desktop/bar: Added (lightweight bar based on XCB)

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

6 files changed, 445 insertions, 0 deletions

diff --git a/desktop/bar/README b/desktop/bar/README
new file mode 100644
index 0000000000000..35db41b5b4b45
--- /dev/null
+++ b/desktop/bar/README
@@ -0,0 +1,5 @@
+bar - bar ain't recursive
+
+bar is a lightweight bar entirely based on XCB. Provides full UTF-8 support,
+basic formatting, RandR and Xinerama support and EWMH compliance without
+wasting your precious memory.
diff --git a/desktop/bar/bar.SlackBuild b/desktop/bar/bar.SlackBuild
new file mode 100644
index 0000000000000..71971ed2a26cc
--- /dev/null
+++ b/desktop/bar/bar.SlackBuild
@@ -0,0 +1,98 @@
+#!/bin/sh
+
+# Slackware build script for bar - bar ain't recursive
+
+# Copyright 2014 John Vogel Corning, NY USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=bar
+VERSION=${VERSION:-1.0}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+if [ ! -f $CWD/$PRGNAM-$VERSION.tar.gz ]; then
+  if [ -f $CWD/v$VERSION.tar.gz ]; then
+    mv $CWD/v$VERSION.tar.gz $CWD/$PRGNAM-$VERSION.tar.gz
+  fi
+fi
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+# add monitor option for ordering and selective inclusion
+patch -p1 < $CWD/patches/bar-monitor-option.patch
+
+# adjust CFLAGS in Makefile to accept SLKCFLAGS
+patch -p1 < $CWD/patches/bar-Makefile-CFLAGS.patch
+
+CFLAGS="$SLKCFLAGS" make
+make doc
+install -D -m 755 bar $PKG/usr/bin/bar
+install -D -m 644 bar.1 $PKG/usr/man/man1/bar.1
+
+gzip -9 $PKG/usr/man/man1/bar.1
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a LICENSE README.pod $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/desktop/bar/bar.info b/desktop/bar/bar.info
new file mode 100644
index 0000000000000..dd758ad88fb5f
--- /dev/null
+++ b/desktop/bar/bar.info
@@ -0,0 +1,10 @@
+PRGNAM="bar"
+VERSION="1.0"
+HOMEPAGE="https://github.com/LemonBoy/bar"
+DOWNLOAD="https://github.com/LemonBoy/bar/archive/v1.0.tar.gz"
+MD5SUM="cb4a18b3784ae6f0e106b2171c2bed6e"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="John Vogel"
+EMAIL="jvogel4@stny.rr.com"
diff --git a/desktop/bar/patches/bar-Makefile-CFLAGS.patch b/desktop/bar/patches/bar-Makefile-CFLAGS.patch
new file mode 100644
index 0000000000000..bef2cba8fff64
--- /dev/null
+++ b/desktop/bar/patches/bar-Makefile-CFLAGS.patch
@@ -0,0 +1,13 @@
+diff --git a/Makefile b/Makefile
+index ff620a8..01b6bf9 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1,6 +1,7 @@
+ CC	?= gcc
+ STRIP ?= strip
+-CFLAGS = -std=c99 -Os
++CFLAGS ?= -Os
++CFLAGS += -std=c99
+ LDFLAGS = -lxcb -lxcb-xinerama -lxcb-randr
+ CFDEBUG = -g3 -pedantic -Wall -Wunused-parameter -Wlong-long\
+ 		  -Wsign-conversion -Wconversion -Wimplicit-function-declaration
diff --git a/desktop/bar/patches/bar-monitor-option.patch b/desktop/bar/patches/bar-monitor-option.patch
new file mode 100644
index 0000000000000..d5c5fafa0d14c
--- /dev/null
+++ b/desktop/bar/patches/bar-monitor-option.patch
@@ -0,0 +1,300 @@
+diff --git a/README.pod b/README.pod
+index 565f188..2d2075d 100644
+--- a/README.pod
++++ b/README.pod
+@@ -4,7 +4,7 @@ bar - bar ain't recursive
+ 
+ =head1 SYNOPSIS
+ 
+-I<bar> [-h | -g I<width>B<x>I<height>B<+>I<x> | -b | -d | -f I<font> | -p | -u I<pixel> | -B I<color> | -F I<color>]
++I<bar> [-h | -g I<width>B<x>I<height>B<+>I<x> | -m I<monitor>B<:>I<monitor>B<:>... | -b | -d | -f I<font> | -p | -u I<pixel> | -B I<color> | -F I<color>]
+ 
+ =head1 DESCRIPTION
+ 
+@@ -22,6 +22,10 @@ Display the help and exit.
+ 
+ Set the window geometry. If a parameter is omitted it's filled with the default value.
+ 
++=item B<-m> I<monitor>B<:>I<monitor>B<:>I<...>
++
++Set monitors to be used and in what order. Positive numeric arguments only, separated by colons.
++
+ =item B<-b>
+ 
+ Dock the bar at the bottom of the screen.
+diff --git a/bar.c b/bar.c
+index 1ccc907..0f9f694 100644
+--- a/bar.c
++++ b/bar.c
+@@ -17,6 +17,8 @@
+ #define max(a,b) ((a) > (b) ? (a) : (b))
+ #define min(a,b) ((a) < (b) ? (a) : (b))
+ #define indexof(c,s) (strchr((s),(c))-(s))
++#define MONITORS_MAX 32
++#define N 10
+ 
+ typedef struct font_t {
+     xcb_font_t ptr;
+@@ -39,8 +41,6 @@ typedef struct area_t {
+     char *cmd;
+ } area_t;
+ 
+-#define N 10
+-
+ typedef struct area_stack_t {
+     int pos;
+     area_t slot[N];
+@@ -80,6 +80,9 @@ static char *mfont, *afont;
+ static uint32_t fgc, bgc, ugc;
+ static uint32_t dfgc, dbgc;
+ static area_stack_t astack;
++static uint32_t mons = 0;
++static int nmons = 0;
++static int monlist[MONITORS_MAX];
+ 
+ void
+ update_gc (void)
+@@ -302,7 +305,8 @@ parse (char *text)
+ 
+     memset(&astack, 0, sizeof(area_stack_t));
+ 
+-    fill_rect(cur_mon->pixmap, gc[GC_CLEAR], 0, 0, bw, bh);
++    for (monitor_t *m = monhead; m; m = m->next)
++        fill_rect(m->pixmap, gc[GC_CLEAR], 0, 0, bw, bh);
+ 
+     for (;;) {
+         if (*p == '\0' || *p == '\n')
+@@ -356,7 +360,6 @@ parse (char *text)
+ 
+                               p++;
+                               pos_x = 0;
+-                              fill_rect(cur_mon->pixmap, gc[GC_CLEAR], 0, 0, cur_mon->width, bh);
+                               break;
+ 
+                     /* In case of error keep parsing after the closing } */
+@@ -562,14 +565,40 @@ rect_sort_cb (const void *p1, const void *p2)
+ void
+ monitor_create_chain (xcb_rectangle_t *rects, const int num)
+ {
+-    int width = bw;
++    int i, cnt;
++    int width = 0;
+     int left = bx;
+ 
+     /* Sort before use */
+     qsort(rects, num, sizeof(xcb_rectangle_t), rect_sort_cb);
+ 
++    if (nmons) {
++        xcb_rectangle_t r[num];
++        /* Get combined width of specified monitors and set aside specified monitors */
++        for (i = cnt = 0; i < nmons; i++) {
++            if (monlist[i] >= num) {
++                fprintf(stderr, "Specified monitor %d not found\n", monlist[i]);
++                continue;
++            }
++            width += rects[monlist[i]].width;
++            memcpy(&r[cnt++], &rects[monlist[i]], sizeof(xcb_rectangle_t));
++        }
++        memcpy(rects, r, cnt * sizeof(xcb_rectangle_t));
++    }
++    else {
++        /* Else default to X screen width */
++        width = scr->width_in_pixels;
++        cnt = num;
++    }
++
++    /* If I fits I sits */
++    if (bw < 0)
++        bw = width - bx;
++    else
++        width = bw - bx;
++
+     /* Left is a positive number or zero therefore monitors with zero width are excluded */
+-    for (int i = 0; i < num; i++) {
++    for (int i = 0; i < cnt; i++) {
+         if (rects[i].width > left) {
+             monitor_t *mon = monitor_new(
+                     rects[i].x + left,
+@@ -598,7 +627,7 @@ get_randr_monitors (void)
+ {
+     xcb_randr_get_screen_resources_current_reply_t *rres_reply;
+     xcb_randr_output_t *outputs;
+-    int num, valid = 0;
++    int i, j, num, valid = 0;
+ 
+     rres_reply = xcb_randr_get_screen_resources_current_reply(c,
+             xcb_randr_get_screen_resources_current(c, scr->root), NULL);
+@@ -621,7 +650,7 @@ get_randr_monitors (void)
+     xcb_rectangle_t rects[num];
+ 
+     /* Get all outputs */
+-    for (int i = 0; i < num; i++) {
++    for (i = 0; i < num; i++) {
+         xcb_randr_get_output_info_reply_t *oi_reply;
+         xcb_randr_get_crtc_info_reply_t *ci_reply;
+ 
+@@ -657,11 +686,11 @@ get_randr_monitors (void)
+     free(rres_reply);
+ 
+     /* Check for clones and inactive outputs */
+-    for (int i = 0; i < num; i++) {
++    for (i = 0; i < num; i++) {
+         if (rects[i].width == 0)
+             continue;
+ 
+-        for (int j = 0; j < num; j++) {
++        for (j = 0; j < num; j++) {
+             /* Does I countain J ? */
+ 
+             if (i != j && rects[j].width) {
+@@ -679,7 +708,20 @@ get_randr_monitors (void)
+         return;
+     }
+ 
++    /* Use allocated array to pass to monitor_create_chain, the dynamic will out of scope */
++    xcb_rectangle_t *r = malloc(valid * sizeof(xcb_rectangle_t));
++    if (!r) {
++        fprintf(stderr, "Malloc failed!\n");
++        exit(EXIT_FAILURE);
++    }
++
++    /* Copy only used monitors */
++    for (i = j = 0; i < num && j < valid; i++)
++        if (rects[i].width)
++            memcpy(&r[j++], &rects[i], sizeof(xcb_rectangle_t));
++
+     monitor_create_chain(rects, num);
++    free(r);
+ }
+ 
+ void
+@@ -695,7 +737,11 @@ get_xinerama_monitors (void)
+     iter = xcb_xinerama_query_screens_screen_info_iterator(xqs_reply);
+     screens = iter.rem;
+ 
+-    xcb_rectangle_t rects[screens];
++    xcb_rectangle_t *rects = malloc(screens * sizeof(xcb_rectangle_t));
++    if (!rects) {
++        fprintf(stderr, "Malloc failed!\n");
++        exit(EXIT_FAILURE);
++    }
+ 
+     /* Fetch all the screens first */
+     for (int i = 0; iter.rem; i++) {
+@@ -709,6 +755,7 @@ get_xinerama_monitors (void)
+     free(xqs_reply);
+ 
+     monitor_create_chain(rects, screens);
++    free(rects);
+ }
+ 
+ xcb_visualid_t
+@@ -755,10 +802,6 @@ xconn (void)
+ void
+ init (void)
+ {
+-    /* If I fits I sits */
+-    if (bw < 0)
+-        bw = scr->width_in_pixels - bx;
+-
+     /* Load the fonts */
+     main_font = font_load(mfont ? mfont : "fixed");
+     if (!main_font)
+@@ -801,9 +844,14 @@ init (void)
+         }
+     }
+ 
+-    if (!monhead)
++    if (!monhead) {
++        /* If I fits I sits */
++        if (bw < 0)
++            bw = scr->width_in_pixels - bx;
++
+         /* If no RandR outputs or Xinerama screens, fall back to using whole screen */
+         monhead = monitor_new(0, 0, bw, scr->height_in_pixels);
++    }
+ 
+     if (!monhead)
+         exit(EXIT_FAILURE);
+@@ -921,6 +969,44 @@ parse_geometry_string (char *str, int *tmp)
+     return true;
+ }
+ 
++bool
++parse_monitor_string (char *str)
++{
++    char *p = str;
++    int i = 0, j;
++
++    if (!str || !*str)
++        return false;
++
++    while (*p) {
++        /* Skip separator */
++        if (*p == ':' || *p == ',')
++            if (!*++p)
++                break;
++        /* A digit must follow */
++        if (!isdigit(*p)) {
++            fprintf(stderr, "Invalid monitor specified\n");
++            return false;
++        }
++        /* Try to parse the number */
++        errno = 0;
++        j = strtoul(p, &p, 10);
++        if (errno || j >= MONITORS_MAX) {
++            fprintf(stderr, "Monitor value out of range\n");
++            return false;
++        }
++
++        if (j >= MONITORS_MAX || j < 0) {
++            fprintf(stderr, "Invalid monitor specified: %d\n", j);
++            continue;
++        }
++        mons |= 1 << j;
++        monlist[nmons++] = j;
++    }
++
++    return true;
++}
++
+ void
+ parse_font_list (char *str)
+ {
+@@ -968,12 +1054,13 @@ main (int argc, char **argv)
+     ugc = fgc;
+ 
+     char ch;
+-    while ((ch = getopt(argc, argv, "hg:bdf:a:pu:B:F:")) != -1) {
++    while ((ch = getopt(argc, argv, "hg:m:bdf:a:pu:B:F:")) != -1) {
+         switch (ch) {
+             case 'h':
+-                printf ("usage: %s [-h | -g | -b | -d | -f | -a | -p | -u | -B | -F]\n"
++                printf ("usage: %s [-h | -g | -m | -b | -d | -f | -a | -p | -u | -B | -F]\n"
+                         "\t-h Show this help\n"
+                         "\t-g Set the bar geometry {width}x{height})\n"
++                        "\t-m Set monitors to use and in what order {0:2:1...}\n"
+                         "\t-b Put bar at the bottom of the screen\n"
+                         "\t-d Force docking (use this if your WM isn't EWMH compliant)\n"
+                         "\t-f Bar font list, comma separated\n"
+@@ -983,6 +1070,7 @@ main (int argc, char **argv)
+                         "\t-F Set foreground color in #AARRGGBB\n", argv[0]);
+                 exit (EXIT_SUCCESS);
+             case 'g': (void)parse_geometry_string(optarg, geom_v); break;
++            case 'm': (void)parse_monitor_string(optarg); break;
+             case 'p': permanent = true; break;
+             case 'b': topbar = false; break;
+             case 'd': dock = true; break;
+@@ -998,12 +1086,6 @@ main (int argc, char **argv)
+     bh = geom_v[1];
+     bx = geom_v[2];
+ 
+-    /* Check the geometry */
+-    if (bx >= scr->width_in_pixels || bx + bw > scr->width_in_pixels) {
+-        fprintf(stderr, "The geometry specified doesn't fit the screen!\n");
+-        return EXIT_FAILURE;
+-    }
+-
+     /* Do the heavy lifting */
+     init();
+     /* Get the fd to Xserver */
diff --git a/desktop/bar/slack-desc b/desktop/bar/slack-desc
new file mode 100644
index 0000000000000..4a206cf45dd66
--- /dev/null
+++ b/desktop/bar/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+   |-----handy-ruler------------------------------------------------------|
+bar: bar (lightweight bar based on XCB)
+bar:
+bar: bar - bar ain't recursive
+bar:
+bar: bar is a lightweight bar entirely based on XCB. Provides full UTF-8
+bar: support, basic formatting, RandR and Xinerama support and EWMH
+bar: compliance without wasting your precious memory.
+bar:
+bar: Homepage: https://github.com/LemonBoy/bar
+bar:
+bar: