network/exim: Updated for version 4.74.

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

4 files changed, 118 insertions, 80 deletions

diff --git a/network/exim/contrib/rc.exim.new b/network/exim/contrib/rc.exim.new
index 16d1ca71d0ba4..3fb62f1bf3ad0 100644
--- a/network/exim/contrib/rc.exim.new
+++ b/network/exim/contrib/rc.exim.new
@@ -1,62 +1,28 @@
 #!/bin/sh
+# Start/stop/restart the Exim MTA
 
-# /etc/rc.d/rc.exim - start/stop/restart the exim mail transfer agent.
-#
-# Thales A. Tsailas <ttsailas@enforcingit.com>
-# Thomas Morper <thomas@beingboiled.info>
+# Run as SMTP listener daemon, do queue runs every 15 mins.
+EXIM_ARGS="-bd -q15m"
 
-PIDFILE=/var/run/exim.pid
-
-# the TIME option causes Exim to run as a daemon, starting a queue runner 
-# process at intervals specified by the given time value. (ie 5m, 1h etc).
-TIME=15m
-
-exim_start() {
-  echo "Starting exim..."
-  /usr/sbin/exim -bd ${TIME:+-q$TIME}
-}
-
-exim_stop() {
-  echo "Shutting down exim..."
-  killall exim
-  rm -f $PIDFILE
-}
-
-exim_reload() {
-  echo "Reloading exim configuration..."
-  if [ -f $PIDFILE ]; then
-    kill -HUP $(cat $PIDFILE)
-  fi
-}
-
-exim_status() {
-  if [ -f /var/run/exim.pid ]; then
-    echo "exim is running...";
-  else 
-    echo "exim is not running...";
-  fi
-}
-
-# See how we were called.
 case "$1" in
   start)
-    exim_start
+    echo "Starting Exim"
+    /usr/sbin/exim $EXIM_ARGS
     ;;
   stop)
-    exim_stop
-    ;;
-  restart)
-    exim_stop
-    sleep 2
-    exim_start
+    echo "Stopping Exim"
+    pkill -f /usr/sbin/exim
     ;;
   reload)
-    exim_reload
+    echo "Reloading Exim config"
+    pkill -HUP -f /usr/sbin/exim
     ;;
-  status)
-    exim_status 
+  restart)
+    $0 stop
+    sleep 2
+    $0 start
     ;;
   *)
-    echo $"Usage: $0 {start|stop|restart|reload|status}"
+    echo "usage: $0 {start|stop|reload|restart}"
     ;;
 esac
diff --git a/network/exim/exim.Makefile b/network/exim/exim.Makefile
index 2dccce152c6e3..1da52718f67bf 100644
--- a/network/exim/exim.Makefile
+++ b/network/exim/exim.Makefile
@@ -1,4 +1,4 @@
-# $Cambridge: exim/exim-src/src/EDITME,v 1.23 2009/11/20 12:18:19 nm4 Exp $
+# $Cambridge: exim/src/src/EDITME,v 1.27 2010/06/12 15:21:25 jetmore Exp $
 
 ##################################################
 #          The Exim mail transport agent         #
@@ -131,8 +131,7 @@ CONFIGURE_FILE=/etc/exim/exim.conf
 # group that is used for Exim processes when they no longer need to be root. In
 # particular, this applies when receiving messages and when doing remote
 # deliveries. (Local deliveries run as various non-root users, typically as the
-# owner of a local mailbox.) Specifying these values as root is very strongly
-# discouraged.
+# owner of a local mailbox.) Specifying these values as root is not supported.
 
 EXIM_USER=exim
 
@@ -250,6 +249,19 @@ SUPPORT_MBX=yes
 
 
 #------------------------------------------------------------------------------
+# See below for dynamic lookup modules.
+# LOOKUP_MODULE_DIR=/usr/lib/exim/lookups/
+# If not using package management but using this anyway, then think about how
+# you perform upgrades and revert them. You should consider the benefit of
+# embedding the Exim version number into LOOKUP_MODULE_DIR, so that you can
+# maintain two concurrent sets of modules.
+
+# To build a module dynamically, you'll need to define CFLAGS_DYNAMIC for
+# your platform.  Eg:
+# CFLAGS_DYNAMIC=-shared -rdynamic
+# CFLAGS_DYNAMIC=-shared -rdynamic -fPIC
+
+#------------------------------------------------------------------------------
 # These settings determine which file and database lookup methods are included
 # in the binary. See the manual chapter entitled "File and database lookups"
 # for discussion. DBM and lsearch (linear search) are included by default. If
@@ -257,6 +269,18 @@ SUPPORT_MBX=yes
 # LOOKUP_DNSDB does *not* refer to general mail routing using the DNS. It is
 # for the specialist case of using the DNS as a general database facility (not
 # common).
+# If set to "2" instead of "yes" then the corresponding lookup will be
+# built as a module and must be installed into LOOKUP_MODULE_DIR. You need to
+# add -export-dynamic -rdynamic to EXTRALIBS. You may also need to add -ldl to
+# EXTRALIBS so that dlopen() is available to Exim. You need to define
+# LOOKUP_MODULE_DIR above so the exim binary actually loads dynamic lookup
+# modules.
+# Also, instead of adding all the libraries/includes to LOOKUP_INCLUDE and
+# LOOKUP_LIBS, add them to the respective LOOKUP_*_INCLUDE and LOOKUP_*_LIBS
+# (where * is the name as given here in this list). That ensures that only
+# the dynamic library and not the exim binary will be linked against the
+# library.
+# NOTE: LDAP cannot be built as a module!
 
 LOOKUP_DBM=yes
 LOOKUP_LSEARCH=yes
@@ -352,6 +376,25 @@ WITH_CONTENT_SCAN=yes
 
 # WITH_OLD_DEMIME=yes
 
+# If you're using ClamAV and are backporting fixes to an old version, instead
+# of staying current (which is the more usual approach) then you may need to
+# use an older API which uses a STREAM command, now deprecated, instead of
+# zINSTREAM.  If you need to set this, please let the Exim developers know, as
+# if nobody reports a need for it, we'll remove this option and clean up the
+# code.  zINSTREAM was introduced with ClamAV 0.95.
+#
+# WITH_OLD_CLAMAV_STREAM=yes
+
+#------------------------------------------------------------------------------
+# By default Exim includes code to support DKIM (DomainKeys Identified
+# Mail, RFC4871) signing and verification.  Verification of signatures is
+# turned on by default.  See the spec for information on conditionally
+# disabling it.  To disable the inclusion of the entire feature, set
+# DISABLE_DKIM to "yes"
+
+# DISABLE_DKIM=yes
+
+
 #------------------------------------------------------------------------------
 # Compiling Exim with experimental features. These are documented in
 # experimental-spec.txt. "Experimental" means that the way these features are
@@ -412,14 +455,13 @@ FIXED_NEVER_USERS=root
 
 
 #------------------------------------------------------------------------------
-# By default, Exim insists that its configuration file be owned either by root
-# or by the Exim user. You can specify one additional permitted owner here.
+# By default, Exim insists that its configuration file be owned by root. You
+# can specify one additional permitted owner here.
 
 # CONFIGURE_OWNER=
 
 # If the configuration file is group-writeable, Exim insists by default that it
-# is owned by root or the Exim user. You can specify one additional permitted
-# group owner here.
+# is owned by root. You can specify one additional permitted group owner here.
 
 # CONFIGURE_GROUP=
 
@@ -441,32 +483,31 @@ FIXED_NEVER_USERS=root
 
 #------------------------------------------------------------------------------
 # The -C option allows Exim to be run with an alternate runtime configuration
-# file. When this is used by root or the Exim user, root privilege is retained
-# by the binary (for any other caller, it is dropped). You can restrict the
-# location of alternate configurations by defining a prefix below. Any file
-# used with -C must then start with this prefix (except that /dev/null is also
-# permitted if the caller is root, because that is used in the install script).
-# If the prefix specifies a directory that is owned by root, a compromise of
-# the Exim account does not permit arbitrary alternate configurations to be
-# used. The prefix can be more restrictive than just a directory (the second
-# example).
+# file. When this is used by root, root privilege is retained by the binary
+# (for any other caller including the Exim user, it is dropped). You can
+# restrict the location of alternate configurations by defining a prefix below.
+# Any file used with -C must then start with this prefix (except that /dev/null
+# is also permitted if the caller is root, because that is used in the install
+# script). If the prefix specifies a directory that is owned by root, a
+# compromise of the Exim account does not permit arbitrary alternate
+# configurations to be used. The prefix can be more restrictive than just a
+# directory (the second example).
 
 # ALT_CONFIG_PREFIX=/some/directory/
 # ALT_CONFIG_PREFIX=/some/directory/exim.conf-
 
 
 #------------------------------------------------------------------------------
-# If you uncomment the following line, only root may use the -C or -D options
-# without losing root privilege. The -C option specifies an alternate runtime
-# configuration file, and the -D option changes macro values in the runtime
-# configuration. Uncommenting this line restricts what can be done with these
-# options. A call to receive a message (either one-off or via a daemon) cannot
-# successfully continue to deliver it, because the re-exec of Exim to regain
-# root privilege will fail, owing to the use of -C or -D by the Exim user.
-# However, you can still use -C for testing (as root) if you do separate Exim
-# calls for receiving a message and subsequently delivering it.
+# When a user other than root uses the -C option to override the configuration
+# file (including the Exim user when re-executing Exim to regain root
+# privileges for local message delivery), this will normally cause Exim to
+# drop root privileges. The TRUSTED_CONFIG_LIST option, specifies a file which
+# contains a list of trusted configuration filenames, one per line. If the -C
+# option is used by the Exim user or by the user specified in the
+# CONFIGURE_OWNER setting, to specify a configuration file which is listed in
+# the TRUSTED_CONFIG_LIST file, then root privileges are not dropped by Exim.
 
-# ALT_CONFIG_ROOT_ONLY=yes
+# TRUSTED_CONFIG_LIST=/usr/exim/trusted_configs
 
 
 #------------------------------------------------------------------------------
@@ -478,6 +519,31 @@ FIXED_NEVER_USERS=root
 
 
 #------------------------------------------------------------------------------
+# By contrast, you might be maintaining a system which relies upon the ability
+# to override values with -D and assumes that these will be passed through to
+# the delivery processes.  As of Exim 4.73, this is no longer the case by
+# default.  Going forward, we strongly recommend that you use a shim Exim
+# configuration file owned by root stored under TRUSTED_CONFIG_LIST.
+# That shim can set macros before .include'ing your main configuration file.
+#
+# As a strictly transient measure to ease migration to 4.73, the
+# WHITELIST_D_MACROS value definies a colon-separated list of macro-names
+# which are permitted to be overriden from the command-line which will be
+# honoured by the Exim user.  So these are macros that can persist to delivery
+# time.
+# Examples might be -DTLS or -DSPOOL=/some/dir.  The values on the
+# command-line are filtered to only permit: [A-Za-z0-9_/.-]*
+#
+# This option is highly likely to be removed in a future release.  It exists
+# only to make 4.73 as easy as possible to migrate to.  If you use it, we
+# encourage you to schedule time to rework your configuration to not depend
+# upon it.  Most people should not need to use this.
+#
+# By default, no macros are whitelisted for -D usage.
+
+# WHITELIST_D_MACROS=TLS:SPOOL
+
+#------------------------------------------------------------------------------
 # Exim has support for the AUTH (authentication) extension of the SMTP
 # protocol, as defined by RFC 2554. If you don't know what SMTP authentication
 # is, you probably won't want to include this code, so you should leave these
@@ -832,6 +898,13 @@ CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux
 #
 # but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM
 # as well.
+#
+# To use a name other than exim in the tcpwrappers config file,
+# e.g. if you're running multiple daemons with different access lists,
+# or multiple MTAs with the same access list, define
+# TCP_WRAPPERS_DAEMON_NAME accordingly
+#
+# TCP_WRAPPERS_DAEMON_NAME="exim"
 
 
 #------------------------------------------------------------------------------
@@ -881,7 +954,6 @@ USE_READLINE=yes
 
 
 
-
 ###############################################################################
 #              THINGS YOU ALMOST NEVER NEED TO MENTION                        #
 ###############################################################################
@@ -1150,6 +1222,6 @@ PID_FILE_PATH=/var/run/exim.pid
 # feature should only be used in very exceptional circumstances. YOU HAVE BEEN
 # WARNED.
 
-ENABLE_DISABLE_FSYNC=yes
+# ENABLE_DISABLE_FSYNC=yes
 
 # End of EDITME for Exim 4.
diff --git a/network/exim/exim.SlackBuild b/network/exim/exim.SlackBuild
index 66bf4dd5bb3a1..f7ac8ddbd88fa 100644
--- a/network/exim/exim.SlackBuild
+++ b/network/exim/exim.SlackBuild
@@ -8,7 +8,7 @@
 # Thanks to Debian for the manpages.
 
 PRGNAM=exim
-VERSION=${VERSION:-4.72}
+VERSION=${VERSION:-4.74}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
diff --git a/network/exim/exim.info b/network/exim/exim.info
index e57330f4f2e3b..a05587137db0c 100644
--- a/network/exim/exim.info
+++ b/network/exim/exim.info
@@ -1,8 +1,8 @@
 PRGNAM="exim"
-VERSION="4.72"
+VERSION="4.74"
 HOMEPAGE="http://www.exim.org/"
-DOWNLOAD="ftp://ftp.exim.org/pub/exim/exim4/exim-4.72.tar.bz2"
-MD5SUM="ccc937b533568e5e8340f181a3b3d2ff"
+DOWNLOAD="ftp://ftp.exim.org/pub/exim/exim4/exim-4.74.tar.bz2"
+MD5SUM="1d9c189940909303d914bbc4247dc861"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 MAINTAINER="Thomas Morper"