audio/jack-audio-connection-kit: Moved from multimedia

4 files changed, 0 insertions, 143 deletions

diff --git a/multimedia/jack-audio-connection-kit/README b/multimedia/jack-audio-connection-kit/README
deleted file mode 100644
index 69ce009abbc6..000000000000
--- a/multimedia/jack-audio-connection-kit/README
+++ /dev/null
@@ -1,19 +0,0 @@
-JACK is a low-latency audio server, written primarily for Linux. It can 
-connect a number of different applications to an audio device, as well 
-as allow them to share audio among themselves.  Its clients can run in 
-their own processes (ie. as a normal application) or they can run within 
-a JACK server instance (i.e. as a "plugin").
-
-Jack uses /dev/shm as a temporary directory for its processes; this is a
-relatively new change, as it used to use  /mnt/ramfs. You may pass an 
-alternate location as JACKTMP when executing the script. For example:
-	JACKTMP=/mnt/tmp jack-audio-connection-kit.SlackBuild
-Assuming you use the default /dev/shm as temporary directory, be sure you 
-have an appropriate line in /etc/fstab to mount it:
-	tmpfs		/dev/shm	tmpfs	defaults	0 0
-If you don't accept the script's default, you'll need to have the appropriate
-mountpoint set up in fstab and mounted, but a discussion of how to do that
-is outside the scope of this document.
-
-This requires libcap and can optionally use libsndfile; both of these are 
-available at SlackBuilds.org.
diff --git a/multimedia/jack-audio-connection-kit/jack-audio-connection-kit.SlackBuild b/multimedia/jack-audio-connection-kit/jack-audio-connection-kit.SlackBuild
deleted file mode 100644
index ef3858a476c7..000000000000
--- a/multimedia/jack-audio-connection-kit/jack-audio-connection-kit.SlackBuild
+++ /dev/null
@@ -1,97 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for jack-audio-connection-kit
-
-# Copyright 2007-2008 Heinz Wiesinger <hmwiesinger@gmx.at>
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Modified by Robby Workman <rworkman@slackbuilds.org> 
-# No additional license terms added  :)
-
-PRGNAM=jack-audio-connection-kit
-VERSION=0.109.2
-ARCH=${ARCH:-i486}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-chmod -R u+w,go+r-w,a-s .
-
-# Jack needs a temp directory using tmpfs as filesystem.
-# By default there is not one available on a base Slackware system.
-# Since 0.109.0 /dev/shm is the recommended default location, but
-# you can configure it to use some other location if you wish.
-JACKTMP=${JACKTMP:-/dev/shm}
-
-if [ "$JACKTMP" != '/dev/shm' ]; then
-  mkdir -p $PKG/$JACKTMP
-  install -d -m 1777 $PKG/$JACKTMP
-fi
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --with-html-dir=/usr/doc/$PRGNAM-$VERSION \
-  --mandir=/usr/man \
-  --enable-resize \
-  --enable-timestamps \
-  --with-default-tmpdir=$JACKTMP \
-  --enable-capabilities \
-  --enable-stripped-jackd
-
-make
-make install-strip DESTDIR=$PKG
-
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-)
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a AUTHORS COPYING* README TODO $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/multimedia/jack-audio-connection-kit/jack-audio-connection-kit.info b/multimedia/jack-audio-connection-kit/jack-audio-connection-kit.info
deleted file mode 100644
index 6939530eddc5..000000000000
--- a/multimedia/jack-audio-connection-kit/jack-audio-connection-kit.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM="jack-audio-connection-kit"
-VERSION="0.109.2"
-HOMEPAGE="http://jackaudio.org"
-DOWNLOAD="http://jackaudio.org/downloads/jack-audio-connection-kit-0.109.2.tar.gz"
-MD5SUM="4d8f795a6c566b9753a86038367e7e32"
-MAINTAINER="ppr:kut"
-EMAIL="HMWiesinger@gmx.at"
-APPROVED="Michiel"
diff --git a/multimedia/jack-audio-connection-kit/slack-desc b/multimedia/jack-audio-connection-kit/slack-desc
deleted file mode 100644
index 45bfa4a5b0c5..000000000000
--- a/multimedia/jack-audio-connection-kit/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-                         |-----handy-ruler-----------------------------------|
-jack-audio-connection-kit: jack-audio-connection-kit (Jack Sound Server)
-jack-audio-connection-kit:
-jack-audio-connection-kit: JACK is a low-latency audio server written mainly
-jack-audio-connection-kit: for Linux.  It can connect a number of different
-jack-audio-connection-kit: applications to an audio device as well as allow
-jack-audio-connection-kit: them to share audio among themselves.
-jack-audio-connection-kit:
-jack-audio-connection-kit: Homepage: http://jackaudio.org
-jack-audio-connection-kit:
-jack-audio-connection-kit:
-jack-audio-connection-kit: