network/openvswitch: Removed (build failure)

The code in upstream's git repo might build, but it's not
even in a beta status yet, so it will have to wait (but of
course the SBo maintainer is free to begin testing already)

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

9 files changed, 0 insertions, 525 deletions

diff --git a/network/openvswitch/README b/network/openvswitch/README
deleted file mode 100644
index f8f2d09e4134f..0000000000000
--- a/network/openvswitch/README
+++ /dev/null
@@ -1,19 +0,0 @@
-Open vSwitch is a production quality, multilayer virtual switch licensed
-under the open source Apache 2.0 license.  It is designed to enable
-massive network automation through programmatic extension, while still
-supporting standard management interfaces (e.g. NetFlow, sFlow, RSPAN,
-ERSPAN,  CLI).  In addition, it is designed to support distribution
-across multiple physical servers similar to VMware.s vNetwork distributed
-vswitch or Cisco.s Nexus 1000V.
-
-Open vSwitch can operate both as a soft switch running within the
-hypervisor, and as the control stack for switching silicon. It has been
-ported to multiple virtualization platforms and switching chipsets. It
-is the default switch in the Xen Cloud Platform and also supports Xen,
-XenServer, KVM, and VirtualBox. The bulk of the code is written in
-platform-independent C and is easily ported to other environments.
-
-This package will build kernel modules that will be uses as replacements
-for the bridge modules included with the stock Linux kernel.  Open
-vSwitch includes a kernel module if you wish to use the standard Linux
-bridge utils to manage it.
diff --git a/network/openvswitch/doinst.sh b/network/openvswitch/doinst.sh
deleted file mode 100644
index 5f98269554a2e..0000000000000
--- a/network/openvswitch/doinst.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD|md5sum)" = "$(cat $NEW|md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-preserve_perms() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  if [ -e $OLD ]; then
-    cp -a $OLD ${NEW}.incoming
-    cat $NEW > ${NEW}.incoming
-    mv ${NEW}.incoming $NEW
-  fi
-  config $NEW
-}
-
-preserve_perms etc/rc.d/rc.openvswitch.new
-
-depmod -A
diff --git a/network/openvswitch/openvswitch.SlackBuild b/network/openvswitch/openvswitch.SlackBuild
deleted file mode 100644
index 4ab9e9a1a80ce..0000000000000
--- a/network/openvswitch/openvswitch.SlackBuild
+++ /dev/null
@@ -1,133 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for openvswitch
-
-# Copyright 2008-2010 Christopher Walker
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=openvswitch
-VERSION=1.0.1
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-MODULEPATH=${MODULEPATH:-/lib/modules/`uname -r`}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-if [ ! -d $MODULEPATH ]; then
-  echo "Missing module path $MODULEPATH!  Exiting script..."
-  exit
-fi
-
-if [ ! -h $MODULEPATH/build ]; then
-  echo "Missing source patch $MODULEPATH/build!  Exiting script..."
-  exit
-fi
-
-KERNELPATH=$(readlink /lib/modules/`uname -r`/build)
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-chmod -R u+w,go+r-w,a-s .
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/$PRGNAM-$VERSION \
-  --with-l26=$KERNELPATH \
-  --enable-ndebug \
-  --enable-ssl
-
-make
-make DESTDIR=$TMP/package-$PRGNAM install
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/{schema,xen}
-install -m 644 COPYING ChangeLog CodingStyle INSTALL.KVM INSTALL.Linux \
-  INSTALL.OpenFlow INSTALL.SSL INSTALL.XenServer INSTALL.bridge \
-  INSTALL.userspace NOTICE README README-gcov REPORTING-BUGS \
-  SubmittingPatches \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-install -m 644 $CWD/xen/vif-openvswitch $CWD/xen/network-openvswitch \
-  $CWD/xen/README \
-  $PKG/usr/doc/$PRGNAM-$VERSION/xen
-install -m 644 vswitchd/vswitch.ovsschema \
-  $PKG/usr/doc/$PRGNAM-$VERSION/schema
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG$MODULEPATH/kernel/extra/openvswitch
-install -m 644 datapath/linux-2.6/openvswitch_mod.ko \
-  $PKG$MODULEPATH/kernel/extra/openvswitch
-install -m 644 datapath/linux-2.6/brcompat_mod.ko \
-  $PKG$MODULEPATH/kernel/extra/openvswitch
-
-mkdir -p $PKG/etc/openvswitch
-
-mkdir -p $PKG/etc/rc.d
-sed -e "s/@DOCDIR@/\/usr\/doc\/$PRGNAM-$VERSION\/schema/" $CWD/rc.openvswitch > $PKG/etc/rc.d/rc.openvswitch.new
