry about setting up Local/Makefile-<osname>. Any build-time configuration
@@ -178,6 +180,105 @@ SPOOL_DIRECTORY=/var/spool/exim
 
 
 ###############################################################################
+#                            TLS                                              #
+###############################################################################
+# Exim is built by default to support the SMTP STARTTLS command, which implements
+# Transport Layer Security using SSL (Secure Sockets Layer). This requires you
+# must install the OpenSSL library package or the GnuTLS library. Exim contains
+# no cryptographic code of its own.
+
+# If you are running Exim as a (TLS) server, just building it with TLS support
+# is all you need to do, as tls_advertise_hosts is set to '*' by
+# default. But you are advised to create a suiteable certificate, and tell
+# Exim about it by means of the tls_certificate and tls_privatekey run
+# time options, otherwise Exim will create a self signed certificate on
+# the fly.  If you are running Exim only as a (TLS) client, building it with
+# TLS support is all you need to do.
+#
+# If you are using pkg-config then you should not need to worry where
+# the libraries and headers are installed, as the pkg-config .pc
+# specification should include all -L/-I information necessary.
+# Enabling the USE_*_PC options should be sufficient. If not using
+# pkg-config, then you have to specify the libraries, and you mmight
+# need to specify the locations too.
+
+# Uncomment the following lines if you want
+# to build Exim without any TLS support (either OpenSSL or GnuTLS):
+# DISABLE_TLS=yes
+# Unless you do this, you must define one of USE_OPENSSL or USE_GNUTLS
+# below.
+
+# If you are buliding with TLS, the library configuration must be done:
+
+# Uncomment this if you are using OpenSSL
+USE_OPENSSL=yes
+# Uncomment one of these settings if you are using OpenSSL; pkg-config vs not
+# and an optional location.
+USE_OPENSSL_PC=openssl
+# TLS_LIBS=-lssl -lcrypto
+# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
+
+# Uncomment this if you are using GnuTLS
+# USE_GNUTLS=yes
+# Uncomment one of these settings if you are using GnuTLS; pkg-config vs not
+# and an optional location. If you disable SUPPORT_DANE below, you
+# can remove the gnutls-dane references here.  Earlier versions of GnuTLS
+# required libtasn1 and libgrypt also; add if needed.
+# USE_GNUTLS_PC=gnutls gnutls-dane
+# TLS_LIBS=-lgnutls -lgnutls-dane
+# TLS_LIBS=-L/usr/local/gnu/lib -lgnutls -ltasn1 -lgcrypt -lgnutls-dane
+
+# If using GnuTLS older than 2.10 and using pkg-config then note that Exim's
+# build process will require libgcrypt-config to exist in your $PATH.  A
+# version that old is likely to become unsupported by Exim in 2017.
+
+# The security fix we provide with the gnutls_allow_auto_pkcs11 option
+# (4.82 PP/09) introduces a compatibility regression.  The symbol is
+# not available if GnuTLS is build without p11-kit (--without-p11-kit
+# configure option).  In this case use AVOID_GNUTLS_PKCS11=yes when
+# building Exim.
+# AVOID_GNUTLS_PKCS11=yes
+
+# If you are running Exim as a server, note that just building it with TLS
+# support is not all you need to do. You also need to set up a suitable
+# certificate, and tell Exim about it by means of the tls_certificate
+# and tls_privatekey run time options. You also need to set tls_advertise_hosts
+# to specify the hosts to which Exim advertises TLS support. On the other hand,
+# if you are running Exim only as a client, building it with TLS support
+# is all you need to do.
+
+# If you are using pkg-config then you should not need to worry where the
+# libraries and headers are installed, as the pkg-config .pc specification
+# should include all -L/-I information necessary.  If not using pkg-config
+# then you might need to specify the locations too.
+
+# Additional libraries and include files are required for both OpenSSL and
+# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed
+# with all your other libraries. If they are in a special directory, you may
+# need something like
+
+# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
+
+# or
+
+# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt -lgnutls-dane
+# If not using DANE under GnuTLS we can lose one library
+# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt
+
+# TLS_LIBS is included only on the command for linking Exim itself, not on any
+# auxiliary programs. If the include files are not in a standard place, you can
+# set TLS_INCLUDE to specify where they are, for example:
+
+# TLS_INCLUDE=-I/usr/local/openssl/include/
+# or
+# TLS_INCLUDE=-I/opt/gnu/include
+
+# You don't need to set TLS_INCLUDE if the relevant directories are already
+# specified in INCLUDE.
+
+
+
+###############################################################################
 #           THESE ARE THINGS YOU PROBABLY WANT TO SPECIFY                     #
 ###############################################################################
 
@@ -309,6 +410,8 @@ LOOKUP_DNSDB=yes
 LOOKUP_CDB=yes
 LOOKUP_DSEARCH=yes
 # LOOKUP_IBASE=yes
+# LOOKUP_JSON=yes
+LOOKUP_JSON_PC=jansson
 # LOOKUP_LDAP=yes
 # LOOKUP_MYSQL=yes
 # LOOKUP_MYSQL_PC=mariadb
@@ -332,6 +435,9 @@ LOOKUP_SQLITE_PC=sqlite3
 # LOOKUP_NWILDLSEARCH=yes
 
 
+# Some platforms may need this for LOOKUP_NIS:
+# LIBS += -lnsl
+
 #------------------------------------------------------------------------------
 # If you have set LOOKUP_LDAP=yes, you should set LDAP_LIB_TYPE to indicate
 # which LDAP library you have. Unfortunately, though most of their functions
@@ -366,9 +472,11 @@ PCRE_CONFIG=yes
 
 
 #------------------------------------------------------------------------------
-# Uncomment the following line to add DANE support
+# Comment out the following line to remove DANE support
 # Note: Enabling this unconditionally overrides DISABLE_DNSSEC
-# For DANE under GnuTLS we need an additional library.  See TLS_LIBS below.
+# forces you to have SUPPORT_TLS enabled (the default).  For DANE under
+# GnuTLS we need an additional library.  See TLS_LIBS or USE_GNUTLS_PC
+# below.
 SUPPORT_DANE=yes
 
 #------------------------------------------------------------------------------
@@ -378,7 +486,7 @@ SUPPORT_DANE=yes
 # don't need to set LOOKUP_INCLUDE if the relevant directories are already
 # specified in INCLUDE. The settings below are just examples; -lpq is for
 # PostgreSQL, -lgds is for Interbase, -lsqlite3 is for SQLite, -lhiredis
-# is for Redis.
+# is for Redis, -ljansson for JSON.
 #
 # You do not need to use this for any lookup information added via pkg-config.
 
@@ -396,10 +504,11 @@ LOOKUP_INCLUDE+=-I/usr/include/mysql
 LOOKUP_LIBS+=-L/usr/lib$(LIBDIRSUFFIX)/mysql -lmysqlclient
 endif
 
+
 #------------------------------------------------------------------------------
 # Compiling the Exim monitor: If you want to compile the Exim monitor, a
 # program that requires an X11 display, then EXIM_MONITOR should be set to the
-# value "eximon.bin". Comment out this setting to disable compilation of the
+# value "eximon.bin". De-comment this setting to enable compilation of the
 # monitor. The locations of various X11 directories for libraries and include
 # files are defaulted in the OS/Makefile-Default file, but can be overridden in
 # local OS-specific make files.
@@ -470,6 +579,11 @@ DISABLE_MAL_MKS=yes
 # DISABLE_EVENT=yes
 
 
+# Uncomment this line to include support for early pipelining, per
+# https://datatracker.ietf.org/doc/draft-harris-early-pipe/
+# SUPPORT_PIPE_CONNECT=yes
+
+
 #------------------------------------------------------------------------------
 # Compiling Exim with experimental features. These are documented in
 # experimental-spec.txt. "Experimental" means that the way these features are
@@ -492,10 +606,12 @@ DISABLE_MAL_MKS=yes
 
 # Uncomment the following line to add DMARC checking capability, implemented
 # using libopendmarc libraries. You must have SPF and DKIM support enabled also.
-# EXPERIMENTAL_DMARC=yes
-# DMARC_TLD_FILE= /etc/exim/opendmarc.tlds
+# SUPPORT_DMARC=yes
 # CFLAGS += -I/usr/local/include
 # LDFLAGS += -lopendmarc
+# Uncomment the following if you need to change the default. You can
+# override it at runtime (main config option dmarc_tld_file)
+# DMARC_TLD_FILE=/etc/exim/opendmarc.tlds
 
 # Uncomment the following line to add ARC (Authenticated Received Chain)
 # support.  You must have SPF and DKIM support enabled also.
@@ -523,10 +639,8 @@ DISABLE_MAL_MKS=yes
 # Uncomment the following line to add queuefile transport support
 # EXPERIMENTAL_QUEUEFILE=yes
 
-# Uncomment the following to add REQUIRETLS support.
-# You must also have SUPPORT_TLS enabled.
-# Ref: https://datatracker.ietf.org/doc/draft-fenton-smtp-require-tls
-# EXPERIMENTAL_REQUIRETLS=yes
+# Uncomment the following line to include support for TLS Resumption
+# EXPERIMENTAL_TLS_RESUME=yes
 
 ###############################################################################
 #                 THESE ARE THINGS YOU MIGHT WANT TO SPECIFY                  #
@@ -655,6 +769,7 @@ FIXED_NEVER_USERS=root
 AUTH_CRAM_MD5=yes
 AUTH_CYRUS_SASL=yes
 AUTH_DOVECOT=yes
+AUTH_EXTERNAL=yes
 # AUTH_GSASL=yes
 # AUTH_GSASL_PC=libgsasl
 # AUTH_HEIMDAL_GSSAPI=yes
@@ -668,7 +783,6 @@ AUTH_TLS=yes
 # requires multiple pkg-config files to work with Exim, so the second example
 # above is needed.
 
-
 #------------------------------------------------------------------------------
 # If you specified AUTH_CYRUS_SASL above, you should ensure that you have the
 # Cyrus SASL library installed before trying to build Exim, and you probably
@@ -768,75 +882,6 @@ HEADERS_CHARSET="ISO-8859-1"
 
 
 #------------------------------------------------------------------------------
-# Exim can be built to support the SMTP STARTTLS command, which implements
-# Transport Layer Security using SSL (Secure Sockets Layer). To do this, you
-# must install the OpenSSL library package or the GnuTLS library. Exim contains
-# no cryptographic code of its own. Uncomment the following lines if you want
-# to build Exim with TLS support. If you don't know what this is all about,
-# leave these settings commented out.
-
-# This setting is required for any TLS support (either OpenSSL or GnuTLS)
-SUPPORT_TLS=yes
-
-# Uncomment one of these settings if you are using OpenSSL; pkg-config vs not
-USE_OPENSSL_PC=openssl
-# TLS_LIBS=-lssl -lcrypto
-
-# Uncomment the first and either the second or the third of these if you
-# are using GnuTLS.  If you have pkg-config, then the second, else the third.
-# USE_GNUTLS=yes
-# USE_GNUTLS_PC=gnutls
-# TLS_LIBS=-lgnutls -ltasn1 -lgcrypt
-
-# If using GnuTLS older than 2.10 and using pkg-config then note that Exim's
-# build process will require libgcrypt-config to exist in your $PATH.  A
-# version that old is likely to become unsupported by Exim in 2017.
-
-# The security fix we provide with the gnutls_allow_auto_pkcs11 option
-# (4.82 PP/09) introduces a compatibility regression.  The symbol is
-# not available if GnuTLS is build without p11-kit (--without-p11-kit
-# configure option).  In this case use AVOID_GNUTLS_PKCS11=yes when
-# building Exim.
-# AVOID_GNUTLS_PKCS11=yes
-
-# If you are running Exim as a server, note that just building it with TLS
-# support is not all you need to do. You also need to set up a suitable
-# certificate, and tell Exim about it by means of the tls_certificate
-# and tls_privatekey run time options. You also need to set tls_advertise_hosts
-# to specify the hosts to which Exim advertises TLS support. On the other hand,
-# if you are running Exim only as a client, building it with TLS support
-# is all you need to do.
-
-# If you are using pkg-config then you should not need to worry where the
-# libraries and headers are installed, as the pkg-config .pc specification
-# should include all -L/-I information necessary.  If not using pkg-config
-# then you might need to specify the locations too.
-
-# Additional libraries and include files are required for both OpenSSL and
-# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed
-# with all your other libraries. If they are in a special directory, you may
-# need something like
-
-# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
-# or
-# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt
-
-# For DANE under GnuTLS we need an additional library.
-# TLS_LIBS += -lgnutls-dane
-
-# TLS_LIBS is included only on the command for linking Exim itself, not on any
-# auxiliary programs. If the include files are not in a standard place, you can
-# set TLS_INCLUDE to specify where they are, for example:
-
-# TLS_INCLUDE=-I/usr/local/openssl/include/
-# or
-# TLS_INCLUDE=-I/opt/gnu/include
-
-# You don't need to set TLS_INCLUDE if the relevant directories are already
-# specified in INCLUDE.
-
-
-#------------------------------------------------------------------------------
 # The default distribution of Exim contains only the plain text form of the
 # documentation. Other forms are available separately. If you want to install
 # the documentation in "info" format, first fetch the Texinfo documentation
@@ -1450,4 +1495,8 @@ PID_FILE_PATH=/var/run/exim.pid
 
 # ENABLE_DISABLE_FSYNC=yes
 
+#------------------------------------------------------------------------------
+# For development, add this to include code to time various stages and report.
+# CFLAGS += -DMEASURE_TIMING
+
 # End of EDITME for Exim 4.
diff --git a/network/exim/exim.SlackBuild b/network/exim/exim.SlackBuild
index 9e5204563f487..889c6d34e0240 100644
--- a/network/exim/exim.SlackBuild
+++ b/network/exim/exim.SlackBuild
@@ -23,7 +23,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=exim
-VERSION=${VERSION:-4.92.3}
+VERSION=${VERSION:-4.93}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
@@ -128,5 +128,8 @@ mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 cat $CWD/doinst.sh > $PKG/install/doinst.sh
 
+# Adjust version info for release candidates.
+VERSION=${VERSION/-/_}
+
 cd $PKG
 /sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/exim/exim.info b/network/exim/exim.info
index 1d6c1be9cdfcc..a20827bb05615 100644
--- a/network/exim/exim.info
+++ b/network/exim/exim.info
@@ -1,8 +1,8 @@
 PRGNAM="exim"
-VERSION="4.92.3"
+VERSION="4.93"
 HOMEPAGE="https://www.exim.org/"
-DOWNLOAD="https://ftp.exim.org/pub/exim/exim4/exim-4.92.3.tar.xz"
-MD5SUM="9be05c609af824ce19666e31d910cefd"
+DOWNLOAD="https://ftp.exim.org/pub/exim/exim4/exim-4.93.tar.xz"
+MD5SUM="60aa3b38844a8ccece06670e8ff7d657"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 REQUIRES="%README%"