libraries/pdf4tcl: Added (tcl package for generating pdf files)

Signed-off-by: bedlam <dave@slackbuilds.org>

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

5 files changed, 1331 insertions, 0 deletions

diff --git a/libraries/pdf4tcl/README b/libraries/pdf4tcl/README
new file mode 100644
index 000000000000..d719f6ab28e6
--- /dev/null
+++ b/libraries/pdf4tcl/README
@@ -0,0 +1,19 @@
+pdf4tcl is a tcl package for generating pdf files. It started as a
+port of pdf4php to the tcl language.
+Features:
+* compressed pdf
+* dumping canvas to pdf
+* lines, arrows, rectangles, circles, ovals, arcs, curves
+* set stroke and fill colour
+* set line style (thickness and dashes)
+* simple text strings, left or right aligned or centered
+* text boxes with left or right aligned, centered or fully justified
+  text
+* rotated text
+* text with skewed characters
+* use adobe standard fonts
+* use other fonts, type1 or truetype fonts can be embedded
+* jpeg and png images, plus support for raw image data
+* add bookmarks and metadata
+* most commonly used paper dimensions, custom ones can be provided.
+* pages can be built top-down or bottom-up
diff --git a/libraries/pdf4tcl/pdf4tcl.SlackBuild b/libraries/pdf4tcl/pdf4tcl.SlackBuild
new file mode 100644
index 000000000000..acd117b27d77
--- /dev/null
+++ b/libraries/pdf4tcl/pdf4tcl.SlackBuild
@@ -0,0 +1,76 @@
+#!/bin/bash
+
+# Slackware build script for pdf4tcl
+
+# Copyright 2023 Juan M. Lasca <juanmlasca@gmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#  Modified by DW (slackbuilds.org)
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=pdf4tcl
+VERSION=${VERSION:-0.9.4}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+PKGTYPE=${PKGTYPE:-tgz}
+ARCH=noarch
+TARBALL_VERSION=$( echo $VERSION | sed "s,\.,,g" )
+
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM$TARBALL_VERSION
+tar xvf $CWD/$PRGNAM$TARBALL_VERSION.tar.gz
+cd $PRGNAM$TARBALL_VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+mkdir -p $PKG/usr/lib/pdf4tcl $PKG/usr/man/mann
+cp -a bitmaps pkgIndex.tcl glyph2uni.tcl \
+   pdf4tcl.tcl stdmetrics.tcl \
+   $PKG/usr/lib/pdf4tcl
+gzip -9c $CWD/pdf4tcl.n > $PKG/usr/man/mann/pdf4tcl.n.gz
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+install -m644 licence.terms $PKG/usr/doc/$PRGNAM-$VERSION
+install -m644 pdf4tcl.html  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE
diff --git a/libraries/pdf4tcl/pdf4tcl.info b/libraries/pdf4tcl/pdf4tcl.info
new file mode 100644
index 000000000000..b3387eada509
--- /dev/null
+++ b/libraries/pdf4tcl/pdf4tcl.info
@@ -0,0 +1,10 @@
+PRGNAM="pdf4tcl"
+VERSION="0.9.4"
+HOMEPAGE="https://pdf4tcl.sourceforge.net/"
+DOWNLOAD="https://sourceforge.net/projects/pdf4tcl/files/pdf4tcl094.tar.gz"
+MD5SUM="b2c960b2f19f4bb5205a0d57ca6056f3"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Juan M. Lasca"
+EMAIL="juanmlasca@gmail.com"
diff --git a/libraries/pdf4tcl/pdf4tcl.n b/libraries/pdf4tcl/pdf4tcl.n
new file mode 100644
index 000000000000..e05801539eaf
--- /dev/null
+++ b/libraries/pdf4tcl/pdf4tcl.n
@@ -0,0 +1,1207 @@
+'\"
+'\" Generated from file 'pdf4tcl\&.man' by tcllib/doctools with format 'nroff'
+'\" Copyright (c) 2007-2016 Peter Spjuth
+'\" Copyright (c) 2009 Yaroslav Schekin
+'\"
+.TH "pdf4tcl" n 0\&.9\&.4 pdf4tcl "Pdf document generation"
+.\" The -*- nroff -*- definitions below are for supplemental macros used
+.\" in Tcl/Tk manual entries.
+.\"
+.\" .AP type name in/out ?indent?
+.\"	Start paragraph describing an argument to a library procedure.
+.\"	type is type of argument (int, etc.), in/out is either "in", "out",
+.\"	or "in/out" to describe whether procedure reads or modifies arg,
+.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
+.\"	needed;  use .AS below instead)
+.\"
+.\" .AS ?type? ?name?
+.\"	Give maximum sizes of arguments for setting tab stops.  Type and
+.\"	name are examples of largest possible arguments that will be passed
+.\"	to .AP later.  If args are omitted, default tab stops are used.
+.\"
+.\" .BS
+.\"	Start box enclosure.  From here until next .BE, everything will be
+.\"	enclosed in one large box.
+.\"
+.\" .BE
+.\"	End of box enclosure.
+.\"
+.\" .CS
+.\"	Begin code excerpt.
+.\"
+.\" .CE
+.\"	End code excerpt.
+.\"
+.\" .VS ?version? ?br?
+.\"	Begin vertical sidebar, for use in marking newly-changed parts
+.\"	of man pages.  The first argument is ignored and used for recording
+.\"	the version when the .VS was added, so that the sidebars can be
+.\"	found and removed when they reach a certain age.  If another argument
+.\"	is present, then a line break is forced before starting the sidebar.
+.\"
+.\" .VE
+.\"	End of vertical sidebar.
+.\"
+.\" .DS
+.\"	Begin an indented unfilled display.
+.\"
+.\" .DE
+.\"	End of indented unfilled display.
+.\"
+.\" .SO ?manpage?
+.\"	Start of list of standard options for a Tk widget. The manpage
+.\"	argument defines where to look up the standard options; if
+.\"	omitted, defaults to "options". The options follow on successive
+.\"	lines, in three columns separated by tabs.
+.\"
+.\" .SE
+.\"	End of list of standard options for a Tk widget.
+.\"
+.\" .OP cmdName dbName dbClass
+.\"	Start of description of a specific option.  cmdName gives the
+.\"	option's name as specified in the class command, dbName gives
+.\"	the option's name in the option database, and dbClass gives
+.\"	the option's class in the option database.
+.\"
+.\" .UL arg1 arg2
+.\"	Print arg1 underlined, then print arg2 normally.
+.\"
+.\" .QW arg1 ?arg2?
+.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
+.\"
+.\" .PQ arg1 ?arg2?
+.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
+.\"	(for trailing punctuation) and then a closing parenthesis.
+.\"
+.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
+.if t .wh -1.3i ^B
+.nr ^l \n(.l
+.ad b
+.\"	# Start an argument description
+.de AP
+.ie !"\\$4"" .TP \\$4
+.el \{\
+.   ie !"\\$2"" .TP \\n()Cu
+.   el          .TP 15
+.\}
+.ta \\n()Au \\n()Bu
+.ie !"\\$3"" \{\
+\&\\$1 \\fI\\$2\\fP (\\$3)
+.\".b
+.\}
+.el \{\
+.br
+.ie !"\\$2"" \{\
+\&\\$1	\\fI\\$2\\fP
+.\}
+.el \{\
+\&\\fI\\$1\\fP
+.\}
+.\}
+..
+.\"	# define tabbing values for .AP
+.de AS
+.nr )A 10n
+.if !"\\$1"" .nr )A \\w'\\$1'u+3n
+.nr )B \\n()Au+15n
+.\"
+.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
+.nr )C \\n()Bu+\\w'(in/out)'u+2n
+..
+.AS Tcl_Interp Tcl_CreateInterp in/out
+.\"	# BS - start boxed text
+.\"	# ^y = starting y location
+.\"	# ^b = 1
+.de BS
+.br
+.mk ^y
+.nr ^b 1u
+.if n .nf
+.if n .ti 0
+.if n \l'\\n(.lu\(ul'
+.if n .fi
+..
+.\"	# BE - end boxed text (draw box now)
+.de BE
+.nf
+.ti 0
+.mk ^t
+.ie n \l'\\n(^lu\(ul'
+.el \{\
+.\"	Draw four-sided box normally, but don't draw top of
+.\"	box if the box started on an earlier page.
+.ie !\\n(^b-1 \{\
+\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
+.\}
+.el \}\
+\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
+.\}
+.\}
+.fi
+.br
+.nr ^b 0
+..
+.\"	# VS - start vertical sidebar
+.\"	# ^Y = starting y location
+.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
+.de VS
+.if !"\\$2"" .br
+.mk ^Y
+.ie n 'mc \s12\(br\s0
+.el .nr ^v 1u
+..
+.\"	# VE - end of vertical sidebar
+.de VE
+.ie n 'mc
+.el \{\
+.ev 2
+.nf
+.ti 0
+.mk ^t
+\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
+.sp -1
+.fi
+.ev
+.\}
+.nr ^v 0
+..
+.\"	# Special macro to handle page bottom:  finish off current
+.\"	# box/sidebar if in box/sidebar mode, then invoked standard
+.\"	# page bottom macro.
+.de ^B
+.ev 2
+'ti 0
+'nf
+.mk ^t
+.if \\n(^b \{\
+.\"	Draw three-sided box if this is the box's first page,
+.\"	draw two sides but no top otherwise.
+.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
+.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
+.\}
+.if \\n(^v \{\
+.nr ^x \\n(^tu+1v-\\n(^Yu
+\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
+.\}
+.bp
+'fi
+.ev
+.if \\n(^b \{\
+.mk ^y
+.nr ^b 2
+.\}
+.if \\n(^v \{\
+.mk ^Y
+.\}
+..
+.\"	# DS - begin display
+.de DS
+.RS
+.nf
+.sp
+..
+.\"	# DE - end display
+.de DE
+.fi
+.RE
+.sp
+..
+.\"	# SO - start of list of standard options
+.de SO
+'ie '\\$1'' .ds So \\fBoptions\\fR
+'el .ds So \\fB\\$1\\fR
+.SH "STANDARD OPTIONS"
+.LP
+.nf
+.ta 5.5c 11c
+.ft B
+..
+.\"	# SE - end of list of standard options
+.de SE
+.fi
+.ft R
+.LP
+See the \\*(So manual entry for details on the standard options.
+..
+.\"	# OP - start of full description for a single option
+.de OP
+.LP
+.nf
+.ta 4c
+Command-Line Name:	\\fB\\$1\\fR
+Database Name:	\\fB\\$2\\fR
+Database Class:	\\fB\\$3\\fR
+.fi
+.IP
+..
+.\"	# CS - begin code excerpt
+.de CS
+.RS
+.nf
+.ta .25i .5i .75i 1i
+..
+.\"	# CE - end code excerpt
+.de CE
+.fi
+.RE
+..
+.\"	# UL - underline word
+.de UL
+\\$1\l'|0\(ul'\\$2
+..
+.\"	# QW - apply quotation marks to word
+.de QW
+.ie '\\*(lq'"' ``\\$1''\\$2
+.\"" fix emacs highlighting
+.el \\*(lq\\$1\\*(rq\\$2
+..
+.\"	# PQ - apply parens and quotation marks to word
+.de PQ
+.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
+.\"" fix emacs highlighting
+.el (\\*(lq\\$1\\*(rq\\$2)\\$3
+..
+.\"	# QR - quoted range
+.de QR
+.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
+.\"" fix emacs highlighting
+.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
+..
+.\"	# MT - "empty" string
+.de MT
+.QW ""
+..
+.BS
+.SH NAME
+pdf4tcl \- Pdf document generation
+.SH SYNOPSIS
+package require \fBTcl  8\&.6\fR
+.sp
+package require \fBpdf4tcl  ?0\&.9\&.4?\fR
+.sp
+\fB::pdf4tcl::new\fR \fIobjectName\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fB::pdf4tcl::getPaperSize\fR \fIpaper\fR
+.sp
+\fB::pdf4tcl::getPaperSizeList\fR
+.sp
+\fB::pdf4tcl::getPoints\fR \fIval\fR
+.sp
+\fB::pdf4tcl::loadBaseTrueTypeFont\fR \fIbasefontname\fR \fIttf_file_name\fR
+.sp
+\fB::pdf4tcl::createBaseTrueTypeFont\fR \fIbasefontname\fR \fIttf_data\fR
+.sp
+\fB::pdf4tcl::loadBaseType1Font\fR \fIbasefontname\fR \fIAFM_file_name\fR \fIPFB_file_name\fR
+.sp
+\fB::pdf4tcl::createBaseType1Font\fR \fIbasefontname\fR \fIAFM_data\fR \fIPFB_data\fR
+.sp
+\fB::pdf4tcl::createFont\fR \fIbasefontname\fR \fIfontname\fR \fIencoding_name\fR
+.sp
+\fB::pdf4tcl::createFontSpecEnc\fR \fIbasefontname\fR \fIfontname\fR \fIsubset\fR
+.sp
+\fB::pdf4tcl::getFonts\fR
+.sp
+\fB::pdf4tcl::rgb2Cmyk\fR \fIrgb\fR
+.sp
+\fB::pdf4tcl::cmyk2Rgb\fR \fIcmyk\fR
+.sp
+\fB::pdf4tcl::catPdf\fR \fIinfile\fR ?\fIinfile \&.\&.\&.\fR? \fIoutfile\fR
+.sp
+\fB::pdf4tcl::getForms\fR \fIinfile\fR
+.sp
+\fBobjectName\fR \fBmethod\fR ?\fIarg arg \&.\&.\&.\fR?
+.sp
+\fIobjectName\fR \fBconfigure\fR
+.sp
+\fIobjectName\fR \fBconfigure\fR \fIoption\fR
+.sp
+\fIobjectName\fR \fBconfigure\fR \fB-option\fR \fIvalue\fR\&.\&.\&.
+.sp
+\fIobjectName\fR \fBcget\fR \fB-option\fR
+.sp
+\fIobjectName\fR \fBdestroy\fR
+.sp
+\fIobjectName\fR \fBstartPage\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBendPage\fR
+.sp
+\fIobjectName\fR \fBstartXObject\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBendXObject\fR
+.sp
+\fIobjectName\fR \fBfinish\fR
+.sp
+\fIobjectName\fR \fBget\fR
+.sp
+\fIobjectName\fR \fBwrite\fR ?\fI-file filename\fR?
+.sp
+\fIobjectName\fR \fBaddForm\fR \fItype\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBgetDrawableArea\fR
+.sp
+\fIobjectName\fR \fBcanvas\fR \fIpath\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBmetadata\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBbookmarkAdd\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBembedFile\fR \fIfilename\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBattachFile\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR \fIfid\fR \fIdescription\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBsetFont\fR \fIsize\fR ?\fIfontname\fR?
+.sp
+\fIobjectName\fR \fBgetStringWidth\fR \fIstr\fR
+.sp
+\fIobjectName\fR \fBgetCharWidth\fR \fIchar\fR
+.sp
+\fIobjectName\fR \fBsetTextPosition\fR \fIx\fR \fIy\fR
+.sp
+\fIobjectName\fR \fBmoveTextPosition\fR \fIdx\fR \fIdy\fR
+.sp
+\fIobjectName\fR \fBgetTextPosition\fR
+.sp
+\fIobjectName\fR \fBnewLine\fR ?\fIspacing\fR?
+.sp
+\fIobjectName\fR \fBsetLineSpacing\fR \fIspacing\fR
+.sp
+\fIobjectName\fR \fBgetLineSpacing\fR
+.sp
+\fIobjectName\fR \fBtext\fR \fIstr\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBdrawTextBox\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR \fIstr\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBgetFontMetric\fR \fImetric\fR
+.sp
+\fIobjectName\fR \fBputImage\fR \fIid\fR \fIx\fR \fIy\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBputRawImage\fR \fIdata\fR \fIx\fR \fIy\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBaddImage\fR \fIfilename\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBaddRawImage\fR \fIdata\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBgetImageHeight\fR \fIid\fR
+.sp
+\fIobjectName\fR \fBgetImageSize\fR \fIid\fR
+.sp
+\fIobjectName\fR \fBgetImageWidth\fR \fIid\fR
+.sp
+\fIobjectName\fR \fBsetBgColor\fR \fIred\fR \fIgreen\fR \fIblue\fR
+.sp
+\fIobjectName\fR \fBsetBgColor\fR \fIc\fR \fIm\fR \fIy\fR \fIk\fR
+.sp
+\fIobjectName\fR \fBsetFillColor\fR \fIred\fR \fIgreen\fR \fIblue\fR
+.sp
+\fIobjectName\fR \fBsetFillColor\fR \fIc\fR \fIm\fR \fIy\fR \fIk\fR
+.sp
+\fIobjectName\fR \fBsetStrokeColor\fR \fIred\fR \fIgreen\fR \fIblue\fR
+.sp
+\fIobjectName\fR \fBsetStrokeColor\fR \fIc\fR \fIm\fR \fIy\fR \fIk\fR
+.sp
+\fIobjectName\fR \fBsetLineWidth\fR \fIwidth\fR
+.sp
+\fIobjectName\fR \fBsetLineDash\fR ?\fIon off\fR\&.\&.\&.? ?\fIoffset\fR?
+.sp
+\fIobjectName\fR \fBsetLineStyle\fR \fIwidth\fR \fIargs\fR
+.sp
+\fIobjectName\fR \fBline\fR \fIx1\fR \fIy1\fR \fIx2\fR \fIy2\fR
+.sp
+\fIobjectName\fR \fBcurve\fR \fIx1\fR \fIy1\fR \fIx2\fR \fIy2\fR \fIx3\fR \fIy3\fR ?\fIx4 y4\fR?
+.sp
+\fIobjectName\fR \fBpolygon\fR ?\fIx y\fR\&.\&.\&.? ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBcircle\fR \fIx\fR \fIy\fR \fIradius\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBoval\fR \fIx\fR \fIy\fR \fIradiusx\fR \fIradiusy\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBarc\fR \fIx\fR \fIy\fR \fIradiusx\fR \fIradiusy\fR \fIphi\fR \fIextend\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBarrow\fR \fIx1\fR \fIy1\fR \fIx2\fR \fIy2\fR \fIsize\fR ?\fIangle\fR?
+.sp
+\fIobjectName\fR \fBrectangle\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR ?\fIoption value\fR\&.\&.\&.?
+.sp
+\fIobjectName\fR \fBclip\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR
+.sp
+\fIobjectName\fR \fBgsave\fR
+.sp
+\fIobjectName\fR \fBgrestore\fR
+.sp
+.BE
+.SH DESCRIPTION
+This package provides a container class for generating \fIpdf\fR documents\&.
+.SH COORDINATES
+All coordinates and distances can be expressed with or without a unit\&. See
+\fBUNITS\fR for valid units\&.
+When the page is configured with \fB-orient\fR set to false, origin is in
+the bottom left corner\&. With \fB-orient\fR true (the default), origin is in the top left
+corner\&.
+Origin is displaced to account for margins, i\&.e\&. if margins are 100,
+the user coordinate (0,0) corresponds to (100,100) on the paper\&.
+Page option \fB-orient\fR can also affect the anchor point for things like
+images\&.
+.SH UNITS
+Any coordinates and distances can be expressed with or without an explicit
+unit\&.  If no unit is given, the default unit for the document is used\&.
+A unit may be one of
+\fBmm\fR (millimeter),
+\fBm\fR (millimeter),
+\fBcm\fR (centimeter),
+\fBc\fR (centimeter),
+\fBp\fR (points) or
+\fBi\fR (inches)\&.
+Commands returning coordinates or distances always return a double value
+in the document's default unit\&.
+.SH "PUBLIC API"
+.SS "PACKAGE COMMANDS"
+.TP
+\fB::pdf4tcl::new\fR \fIobjectName\fR ?\fIoption value\fR\&.\&.\&.?
+This command creates a new pdf4tcl object with an associated Tcl
+command whose name is \fIobjectName\fR\&. This \fIobject\fR command is
+explained in full detail in the sections \fBOBJECT COMMAND\fR
+and \fBOBJECT METHODS\fR\&. The object command will be created
+under the current namespace if the \fIobjectName\fR is not fully
+qualified, and in the specified namespace otherwise\&.
+If \fIobjectName\fR is %AUTO% a name will generated\&.
+The return value is the newly created object's name\&.
+.sp
+The options and their values coming after the name of the object are
+used to set the initial configuration of the object\&.
+See \fBOBJECT CONFIGURATION\fR\&.
+.TP
+\fB::pdf4tcl::getPaperSize\fR \fIpaper\fR
+This call returns the size of a named paper type, e\&.g\&. "a4"\&.
+Paper names are case insensitive\&.
+The argument \fIpaper\fR may also be a two element list
+with values as accepted by \fB::pdf4tcl::getPoints\fR\&.
+The return value is a list with width and height in points\&.
+.TP
+\fB::pdf4tcl::getPaperSizeList\fR
+This call returns the list of known paper types\&.
+.TP
+\fB::pdf4tcl::getPoints\fR \fIval\fR
+This call translates a measurement to points (1/72 inch)\&.
+The format of \fIval\fR is '\fInum\fR ?\fIunit\fR?' where
+\fInum\fR is a valid integer or double\&. See \fBUNITS\fR for valid
+\fIunit\fRs\&.  If no \fIunit\fR is given, the value is interpreted
+as points\&.
+.TP
+\fB::pdf4tcl::loadBaseTrueTypeFont\fR \fIbasefontname\fR \fIttf_file_name\fR
+This call loads a TTF font from file to be used by any pdf4tcl objects\&.
+The \fIbasefontname\fR is used to reference this font\&.
+To use this base font in documents, a font with some encoding must be
+created from it using \fBcreateFont\fR or \fBcreateFontSpecEnc\fR\&.
+.TP
+\fB::pdf4tcl::createBaseTrueTypeFont\fR \fIbasefontname\fR \fIttf_data\fR
+This call creates a base font from TTF binary data\&.
+.TP
+\fB::pdf4tcl::loadBaseType1Font\fR \fIbasefontname\fR \fIAFM_file_name\fR \fIPFB_file_name\fR
+This call loads a Type1 font from two files (\&.afm and \&.pfb) to be used by
+any pdf4tcl objects\&. The \fIbasefontname\fR is used to reference this font\&.
+To use this base font in documents, a font with some encoding must be
+created from it using \fBcreateFont\fR or \fBcreateFontSpecEnc\fR\&.
+.TP
+\fB::pdf4tcl::createBaseType1Font\fR \fIbasefontname\fR \fIAFM_data\fR \fIPFB_data\fR
+This call creates a base font from AFM text and PFB binary data\&.
+.TP
+\fB::pdf4tcl::createFont\fR \fIbasefontname\fR \fIfontname\fR \fIencoding_name\fR
+This call creates a font that can be used in documents from a base font\&. The given encoding
+defines the (up to) 256 unicode characters that can be drawn when \fIfontname\fR is selected\&.
+To use more characters, multiple fonts need to be created and selected based on what needs to be written\&.
+.CS
+
+
+pdf4tcl::loadBaseTrueTypeFont BaseArial "arial\&.ttf"
+pdf4tcl::createFont BaseArial MyArial cp1251
+pdf4tcl::loadBaseType1Font BaseType1 "a010013l\&.afm" "a010013l\&.pfb"
+pdf4tcl::createFont BaseType1 MyType1 cp1251
+pdf4tcl::new mypdf -paper a4 -compress 0
+mypdf startPage
+mypdf setFont 10 MyArial
+set txt "\\u042D\\u0442\\u043E \\u0442\\u0435\\u043A\\u0441\\u0442 \\u043D\\u0430 \\u0440\\u0443\\u0441\\u0441\\u043A\\u043E\\u043C\\
+         \\u044F\\u0437\\u044B\\u043A\\u0435\&. This is text in Russian\&."
+mypdf text $txt -bg #CACACA -x 50 -y 100
+mypdf setFont 10 MyType1
+mypdf text $txt -x 50 -y 200
+mypdf write -file fonts\&.pdf
+mypdf destroy
+
+.CE
+.TP
+\fB::pdf4tcl::createFontSpecEnc\fR \fIbasefontname\fR \fIfontname\fR \fIsubset\fR
+This call creates a font that can be used in documents from a base font\&.
+The \fIsubset\fR must be a list of (up to 256) unicode values which are the characters that can be
+drawn when \fIfontname\fR is selected\&.
+.CS
+
+
+pdf4tcl::loadBaseTrueTypeFont BaseArial "arial\&.ttf"
+# Subset is a list of unicodes:
+for {set f 0} {$f < 128} {incr f} {lappend subset $f}
+lappend subset [expr 0xB2] [expr 0x3B2]
+pdf4tcl::createFontSpecEnc BaseArial MyArial $subset
+pdf4tcl::new mypdf -paper a4
+mypdf startPage
+mypdf setFont 16 MyArial
+set txt "sin\\u00B2\\u03B2 + cos\\u00B2\\u03B2 = 1"
+mypdf text $txt -x 50 -y 100
+mypdf write -file specenc\&.pdf
+mypdf destroy
+
+.CE
+.TP
+\fB::pdf4tcl::getFonts\fR
+This call returns the list of known font names, i\&.e\&. those accepted in a call
+to \fBsetFont\fR\&.
+This includes the default fonts and fonts created by e\&.g\&.
+\fB::pdf4tcl::createFont\fR\&.
+.TP
+\fB::pdf4tcl::rgb2Cmyk\fR \fIrgb\fR
+This call translates an RGB color value to a CMYK color value\&.
+It is used internally if \fB-cmyk\fR was set at object creation to
+translate colors\&.
+You can redefine this procedure to provide your own translation\&.
+.TP
+\fB::pdf4tcl::cmyk2Rgb\fR \fIcmyk\fR
+This call translates a CMYK color value to an RGB color value\&.
+It is used internally to translate colors\&.
+You can redefine this procedure to provide your own translation\&.
+.TP
+\fB::pdf4tcl::catPdf\fR \fIinfile\fR ?\fIinfile \&.\&.\&.\fR? \fIoutfile\fR
+This call concatenates PDF files into one\&.
+Currently the implementation limits the PDFs a lot since not all details
+are taken care of yet\&. Straightforward ones like those created with pdf4tcl
+or ps2pdf should work mostly ok\&.
+.TP
+\fB::pdf4tcl::getForms\fR \fIinfile\fR
+This call extracts form data from a PDF file\&.
+The return value is a dictionary with id/info pairs\&.
+The id is the one set with \fI-id\fR to \fBaddForm\fR, if the PDF
+was generated with pdf4tcl\&.
+The info is a dictionary with the following fields:
+.RS
+.TP
+\fBtype\fR
+Field type\&.
+.TP
+\fBvalue\fR
+Form value\&.
+.TP
+\fBflags\fR
+Value of form flags field\&.
+.TP
+\fBdefault\fR
+Default value, if any\&.
+.RE
+.PP
+.SS "OBJECT COMMAND"
+All commands created by \fB::pdf4tcl::new\fR have the following
+general form and may be used to invoke various operations on their
+pdf object\&.
+.TP
+\fBobjectName\fR \fBmethod\fR ?\fIarg arg \&.\&.\&.\fR?
+The method \fBmethod\fR and its \fIarg\fR'uments determine the exact
+behavior of the command\&. See section \fBOBJECT METHODS\fR for
+the detailed specifications\&.
+.PP
+.SS "OBJECT METHODS"
+.TP
+\fIobjectName\fR \fBconfigure\fR
+The method returns a list of all known options and their current
+values when called without any arguments\&.
+.TP
+\fIobjectName\fR \fBconfigure\fR \fIoption\fR
+The method behaves like the method \fBcget\fR when called with a
+single argument and returns the value of the option specified by said
+argument\&.
+.TP
+\fIobjectName\fR \fBconfigure\fR \fB-option\fR \fIvalue\fR\&.\&.\&.
+The method reconfigures the specified \fBoption\fRs of the object,
+setting them to the associated \fIvalue\fRs, when called with an even
+number of arguments, at least two\&.
+.sp
+The legal options are described in the section
+\fBOBJECT CONFIGURATION\fR\&.
+.TP
+\fIobjectName\fR \fBcget\fR \fB-option\fR
+This method expects a legal configuration option as argument and will
+return the current value of that option for the object the method was
+invoked for\&.
+.sp
+The legal configuration options are described in section
+\fBOBJECT CONFIGURATION\fR\&.
+.TP
+\fIobjectName\fR \fBdestroy\fR
+This method destroys the object it is invoked for\&.
+If the \fB-file\fR option was given at object creation,
+the output file will be finished and closed\&.
+.TP
+\fIobjectName\fR \fBstartPage\fR ?\fIoption value\fR\&.\&.\&.?
+This method starts a new page in the document\&. The page will have the
+default page settings for the document unless overridden by \fIoption\fR\&.
+See \fBPAGE CONFIGURATION\fR for page settings\&.
+This will end any ongoing page\&.
+.TP
+\fIobjectName\fR \fBendPage\fR
+This method ends a page in the document\&.  It is normally not needed since
+it is implied by e\&.g\&. \fBstartPage\fR and \fBfinish\fR\&.  However,
+if the document is built page by page in e\&.g\&. an event driven environment
+it can be good to call \fBendPage\fR explicitly to have all the page's
+work finished before reentering the event loop\&.
+.TP
+\fIobjectName\fR \fBstartXObject\fR ?\fIoption value\fR\&.\&.\&.?
+This method starts a new XObject in the document\&.  An XObject is a reusable
+drawing object and behaves just like a page where you can draw any graphics\&.
+An XObject must be created between pages and this method will end any ongoing
+page\&. The return value is an id that can be used with \fBputImage\fR to draw
+it on the current page or with some forms\&.
+All page settings (\fBPAGE CONFIGURATION\fR) are
+valid when creating an XObject\&. Default options are
+\fB-paper\fR = {100p 100p}, \fB-landscape\fR = 0,
+\fB-orient\fR = document default, \fB-margin\fR= 0\&.
+.RS
+.TP
+\fB-noimage\fR \fIbool\fR
+If this is set the XObject is not added to the image resource set and cannot
+be used with putImage, only in forms\&. The XObject also gets access to resources
+which is needed to use e\&.g\&. fonts within the XObject\&. This behaviour has shown
+to be PDF reader dependent, and it is currently not known if this can be
+made to work better\&.
+.RE
+.TP
+\fIobjectName\fR \fBendXObject\fR
+This method ends an XObject definition\&. It works just like \fBendPage\fR\&.
+.TP
+\fIobjectName\fR \fBfinish\fR
+This method ends the document\&.
+This will do \fBendPage\fR if needed\&.
+If the \fB-file\fR option was given at object creation,
+the output file will be finished and closed\&.
+.TP
+\fIobjectName\fR \fBget\fR
+This method returns the generated pdf\&.
+This will do \fBendPage\fR and \fBfinish\fR if needed\&.
+If the \fB-file\fR option was given at object creation, nothing is returned\&.
+.TP
+\fIobjectName\fR \fBwrite\fR ?\fI-file filename\fR?
+This method writes the generated pdf to the given \fIfilename\fR\&.
+If no \fIfilename\fR is given, it is written to stdout\&.
+This will do \fBendPage\fR and \fBfinish\fR if needed\&.
+If the \fB-file\fR option was given at object creation, an empty file
+is created\&.
+.TP
+\fIobjectName\fR \fBaddForm\fR \fItype\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR ?\fIoption value\fR\&.\&.\&.?
+Add an interactive form at the given position and size\&. Supported types are \fItext\fR and \fIcheckbutton\fR\&.
+Option \fI-init\fR gives an initial value for the form\&.
+Option \fI-id\fR gives the form an ID that must be unique within a document\&. If not given, one will be generated\&.
+For a text, option \fI-multiline\fR enables multi line editing\&.
+For a checkbutton, options \fI-on\fR and \fI-off\fR can be given an xobject (created with \fBstartXObject\fR) to control its appearance\&.
+.PP
+.SS "OBJECT METHODS, PAGE"
+.TP
+\fIobjectName\fR \fBgetDrawableArea\fR
+This method returns the size of the available area on the page,
+after removing margins\&.  The return value is a list of width and height,
+in the document's default unit\&.
+.TP
+\fIobjectName\fR \fBcanvas\fR \fIpath\fR ?\fIoption value\fR\&.\&.\&.?
+Draws the contents of the canvas widget \fIpath\fR on the current page\&.
+The return value is the bounding box in pdf page coordinates of the area covered\&.
+Option \fI-bbox\fR gives the area of the canvas to be drawn\&. Default is
+the entire contents, i\&.e\&. the result of $path bbox all\&.
+Options \fI-x\fR, \fI-y\fR, \fI-width\fR and \fI-height\fR defines
+an area on the page where to place the contents\&. Default area starts at origin,
+stretching over the drawable area of the page\&.
+Option \fI-sticky\fR defines how to place the contents within the area\&.
+The area is always filled in one direction, preserving aspect ratio, unless
+\fI-sticky\fR defines that the other direction should be filled too\&.  Default
+\fI-sticky\fR is \fInw\fR\&.
+If option \fI-bg\fR is true, a background is drawn in the canvas' background
+color\&.  Otherwise only objects are drawn\&.  Default is false\&.
+Option \fI-fontmap\fR gives a dictionary mapping from Tk font names to PDF font names\&.
+Option \fI-textscale\fR overrides the automatic downsizing made for tk::canvas text items that are deemed too large\&. If \fI-textscale\fR is larger than 1, all text items are reduced in size by that factor\&.
+.sp
+Fonts:
+.sp
+If no font mapping is given, fonts for text items are limited to PDF's
+builtins, i\&.e\&. Helvetica, Times and Courier\&. A guess is made to chose which
+one to use to get a reasonable display on the page\&.
+.sp
+An element in a font mapping must exactly match the -font option in the
+text item\&. The corresponding mapping value is a PDF font family, e\&.g\&. one
+created by \fBpdf4tcl::createFont\fR, possibly followed by a size\&.
+It is recommended to use named fonts
+in Tk to control the font mapping in detail\&.
+.sp
+Limitations:
+.sp
+Option -splinesteps for lines/polygons is ignored\&.
+.sp
+Stipple offset is limited\&. The form x,y should work\&.
+.sp
+Window items require Img to be present and must be visible on-screen when
+the canvas is drawn\&.
+.TP
+\fIobjectName\fR \fBmetadata\fR ?\fIoption value\fR\&.\&.\&.?
+This method sets metadata fields for this document\&.  Supported field options are
+\fI-author\fR, \fI-creator\fR, \fI-keywords\fR, \fI-producer\fR, \fI-subject\fR,
+\fI-title\fR, \fI-creationdate\fR and \fI-format\fR\&.
+.TP
+\fIobjectName\fR \fBbookmarkAdd\fR ?\fIoption value\fR\&.\&.\&.?
+Add a bookmark on the current page\&.
+.RS
+.TP
+\fB-title\fR \fItext\fR
+Set the text of the bookmark\&.
+.TP
+\fB-level\fR \fIlevel\fR
+Set the level of the bookmark\&. Default is 0\&.
+.TP
+\fB-closed\fR \fIboolean\fR
+Select if the bookmark is closed by default\&. Default is false, i\&.e\&. not closed\&.
+.RE
+.TP
+\fIobjectName\fR \fBembedFile\fR \fIfilename\fR ?\fIoption value\fR\&.\&.\&.?
+This method embeds a file into the PDF stream\&. File data is considered binary\&. Returns an id that can be used in subsequent calls to \fBattachFile\fR\&.
+.RS
+.TP
+\fB-id\fR \fIid\fR
+Explicitly select an id for the file\&. The \fIid\fR must be unique within the document\&.
+.TP
+\fB-contents\fR \fIdata\fR
+Provides the file contents instead of reading the actual file\&.
+.RE
+.TP
+\fIobjectName\fR \fBattachFile\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR \fIfid\fR \fIdescription\fR ?\fIoption value\fR\&.\&.\&.?
+This method adds a file annotation to the current page\&. The location of the file annotation is given by the coordinates \fIx\fR, \fIy\fR, \fIwidth\fR, \fIheight\fR\&. The annotation is rendered by default as a paperclip icon, which allows the extraction of the attached file\&. An \fIfid\fR from a previous call to \fBembedFile\fR must be set as well as a \fIdescription\fR, which is shown by the PDF viewer upon activating the annotation\&.
+.RS
+.TP
+\fB-icon\fR \fIicon\fR
+Controls the appearance of the attachment\&. Valid values are Paperclip, Tag, Graph, or PushPin\&. Default value is Paperclip\&.
+.RE
+.CS
+
+
+set fid [$pdfobject embedFile "data\&.txt" -contents "This should be stored in the file\&."]
+$pdfobject attachFile 0 0 100 100 $fid "This is the description"
+
+.CE
+.PP
+.SS "OBJECT METHODS, TEXT"
+.TP
+\fIobjectName\fR \fBsetFont\fR \fIsize\fR ?\fIfontname\fR?
+This method sets the font used by text drawing routines\&. If \fIfontname\fR
+is not provided, the previously set \fIfontname\fR is kept\&.
+.TP
+\fIobjectName\fR \fBgetStringWidth\fR \fIstr\fR
+This method returns the width of a string under the current font\&.
+.TP
+\fIobjectName\fR \fBgetCharWidth\fR \fIchar\fR
+This method returns the width of a character under the current font\&.
+.TP
+\fIobjectName\fR \fBsetTextPosition\fR \fIx\fR \fIy\fR
+Set coordinate for next text command\&.
+.TP
+\fIobjectName\fR \fBmoveTextPosition\fR \fIdx\fR \fIdy\fR
+Increment position by \fIdx\fR, \fIdy\fR for the next text command\&.
+.TP
+\fIobjectName\fR \fBgetTextPosition\fR
+This method returns the current text coordinate\&.
+.TP
+\fIobjectName\fR \fBnewLine\fR ?\fIspacing\fR?
+Moves text coordinate down and resets x to where the latest
+\fBsetTextPosition\fR was\&. The number of lines to move down can
+be set by \fIspacing\fR\&. This may be any real number, including negative,
+and defaults to the value set by \fBsetLineSpacing\fR\&.
+.TP
+\fIobjectName\fR \fBsetLineSpacing\fR \fIspacing\fR
+Set the default line spacing used be e\&.g\&. \fBnewLine\fR\&.  Initially
+the spacing is 1\&.
+.TP
+\fIobjectName\fR \fBgetLineSpacing\fR
+Get the current default line spacing\&.
+.TP
+\fIobjectName\fR \fBtext\fR \fIstr\fR ?\fIoption value\fR\&.\&.\&.?
+Draw text at the position defined by setTextPosition using the font defined by
+setFont\&.
+.RS
+.TP
+\fB-align\fR \fIleft|right|center\fR   (default left)
+.TP
+\fB-angle\fR \fIdegrees\fR   (default 0) - Orient string at the specified angle\&.
+.TP
+\fB-xangle\fR \fIdegrees\fR   (default 0)
+.TP
+\fB-yangle\fR \fIdegrees\fR   (default 0) - Apply x or y shear to the text\&.
+.TP
+\fB-x\fR \fIx\fR   (default 0)
+.TP
+\fB-y\fR \fIy\fR   (default 0) - Allow the text to be positioned without setTextPosition\&.
+.TP
+\fB-bg\fR \fIbool\fR   (default 0)
+.TP
+\fB-background\fR \fIbool\fR   (default 0)
+.TP
+\fB-fill\fR \fIbool\fR   (default 0)
+Any of \fB-bg\fR, \fB-background\fR or \fB-fill\fR cause the text to be drawn
+on a background whose color is set by setBgColor\&.
+.RE
+.TP
+\fIobjectName\fR \fBdrawTextBox\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR \fIstr\fR ?\fIoption value\fR\&.\&.\&.?
+Draw the text string \fIstr\fR wrapping at blanks and tabs so that it fits within the box defined
+by \fIx\fR, \fIy\fR, \fIwidth\fR and \fIheight\fR\&. An embedded newline in \fIstr\fR causes
+a new line in the output\&. If \fIstr\fR is too long to fit in the specified box, it is truncated and the unused remainder is returned\&.
+.RS
+.TP
+\fB-align\fR \fIleft|right|center|justify\fR
+Specifies the justification\&. If not given, the text is left justified\&.
+.TP
+\fB-linesvar\fR \fIvar\fR
+Gives the name of a variable which will be set to the number of lines written\&.
+.TP
+\fB-dryrun\fR \fIbool\fR
+If true, no changes will be made to the PDF document\&. The return
+value and \fB-linesvar\fR gives information of what would happen
+with the given text\&.
+.RE
+.TP
+\fIobjectName\fR \fBgetFontMetric\fR \fImetric\fR
+Get information about current font\&. The available \fImetric\fRs are
+\fBascend\fR, \fBdescend\fR, \fBfixed\fR, \fBbboxb\fR,
+\fBbboxt\fR and \fBheight\fR\&.
+.RS
+.TP
+\fBascend\fR
+Top of typical glyph, displacement from anchor point\&. Typically a positive number since it is above the anchor point\&.
+.TP
+\fBdescend\fR
+Bottom of typical glyph, displacement from anchor point\&. Typically a negative number since it is below the anchor point\&.
+.TP
+\fBfixed\fR
+Boolean which is true if this is a fixed width font\&.
+.TP
+\fBbboxb\fR
+Bottom of Bounding Box, displacement from anchor point\&. Typically a negative number since it is below the anchor point\&.
+.TP
+\fBbboxt\fR
+Top of Bounding Box, displacement from anchor point\&. Typically a positive number since it is above the anchor point\&.
+.TP
+\fBheight\fR
+Height of font's Bounding Box\&.
+.RE
+.PP
+.SS "OBJECT METHODS, IMAGES"
+A limited set of image formats are directly understood by pdf4tcl,
+currently some JPEG, some PNG, and some TIFF formats\&.
+To use unsupported formats, use Tk and the Img
+package to load and dump images to raw format which can be fed to
+\fBputRawImage\fR and \fBaddRawImage\fR\&.
+.TP
+\fIobjectName\fR \fBputImage\fR \fIid\fR \fIx\fR \fIy\fR ?\fIoption value\fR\&.\&.\&.?
+Put an image on the current page\&. The image must have been added previously by
+\fBaddImage\fR or \fBaddRawImage\fR\&. The \fIid\fR is the one returned
+from the add command\&.
+.RS
+.TP
+\fB-angle\fR \fIdegrees\fR
+Rotate image \fIdegrees\fR counterclockwise around the anchor point\&.
+Default is 0\&.
+.TP
+\fB-anchor\fR \fIanchor\fR
+Set the anchor point (nw, n, ne etc\&.) of the image\&.
+Coordinates \fIx\fR and \fIy\fR places the anchor point, and any rotation is around the anchor point\&.
+Default is nw if \fB-orient\fR is true, otherwise se\&.
+.TP
+\fB-height\fR \fIheight\fR
+Set the height of the image\&.  Default height is one point per pixel\&.  If \fIwidth\fR is set but not \fIheight\fR,
+the height is selected to preserve the aspect ratio of the image\&.
+.TP
+\fB-width\fR \fIwidth\fR
+Set the width of the image\&.  Default width is one point per pixel\&.
+If \fIheight\fR is set but not \fIwidth\fR, the width is selected to
+preserve the aspect ratio of the image\&.
+.RE
+.TP
+\fIobjectName\fR \fBputRawImage\fR \fIdata\fR \fIx\fR \fIy\fR ?\fIoption value\fR\&.\&.\&.?
+Put an image on the current page\&. Works like \fBputImage\fR except that the raw image data is given directly\&.
+.RS
+.TP
+\fB-compress\fR \fIboolean\fR
+Raw data will be zlib compressed if this option is set to true\&.
+Default value is the document's \fB-compress\fR setting\&.
+.RE
+.CS
+
+
+  image create photo img1 -file image\&.gif
+  set imgdata [img1 data]
+  mypdf putRawImage $imgdata 60 20 -height 40
+
+.CE
+.TP
+\fIobjectName\fR \fBaddImage\fR \fIfilename\fR ?\fIoption value\fR\&.\&.\&.?
+Add an image to the document\&. Returns an id that can be used in subsequent
+calls to \fBputImage\fR\&. Supported formats are PNG, JPEG and TIFF\&.
+.RS
+.TP
+\fB-id\fR \fIid\fR
+Explicitly select an id for the image\&. The \fIid\fR must be unique within the document\&.
+.TP
+\fB-type\fR \fIname\fR
+Set the image type\&.  This can usually be deduced from the file name, this
+option helps when that is not possible\&.  This can be either "png", "jpeg",
+or "tiff"\&.
+.RE
+.TP
+\fIobjectName\fR \fBaddRawImage\fR \fIdata\fR ?\fIoption value\fR\&.\&.\&.?
+Add an image to the document\&. Works like \fBaddImage\fR except that the raw image data is given directly\&.
+.RS
+.TP
+\fB-compress\fR \fIboolean\fR
+Raw data will be zlib compressed if this option is set to true\&.
+Default value is the document's \fB-compress\fR setting\&.
+.RE
+.CS
+
+
+  image create photo img1 -file image\&.gif
+  set imgdata [img1 data]
+  set id [mypdf addRawImage $imgdata]
+  mypdf putImage $id 20 60 -width 100
+
+.CE
+.TP
+\fIobjectName\fR \fBgetImageHeight\fR \fIid\fR
+This method returns the height of the image identified by \fIid\fR\&.
+.TP
+\fIobjectName\fR \fBgetImageSize\fR \fIid\fR
+This method returns the size of the image identified by \fIid\fR\&.  The
+return value is a list of width and height\&.
+.TP
+\fIobjectName\fR \fBgetImageWidth\fR \fIid\fR
+This method returns the width of the image identified by \fIid\fR\&.
+.PP
+.SS "OBJECT METHODS, COLORS"
+Colors can be expressed in various formats\&. First, as a three element list
+of values in the range 0\&.0 to 1\&.0\&. Second, in the format #XXXXXX where
+the Xes are two hexadecimal digits per color value\&.  Third, if Tk is available,
+any color accepted by winfo rgb is accepted\&.
+.TP
+\fIobjectName\fR \fBsetBgColor\fR \fIred\fR \fIgreen\fR \fIblue\fR
+Sets the background color for text operations where -bg is true\&.
+.TP
+\fIobjectName\fR \fBsetBgColor\fR \fIc\fR \fIm\fR \fIy\fR \fIk\fR
+Alternative calling form, to set color in CMYK color space\&.
+.TP
+\fIobjectName\fR \fBsetFillColor\fR \fIred\fR \fIgreen\fR \fIblue\fR
+Sets the fill color for graphics operations, and the foreground color for
+text operations\&.
+.TP
+\fIobjectName\fR \fBsetFillColor\fR \fIc\fR \fIm\fR \fIy\fR \fIk\fR
+Alternative calling form, to set color in CMYK color space\&.
+.TP
+\fIobjectName\fR \fBsetStrokeColor\fR \fIred\fR \fIgreen\fR \fIblue\fR
+Sets the stroke color for graphics operations\&.
+.TP
+\fIobjectName\fR \fBsetStrokeColor\fR \fIc\fR \fIm\fR \fIy\fR \fIk\fR
+Alternative calling form, to set color in CMYK color space\&.
+.PP
+.SS "OBJECT METHODS, GRAPHICS"
+.TP
+\fIobjectName\fR \fBsetLineWidth\fR \fIwidth\fR
+Sets the width for subsequent line drawing\&.
+Line width must be a non-negative number\&.
+.TP
+\fIobjectName\fR \fBsetLineDash\fR ?\fIon off\fR\&.\&.\&.? ?\fIoffset\fR?
+Sets the dash pattern for subsequent line drawing\&.
+Offset and any elements in the dash pattern must be non-negative numbers\&.
+\fIon off\fR is a series of pairs of numbers which define a
+dash pattern\&. The 1st, 3rd \&.\&.\&. numbers give units to paint,
+the 2nd, 4th \&.\&.\&. numbers specify unpainted gaps\&. When all numbers have
+been used, the pattern is re-started from the beginning\&.
+An optional last argument sets the dash offset, which defaults to 0\&.
+Calling \fBsetLineDash\fR with no arguments resets the dash pattern
+to a solid line\&.
+.TP
+\fIobjectName\fR \fBsetLineStyle\fR \fIwidth\fR \fIargs\fR
+Sets the width and dash pattern for subsequent line drawing\&.
+Line width and any elements in the dash pattern must be non-negative numbers\&.
+\fIargs\fR is a series of numbers (not a tcl list) which define a
+dash pattern\&. The 1st, 3rd \&.\&.\&. numbers give units to paint,
+the 2nd, 4th \&.\&.\&. numbers specify unpainted gaps\&. When all numbers have
+been used, the pattern is re-started from the beginning\&.
+This method do not support offsetting the pattern, see \fBsetLineDash\fR
+for a more complete method\&.
+.TP
+\fIobjectName\fR \fBline\fR \fIx1\fR \fIy1\fR \fIx2\fR \fIy2\fR
+Draws a line from \fIx1,\fR \fIy1\fR to \fIx2,\fR \fIy2\fR
+.TP
+\fIobjectName\fR \fBcurve\fR \fIx1\fR \fIy1\fR \fIx2\fR \fIy2\fR \fIx3\fR \fIy3\fR ?\fIx4 y4\fR?
+If \fIx4,\fR \fIy4\fR are present, draws a cubic bezier from \fIx1,\fR
+\fIy1\fR to \fIx4,\fR \fIy4\fR with control points \fIx2,\fR \fIy2\fR and
+\fIx3,\fR \fIy3\fR\&. Otherwise draws a quadratic bezier from \fIx1,\fR
+\fIy1\fR to \fIx3,\fR \fIy3\fR, with control point \fIx2,\fR
+\fIy2\fR
+.TP
+\fIobjectName\fR \fBpolygon\fR ?\fIx y\fR\&.\&.\&.? ?\fIoption value\fR\&.\&.\&.?
+Draw a polygon\&. There must be at least 3 points\&.
+The polygon is closed back to the first coordinate unless \fI-closed\fR is false in which case a poly-line is drawn\&.
+.RS
+.TP
+\fB-filled\fR \fIbool\fR   (default 0)
+Fill the polygon\&.
+.TP
+\fB-stroke\fR \fIbool\fR   (default 1)
+Draw an outline of the polygon\&.
+.TP
+\fB-closed\fR \fIbool\fR   (default 1)
+Close polygon\&.
+.RE
+.TP
+\fIobjectName\fR \fBcircle\fR \fIx\fR \fIy\fR \fIradius\fR ?\fIoption value\fR\&.\&.\&.?
+Draw a circle at the given center coordinates\&.
+.RS
+.TP
+\fB-filled\fR \fIbool\fR   (default 0)
+Fill the circle\&.
+.TP
+\fB-stroke\fR \fIbool\fR   (default 1)
+Draw an outline of the circle\&.
+.RE
+.TP
+\fIobjectName\fR \fBoval\fR \fIx\fR \fIy\fR \fIradiusx\fR \fIradiusy\fR ?\fIoption value\fR\&.\&.\&.?
+Draw an oval at the given center coordinates\&.
+.RS
+.TP
+\fB-filled\fR \fIbool\fR   (default 0)
+Fill the oval\&.
+.TP
+\fB-stroke\fR \fIbool\fR   (default 1)
+Draw an outline of the oval\&.
+.RE
+.TP
+\fIobjectName\fR \fBarc\fR \fIx\fR \fIy\fR \fIradiusx\fR \fIradiusy\fR \fIphi\fR \fIextend\fR ?\fIoption value\fR\&.\&.\&.?
+Draw an arc, following the given oval\&. The arc starts at angle \fIphi\fR, given in degrees starting in the "east" direction, counting counter clockwise\&. The arc extends \fIextend\fR degrees\&.
+.RS
+.TP
+\fB-filled\fR \fIbool\fR   (default 0)
+Fill the arc\&.
+.TP
+\fB-stroke\fR \fIbool\fR   (default 1)
+Draw an outline of the arc\&.
+.TP
+\fB-style\fR \fIarc|pieslice|chord\fR   (default \fIarc\fR)
+Defines the style of the arc\&. An \fIarc\fR draws the perimeter of the arc and is never filled\&. A \fIpieslice\fR closes the arc with lines to the center of the oval\&. A \fIchord\fR closes the arc directly\&.
+.RE
+.TP
+\fIobjectName\fR \fBarrow\fR \fIx1\fR \fIy1\fR \fIx2\fR \fIy2\fR \fIsize\fR ?\fIangle\fR?
+Draw an arrow\&. Default \fIangle\fR is 20 degrees\&.
+.TP
+\fIobjectName\fR \fBrectangle\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR ?\fIoption value\fR\&.\&.\&.?
+Draw a rectangle\&.
+.RS
+.TP
+\fB-filled\fR \fIbool\fR   (default 0)
+Fill the rectangle\&.
+.TP
+\fB-stroke\fR \fIbool\fR   (default 1)
+Draw an outline of the rectangle\&.
+.RE
+.TP
+\fIobjectName\fR \fBclip\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR
+Create a clip region\&. To cancel a clip region you must restore a graphic context that was saved before\&.
+.TP
+\fIobjectName\fR \fBgsave\fR
+Save graphic/text context\&. (I\&.e\&. insert a raw PDF "q" command)\&.
+This saves the settings of at least these calls: \fBclip\fR, \fBsetBgColor\fR, \fBsetFillColor\fR, \fBsetStrokeColor\fR, \fBsetLineStyle\fR, \fBsetLineWidth\fR, \fBsetLineDash\fR, \fBsetFont\fR, and \fBsetLineSpacing\fR\&.
+Each call to \fBgsave\fR should be followed by a later call to \fBgrestore\fR in the same page\&.
+.TP
+\fIobjectName\fR \fBgrestore\fR
+Restore graphic/text context\&. (I\&.e\&. insert a raw PDF "Q" command)\&.
+.PP
+.SS "OBJECT CONFIGURATION"
+All pdf4tcl objects understand the options from \fBPAGE CONFIGURATION\fR,
+which defines default page settings when used with a pdf4tcl object\&.
+The objects also understand the following configuration options:
+.TP
+\fB-cmyk\fR \fIboolean\fR
+If true, pdf4tcl will try to generate the document in CMYK color space\&.
+See \fB::pdf4tcl::rgb2Cmyk\fR for a way to control color translation\&.
+Default value is false\&.
+This option can only be set at object creation\&.
+.TP
+\fB-compress\fR \fIboolean\fR
+Pages will be zlib compressed if this option is set to true\&.
+Default value is true\&.
+This option can only be set at object creation\&.
+.TP
+\fB-file\fR \fIfilename\fR
+Continuously write pdf to \fIfilename\fR instead of storing it
+in memory\&.
+This option can only be set at object creation\&.
+.TP
+\fB-unit\fR \fIdefaultunit\fR
+Defines default unit for coordinates and distances\&.  Any value given without
+a unit is interpreted using this unit\&.
+See \fBUNITS\fR for valid units\&.
+Default value is "p" as in points\&.
+This option can only be set at object creation\&.
+.PP
+.SS "PAGE CONFIGURATION"
+.TP
+\fB-paper\fR \fIname\fR
+The argument of this option defines the paper size\&.
+The paper size may be a string like "a4", where valid values
+are available through \fB::pdf4tcl::getPaperSizeList\fR\&.
+Paper size may also be a two element list specifying width and height\&.
+.sp
+The default value of this option is "a4"\&.
+.TP
+\fB-landscape\fR \fIboolean\fR
+If true, paper width and height are switched\&.
+.sp
+The default value of this option is false\&.
+.TP
+\fB-orient\fR \fIboolean\fR
+This sets the orientation of the y axis of the coordinate system\&.
+With \fB-orient\fR false, origin is in the bottom left corner\&.
+With \fB-orient\fR true, origin is in the top left corner\&.
+.sp
+The default value of this option is true\&.
+.TP
+\fB-margin\fR \fIvalues\fR
+The margin is a one, two or four element list of margins\&.
+For one element, it specifies all margins\&.
+Two elements specify left/right and top/bottom\&.
+Four elements specify left, right, top and bottom\&.
+.sp
+The default value of this option is zero\&.
+.TP
+\fB-rotate\fR \fIangle\fR
+This value defines a rotation angle for the display of the page\&.
+Allowed values are multiples of 90\&.
+.sp
+The default value of this option is zero\&.
+.PP
+.SH EXAMPLES
+.CS
+
+
+  pdf4tcl::new mypdf -paper a3
+  mypdf startPage
+  mypdf setFont 12 Courier
+  mypdf text "Hejsan" -x 50 -y 50
+  mypdf write -file mypdf\&.pdf
+  mypdf destroy
+
+.CE
+.SH "SEE ALSO"
+doctools
+.SH KEYWORDS
+document, pdf
+.SH COPYRIGHT
+.nf
+Copyright (c) 2007-2016 Peter Spjuth
+Copyright (c) 2009 Yaroslav Schekin
+
+.fi
diff --git a/libraries/pdf4tcl/slack-desc b/libraries/pdf4tcl/slack-desc
new file mode 100644
index 000000000000..7d33c91c44ee
--- /dev/null
+++ b/libraries/pdf4tcl/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+       |-----handy-ruler------------------------------------------------------|
+pdf4tcl: pdf4tcl (tcl package for generating pdf files)
+pdf4tcl:
+pdf4tcl: pdf4tcl is a tcl package for generating pdf files.
+pdf4tcl: It's features include compressed pdf, canvas to pdf, basic shapes,
+pdf4tcl: set stroke and fill colour, set line style, simple text strings,
+pdf4tcl: left or right aligned or centered text boxes with left or right
+pdf4tcl: aligned, centered or fully justified text, rotated text, text
+pdf4tcl: with skewed characters, use adobe standard fonts, use other
+pdf4tcl: fonts, jpeg and png images, support for raw image data, bookmarks
+pdf4tcl: and metadata, most commonly used paper dimensions.
+pdf4tcl: for more info, visit: https://pdf4tcl.sourceforge.net/