libraries/perl-TermReadKey: Added. (module for terminal control)

Signed-off-by: Michiel van Wessem <michiel@slackbuilds.org>

4 files changed, 137 insertions, 0 deletions

diff --git a/libraries/perl-TermReadKey/README b/libraries/perl-TermReadKey/README
new file mode 100644
index 0000000000000..2a8706305d36e
--- /dev/null
+++ b/libraries/perl-TermReadKey/README
@@ -0,0 +1,9 @@
+Term::ReadKey - A perl module for simple terminal control
+
+Term::ReadKey is a compiled perl module dedicated to providing simple
+control over terminal driver modes (cbreak, raw, cooked, etc.,) support
+for non-blocking reads, if the architecture allows, and some generalized
+handy functions for working with terminals. One of the main goals is to
+have the functions as portable as possible, so you can just plug in "use
+Term::ReadKey" on any architecture and have a good likelyhood of it
+working.
diff --git a/libraries/perl-TermReadKey/perl-TermReadKey.SlackBuild b/libraries/perl-TermReadKey/perl-TermReadKey.SlackBuild
new file mode 100644
index 0000000000000..a769869190dd8
--- /dev/null
+++ b/libraries/perl-TermReadKey/perl-TermReadKey.SlackBuild
@@ -0,0 +1,102 @@
+#!/bin/sh
+ 
+# Copyright (c) 2010 Daniel LEVAI
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the <organization> nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+# 
+# THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY
+# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Build script for perl-TermReadKey
+
+SRCNAM=TermReadKey
+PRGNAM=perl-$SRCNAM
+VERSION=2.30
+BUILD=${BUILD:-0}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ];then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then 
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -Rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -Rf $PRGNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+perl Makefile.PL \
+  PREFIX=/usr \
+  INSTALLDIRS=vendor \
+  INSTALLVENDORMAN3DIR=/usr/man/man3
+make
+make test
+make install DESTDIR=$PKG
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+
+# Remove perllocal.pod and other special files that don't need to be installed
+find $PKG -name perllocal.pod -o -name ".packlist" -o -name "*.bs" | xargs rm -f || true
+
+# Remove empty directories
+find $PKG -depth -type d -empty -delete || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a README $PKG/usr/doc/$PRGNAM-$VERSION/
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/libraries/perl-TermReadKey/perl-TermReadKey.info b/libraries/perl-TermReadKey/perl-TermReadKey.info
new file mode 100644
index 0000000000000..fecf0a883e78e
--- /dev/null
+++ b/libraries/perl-TermReadKey/perl-TermReadKey.info
@@ -0,0 +1,10 @@
+PRGNAM="perl-TermReadKey"
+VERSION="2.30"
+HOMEPAGE="http://search.cpan.org/~jstowe/TermReadKey-2.30/"
+DOWNLOAD="http://search.cpan.org/CPAN/authors/id/J/JS/JSTOWE/TermReadKey-2.30.tar.gz"
+MD5SUM="f0ef2cea8acfbcc58d865c05b0c7e1ff"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Daniel LEVAI"
+EMAIL="leva@ecentrum.hu"
+APPROVED="Michiel van Wessem"
diff --git a/libraries/perl-TermReadKey/slack-desc b/libraries/perl-TermReadKey/slack-desc
new file mode 100644
index 0000000000000..c4e690c9b0830
--- /dev/null
+++ b/libraries/perl-TermReadKey/slack-desc
@@ -0,0 +1,16 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                |-----handy-ruler------------------------------------------------------|
+perl-TermReadKey: perl-TermReadKey (A perl module for simple terminal control)
+perl-TermReadKey: 
+perl-TermReadKey: Term::ReadKey is a compiled perl module dedicated to providing simple
+perl-TermReadKey: control over terminal driver modes (cbreak, raw, cooked, etc.,)
+perl-TermReadKey: support for non-blocking reads, if the architecture allows, and some
+perl-TermReadKey: generalized handy functions for working with terminals.
+perl-TermReadKey: 
+perl-TermReadKey: Homepage: http://search.cpan.org/~kjalb/TermReadKey-2.14/