games/stella: Updated for version 6.0.2, update man page.

Signed-off-by: B. Watson <yalhcru@gmail.com>

1 files changed, 0 insertions, 1411 deletions

diff --git a/games/stella/stella.pod b/games/stella/stella.pod
deleted file mode 100644
index 908d33cc28d57..0000000000000
--- a/games/stella/stella.pod
+++ /dev/null
@@ -1,1411 +0,0 @@
-# pod source for stella man page. Convert with:
-# pod2man --stderr -s6 -cSlackBuilds.org -r5.0.2 -u stella.pod > stella.6
-
-=pod
-
-=head1 NAME
-
-stella - an Atari 2600 emulator
-
-=head1 SYNOPSIS
-
-B<stella> I<options> I<ROM file>
-
-=head1 DESCRIPTION
-
-B<stella> is a comprehensive emulator of the old Atari 2600 video-game
-console. It support most Atari 2600 games and many peripherals.
-
-If you start Stella and do not specify a ROM image, it will start in
-'ROM Launcher' mode. If this is your first time starting Stella, you
-will be asked to select the default ROM directory to use.
-
-This man page only documents the command-line options and default
-keybindings. The complete documentation is in I<index.html> and
-I<debugger.html>, usually installed in I</usr/share/doc/stella/> or
-I</usr/doc/stella-4.7.2/>.
-
-=head1 OPTIONS
-
-=over 4
-
-=item B<-video> <direct3d|opengl|opengles2|opengles|software>
-
-Use the given rendering backend (where applicable); default is the best
-available mode detected.
-
-=item B<-vsync> <1|0>
-
-Synchronize screen updates to the vertical blank period. This can
-result in smoother updates, and eliminate tearing.
-
-=item B<-fullscreen> <1|0>
-
-Enable fullscreen mode.
-
-=item B<-center> <1|0>
-
-Centers game window (if possible).
-
-=item B<-palette> <standard|z26|user>
-
-Set the palette to either normal Stella, the one used in the z26
-emulator, or a user-defined palette.
-
-=item B<-colorloss> <1|0>
-
-Enable/disable the PAL color-loss effect.
-
-=item B<-framerate> <number>
-
-Display the given number of frames per second. Normally, Stella will
-determine framerate based on number of scanlines. Setting this to 0
-automatically enables auto-frame calculation (ie, framerate based on
-scanlines).
-
-=item B<-timing> <sleep|busy>
-
-Determines type of wait to perform between processing frames. Sleep
-will release the CPU as much as possible, and is the preferred method
-on laptops (and other low-powered devices) and when using VSync. Busy
-will emulate z26 busy-wait behaviour, and use all possible CPU time,
-but may eliminate graphical 'tearing' in software mode.
-
-=item B<-uimessages> <1|0>
-
-Enable or disable display of message in the UI. Note that messages
-indicating serious errors override this setting, and are always shown.
-
-=item B<-sound> <1|0>
-
-Enable or disable sound generation.
-
-=item B<-fragsize> <number>
-
-Specify the sound fragment size to use. Linux/Mac seems to work with
-512, Windows usually needs 1024.
-
-=item B<-freq> <number>
-
-Set sound sample output frequency (11025,22050,31400,44100,48000)
-Default is 31400. Do not change unless you experience sound issues.
-
-=item B<-volume> <number>
-
-Set the volume (0 - 100).
-
-=item B<-tia.zoom> <zoom>
-
-Use the specified zoom level (integer) while in TIA/emulation mode.
-
-=item B<-tia.inter> <1|0>
-
-Use interpolation for the TIA image (results in blending/smoothing of
-the image).
-
-=item B<-tia.aspectn> <number>
-
-=item B<-tia.aspectp> <number>
-
-Specify the amount (as a percentage) to scale the TIA image width in
-NTSC and PAL mode. Since many video modes do not use square pixels, you
-can reduce width until the pixels appear square. Allowable values are
-80 - 120; I find 85 - 90 gives the most authentic look for NTSC, and
-105 - 110 for PAL.
-
-=item B<-tia.fsfill> <1|0>
-
-Stretch TIA image completely while in fullscreen mode (vs. an integral
-stretch which won't necessarily completely fill the screen).
-
-=item B<-tia.dbgcolors> <roygbp>
-
-Assigns the colours (R)ed, (O)range, (Y)ellow, (G)reen,
-(B)lue and (P)urple to each graphical register P0/M0/P1/M1/PF/BL,
-respectively. Currently, these can be changed around to apply different
-colours to the respective register.
-
-=item B<-tv.phosphor> <always|byrom>
-
-When to use phosphor mode.
-
-=item B<-tv.phosblend> <0 - 100>
-
-Set default blend level in phosphor mode.
-
-=item B<-tv.filter> <1 - 6>
-
-Blargg TV effects, 0 is disabled, next numbers in sequence represent
-presets for 'Composite', 'S-Video', 'RGB', 'Bad Adjust', and 'Custom'
-modes.
-
-=item B<-tv.scanlines> <0 - 100>
-
-Blargg TV effects scanline intensity, where 0 means completely off.
-
-=item B<-tv.scaninter> <1|0>
-
-Blargg TV effects scanline interpolation, resulting in
-blending/smoothing of the scanlines.
-
-=item B<-tv.jitter> <1|0>
-
-Enable TV jitter effect.
-
-=item B<-tv.jitter_recovery> <1 - 20>
-
-Set recovery time for TV jitter effect.
-
-=item B<-tv.contrast> <number>
-
-Blargg TV effects 'contrast' (only available in custom mode, range -1.0
-to 1.0).
-
-=item B<-tv.brightness> <number>
-
-Blargg TV effects 'brightness' (only available in custom mode, range
--1.0 to 1.0).
-
-=item B<-tv.hue> <number>
-
-Blargg TV effects 'hue' (only available in custom mode, range -1.0 to
-1.0).
-
-=item B<-tv.saturation> <number>
-
-Blargg TV effects 'saturation' (only available in custom mode, range
--1.0 to 1.0).
-
-=item B<-tv.gamma> <number>
-
-Blargg TV effects 'gamma' (only available in custom mode, range -1.0 to
-1.0).
-
-=item B<-tv.sharpness> <number>
-
-Blargg TV effects 'sharpness' (only available in custom mode, range
--1.0 to 1.0).
-
-=item B<-tv.resolution> <number>
-
-Blargg TV effects 'resolution' (only available in custom mode, range
--1.0 to 1.0).
-
-=item B<-tv.artifacts> <number>
-
-Blargg TV effects 'artifacts' (only available in custom mode, range
--1.0 to 1.0).
-
-=item B<-tv.fringing> <number>
-
-Blargg TV effects 'fringing' (only available in custom mode, range -1.0
-to 1.0).
-
-=item B<-tv.bleed> <number>
-
-Blargg TV effects 'bleed' (only available in custom mode, range -1.0 to
-1.0).
-
-=item B<-cheat> <code>
-
-Use the specified cheatcode (see Cheat section for description).
-
-=item B<-loglevel> <0|1|2>
-
-Indicates level of logging to perform while the application is running.
-Zero completely disables logging (except for serious errors), while the
-remaining numbers show increasingly more detail.
-
-=item B<-logtoconsole> <1|0>
-
-Indicates that logged output should be printed to the
-console/commandline as it's being collected. An internal log will still
-be kept, and the amount of logging is still controlled by 'loglevel'.
-
-=item B<-joydeadzone> <number>
-
-Sets the joystick axis deadzone area for joysticks/gamepads. All values
-within the deadzone are treated as zero-axis values, while only those
-values outside are registered as valid input. Accepts a number from 0 -
-29, and uses the formula 3200 + number * 1000. So the possible deadzone
-values range from 3200 to 32200.
-
-=item B<-joyallow4> <1|0>
-
-Allow all 4 directions on a joystick to be pressed simultaneously.
-Bumper Bash ignores this setting, and always allows all 4 directions.
-
-=item B<-usemouse> <always|analog|never>
-
-Use mouse as a controller as specified by ROM properties in specific
-case. Always and never are self-explanatory, analog means only for
-analog-type devices (paddles, trackball, etc).
