audio/alsa-tools: Updated for version 1.0.27.

Signed-off-by: Niels Horn <niels.horn@slackbuilds.org>

3 files changed, 76 insertions, 41 deletions

diff --git a/audio/alsa-tools/README b/audio/alsa-tools/README
index 4d2f15ff7e4e4..a08fa787cdb24 100644
--- a/audio/alsa-tools/README
+++ b/audio/alsa-tools/README
@@ -11,30 +11,43 @@ with the alsa-tools source). Also included is the SlackBuild author's
 
 Included tools:
 
-ac3dec - simple AC3 stream decoder
-as10k1 - assembler for the emu10k1 DSP chip present in Creative soundcards
-cspctl - Sound Blaster 16 ASP/CSP control program
-dl10k1 - loads dumps previously created with lo10k1 & ld10k1
-echomixer - Linux equivalent of the Echoaudio console application
-envy24control - Control tool for Envy24 (ice1712) based soundcards
-extract_ac3 - extract AC3 streams from VOB files
-hdspconf - GUI to control the Hammerfall HDSP Alsa Settings
-hdsploader - firmware loader for the RME Hammerfall DSP cards
-hdspmixer - Linux equivalent of the Totalmix application from RME
-hwmixvolume - hardware mixer control for cards using hardware mixing
-init_audigy, init_audigy_eq10, init_live - initialize Creative cards
-ld10k1 - dump patches stored in an EMU10K1/EMU10K2 card
-ld10k1d - daemon for lo10k1
-lo10k1 - EMU10K1 (EMU10K2) patch loader for ALSA
-mixartloader - Firmware loader for Digigram miXart soundcards
-pcxhrloader - Firmware loader for Digigram pcxhr compatible soundcards
-qlo10k1 - GUI for loading patches on EMU10K1/EMU10K2 cards
-rmedigicontrol - control tool for RME Digi32 and RME Digi96 soundcards
-sbiload - OPL2/3 FM instrument loader for ALSA hwdep
-sscape_ctl - ALSA SoundScape control utility
-us428control - Tascam US-428 control surface daemon
-usx2yloader - 2nd Phase Firmware loader for Tascam USX2Y USB soundcards
-vxloader - Firmware loader for Digigram VX soundcards
-
-One of the tools (qlo10k1) uses Qt3. If you need this tool, install qt3,
-and pass QT3=yes in the environment for alsa-tools.SlackBuild.
+  as10k1 - assembler for emu10k1 DSP chip present in Creative soundcards
+  cspctl - Sound Blaster 16 ASP/CSP control program
+  dl10k1 - loads dumps previously created with lo10k1 & ld10k1
+* echomixer - Linux equivalent of the Echoaudio console application
+* envy24control - Control tool for Envy24 (ice1712) based soundcards
+  hda-verb - send a HD-audio command to an intel-hda hwdep device
+* hdajackretask - retask the hardware jacks on intel-hda devices
+* hdspconf - GUI to control the Hammerfall HDSP Alsa Settings
+  hdsploader - firmware loader for the RME Hammerfall DSP cards
+* hdspmixer - Linux equivalent of the Totalmix application from RME
+  hwmixvolume - hardware mixer control for cards using hardware mixing
+  init_audigy, init_audigy_eq10, init_live - initialize Creative cards
+  ld10k1 - dump patches stored in an EMU10K1/EMU10K2 card
+  ld10k1d - daemon for lo10k1
+  lo10k1 - EMU10K1 (EMU10K2) patch loader for ALSA
+  mixartloader - Firmware loader for Digigram miXart soundcards
+  pcxhrloader - Firmware loader for Digigram pcxhr compatible soundcards
+* qlo10k1 - GUI for loading patches on EMU10K1/EMU10K2 cards
+* rmedigicontrol - control tool for RME Digi32 and RME Digi96 soundcards
+  sbiload - OPL2/3 FM instrument loader for ALSA hwdep
+  sscape_ctl - ALSA SoundScape control utility
+  us428control - Tascam US-428 control surface daemon
+  usx2yloader - 2nd Phase Firmware loader for Tascam USX2Y USB soundcards
+  vxloader - Firmware loader for Digigram VX soundcards
+
+(Older versions included the tools "ac3dec" and "extract_ac3", which
+were removed from 1.0.27, probably for legal reasons)
+
+Tools marked with an * are GUI tools that require X. To build on an X-less
+system, set GUI=no in the environment.
+
+Optional dependencies:
+
+qt3 - only used for qlo10k1 tool (used for loading patches into emu10k1
+      cards with a hardware MIDI synth). This tool won't be built, if
+      qt3 is not installed (or QT3=no or GUI=no is set in the environment).
+
+fltk - only used for the hdspconf and hdspmixer tools (only useful for
+       Hammerfall HDSP cards). This tool won't be built, if fltk is not
+       installed (or FLTK=no or GUI=no is set in the environment).
diff --git a/audio/alsa-tools/alsa-tools.SlackBuild b/audio/alsa-tools/alsa-tools.SlackBuild
index 893f855438882..f3ce60bec4d10 100644
--- a/audio/alsa-tools/alsa-tools.SlackBuild
+++ b/audio/alsa-tools/alsa-tools.SlackBuild
@@ -4,7 +4,7 @@
 
 # Written by B. Watson (yalhcru@gmail.com)
 
-# Licensed under the WTFPL. See http://sam.zoy.org/wtfpl/ for details.
+# Licensed under the WTFPL. See http://www.wtfpl.net/txt/copying/ for details.
 
 # I am *not* going to create separate packages for each of the individual
 # tools, as some distros do. They're small enough that it's worth the
@@ -14,7 +14,7 @@
 # *** I agree.  --rworkman   :-)
 
 PRGNAM=alsa-tools
-VERSION=${VERSION:-1.0.26.1}
+VERSION=${VERSION:-1.0.27}
 BUILD=${BUILD:-2}
 TAG=${TAG:-_SBo}
 
@@ -48,7 +48,7 @@ fi
 set -e
 
 FIRMWARE=alsa-firmware
-FIRMVER=1.0.25
+FIRMVER=1.0.27
 
 rm -rf $PKG
 mkdir -p $TMP $PKG $OUTPUT
@@ -68,24 +68,41 @@ find . \
 
 mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
 
+# allow disabling all the GUI apps
+if [ "${GUI:-yes}" != "yes" ]; then
+  QT3=no
+  FLTK=no
+  rm -rf echomixer envy24control hdajackretask rmedigicontrol
+fi
+
 # qlo10k1 depends on Qt3, which no longer ships with Slackware.
 # This supports the SBo qt3 build. It's not enough to source qt.sh,
 # the qt3 bin directories need to come first in $PATH too.
 # If you got your Qt3 from some other source, you may have to
 # fiddle with QTDIR and PATH yourself.
-if [ "${QT3:-no}" = "yes" ]; then
+if [ -e /opt/kde3/lib$LIBDIRSUFFIX/qt3 -a "${QT3:-yes}" = "yes" ]; then
   source /etc/profile.d/qt.sh
-  export PATH=/opt/kde3/lib/qt3/bin:/opt/kde3/bin:$PATH
+  export PATH=/opt/kde3/lib$LIBDIRSUFFIX/qt3/bin:/opt/kde3/bin:$PATH
 else
   rm -rf qlo10k1
 fi
 
-# one loop to build them all
+# hdspconf and hdspmixer depend on fltk. Don't build them if disabled or
+# not installed.
+if [ -e /usr/bin/fltk-config -a "${FLTK:-yes}" = "yes" ]; then
+  : do nothing
+else
+  rm -rf hdspconf hdspmixer
+fi
+
+# one loop to build them all. The -include stddef.h fixes qlo10k1 'ptrdiff_t doesn't
+# name a type' errors, and doesn't hurt anything else.
 for subdir in $( find . -name configure | sed -e 's,^\./,,' -e 's,/configure,,' ); do
   cd $subdir
 
+  LDFLAGS="-L/usr/lib$LIBDIRSUFFIX" \
   CFLAGS="$SLKCFLAGS" \
-  CXXFLAGS="$SLKCFLAGS" \
+  CXXFLAGS="$SLKCFLAGS -include stddef.h" \
   ./configure \
     --prefix=/usr \
     --libdir=/usr/lib${LIBDIRSUFFIX} \
@@ -130,7 +147,12 @@ CXXFLAGS="$SLKCFLAGS" \
 make
 make install-strip DESTDIR=$PKG
 
-# remove the hotplug scripts, since Slackware 13.37 doesn't use hotplug.
+# Niels Horn pointed out that some of the firmware shipped with this
+# package conflicts with Slackware's kernel-firmware package. The files
+# are identical, so just leave them out of this build.
+( cd $PKG/lib/firmware ; rm -rf ess korg sb16 yamaha )
+
+# remove the hotplug scripts, since Slackware 13.37 & up doesn't use hotplug.
 # Instead, they've been converted to udev rules.
 rm -rf $PKG/etc/hotplug
 
diff --git a/audio/alsa-tools/alsa-tools.info b/audio/alsa-tools/alsa-tools.info
index 66eb28300de3b..d2c5603c85634 100644
--- a/audio/alsa-tools/alsa-tools.info
+++ b/audio/alsa-tools/alsa-tools.info
@@ -1,12 +1,12 @@
 PRGNAM="alsa-tools"
-VERSION="1.0.26.1"
+VERSION="1.0.27"
 HOMEPAGE="http://www.alsa-project.org/"
-DOWNLOAD="http://alsa.cybermirror.org/tools/alsa-tools-1.0.26.1.tar.bz2 \
-          http://alsa.cybermirror.org/firmware/alsa-firmware-1.0.25.tar.bz2"
-MD5SUM="805526ea5d6c40e1f2c94cee86141230 \
-        f1939da45b162c83a726c54a470ef139"
+DOWNLOAD="http://alsa.cybermirror.org/tools/alsa-tools-1.0.27.tar.bz2 \
+          http://alsa.cybermirror.org/firmware/alsa-firmware-1.0.27.tar.bz2"
+MD5SUM="1ea381d00a6069a98613aa7effa4cb51 \
+        b373b350d5151dd7d64db2fc12936b04"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
-REQUIRES="fltk"
+REQUIRES=""
 MAINTAINER="B. Watson"
 EMAIL="yalhcru@gmail.com"