network/rtl-wifi: Removed from 12.2 repository

6 files changed, 0 insertions, 682 deletions

diff --git a/network/rtl-wifi/README b/network/rtl-wifi/README
deleted file mode 100644
index efc7db71f508..000000000000
--- a/network/rtl-wifi/README
+++ /dev/null
@@ -1,26 +0,0 @@
-rtl-wifi driver SVN release
-
-This script is tested using the svn code from 20080522 and a patch to make it work with the 2.6.24 kernel.
-
-This package provides support to Realtek Wifi cards based on rtl8180 chipsets.
-
-It will compile and install the following modules:
-  ieee80211_crypt-rtl
-  ieee80211_crypt_wep-rtl
-  ieee80211_crypt_tkip-rtl
-  ieee80211_crypt_ccmp-rtl
-  ieee80211-rtl
-  r8180
-
-The rtl-wifi installation instructions indicate that you must remove the 
-stock kernel's ieee80211 and mac80211 modules prior to installing
-this package.  While this is not something we prefer to do, if you need
-this package, you might feel differently.  The instructions suggest the
-following:
-  rm -rf /lib/modules/<kernel_version>/kernel/net/ieee80211
-  rm -rf /lib/modules/<kernel_version>/kernel/net/mac80211
-We recommend that you move these two directories elsewhere instead so that
-you can easily restore them in the event that you no longer need the
-rtl-wifi package.  Be sure to run "depmod -a" after adding or removing
-kernel modules.
-For more information, see http://rtl-wifi.sourceforge.net/wiki/Installing
diff --git a/network/rtl-wifi/doinst.sh b/network/rtl-wifi/doinst.sh
deleted file mode 100644
index dee3bd1a85ce..000000000000
--- a/network/rtl-wifi/doinst.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-if [ -x sbin/depmod ]; then
-  chroot . /sbin/depmod -a 1> /dev/null 2> /dev/null
-fi
-  
diff --git a/network/rtl-wifi/patch_2_6_24.diff b/network/rtl-wifi/patch_2_6_24.diff
deleted file mode 100644
index e13feae1c11b..000000000000
--- a/network/rtl-wifi/patch_2_6_24.diff
+++ /dev/null
@@ -1,536 +0,0 @@
-diff -U 3 -Nar o/ieee80211/ieee80211_crypt_tkip.c n/ieee80211/ieee80211_crypt_tkip.c
---- o/ieee80211/ieee80211_crypt_tkip.c	2008-02-16 13:47:42.000000000 +0300
-+++ n/ieee80211/ieee80211_crypt_tkip.c	2008-02-16 14:12:34.000000000 +0300
-@@ -412,9 +412,13 @@
- 	icv[3] = crc >> 24;
- 
- 	crypto_blkcipher_setkey(tkey->tx_tfm_arc4, rc4key, 16);
-+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))	
- 	sg.page = virt_to_page(pos);
- 	sg.offset = offset_in_page(pos);
- 	sg.length = len + 4;
-+#else
-+	sg_init_one(&sg, pos, len + 4);
-+#endif
- #if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18)
- 	return crypto_blkcipher_encrypt(&desc, &sg, &sg, len + 4);
- #else
-@@ -512,9 +516,13 @@
- 	plen = skb->len - hdr_len - 12;
- 
- 	crypto_blkcipher_setkey(tkey->rx_tfm_arc4, rc4key, 16);
-+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))	
- 	sg.page = virt_to_page(pos);
- 	sg.offset = offset_in_page(pos);
- 	sg.length = plen + 4;
-+#else
-+	sg_init_one(&sg, pos, plen + 4);
-+#endif
- #if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18)
- 	if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4)) {
- #else
-@@ -572,6 +580,7 @@
- 		printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
- 		return -1;
- 	}
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)	
- 	sg[0].page = virt_to_page(hdr);
- 	sg[0].offset = offset_in_page(hdr);
- 	sg[0].length = 16;
-@@ -579,6 +588,11 @@
- 	sg[1].page = virt_to_page(data);
- 	sg[1].offset = offset_in_page(data);
- 	sg[1].length = data_len;
-+#else
-+	sg_init_table(sg, 2);
-+	sg_set_buf(&sg[0], hdr, 16);
-+	sg_set_buf(&sg[1], data, data_len);
-+#endif
- 
- #if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18)
- 	if (crypto_hash_setkey(tfm_michael, key, 8))
-diff -U 3 -Nar o/ieee80211/ieee80211_crypt_wep.c n/ieee80211/ieee80211_crypt_wep.c
---- o/ieee80211/ieee80211_crypt_wep.c	2008-02-16 13:47:42.000000000 +0300
-+++ n/ieee80211/ieee80211_crypt_wep.c	2008-02-16 14:16:59.000000000 +0300
-@@ -187,9 +187,13 @@
- 	icv[3] = crc >> 24;
- 
- 	crypto_blkcipher_setkey(wep->tx_tfm, key, klen);
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)	
- 	sg.page = virt_to_page(pos);
- 	sg.offset = offset_in_page(pos);
- 	sg.length = len + 4;
-+#else
-+	sg_init_one(&sg, pos, len + 4);
-+#endif
- #if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18)
- 	return crypto_blkcipher_encrypt(&desc, &sg, &sg, len + 4);
- #else
-@@ -235,9 +239,13 @@
- 	plen = skb->len - hdr_len - 8;
- 
- 	crypto_blkcipher_setkey(wep->rx_tfm, key, klen);
-+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))	
- 	sg.page = virt_to_page(pos);
- 	sg.offset = offset_in_page(pos);
- 	sg.length = plen + 4;
-+#else
-+	sg_init_one(&sg, pos, plen + 4);
-+#endif
- #if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18)
- 	if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4))
- #else
-diff -U 3 -Nar o/rtl8187-dev/ieee80211_crypt_wep.c n/rtl8187-dev/ieee80211_crypt_wep.c
---- o/rtl8187-dev/ieee80211_crypt_wep.c	2008-02-16 13:47:45.000000000 +0300
-+++ n/rtl8187-dev/ieee80211_crypt_wep.c	2008-02-16 21:24:09.000000000 +0300
-@@ -64,7 +64,12 @@
- 	u8 key[WEP_KEY_LEN + 1];
- 	u8 key_len;
- 	u8 key_idx;
-+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
- 	struct crypto_tfm *tfm;
-+#else
-+	struct crypto_blkcipher *tx_tfm;
-+	struct crypto_blkcipher *rx_tfm;
-+#endif
- };
- 
- 
-@@ -85,19 +90,38 @@
- 	memset(priv, 0, sizeof(*priv));
- 	priv->key_idx = keyidx;
- 
-+	
-+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
- 	priv->tfm = crypto_alloc_tfm("arc4", 0);
- 	if (priv->tfm == NULL) {
--		printk(KERN_DEBUG "ieee80211_crypt_wep: could not allocate "
--		       "crypto API arc4\n");
--		goto fail;
-+	    printk(KERN_DEBUG "ieee80211_crypt_wep: could not allocate "
-+		"crypto API arc4\n");
-+	    goto fail;
- 	}
--
-+#else
-+	priv->tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC);
-+	if (IS_ERR(priv->tx_tfm)) {
-+	    printk(KERN_DEBUG "ieee80211_crypt_wep: could not allocate "
