development/bed: Added (ncurses-based binary/hex editor).

Signed-off-by: David Spencer <idlemoor@slackbuilds.org>

7 files changed, 271 insertions, 0 deletions

diff --git a/development/bed/README b/development/bed/README
new file mode 100644
index 0000000000000..131653ade9508
--- /dev/null
+++ b/development/bed/README
@@ -0,0 +1,16 @@
+bed (ncurses-based adjustable data format binary/hex editor)
+
+Bed is a binary editor that supports editing/viewing data in a wide
+variety of formats, including ASCII, unsigned and signed integers, float,
+bit-flags, bit-fields, labels, EBCDIC and time_t. Different sizes and
+byte orderings are possible. Data types can be used in structures. Other
+data formats, filters and procedures can be defined in plugins.
+
+Notes:
+
+- bed starts up in Ascii input mode. Press F7 to switch to "Digit-Hex" entry
+  mode. If this doesn't work, see the next note.
+
+- bed makes extensive use of Meta key combinations and the F-keys.
+  It's pretty sensitive to the terminal type and $TERM setting being used.
+  See README_SBo.txt if you have trouble with the keyboard commands.
diff --git a/development/bed/README_SBo.txt b/development/bed/README_SBo.txt
new file mode 100644
index 0000000000000..14ca70df8704c
--- /dev/null
+++ b/development/bed/README_SBo.txt
@@ -0,0 +1,38 @@
+These terminals and TERM settings were tested and work fine:
+
+Terminal         TERM    Notes
+---------------+-------+------------------------------------------------
+Linux console  | linux | Default TERM setting.
+rxvt           | rxvt  | Default TERM setting.
+urxvt          | rxvt  | But *not* the default of "rxvt-unicode"!
+xterm          | xterm | Or "xterm-color". Enable "meta sends escape",
+               |       | or use Escape as the meta key.
+xcfe4-terminal | xterm | Works, but e.g. Alt-F activates the terminal's
+               |       | own "File" menu, so you have to use Esc-F for
+               |       | bed's "File" menu. Default TERM setting.
+konsole        | xterm | Default TERM setting.
+
+See also the TERMINALS section of bed's man page.
+
+Two quick things to test, the first time you start up bed:
+
+F7 and F8 should switch between Ascii and Digit-Hex input modes in the
+status bar at the bottom of the screen. If they don't, try running bed as
+'TERM=rxvt bed' or 'TERM=xterm-color bed'. If this works, you can define
+it as a shell alias in e.g. ~/.bash_profile. If you're launching bed
+from the KDE or XFCE start menu, you can likely force TERM from within
+bed's config file (~/.bedrc or /usr/lib64/bed-3.0.0/bedrc).
+
+Alt-X should exit the program. If it doesn't (if it does nothing, or does
+some other function like moving the cursor), try pressing Escape followed
+by X. If this works, you can either use Escape instead of the Alt key for
+all "Meta" commands, or else reconfigure your terminal. In xterm, this
+can be done with the ctrl-leftclick menu (enable "Meta Sends Escape"),
+or set xterm's metaSendsEscape and/or altSendsEscape resources to 'true'
+in ~/.Xdefaults.
+
+It should be possible to define a set of keybinds for bed that work with
+any terminal and TERM, with "bed -k ~/.bedrc". No, I don't know what a
+"stab" key is, either (just pick an otherwise-unused keystroke for it).
+I also don't know why it asks you to press the various keys in a seemingly
+random order... but it does work.
diff --git a/development/bed/bed-binary-editor.desktop b/development/bed/bed-binary-editor.desktop
new file mode 100644
index 0000000000000..cd0052e8cd57e
--- /dev/null
+++ b/development/bed/bed-binary-editor.desktop
@@ -0,0 +1,12 @@
+[Desktop Entry]
+Name=Bed - Binary Editor
+Name[nl]=Bed - Binaire Editor
+GenericName=Binary Editor
+GenericName[nl]=Binaire Editor
+Comment=Adjustable dataformat: ascii,integer,unsigned,float,struct
+Comment[nl]=Instelbaar datatype: ascii,integer,unsigned,float,struct
+Exec=bed %U
+Terminal=true
+Type=Application
+Categories=Development;
+StartupNotify=true
diff --git a/development/bed/bed.SlackBuild b/development/bed/bed.SlackBuild
new file mode 100644
index 0000000000000..37bae15312879
--- /dev/null
+++ b/development/bed/bed.SlackBuild
@@ -0,0 +1,157 @@
+#!/bin/sh
+
+# Slackware build script for bed
+
+# Written by B. Watson (yalhcru@gmail.com)
+
+# Licensed under the WTFPL. See http://www.wtfpl.net/txt/copying/ for details.
+
+PRGNAM=bed
+VERSION=${VERSION:-3.0.0}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.src.tar.xz
+cd $PRGNAM-$VERSION
+
+# Ships as a broken symlink... gets recreated during the build anyway.
+rm -f ./plugins/mainprocedures.h
+
+# The permissions are a bit wonky (a few executable C source files) but
+# no harm done.
+chown -R root:root .
+find -L .  -perm /111 -a \! -perm 755 -a -exec chmod 755 {} \+ -o \
+        \! -perm /111 -a \! -perm 644 -a -exec chmod 644 {} \+
+
+# I found the startup message confusing, it says "Alt-X to open menu",
+# where X is used in the algebra sense (to mean "whatever"). I kept
+# expecting a literal Alt-X to mean "open menu", when it really means
+# "exit". So:
+sed -i '/Press F1 in menu/s/X/[x]/g' plugins/examples/helpf1.cc
+
+# Not sure the --without-x does anything, but it doesn't hurt either.
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --without-x \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --build=$ARCH-slackware-linux
+
+# Hardcoded -O3 here:
+sed -i "s/-O3/$SLKCFLAGS/g" plugins/examples/Makefile
+
+# Source ships pregenerated versions of these that were made on a
+# cygwin system. They break the build.
+rm -f src/dataproc.h src/dataprocer.h
+
+# The Makefile hates -jN where N>1.
+
+# The TOBUILD* stuff below is because we said
+# "--build=$ARCH-slackware-linux" as usual in the ./configure
+# above, and bed is expecting there to be an actual compiler called
+# $ARCH-slackware-linux-cc in $PATH, which there ain't. If we were
+# cross-compiling, this would have to be solved some other way.
+
+# Regenerate the 2 headers removed above, plus one more that fails
+# to be generated for whatever reason.
+make -j1 -C src TOBUILDCC=gcc TOBUILDCXX=g++ OPTIM="$SLKCFLAGS" \
+      dataproc.h dataprocer.h helptext.h
+
+# *Now* we can compile for real.
+make -j1 TOBUILDCC=gcc TOBUILDCXX=g++ OPTIM="$SLKCFLAGS"
+
+# No 'install-strip' target, but the binary's installed stripped
+# and the man page is gzipped already.
+make -j1 install DESTDIR=$PKG
+
+# Lot of stuff below uses this
+PKGBEDLIB=$PKG/usr/lib$LIBDIRSUFFIX/$PRGNAM-$VERSION
+
+# Replace .desktop file with cleaned-up version that passes
+# desktop-file-validate. There's no icon defined in the file, nor shipped
+# with bed, so I'm leaving that as-is. The desktop menu specification
+# doesn't have a HexEditor or even a generic Editor category (which IMO
+# is a symptom of how broken the thinking behind the specification is),
+# so I had to pick between the generic System and slightly-less-generic
+# Development categories...
+DT=bed-binary-editor.desktop
+cat $CWD/$DT > $PKG/usr/share/applications/$DT
+
+# The rxvt stuff (rxvt.plug) doesn't get built by this script. The build
+# process is too horrendous and baroque for me to spend more time trying
+# to understand why. The default config file tries to load rxvt.plug and
+# shows a scary but harmless "rxvt.plug: cannot open shared object file"
+# error on startup, so I'm just going to disable it in the config.
+
+# In case you're wondering, the editor's fully functional without the
+# plugin. What it actually does is allows you to adjust the terminal
+# bed is running in (the font size, set reverse video, and disable the
+# scrollbar) from within bed. Most (all?) terminals already supply their
+# own ways to do these things, so this is really extra fluff.
+RC=$PKGBEDLIB/bedrc
+sed -e 's/^ *plugin *rxvt\.plug/#&/' \
+    -e 's/^ *menuitem  *8/#&/' \
+    $RC > $RC.new
+rm -f $RC
+
+# The magic stuff for file. doinst.sh handles the rest.
+mkdir -p $PKG/etc/file/magic
+mv $PKGBEDLIB/bedmagic $PKG/etc/file/magic
+rm -f $PKGBEDLIB/bedmagic.short $PKGBEDLIB/addmagic
+
+# Don't want this (use removepkg instead):
+rm -f $PKGBEDLIB/uninstallbed.sh
+
+# There's still some cruft in $PKGBEDLIB (e.g. sources for the plugins),
+# but it's stuff that could be considered documentation so I'll leave it.
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+for i in LICENSE README; do
+  ln -s ../../lib$LIBDIRSUFFIX/$PRGNAM-$VERSION/$i $PKG/usr/doc/$PRGNAM-$VERSION
+done
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n -p $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/development/bed/bed.info b/development/bed/bed.info
new file mode 100644
index 0000000000000..0c5b414a16a84
--- /dev/null
+++ b/development/bed/bed.info
@@ -0,0 +1,10 @@
+PRGNAM="bed"
+VERSION="3.0.0"
+HOMEPAGE="https://www.dse.nl/~bed/"
+DOWNLOAD="https://www.dse.nl/~bed/download/bed-3.0.0.src.tar.xz"
+MD5SUM="cd2f49434d673bd4f124b6cb1d1a1dbd"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="B. Watson"
+EMAIL="yalhcru@gmail.com"
diff --git a/development/bed/doinst.sh b/development/bed/doinst.sh
new file mode 100644
index 0000000000000..765706c116bf8
--- /dev/null
+++ b/development/bed/doinst.sh
@@ -0,0 +1,19 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    rm $NEW
+  fi
+}
+
+config usr/share/bed/bedrc.new
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -x etc/file/recompile_magic.mgc.sh ]; then
+  etc/file/recompile_magic.mgc.sh
+fi
diff --git a/development/bed/slack-desc b/development/bed/slack-desc
new file mode 100644
index 0000000000000..a286353d05a51
--- /dev/null
+++ b/development/bed/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+   |-----handy-ruler------------------------------------------------------|
+bed: bed (ncurses-based adjustable data format binary/hex editor)
+bed:
+bed: Bed is a binary editor that supports editing/viewing data in a wide
+bed: variety of formats, including ASCII, unsigned and signed integers,
+bed: float, bit-flags, bit-fields, labels, EBCDIC and time_t. Different
+bed: sizes and byte orderings are possible. Data types can be used in
+bed: structures. Other data formats, filters and procedures can be defined
+bed: in plugins.
+bed:
+bed:
+bed: