misc/zaptel: Removed from 13.0 repository

6 files changed, 0 insertions, 394 deletions

diff --git a/misc/zaptel/README b/misc/zaptel/README
deleted file mode 100644
index 8a4a745bf124b..0000000000000
--- a/misc/zaptel/README
+++ /dev/null
@@ -1,43 +0,0 @@
-The zaptel drivers and binaries are needed to use popular digital and
-analogue telephony equipment and are typically installed alongside the
-asterisk PBX (although these are not required for asterisk if you are
-not using any hardware to interface with the POTS/PSTN system).  Note
-that if you change your kernel after installing zaptel, you'll have to
-re-compile zaptel (a simple re-install will not suffice).
-
-The rc script included will handle loading and unloading kernel modules
-for you.  By default, it will attempt to load the wctdm module for the
-common Digium cards, and if this fails, will load ztdummy to give you
-a timing device.  Simply edit the MODULES variable at the top of the
-rc script to load other modules if your hardware requires it.  These
-modules should *not* be loaded in rc.local or rc.modules, but rather
-here, as starting and stopping rc.zaptel will cause these modules to
-re-read their config file if you make any changes.
-
-Users outside of North America may find that they need to edit the
-zconfig.h file to specify their region's tones.  This script does not
-handle that at present.  The statement you'll wish to change is:
-  #define DEFAULT_TONE_ZONE=0
-
-The Asterisk Handbook First Edition lists the following zones:
-  0 - North America
-  1 - Australia
-  2 - France
-  7 - Japan
- 14 - Taiwan
-There are many others.  Consult your documentation, or google.
-
-To start zaptel at system boot, do the following:
-  # chmod +x /etc/rc.d/rc.zaptel
-
-Also, you'll need to add a statement such as the following to rc.local:
-  if [ -x /etc/rc.d/rc.zaptel ]; then
-    /etc/rc.d/rc.zaptel start
-  fi
-
-rc.zaptel will create a lockfile that is removed when the service is
-stopped using this script.  Thus, you should probably put this in
-rc.local_shutdown:
-  if [ -x /etc/rc.d/rc.zaptel ]; then
-    /etc/rc.d/rc.zaptel stop
-  fi
diff --git a/misc/zaptel/doinst.sh b/misc/zaptel/doinst.sh
deleted file mode 100644
index c3cebabe6b75d..0000000000000
--- a/misc/zaptel/doinst.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-# Keep same perms on rc.zaptel.new:
-if [ -e etc/rc.d/rc.zaptel ]; then
-  cp -a etc/rc.d/rc.zaptel etc/rc.d/rc.zaptel.new.incoming
-  cat etc/rc.d/rc.zaptel.new > etc/rc.d/rc.zaptel.new.incoming
-  mv etc/rc.d/rc.zaptel.new.incoming etc/rc.d/rc.zaptel.new
-fi
-
-config etc/rc.d/rc.zaptel.new
-config etc/zaptel.conf.new
-
-# Since we're creating kernel modules, this is necessary
-chroot . depmod -a 2>/dev/null
-
diff --git a/misc/zaptel/rc.zaptel b/misc/zaptel/rc.zaptel
deleted file mode 100644
index 1ab703e7ab6e9..0000000000000
--- a/misc/zaptel/rc.zaptel
+++ /dev/null
@@ -1,209 +0,0 @@
-#!/bin/sh
-#
-# This shell script takes care of loading and unloading
-# Zapata Telephony interfaces
-#
-# This script is a heavily modified version of zaptel.init found
-# in the zaptel source archive and thus is covered under the GNU
-# General Public License version 2.
-#
-# Some parts Copyright 2007, Alan Hicks, Lizella, GA
-#
-
-# What modules should we try to load on 'start'?  By default, we'll
-# attempt to load the driver for the popular Digium WildCat cards.  If
-# this fails or no modules are specified, the ztdummy module will be
-# automatically loaded to provide a timing mechanism in the kernel.
-# If you need some other modules loaded, seperate them with spaces.
-# MODULES="foo bar"
-MODULES="wctdm"
-
-ZTCFG_CMD=/sbin/ztcfg
-FXOTUNE=/sbin/fxotune
-LOCKFILE=/var/lock/subsys/zaptel
-
-# The default syncer Astribank. Usually set automatically to a sane
-# value by xpp_sync(1) if you have an Astribank. You can set this to an
-# explicit Astribank (e.g: 01).
-XPP_SYNC=auto
-
-# The maximal timeout (seconds) to wait for udevd to finish generating 
-# device nodes after the modules have loaded and before running ztcfg. 
-ZAP_DEV_TIMEOUT=20
-
-#####################################################################
-##                                                                 ##
-##         NOTHING BELOW HERE SHOULD NEED TO BE CHANGED            ##
-##                                                                 ##
-#####################################################################
-
-# recursively unload a module and its dependencies, if possible.