-+		"crypto API arc4\n");
-+	    priv->tx_tfm = NULL;
-+	    goto fail;
-+	}
-+	priv->rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC);
-+	if (IS_ERR(priv->rx_tfm)) {
-+	    printk(KERN_DEBUG "ieee80211_crypt_wep: could not allocate "
-+		"crypto API arc4\n");
-+	    priv->rx_tfm = NULL;
-+	    goto fail;
-+	}
-+#endif
-+							
- 	/* start WEP IV from a random value */
- 	get_random_bytes(&priv->iv, 4);
- 
- 	return priv;
- 
- fail:
-+	#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
- 	if (priv) {
- 		if (priv->tfm)
- 			crypto_free_tfm(priv->tfm);
-@@ -107,8 +131,17 @@
- 	module_put(THIS_MODULE);
- #else
- 	MOD_DEC_USE_COUNT;
--#endif
-+#endif 
-+	#else
-+	if (priv) {
-+	    if (priv->tx_tfm)
-+		crypto_free_blkcipher(priv->tx_tfm);
-+	    if (priv->rx_tfm)
-+		crypto_free_blkcipher(priv->rx_tfm);
-+	    kfree(priv);
-+	}
- 
-+	#endif
- 	return NULL;
- }
- 
-@@ -116,8 +149,18 @@
- static void prism2_wep_deinit(void *priv)
- {
- 	struct prism2_wep_data *_priv = priv;
--	if (_priv && _priv->tfm)
--		crypto_free_tfm(_priv->tfm);
-+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
-+    if (_priv && _priv->tfm)
-+    crypto_free_tfm(_priv->tfm);
-+#else
-+    if (_priv) {
-+	if (_priv->tx_tfm)
-+	    crypto_free_blkcipher(_priv->tx_tfm);
-+        if (_priv->rx_tfm)
-+	    crypto_free_blkcipher(_priv->rx_tfm);
-+    }
-+#endif
-+			
- 	kfree(priv);
- #ifdef NEW_MODULE_CODE
- 	module_put(THIS_MODULE);
-@@ -136,6 +179,10 @@
- static int prism2_wep_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
- {
- 	struct prism2_wep_data *wep = priv;
-+#if(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21))
-+	struct blkcipher_desc desc = {.tfm = wep->tx_tfm};
-+#endif
-+
- 	u32 crc, klen, len;
- 	u8 key[WEP_KEY_LEN + 3];
- 	u8 *pos, *icv;
-@@ -180,13 +227,24 @@
- 	icv[2] = crc >> 16;
- 	icv[3] = crc >> 24;
- 
-+	#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
- 	crypto_cipher_setkey(wep->tfm, key, klen);
- 	sg.page = virt_to_page(pos);
- 	sg.offset = offset_in_page(pos);
- 	sg.length = len + 4;
- 	crypto_cipher_encrypt(wep->tfm, &sg, &sg, len + 4);
--
- 	return 0;
-+	#else
-+	crypto_blkcipher_setkey(wep->tx_tfm, key, klen);
-+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
-+	sg.page = virt_to_page(pos);
-+	sg.offset = offset_in_page(pos);
-+	sg.length = len + 4;
-+#else
-+	sg_init_one(&sg, pos, len + 4);
-+#endif
-+	return crypto_blkcipher_encrypt(&desc, &sg, &sg, len + 4);
-+	#endif
- }
- 
- 
-@@ -200,6 +258,9 @@
- static int prism2_wep_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
- {
- 	struct prism2_wep_data *wep = priv;
-+#if(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21))
-+	struct blkcipher_desc desc = {.tfm = wep->rx_tfm};
-+#endif
- 	u32 crc, klen, plen;
- 	u8 key[WEP_KEY_LEN + 3];
- 	u8 keyidx, *pos, icv[4];
-@@ -224,11 +285,24 @@
- 	/* Apply RC4 to data and compute CRC32 over decrypted data */
- 	plen = skb->len - hdr_len - 8;
- 
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
- 	crypto_cipher_setkey(wep->tfm, key, klen);
- 	sg.page = virt_to_page(pos);
- 	sg.offset = offset_in_page(pos);
- 	sg.length = plen + 4;
- 	crypto_cipher_decrypt(wep->tfm, &sg, &sg, plen + 4);
-+#else
-+	crypto_blkcipher_setkey(wep->rx_tfm, key, klen);
-+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
-+	sg.page = virt_to_page(pos);
-+	sg.offset = offset_in_page(pos);
-+	sg.length = plen + 4;
-+#else
-+	sg_init_one(&sg, pos, plen + 4);
-+#endif
-+	if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4))
-+		return -7;
-+#endif
- 
- 	crc = ~crc32_le(~0, pos, plen);
- 	icv[0] = crc;
-diff -U 3 -Nar o/rtl8187-dev/ieee80211_module.c n/rtl8187-dev/ieee80211_module.c
---- o/rtl8187-dev/ieee80211_module.c	2008-02-16 13:47:45.000000000 +0300
-+++ n/rtl8187-dev/ieee80211_module.c	2008-02-16 18:50:10.000000000 +0300
-@@ -670,8 +670,14 @@
- 	ieee->associate_timer.function = ieee80211_associate_abort_;
- /*	init_waitqueue_head(&ieee->assoc_queue);
- 	ieee->workqueue = create_workqueue(DRV_NAME);*/
-+/* Below is had to be discussed !!! */	
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))	
- 	INIT_WORK(&ieee->associate_wq,(void(*)(void*)) ieee80211_associate_step1,ieee);
- 	INIT_WORK(&ieee->associate_complete_wq,(void(*)(void*)) ieee80211_associate_complete,ieee);
-+#else
-+	INIT_WORK(&ieee->associate_wq,(void(*)(void*)) ieee80211_associate_step1); 
-+	INIT_WORK(&ieee->associate_complete_wq,(void(*)(void*)) ieee80211_associate_complete); 
-+#endif
- 	init_htables(ieee);
- 	
- 	return ieee;
-diff -U 3 -Nar o/rtl8187-dev/ieee80211_rx.c n/rtl8187-dev/ieee80211_rx.c
---- o/rtl8187-dev/ieee80211_rx.c	2008-02-16 13:47:45.000000000 +0300
-+++ n/rtl8187-dev/ieee80211_rx.c	2008-02-16 15:01:25.000000000 +0300
-@@ -1153,8 +1153,13 @@
- 	if (skb2 != NULL) {
- 		/* send to wireless media */
- 		skb2->protocol = __constant_htons(ETH_P_802_3);
-+/* These needs to be discussed */
-+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22))		
- 		skb2->mac.raw = skb2->nh.raw = skb2->data;
-+#else
-+		skb2->mac_header= skb2->network_header = skb2->data;
- 		/* skb2->nh.raw = skb2->data + ETH_HLEN; */
-+#endif
- 		skb2->dev = dev;
- 		dev_queue_xmit(skb2);
- 	}
-diff -U 3 -Nar o/rtl8187-dev/r8187_core.c n/rtl8187-dev/r8187_core.c
---- o/rtl8187-dev/r8187_core.c	2008-02-16 13:47:45.000000000 +0300
-+++ n/rtl8187-dev/r8187_core.c	2008-02-16 21:42:41.000000000 +0300
-@@ -89,24 +89,33 @@
- static int hwseqnum = 0;
- static int hwwep = 0;
- static int channels = 0x3fff;
--
-+static int force_card = 0;
- 
- MODULE_LICENSE("GPL");
- MODULE_DEVICE_TABLE(usb, rtl8187_usb_id_tbl);
- MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
- MODULE_DESCRIPTION("Linux driver for Realtek RTL8187 WiFi cards");
--
-+#if  LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 9)
- MODULE_PARM(ifname,"s");
- MODULE_PARM_DESC(devname," Net interface name, wlan%d=default");
- 
- MODULE_PARM(hwseqnum,"i");
- MODULE_PARM_DESC(hwseqnum," Try to use hardware 802.11 header sequence numbers. Zero=default");
-+
- #if 0
- MODULE_PARM(hwwep,"i");
- MODULE_PARM_DESC(hwwep," Try to use hardware WEP support. Still broken and not available on all cards");
- #endif
- MODULE_PARM(channels,"i");
- MODULE_PARM_DESC(channels," Channel bitmask for specific locales. NYI");
-+#else
-+module_param(ifname, charp, S_IRUGO|S_IWUSR );
-+/* Uncomment following if needed */
-+/*module_param(hwseqnum,int, S_IRUGO|S_IWUSR);
-+module_param(hwwep,int, S_IRUGO|S_IWUSR);*/
-+module_param(channels,int, S_IRUGO|S_IWUSR);
-+module_param(force_card, int, S_IRUGO|S_IWUSR);
-+#endif
- 
- 
- static int __devinit rtl8187_usb_probe(struct usb_interface *intf,
-@@ -115,7 +124,9 @@
- static void __devexit rtl8187_usb_disconnect(struct usb_interface *intf);
- 
- static struct usb_driver rtl8187_usb_driver = {
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 15)    
- 	.owner		= THIS_MODULE,
-+#endif	
- 	.name		= RTL8187_MODULE_NAME,	          /* Driver name   */
- 	.id_table	= rtl8187_usb_id_tbl,	          /* PCI_ID table  */
- 	.probe		= rtl8187_usb_probe,	          /* probe fn      */
-@@ -479,13 +490,21 @@
- void rtl8180_proc_module_init(void)
- {	
- 	DMESG("Initializing proc filesystem");
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 24)	
- 	rtl8180_proc=create_proc_entry(RTL8187_MODULE_NAME, S_IFDIR, proc_net);
-+#else
-+	rtl8180_proc=create_proc_entry(RTL8187_MODULE_NAME, S_IFDIR, init_net.proc_net);
-+#endif
- }
- 
- 
- void rtl8180_proc_module_remove(void)
- {
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 24)
- 	remove_proc_entry(RTL8187_MODULE_NAME, proc_net);
-+#else
-+        remove_proc_entry(RTL8187_MODULE_NAME, init_net.proc_net);
-+#endif
- }
- 
- 
-@@ -2978,9 +2997,13 @@
- #endif
- #endif
- 
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 20)
- 	INIT_WORK(&priv->IBSS_work,(void(*)(void*)) rtl8180_IBSS_create_wq,dev);
- 	INIT_WORK(&priv->scan_work,(void(*)(void*)) rtl8180_scan_wq,dev);
--	
-+#else
-+	INIT_WORK(&priv->IBSS_work,(void(*)(void*)) rtl8180_IBSS_create_wq);
-+	INIT_WORK(&priv->scan_work,(void(*)(void*)) rtl8180_scan_wq);
-+#endif
- 	tasklet_init(&priv->irq_rx_tasklet,
- 		     (void(*)(unsigned long)) rtl8180_irq_rx_tasklet,
- 		     (unsigned long)priv);
-@@ -3973,8 +3996,10 @@
- 	struct usb_device *udev = interface_to_usbdev(intf);
- 	
- 	dev = alloc_etherdev(sizeof(*priv));
--	
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 24)
- 	SET_MODULE_OWNER(dev);
-+#endif
- 	usb_set_intfdata(intf, dev);	
- 	//pci_set_drvdata(pdev, dev);
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)	
-diff -U 3 -Nar o/rtl8187-newstack/r8187_core.c n/rtl8187-newstack/r8187_core.c
---- o/rtl8187-newstack/r8187_core.c	2008-02-16 13:47:47.000000000 +0300
-+++ n/rtl8187-newstack/r8187_core.c	2008-02-16 23:37:53.000000000 +0300
-@@ -407,13 +407,21 @@
- void rtl8180_proc_module_init(void)

- {	

- 	DMESG("Initializing proc filesystem");

-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
- 	rtl8180_proc=create_proc_entry(RTL8187_MODULE_NAME, S_IFDIR, proc_net);

-+#else
-+	rtl8180_proc=create_proc_entry(RTL8187_MODULE_NAME, S_IFDIR, init_net.proc_net);
-+#endif
- }

- 

- 

- void rtl8180_proc_module_remove(void)

- {

-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) 
- 	remove_proc_entry(RTL8187_MODULE_NAME, proc_net);

-+#else
-+	remove_proc_entry(RTL8187_MODULE_NAME, init_net.proc_net);
-+#endif
- }

- 

- 

-@@ -2407,7 +2415,9 @@
- 	

- 	dev = alloc_ieee80211(sizeof(struct r8180_priv));

- 	

-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
- 	SET_MODULE_OWNER(dev);

-+#endif	
- 	usb_set_intfdata(intf, dev);	

- 	

- 	SET_NETDEV_DEV(dev, &intf->dev);

-diff -U 3 -Nar o/rtl818x-newstack/r8180.h n/rtl818x-newstack/r8180.h
---- o/rtl818x-newstack/r8180.h	2008-02-16 13:47:49.000000000 +0300
-+++ n/rtl818x-newstack/r8180.h	2008-02-17 01:09:28.000000000 +0300
-@@ -46,13 +46,14 @@
- #include <linux/delay.h>
- #include <linux/rtnetlink.h>	//for rtnl_lock()
- #include <linux/wireless.h>
--#include <net/mac80211.h>
--#include <net/ieee80211softmac.h>
-+//#include <net/mac80211.h>
-+//#include <net/ieee80211softmac.h>
- #include <linux/timer.h>
- #include <linux/proc_fs.h>	// Necessary because we use the proc fs
- #include <linux/if_arp.h>
- #include <asm/io.h>
- #include <asm/semaphore.h>
-+#include "ieee80211.h"
- 
- #define EPROM_93c46 0
- #define EPROM_93c56 1
-@@ -244,44 +245,7 @@
- 	short ack_tx_to_ieee;
- }r8180_priv;
- 
--enum ieee80211_state {
- 
--        /* the card is not linked at all */
--        IEEE80211_NOLINK = 0,
--
--        /* IEEE80211_ASSOCIATING* are for BSS client mode
--         * the driver shall not perform RX filtering unless
--         * the state is LINKED.
--         * The driver shall just check for the state LINKED and
--         * defaults to NOLINK for ALL the other states (including
--         * LINKED_SCANNING)
--         */
--
--        /* the association procedure will start (wq scheduling)*/
--        IEEE80211_ASSOCIATING,
--        IEEE80211_ASSOCIATING_RETRY,
--
--        /* the association procedure is sending AUTH request*/
--        IEEE80211_ASSOCIATING_AUTHENTICATING,
--  
--        /* the association procedure has successfully authentcated
--         * and is sending association request
--         */
--        IEEE80211_ASSOCIATING_AUTHENTICATED,
--
--        /* the link is ok. the card associated to a BSS or linked
--         * to a ibss cell or acting as an AP and creating the bss
--         */
--        IEEE80211_LINKED,
--
--        /* same as LINKED, but the driver shall apply RX filter
--         * rules as we are in NO_LINK mode. As the card is still
--         * logically linked, but it is doing a syncro site survey
--         * then it will be back to LINKED state.
--         */
--        IEEE80211_LINKED_SCANNING,
--
--};
- 
- #define BEACON_PRIORITY 3
- #define LOW_PRIORITY 1
-diff -U 3 -Nar o/rtl818x-newstack/r8180_core.c n/rtl818x-newstack/r8180_core.c
---- o/rtl818x-newstack/r8180_core.c	2008-02-16 13:47:49.000000000 +0300
-+++ n/rtl818x-newstack/r8180_core.c	2008-02-17 01:30:29.000000000 +0300
-@@ -529,13 +529,21 @@
- void rtl8180_proc_module_init(void)
- {	
- 	DMESG("Initializing proc filesystem");
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))	
- 	rtl8180_proc=create_proc_entry(RTL8180_MODULE_NAME, S_IFDIR, proc_net);
-+#else
-+	rtl8180_proc=create_proc_entry(RTL8180_MODULE_NAME, S_IFDIR, init_net.proc_net); 
-+#endif
- }
- 
- 
- void rtl8180_proc_module_remove(void)
- {
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) 
- 	remove_proc_entry(RTL8180_MODULE_NAME, proc_net);
-+#else
-+	remove_proc_entry(RTL8180_MODULE_NAME, init_net.proc_net); 
-+#endif
- }
- 
- 
-@@ -3265,7 +3273,11 @@
- 		else 
- 			DMESG ("104-bit WEP is NOT supported in hardware");
- 	}
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))	
- 	if(request_irq(dev->irq, rtl8180_interrupt, SA_SHIRQ, dev->name, dev)){
-+#else
-+	if(request_irq(dev->irq, rtl8180_interrupt, IRQF_SHARED, dev->name, dev)){
-+#endif
- 		DMESGE("Error allocating IRQ %d",dev->irq);
- 		return -1;
- 	}else{ 
-@@ -3949,9 +3961,10 @@
- 		return -ENOMEM;
- 	priv = ieee80211_priv(dev);
- 	priv->ieee80211 = netdev_priv(dev);
--	
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))	
- 	SET_MODULE_OWNER(dev);
--	
-+#endif	
- 	pci_set_drvdata(pdev, dev);
- 	SET_NETDEV_DEV(dev, &pdev->dev);
- 	
diff --git a/network/rtl-wifi/rtl-wifi.SlackBuild b/network/rtl-wifi/rtl-wifi.SlackBuild
deleted file mode 100644
index 67cbdf47c48a..000000000000
--- a/network/rtl-wifi/rtl-wifi.SlackBuild
+++ /dev/null
@@ -1,89 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for rtl-wifi
-
-# Copyright 2008 Christophe Nguyen <cnguyenminhtan@free.fr>
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Modified by Robby Workman <rworkman@slackbuilds.org> to support
-# building modules for something other than the running kernel.
-
-PRGNAM=rtl-wifi
-VERSION=20080622
-ARCH=${ARCH:-i486}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-KERNEL=${KERNEL:-$(uname -r)}
-PKG_VERSION=${VERSION}_$(echo $KERNEL | tr - _)
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM
-tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2
-cd $PRGNAM-$VERSION
-chown -R root:root .
-chmod -R a-s,u+w,go+r-w .
-
-# Apply patch to make it compile with kernel 2.6.24
-patch -p1 < $CWD/patch_2_6_24.diff || exit 1
-
-make KVER=$KERNEL
-
-install -D -m 0644 $TMP/$PRGNAM-$VERSION/ieee80211/ieee80211_crypt-rtl.ko \
-  $PKG/lib/modules/$KERNEL/kernel/net/ieee80211/ieee80211_crypt-rtl.ko
-install -D -m 0644 $TMP/$PRGNAM-$VERSION/ieee80211/ieee80211_crypt_wep-rtl.ko \
-  $PKG/lib/modules/$KERNEL/kernel/net/ieee80211/ieee80211_crypt_wep-rtl.ko
-install -D -m 0644 $TMP/$PRGNAM-$VERSION/ieee80211/ieee80211_crypt_tkip-rtl.ko \
-  $PKG/lib/modules/$KERNEL/kernel/net/ieee80211/ieee80211_crypt_tkip-rtl.ko
-install -D -m 0644 $TMP/$PRGNAM-$VERSION/ieee80211/ieee80211_crypt_ccmp-rtl.ko \
-  $PKG/lib/modules/$KERNEL/kernel/net/ieee80211/ieee80211_crypt_ccmp-rtl.ko
-install -D -m 0644 $TMP/$PRGNAM-$VERSION/ieee80211/ieee80211-rtl.ko \
-  $PKG/lib/modules/$KERNEL/kernel/net/ieee80211/ieee80211-rtl.ko
-install -D -m 0644 $TMP/$PRGNAM-$VERSION/rtl818x-newstack/r8180.ko \
-  $PKG/lib/modules/$KERNEL/kernel/drivers/net/wireless/r8180.ko
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/{ieee80211,rtl{8187,818x}-newstack}
-cp -a ChangeLog $PKG/usr/doc/$PRGNAM-$VERSION/
-cp -a ieee80211/{LICENSE,README} $PKG/usr/doc/$PRGNAM-$VERSION/ieee80211
-for i in AUTHORS CHANGES COPYING INSTALL LICENSE \
- README README.adhoc README.master ; do
-  cp -a rtl818x-newstack/$i $PKG/usr/doc/$PRGNAM-$VERSION/rtl818x-newstack ;
-done
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-find $PKG/usr/doc -type f -exec chmod 0644 {} \;
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$PKG_VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/network/rtl-wifi/rtl-wifi.info b/network/rtl-wifi/rtl-wifi.info
deleted file mode 100644
index 6c8a8dc9b65a..000000000000
--- a/network/rtl-wifi/rtl-wifi.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM="rtl-wifi"
-VERSION="20080622"
-HOMEPAGE="http://rtl-wifi.sourceforge.net"
-DOWNLOAD="http://slackbuilds.org/sources/12.1/rtl-wifi-20080622.tar.bz2"
-MD5SUM="636b8d13ba4db7d7596725f354f88db4"
-MAINTAINER="Christophe Nguyen"
-EMAIL="cnguyenminhtan@free.fr"
-APPROVED="rworkman"
diff --git a/network/rtl-wifi/slack-desc b/network/rtl-wifi/slack-desc
deleted file mode 100644
index 9e37fef6351f..000000000000
--- a/network/rtl-wifi/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-rtl-wifi: rtl-wifi (rtl-wifi driver release modified for kernel 2.6.24)
-rtl-wifi: 
-rtl-wifi: Driver for Realtek wireless network adapters using the 
-rtl-wifi: rtl8180 chipsets.
-rtl-wifi: 
-rtl-wifi: For more information, visit the project's home page at:
-rtl-wifi: 
-rtl-wifi: http://rtl-wifi.sourceforge.net/wiki/Main_Page
-rtl-wifi: 
-rtl-wifi:
-rtl-wifi: