audio/volume.app: Added (windowmaker volume control dockapp).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

5 files changed, 177 insertions, 0 deletions

diff --git a/audio/volume.app/README b/audio/volume.app/README
new file mode 100644
index 000000000000..56a635125db9
--- /dev/null
+++ b/audio/volume.app/README
@@ -0,0 +1,29 @@
+==========================================================================
+Volume.app -- a simple windowmaker volume control dockapp
+==========================================================================
+
+This is a simple volume control for the AfterStep / BlackBox / Window
+Maker dock. Volume.app is intended to be an extremely simple, efficient, and
+attractive interface to a system's sound mixer.
+
+Currently, only OSS mixer interface is supported. ALSA mixer can be used through 
+ALSA's OSS emulation.
+
+
+
+==========================================================================
+NOTE1: look into "config.h.in" to set some options as needed;
+
+NOTE2: If the system is on "ALSA's OSS emulation" and the app didn't run OK,
+       remove the package and re-create it with those procedures:
+
+       'cat /proc/asound/oss/sndstat' and search the "Mixers" section.
+        locate the desired 'mixer number' and then modify file "config.h.in",
+        at "DEFAULT_MIXER_DEVICE" parameter. Then, re-create the package.
+      
+        Eg: if desired mixer is "2", modify "config.h.in" as below:
+       
+            DEFAULT_MIXER_DEVICE "/dev/mixer"
+               ( to )
+            DEFAULT_MIXER_DEVICE "/dev/mixer2"
+==========================================================================
diff --git a/audio/volume.app/config.h.in b/audio/volume.app/config.h.in
new file mode 100644
index 000000000000..7bba141e6c36
--- /dev/null
+++ b/audio/volume.app/config.h.in
@@ -0,0 +1,27 @@
+/* config.h */
+
+#define _GNU_SOURCE
+#define VERSION "@VERSION@"
+
+#ifndef DEBUG
+#define NDEBUG
+#endif
+
+/* All these settings should eventually be configurable via libPropList */
+
+/* Note that within the program, the first source is 0 and not 1
+ */
+#define DEFAULT_SOURCE 0
+
+#define DEFAULT_MIXER_DEVICE "/dev/mixer"
+
+/* units: seconds
+ */
+#define MAX_DOUBLE_CLICK_TIME 0.5
+
+/* X11 wheel button codes (for wheel mice)
+ */
+#define BUTTON_WHEEL_UP 4
+#define BUTTON_WHEEL_DOWN 5
+
+/* end config.h */
diff --git a/audio/volume.app/slack-desc b/audio/volume.app/slack-desc
new file mode 100644
index 000000000000..881b59f4d74e
--- /dev/null
+++ b/audio/volume.app/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+          |-----handy-ruler------------------------------------------------------|
+volume.app: volume.app (a simple windowmaker volume control dockapp)
+volume.app:
+volume.app: This is a simple volume control for the AfterStep / BlackBox /
+volume.app: Window Maker dock. Volume.app is intended to be an extremely 
+volume.app: simple, efficient, and attractive interface to a system's
+volume.app: sound mixer.
+volume.app: 
+volume.app: Currently, only OSS mixer interface is supported. But...
+volume.app: ALSA mixer can be used through ALSA's OSS emulation.
+volume.app:
+volume.app:
diff --git a/audio/volume.app/volume.app.SlackBuild b/audio/volume.app/volume.app.SlackBuild
new file mode 100644
index 000000000000..74a2a2bb3b71
--- /dev/null
+++ b/audio/volume.app/volume.app.SlackBuild
@@ -0,0 +1,92 @@
+#!/bin/sh
+
+# Slackware build script for Volume.app
+
+# Copyright (c) 2014, Yanes Checcacci Balod <yanes@pobox.com>, Brazil
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=volume.app
+VERSION=${VERSION:-1.1a}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/volume-app-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+sed -i "s|/usr/local|/usr/|" Makefile
+
+# by default, this is the same file as in source
+# if you are using ALSA, you need to edit this file as stated in README
+# before proceeding
+cp $CWD/config.h.in .
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+make
+make install PREFIX=$PKG/usr
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a AUTHORS COPYING ChangeLog INSTALL README TODO $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/audio/volume.app/volume.app.info b/audio/volume.app/volume.app.info
new file mode 100644
index 000000000000..686682f4a87f
--- /dev/null
+++ b/audio/volume.app/volume.app.info
@@ -0,0 +1,10 @@
+PRGNAM="volume.app"
+VERSION="1.1a"
+HOMEPAGE="http://volume-app.sourceforge.net/"
+DOWNLOAD="http://sourceforge.net/projects/volume-app/files/volume-app/1.1a/volume-app-1.1a.tar.gz"
+MD5SUM="4c1b180fa54e90e113fa8a1c02e660f2"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Yanes Checcacci Balod"
+EMAIL="yanes@pobox.com"