-# For some reason, modprobe can't seem to remove these modules
-# on its own, so we kludge this here.
-# inputs: module to unload.
-# returns: the result from 
-unload_module() {
-	module="$1"
-	line=$(lsmod 2>/dev/null | grep "^$1 ")
-	if [ "$line" = '' ]; then return; fi # module was not loaded
-
-	set -- $line
-	# $1: the original module, $2: size, $3: refcount, $4: deps list
-	mods=$(echo $4 | tr , ' ')
-	# xpp_usb keeps the xpds below busy if an xpp hardware is
-	# connected. Hence must be removed before them:
-	case "$module" in xpd_*) mods="xpp_usb $mods";; esac
-	for mod in $mods; do
-		# run in a subshell, so it won't step over our vars:
-		(unload_module $mod) 
-		# TODO: the following is probably the error handling we want:
-		# if [ $? != 0 ]; then return 1; fi
-	done
-	rmmod $module
-}
-
-# I have not tested this function in the least, so I cannot say if it
-# works properly with Slackware or not.  If you can, please test this
-# and report back any problems or successes you may have so we can fix
-# this in the SlackBuild script.  With that said, I don't see any reason
-# why this function would not work.
-# -- Alan Hicks
-hpec_start() {
-	# HPEC license found
-	if ! echo /var/lib/digium/licenses/HPEC-*.lic | grep -v '\*' | grep -q .; then
-		return
-	fi
-
-	# zaphpec_enable not installed in /usr/sbin
-	if [ ! -f /usr/sbin/zaphpec_enable ]; then
-		echo -n "Running zaphpec_enable: Failed"
-		echo -n "."
-		echo "  The zaphpec_enable binary is not installed in /usr/sbin."
-		return
-	fi
-
-	# zaphpec_enable not set executable
-	if [ ! -x /usr/sbin/zaphpec_enable ]; then
-		echo -n "Running zaphpec_enable: Failed"
-		echo -n "."
-		echo "  /usr/sbin/zaphpec_enable is not set as executable."
-		return
-	fi
-
-	# zaphpec_enable properly installed
-		action "Running zaphpec_enable: " /usr/sbin/zaphpec_enable
-	if [ $? = 0 ]; then
-		echo -n "done"
-		echo "."
-	else
-		echo -n "Failed"
-		echo -n "."
-		echo "  This can be caused if you had already run zaphpec_enable, or if your HPEC license is no longer valid."
-	fi
-}
-
-
-# Check that telephony is up.
-#[ "${TELEPHONY}" = "yes" ] || exit 0
-
-if [ ! -f /etc/zaptel.conf ]; then
-   echo "Could not find /etc/zaptel.conf! Abandon ship!"
-   exit 1
-fi
-
-if [ "${DEBUG}" = "yes" ]; then
-	ARGS="debug=1"
-fi
-
-RETVAL=0
-
-# See how we were called.
-case "$1" in
-  start)
-	# Load drivers
-	rmmod wcusb 2> /dev/null
-	rmmod wcfxsusb 2> /dev/null
-	rmmod audio 2> /dev/null
-
-	echo "Loading zaptel framework: "
-        modprobe zaptel ${ARGS}
-
-	echo -n "Waiting for zap to come online..."
-	TMOUT=$ZAP_DEV_TIMEOUT # max secs to wait
-	while [ ! -d /dev/zap ] ; do
-                echo -n "$TMOUT "
- 		sleep 1
-		TMOUT=$(expr $TMOUT - 1)
-		if [ $TMOUT -eq 0 ] ; then
-                        echo " " # line break
-			echo "Error: missing /dev/zap!"
-			exit 1
-		fi
-	done
-	echo "OK"
-	echo -n "Loading zaptel hardware modules:"
-	for x in $MODULES; do 
-	  if modprobe ${x} ${ARGS} 2> /dev/null; then
-	    echo "Loaded module: ${x}."
-	  fi
-	done
-	sleep 3 # TODO: remove it
-	
-	if [ ! -e /proc/zaptel/1 ]; then
-		echo "No functioning zap hardware found in /proc/zaptel, loading ztdummy"
-		modprobe ztdummy 2> /dev/null
-	fi
-
-        echo "Running ztcfg: " 
-        $ZTCFG_CMD 2> /dev/null
-	RETVAL=$?
-
-	if [ $RETVAL -eq 0 ]; then
-	  touch $LOCKFILE
-	else
-	  echo "Something went wrong.  Try running ztcfg -vvv."
-        fi
-
-	# This is allowed to fail (or not even run).  These files may not
-        # be present, and aren't required for Asterisk.
-	if [ -x "$FXOTUNE" ] && [ -r /etc/fxotune.conf ]; then
-		$FXOTUNE -s || : 
-	fi
-
-	hpec_start
-	;;
-  stop)
-	# Unload drivers
-	echo -n "Unloading zaptel hardware drivers:"
-  	unload_module zaptel
-	RETVAL=$?
-	echo "."
-
-	[ $RETVAL -eq 0 ] && rm -f $LOCKFILE
-	;;
-  unload)
-	# We don't have zaptel helper, so let's not replicate too much code:
-	# allow others to use the unload command.
-	unload_module zaptel
-	;;
-  restart)
-	$0 stop
-	$0 start
-	;;
-  reload)
-	echo "Reloading ztcfg: "
-	if $ZTCFG_CMD 2> /dev/null; then
-          echo -n "done"
-          RETVAL=0
-        else
-          echo "ztcfg failed. Are your modules loaded?"
-	  RETVAL=1
-        fi
-	;;
-  *)
-	echo "Usage: zaptel {start|stop|restart|reload}"
-	exit 1
-esac
-
-exit $RETVAL
-
diff --git a/misc/zaptel/slack-desc b/misc/zaptel/slack-desc
deleted file mode 100644
index d40f9842a29ae..0000000000000
--- a/misc/zaptel/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-      |-----handy-ruler-----------------------------------------------------|
-zaptel: Zaptel (zaptel drivers)
-zaptel:
-zaptel: The zaptel drivers enable userland applications to interface with
-zaptel: certain digital and analogue devices, primarily of use with the
-zaptel: Asterisk PBX (Private Branch Exchange).
-zaptel:
-zaptel:
-zaptel:
-zaptel:
-zaptel:
-zaptel:
diff --git a/misc/zaptel/zaptel.SlackBuild b/misc/zaptel/zaptel.SlackBuild
deleted file mode 100644
index 6649e1e99c97f..0000000000000
--- a/misc/zaptel/zaptel.SlackBuild
+++ /dev/null
@@ -1,88 +0,0 @@
-#!/bin/bash
-# Copyright 2006, Alan Hicks, Lizella, GA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Modified by Robby Workman <rworkman@slackbuilds.org> with a few things 
-# related to udev rules and such
-
-set -e
-
-PRGNAM="zaptel"
-VERSION="1.4.12.1"
-ARCH=${ARCH:-i486}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG="$TMP/package-$PRGNAM"
-OUTPUT=${OUTPUT:-/tmp}
-
-rm -rf $PKG $TMP/$PRGNAM-$VERSION
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-chmod -R a-s,u+w,go+r-w .
-
-# There's no ./configure script here.  "make" has to be run once to
-# configure the system and even when everything is ok, make will
-# exit with a non-zero status the first time.  We have to kludge this
-# so the script doesn't bail when called with "set -e".
-make || true
-make
-make install DESTDIR=$PKG
-
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-mkdir -p $PKG/install $PKG/usr/doc/$PRGNAM-$VERSION $PKG/etc/rc.d
-cp -a ChangeLog LICENSE README* $PKG/usr/doc/$PRGNAM-$VERSION/
-cat $CWD/zaptel.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/zaptel.SlackBuild
-find $PKG/usr/doc -type f -exec chmod 0644 {} \;
-chown -R root:root $PKG/usr/doc
-
-# Fix up the manpages
-mv $PKG/usr/share/man $PKG/usr/man
-gzip -9 $PKG/usr/man/man?/*.?
-
-# Add this directory.  zaptel/asterisk will complain if it
-# is not present
-mkdir -p $PKG/var/lock/subsys
-
-# Don't clobber config file and init script
-mv $PKG/etc/zaptel.conf $PKG/etc/zaptel.conf.new
-install -m 0755 $CWD/rc.zaptel $PKG/etc/rc.d/rc.zaptel.new
-
-# udev handles device node creation
-rm -fr $PKG/dev
-# hotplug is dead
-rm -rf $PKG/etc/hotplug
-# rename udev rules file
-mv $PKG/etc/udev/rules.d/xpp.rules $PKG/etc/udev/rules.d/96-xpp.rules
-
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/misc/zaptel/zaptel.info b/misc/zaptel/zaptel.info
deleted file mode 100644
index 5fa40e94eea36..0000000000000
--- a/misc/zaptel/zaptel.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM="zaptel"
-VERSION="1.4.12.1"
-HOMEPAGE="http://www.digium.com"
-DOWNLOAD="http://downloads.digium.com/pub/zaptel/zaptel-1.4.12.1.tar.gz"
-MD5SUM="71e83a020b020fa60905edecf70e95a3"
-MAINTAINER="Alan Hicks"
-EMAIL="alan@lizella.net"
-APPROVED="BP{k}"