-
-=item B<-grabmouse> <1|0>
-
-Locks the mouse cursor in the game window in emulation mode.
-
-=item B<-cursor> <0,1,2,3>
-
-Set cursor state in UI/emulation modes.
-
-=item B<-dsense> <number>
-
-Sensitivity for emulation of paddles when using a digital device (ie,
-joystick digital axis or button, keyboard key, etc). Valid range of
-values is from 1 to 20, with larger numbers causing faster movement.
-
-=item B<-msense> <number>
-
-Sensitivity for emulation of paddles when using a mouse. Valid range of
-values is from 1 to 20, with larger numbers causing faster movement.
-
-=item B<-tsense> <number>
-
-Sensitivity of mouse emulated trackball movement (1-20).
-
-=item B<-saport> <lr|rl>
-
-Determines how to enumerate the Stelladaptor/2600-daptor devices in the
-order they are found: 'lr' means first is left port, second is right
-port, 'rl' means the opposite.
-
-=item B<-ctrlcombo> <1|0>
-
-Use control-x key combos. This is normally enabled, since the Quit
-command is tied to 'Control-q'. However, there are times when a
-2-player game is using either the 'f' or 'r' keys for movement, and
-pressing Control (for Fire) will perform an unwanted action associated
-with Control-r or Control-f.
-
-=item B<-autoslot> <1|0>
-
-Automatically switch to the next available save state slot after saving
-a ROM state file.
-
-=item B<-stats> <1|0>
-
-Overlay console info on the TIA image during emulation.
-
-=item B<-fastscbios> <1|0>
-
-Disable Supercharger BIOS progress loading bars.
-
-=item B<-snapsavedir> <path>
-
-The directory to save snapshot files to.
-
-=item B<-snaploaddir> <path>
-
-The directory to load snapshot files from.
-
-=item B<-snapname> <int|rom>
-
-When saving snapshots, use either the internal database name or the
-actual ROM filename.
-
-=item B<-sssingle> <1|0>
-
-Generate single snapshot instead of many, overwriting any previous
-snapshots.
-
-=item B<-ss1x> <1|0>
-
-Ignore any scaling applied to the TIA image, and save snapshot in
-unscaled (1x) mode.
-
-=item B<-ssinterval> <number>
-
-Set the interval in seconds between taking snapshots in continuous
-snapshot mode (currently, 1 - 10).
-
-=item B<-rominfo> <rom>
-
-Display detailed information about the given ROM, and then exit Stella.
-
-=item B<-listrominfo>
-
-Prints relevant contents of the Stella ROM database, one ROM per line,
-and then exit Stella. This can be used for external frontends.
-
-=item B<-exitlauncher> <1|0>
-
-Always exit to ROM launcher when exiting a ROM (normally, an exit to
-launcher only happens when started with the launcher).
-
-=item B<-launcherres> <WxH>
-
-Set the size of the ROM launcher.
-
-=item B<-launcherfont> <small|medium|large>
-
-Set the size of the font in the ROM launcher.
-
-=item B<-launcherexts> <allfiles|allroms|LIST>
-
-Specifies which files to show in the ROM launcher ('allfiles' is
-self-explanatory, 'allroms' is all files with valid rom extensions
-(currently: a26, bin, rom, gz, zip), 'LIST' is a ':' separated list of
-valid rom extensions.
-
-=item B<-romviewer> <0|1|2>
-
-Hide ROM info viewer in ROM launcher mode (0), or use the given zoom
-level (1 or 2).
-
-=item B<-uipalette> <standard|classic>
-
-Use the specified palette for UI elements. B<classic> is green-on-black,
-B<standard> is more colorful.
-
-=item B<-listdelay> <delay>
-
-Set the amount of time to wait between treating successive keypresses
-as a single word in list widgets (value can range from 300-1000). Use
-'0' to disable list-skipping completely,
-
-=item B<-mwheel> <lines>
-
-Set the number of lines a mousewheel will scroll in the UI.
-
-=item B<-romdir> <dir>
-
-Set the directory where the ROM launcher will start.
-
-=item B<-statedir> <dir>
-
-Set the directory in which to access state files.
-
-=item B<-cheatfile> <file>
-
-Set the full pathname of the cheatfile database.
-
-=item B<-palettefile> <file>
-
-Set the full pathname of the user-defined palette file.
-
-=item B<-propsfile> <file>
-
-Set the full pathname of the ROM properties file.
-
-=item B<-nvramdir> <dir>
-
-Set the directory in which to access non-volatile (flash/EEPROM) files.
-
-=item B<-cfgdir> <dir>
-
-Set the directory in which to access Distella config files.
-
-=item B<-avoxport> <name>
-
-Set the name of the serial port where an AtariVox is connected.
-
-=item B<-maxres> <WxH>
-
-Useful for developers, this sets the maximum size of window that can be
-created, allowing to simulate testing on 'smaller' systems.
-
-=item B<-help>
-
-Prints a help message describing these options, and then exit Stella.
-
-The following are useful to developers. Only use them if you know
-what you're doing! Note that in all cases, the values supplied to
-the arguments are not case sensitive.
-
-Argument Description
-
-=item B<-dis.resolve> <1|0>
-
-Try to differentiate between code vs. data sections in the
-disassembler. See the Debugger section for more information.
-
-=item B<-dis.gfxformat> <2|16>
-
-Sets the base to use for displaying GFX sections in the disassembler.
-
-=item B<-dis.showaddr> <1|0>
-
-Shows/hides opcode addresses in the disassembler.
-
-=item B<-dis.relocate> <1|0>
-
-Relocate calls out of address range in the disassembler.
-
-=item B<-dbg.res> <WxH>
-
-Set the size of the debugger window.
-
-=item B<-dbg.fontstyle> <0|1|2|3>
-
-How to use bold fonts in the debugger window. '0' means all normal
-font, '1' is bold labels only, '2' is bold non-labels only, '3' is all
-bold font.
-
-=item B<-break> <address>
-
-Set a breakpoint at specified address.
-
-=item B<-debug>
-
-Immediately jump to debugger mode when starting Stella.
-
-=item B<-holdjoy0> <U,D,L,R,F>
-
-Start the emulator with the left joystick direction/button held down
-(ie, use 'UF' for up and fire).
-
-=item B<-holdjoy1> <U,D,L,R,F>
-
-Start the emulator with the right joystick direction/button held down
-(ie, use 'UF' for up and fire).
-
-=item B<-holdselect>
-
-Start the emulator with the Game Select switch held down.
-
-=item B<-holdreset>
-
-Start the emulator with the Game Reset switch held down.
-
-=item B<-tiadriven> <1|0>
-
-Set unused TIA pins to be randomly driven high or low on a read/peek.
-If disabled, use the last databus value for those pins instead.
-
-=item B<-cpurandom> <S,A,X,Y,P>
-
-On reset, randomize the content of the specified CPU registers.
-
-=item B<-ramrandom> <1|0>
-
-On reset, either randomize all RAM content, or zero it out instead.
-
-=item B<-bs> <type>
-
-Set "Cartridge.Type" property. See the Game Properties section for
-valid types.
-
-=item B<-type> <type>
-
-Same as using -bs.
-
-=item B<-channels> <Mono|Stereo>
-
-Set "Cartridge.Sound" property.
-
-=item B<-ld> <A|B>
-
-Set "Console.LeftDifficulty" property.
-
-=item B<-rd> <A|B>
-
-Set "Console.RightDifficulty" property.
-
-=item B<-tv> <Color|BW>
-
-Set "Console.TelevisionType" property.
-
-=item B<-sp> <Yes|No>
-
-Set "Console.SwapPorts" property.
-
-=item B<-lc> <type>
-
-Set "Controller.Left" property. See the Game Properties section for
-valid types.
-
-=item B<-rc> <type>
-
-Set "Controller.Right" property. See the Game Properties section for
-valid types.
-
-=item B<-bc> <type>
-
-Sets both "Controller.Left" and "Controller.Right" properties. See the
-Game Properties section for valid types.
-
-=item B<-cp> <Yes|No>
-
-Set "Controller.SwapPaddles" property.
-
-=item B<-ma> <Auto|XY>
-
-Set "Controller.MouseAxis" property. See the Game Properties section
-for valid types.
-
-=item B<-format> <format>
-
-Set "Display.Format" property. See the Game Properties section for
-valid formats.
-
-=item B<-ystart> <number>
-
-Set "Display.YStart" property (0 - 64).
-
-=item B<-height> <number>
-
-Set "Display.Height" property (210 - 256).
-
-=item B<-pp> <Yes|No>
-
-Set "Display.Phosphor" property.
-
-=item B<-ppblend> <number>
-
-Set "Display.PPBlend" property, used for phosphor effect (0-100).
-Default is 77.
-
-=item B<-thumb.trapfatal> <1|0>
-
-The default of true allows the Thumb ARM emulation to throw an
-exception and enter the debugger on fatal errors. When disabled, such
-fatal errors are simply logged, and emulation continues. Do not use
-this unless you know exactly what you're doing, as it changes the
-behaviour as compared to real hardware. Note that Thumb ARM emulation
-only applies to the BUS, CDF, and DPC+ cartridge types.
-
-=back
-
-=head1 KEYBOARD
-
-The Atari 2600 console controls and controllers are mapped to the
-computer's keyboard as shown in the following tables. However, most of
-these events can be remapped to other keys on your keyboard or buttons
-on your joystick (see B<Advanced Configuration - Event Remapping> in
-the HTML documentation). The tables below show the default settings.
-
-=head2 Console Controls (can be remapped)
-
-=over 4
-
-=item B<Control + q>
-
-Exit emulator
-
-=item B<Escape>
-
-Exit game mode/enter launcher mode
-
-=item B<Tab>
-
-Enter/exit options mode
-
-=item B<Backslash (\)>
-
-Enter/exit command mode
-
-=item B<Backquote (`)>
-
-Enter/exit debugger
-
-=item B<F1>
-
-Select Game
-
-=item B<F2>
-
-Reset Game
-
-=item B<F3>
-
-Color TV
-
-=item B<F4>
-
-Black/White TV
-
-=item B<F5>
-
-Left Player Difficulty A
-
-=item B<F6>
-
-Left Player Difficulty B
-
-=item B<F7>
-
-Right Player Difficulty A
-
-=item B<F8>
-
-Right Player Difficulty B
-
-=item B<F9>
-
-Save state to current slot
-
-=item B<F10>
-
-Change current state slot
-
-=item B<F11>
-
-Load state from current slot
-
-=item B<F12>
-
-Save PNG snapshot
-
-=item B<Pause>
-
-Pause/resume emulation
-
-=back
-
-=head2 Joystick / BoosterGrip Controller (can be remapped)
-
-=head3 Left Joystick (Joy0)
-
-=over 4
-
-=item B<Up arrow>
-
-Joystick Up
-
-=item B<Down arrow>
-
-Joystick Down
-
-=item B<Left arrow>
-
-Joystick Left
-
-=item B<Right arrow>
-
-Joystick Right
-
-=item B<Space>
-
-Fire Button
-
-=item B<4>
-
-Trigger Button
-
-=item B<5>
-
-Booster Button
-
-=back
-
-=head3 Right Joystick (Joy1)
-
-=over 4
-
-=item B<Y>
-
-Joystick Up
-
-=item B<H>
-
-Joystick Down
-
-=item B<G>
-
-Joystick Left
-
-=item B<J>
-
-Joystick Right
-
-=item B<F>
-
-Fire Button
-
-=item B<6>
-
-Trigger Button
-
-=item B<7>
-
-Booster Button
-
-=back
-
-=head2 Paddle Controller digital emulation (can be remapped independently of joystick controller)
-
-=head3 Left Paddles
-
-=over 4
-
-=item B<Same as 'Joy0 Left'>
-
-Paddle 0 decrease
-
-=item B<Same as 'Joy0 Right'>
-
-Paddle 0 increase
-
-=item B<Same as 'Joy0 Fire'>
-
-Paddle 0 Fire
-
-=item B<Same as 'Joy0 Up'>
-
-Paddle 1 decrease
-
-=item B<Same as 'Joy0 Down'>
-
-Paddle 1 increase
-
-=item B<Same as 'Joy0 Booster'>
-
-Paddle 1 Fire
-
-=back
-
-=head3 Right Paddles
-
-=over 4
-
-=item B<Same as 'Joy1 Left'>
-
-Paddle 2 decrease
-
-=item B<Same as 'Joy1 Right'>
-
-Paddle 2 increase
-
-=item B<Same as 'Joy1 Fire'>
-
-Paddle 2 Fire
-
-=item B<Same as 'Joy1 Up'>
-
-Paddle 3 decrease
-
-=item B<Same as 'Joy1 Down'>
-
-Paddle 3 increase
-
-=item B<Same as 'Joy1 Booster'>
-
-Paddle 3 Fire
-
-=back
-
-=head2 Driving Controller (cannot be remapped, always associated with joystick controller)
-
-=head3 Left Driving
-
-=over 4
-
-=item B<Same as 'Joy0 Left'>
-
-Left Direction
-
-=item B<Same as 'Joy0 Right'>
-
-Right Direction
-
-=item B<Same as 'Joy0 Fire'>
-
-Fire Button
-
-=back
-
-=head3 Right Driving
-
-=over 4
-
-=item B<Same as 'Joy1 Left'>
-
-Left Direction
-
-=item B<Same as 'Joy1 Right'>
-
-Right Direction
-
-=item B<Same as 'Joy1 Fire'>
-
-Fire Button
-
-=back
-
-=head2 Sega Genesis Controller (cannot be remapped, always associated with joystick and booster-grip controllers)
-
-=head3 Left Pad
-
-=over 4
-
-=item B<Same as 'Joy0 Up'>
-
-Pad Up
-
-=item B<Same as 'Joy0 Down'>
-
-Pad Down
-
-=item B<Same as 'Joy0 Left'>
-
-Pad Left
-
-=item B<Same as 'Joy0 Right'>
-
-Pad Right
-
-=item B<Same as 'Joy0 Fire'>
-
-Button 'B'
-
-=item B<Same as 'Joy0 Booster'>
-
-Button 'C'
-
-=back
-
-=head3 Right Pad
-
-=over 4
-
-=item B<Same as 'Joy1 Up'>
-
-Pad Up
-
-=item B<Same as 'Joy1 Down'>
-
-Pad Down
-
-=item B<Same as 'Joy1 Left'>
-
-Pad Left
-
-=item B<Same as 'Joy1 Right'>
-
-Pad Right
-
-=item B<Same as 'Joy1 Fire'>
-
-Button 'B'
-
-=item B<Same as 'Joy1 Booster'>
-
-Button 'C'
-
-=back
-
-=head2 Keypad Controller (can be remapped)
-
-=head3 Left Keypad
-
-=over 4
-
-=item B<1>
-
-1
-
-=item B<2>
-
-2
-
-=item B<3>
-
-3
-
-=item B<Q>
-
-4
-
-=item B<W>
-
-5
-
-=item B<E>
-
-6
-
-=item B<A>
-
-7
-
-=item B<S>
-
-8
-
-=item B<D>
-
-9
-
-=item B<Z>
-
-.
-
-=item B<X>
-
-0
-
-=item B<C>
-
-#
-
-=back
-
-=head3 Right Keypad
-
-=over 4
-
-=item B<8>
-
-1
-
-=item B<9>
-
-2
-
-=item B<0>
-
-3
-
-=item B<I>
-
-4
-
-=item B<O>
-
-5
-
-=item B<P>
-
-6
-
-=item B<K>
-
-7
-
-=item B<L>
-
-8
-
-=item B<;>
-
-9
-
-=item B<,>
-
-.
-
-=item B<.>
-
-0
-
-=item B</>
-
-#
-
-=back
-
-=head2 CompuMate Controller (cannot be remapped)
-
-=over 4
-
-=item B< 0 - 9>
-
-0 - 9
-
-=item B< A - Z>
-
-A - Z
-
-=item B< Comma>
-
-Comma
-
-=item B< Period>
-
-Period
-
-=item B< Control (left or right)>
-
-Func
-
-=item B< Shift (left or right)>
-
-Shift
-
-=item B< Return/Enter>
-
-Enter
-
-=item B< Space>
-
-Space
-
-=item B< Backspace>
-
-Func-Space
-
-=item B< + or Shift-1>
-
-+
-
-=item B< - or Shift-2>
-
--
-
-=item B< Shift-3>
-
-*
-
-=item B< / or Shift-4>
-
-/
-
-=item B< = or Shift-5>
-
-=
-
-=item B< ? (Shift-/) or Shift-6>
-
-?
-
-=item B< Shift-7>
-
-$
-
-=item B< [ or Shift-8>
-
-[
-
-=item B< ] or Shift-9>
-
-]
-
-=item B< " (Shift-') or Shift-0>
-
-"
-
-=back
-
-=head2 TV effects (cannot be remapped, only active in TIA mode)
-
-=over 4
-
-=item B<Alt + 1>
-
-Disable TV effects
-
-=item B<Alt + 2>
-
-Select 'Composite' preset
-
-=item B<Alt + 3>
-
-Select 'S-video' preset
-
-=item B<Alt + 4>
-
-Select 'RGB' preset
-
-=item B<Alt + 5>
-
-Select 'Badly adjusted' preset
-
-=item B<Alt + 6>
-
-Select 'Custom' preset
-
-=item B<Shift-Alt + 7>
-
-Decrease scanline intensity
-
-=item B<Alt + 7>
-
-Increase scanline intensity
-
-=item B<Shift-Alt + 8>
-
-Disable scanline interpolation
-
-=item B<Alt + 8>
-
-Enable scanline interpolation
-
-=item B<Shift-Alt + 9>
-
-Select previous 'Custom' mode attribute (*)
-
-=item B<Alt + 9>
-
-Select next 'Custom' mode attribute (*)
-
-=item B<Shift-Alt + 0>
-
-Decrease 'Custom' selected attribute value (*)
-
-=item B<Alt + 0>
-
-Increase 'Custom' selected attribute value (*)
-
-=back
-
-Items marked as (*) are only available in 'Custom' preset mode
-
-=head2 Developer Keys in TIA mode (cannot be remapped)
-
-=over
-
-=item B<Alt + PageUp>
-
-Set "Display.YStart" to next larger value
-
-=item B<Alt + PageDown>
-
-Set "Display.YStart" to next smaller value
-
-=item B<Control + PageUp>
-
-Set "Display.Height" to next larger value
-
-=item B<Control + PageDown>
-
-Set "Display.Height" to next smaller value
-
-=item B<Alt + l>
-
-Toggle frame stats (scanline count/fps/bs type/etc)
-
-=item B<Alt + z>
-
-Toggle TIA Player0 object
-
-=item B<Alt + x>
-
-Toggle TIA Player1 object
-
-=item B<Alt + c>
-
-Toggle TIA Missile0 object
-
-=item B<Alt + v>
-
-Toggle TIA Missile1 object
-
-=item B<Alt + b>
-
-Toggle TIA Ball object
-
-=item B<Alt + n>
-
-Toggle TIA Playfield object
-
-=item B<Shift-Alt + z>
-
-Toggle TIA Player0 collisions
-
-=item B<Shift-Alt + x>
-
-Toggle TIA Player1 collisions
-
-=item B<Shift-Alt + c>
-
-Toggle TIA Missile0 collisions
-
-=item B<Shift-Alt + v>
-
-Toggle TIA Missile1 collisions
-
-=item B<Shift-Alt + b>
-
-Toggle TIA Ball collisions
-
-=item B<Shift-Alt + n>
-
-Toggle TIA Playfield collisions
-
-=item B<Alt + m>
-
-Toggle TIA HMOVE blanks
-
-=item B<Alt + Comma>
-
-Toggle TIA 'Fixed Debug Colors' mode
-
-=item B<Alt + .>
-
-Toggle all TIA objects
-
-=item B<Shift-Alt + .>
-
-Toggle all TIA collisions
-
-=back
-
-=head2 Other Keys (cannot be remapped, except those marked with '*')
-
-=over 4
-
-=item B<Alt + =>
-
-Switch to next larger zoom level
-
-=item B<Alt + ->
-
-Switch to next smaller zoom level
-
-=item B<Alt + Enter>
-
-Toggle fullscreen/windowed mode
-
-=item B<Alt + [>
-
-Decrease volume (*)
-
-=item B<Alt + ]>
-
-Increase volume (*)
-
-=item B<Control + f>
-
-Toggle console type in increasing order (NTSC/PAL/SECAM, etc))
-
-=item B<Shift-Control + f>
-
-Toggle console type in decreasing order (NTSC/PAL/SECAM, etc))
-
-=item B<Control + s>
-
-Save current properties to a new properties file
-
-=item B<Control + 0>
-
-Switch mouse between controller emulation modes
-
-=item B<Control + 1>
-
-Swap Stelladaptor/2600-daptor port ordering
-
-=item B<Control + r>
-
-Reload current ROM (singlecart ROM, TIA mode) or Load next game in ROM (multicart ROM, TIA mode)
-
-=item B<Control + r>
-
-Reload ROM listing (ROM launcher mode)
-
-=item B<Backspace>
-
-Emulate 'frying' effect (TIA mode) (*), Go to parent directory (UI mode) (*)
-=item B<Alt + p>
-
-Toggle 'phosphor' effect
-
-=item B<Control + p>
-
-Toggle palette
-
-=item B<Control + l>
-
-Toggle PAL color-loss effect
-
-=item B<Alt + s>
-
-Save continuous PNG snapshots (per interval)
-
-=item B<Shift-Alt + s>
-
-Save continuous PNG snapshots (every frame)
-
-=back
-
-=head2 UI keys in Text Editing areas (cannot be remapped)
-
-=over 4
-
-=item B<Home>
-
-Move cursor to beginning of line
-
-=item B<End>
-
-Move cursor to end of line
-
-=item B<Delete>
-
-Remove character to right of cursor
-
-=item B<Backspace>
-
-Remove character to left of cursor
-
-=item B<Control-a>
-
-Same function as 'Home'
-
-=item B<Control-e>
-
-Same function as 'End'
-
-=item B<Control-d>
-
-Same function as 'Delete'
-
-=item B<Control-k>
-
-Remove all characters from cursor to end of line
-
-=item B<Control-u>
-
-Remove all characters from cursor to beginning of line
-
-=item B<Control-w>
-
-Remove entire word to left of cursor
-
-=item B<Control-Left>
-
-Move cursor to beginning of word to the left
-
-=item B<Control-Right>
-
-Move cursor to beginning of word to the right
-
-=item B<Control-c>
-
-Copy entire line to clipboard (not complete)
-
-=item B<Control-v>
-
-Paste clipboard contents (not complete)
-
-=back
-
-=head1 FILES
-
-Starting with 5.0, B<stella> uses B<$HOME/.config/stella/> as
-the per-user config directory. Previous versions used B<$HOME/.stella/>.
-
-The config directory contains the following:
-
-=over 4
-
-=item B<stellarc>
-
-The Stella config file, created by B<stella>. May be hand-edited, but
-normally the built-in GUI is used to set these options.
-
-=item B<cfg/>
-
-Directory for DiStella config files, used only by the debugger.
-
-=item B<nvram/>
-
-Directory used to store the contents of non-volatile cartridge memory.
-
-=item B<state/>
-
-Directory used to store save-states (see B<F9> key).
-
-=back
-
-=head1 AUTHORS
-
-Stella was originally developed for Linux by Bradford W. Mott
-<bwmott@users.sourceforge.net>, and is currently maintained by Stephen
-Anthony <stephena@users.sourceforge.net>. Other contributors include
-Eckhard Stolberg <estolberg@users.sourceforge.net> and Brian Watson
-<yalhcru@gmail.com>.
-
-=head1 SEE ALSO
-
-Stella web site: I<http://stella.sourceforge.net/>.