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-mkdir -p $PKG/var/run/openvswitch
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/openvswitch/openvswitch.info b/network/openvswitch/openvswitch.info
deleted file mode 100644
index 5fdbffbc4788f..0000000000000
--- a/network/openvswitch/openvswitch.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="openvswitch"
-VERSION="1.0.1"
-HOMEPAGE="http://openvswitch.org"
-DOWNLOAD="http://openvswitch.org/releases/openvswitch-1.0.1.tar.gz"
-MD5SUM="70930c604e64cc9a6658fa504416556c"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-MAINTAINER="Christopher Walker"
-EMAIL="kris240376@gmail.com"
-APPROVED="Niels Horn"
diff --git a/network/openvswitch/rc.openvswitch b/network/openvswitch/rc.openvswitch
deleted file mode 100644
index a9244f9dfb076..0000000000000
--- a/network/openvswitch/rc.openvswitch
+++ /dev/null
@@ -1,68 +0,0 @@
-#!/bin/sh
-# Start/stop/restart openvswitch.
-
-# To start Open vSwitch automatically at boot, be sure this script is
-# executable:
-#
-#   % chmod 755 /etc/rc.d/rc.openvswitch
-
-# Before you can run Open vSwitch daemon, you must have a database.  To
-# install an initial database, perform the following as root:
-#
-#   % modprobe openvswitch_mod
-#   % ovsdb-tool create /etc/openvswitch/ovs-vswitchd.conf.db /usr/doc/openvswitch-1.0.1/schema/vswitch.ovsschema
-#
-
-# Module to make Open vSwitch compatible with Linux bridge utils:
-BRCOMPAT=0
-
-SOCKET=/var/run/openvswitch/db.sock
-VSPID=/var/run/openvswitch/ovs-vswitchd.pid
-DBPID=/var/run/openvswitch/ovsdb-server.pid
-
-# Insert kernel driver for Open vSwitch:
-/sbin/modprobe openvswitch_mod
-
-# Insert kernel driver for VLANs:
-/sbin/modprobe 8021q
-
-# Insert kernel driver for bridge util compatibility:
-if [ $BRCOMPAT -ne 0 ] ; then
-  /sbin/modprobe brcompat_mod
-fi
-
-# Start openvswitch:
-openvswitch_start() {
-  echo "Starting openvswitch:  /etc/rc.d/rc.openvswitch"
-  /usr/sbin/ovsdb-server /etc/openvswitch/ovs-vswitchd.conf.db --remote=punix:$SOCKET --detach --pidfile=$DBPID
-  /usr/bin/ovs-vsctl --no-wait init
-  /usr/sbin/ovs-vswitchd unix:$SOCKET --detach --pidfile=$VSPID
-}
-
-# Stop openvswitch:
-openvswitch_stop() {
-  echo "Stopping openvswitch:  /etc/rc.d/rc.openvswitch"
-  if [ -e $VSPID ]; then
-    pid=$(cat $VSPID)
-    /usr/bin/ovs-appctl -t /var/run/openvswitch/ovs-vswitchd.$pid.ctl exit
-  fi
-  if [ -e $DBPID ]; then
-    pid=$(cat $DBPID)
-    /usr/bin/ovs-appctl -t /var/run/openvswitch/ovsdb-server.$pid.ctl exit
-  fi
-}
-
-case "$1" in
-'start')
-  openvswitch_start
-  ;;
-'stop')
-  openvswitch_stop
-  ;;
-'restart')
-  openvswitch_stop
-  openvswitch_start
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
diff --git a/network/openvswitch/slack-desc b/network/openvswitch/slack-desc
deleted file mode 100644
index d302c084c5d25..0000000000000
--- a/network/openvswitch/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-           |-----handy-ruler------------------------------------------------------|
-openvswitch: openvswitch (multilayer virtual switch)
-openvswitch:
-openvswitch: Open vSwitch is a production quality, multilayer virtual switch
-openvswitch: licensed under the open source Apache 2.0 license.  It is designed
-openvswitch: to enable massive network automation through programmatic extension,
-openvswitch: while still supporting standard management interface (e.g. NetFlow,
-openvswitch: sFlow, RSPAN, ERSPAN, CLI).
-openvswitch:
-openvswitch: Homepage: http://openvswitch.org/
-openvswitch:
-openvswitch:
diff --git a/network/openvswitch/xen/README b/network/openvswitch/xen/README
deleted file mode 100644
index 93889615e7f91..0000000000000
--- a/network/openvswitch/xen/README
+++ /dev/null
@@ -1,39 +0,0 @@
-Here are some scripts that I've written for use with Xen at my site.
-In order to use these scripts with your Xen installation you'll need to copy
-both the network-openvswitch and vif-openvswitch files to your
-/etc/xen/scripts directory.  You can instruct Xen to use these scripts by
-editing your /etc/xen/xend-config.sxp file and specifying these scripts as
-the default network-script and vif-script.
-
-For example, here are the entries in my xend-config.sxp file:
-
-  (network-script 'network-openvswitch netdev=eth2 bridge=ovs0')
-
-  (vif-script 'vif-openvswitch bridge=ovs0')
-
-If your network interface card and attached network switch support VLAN
-tagged traffic, you can place virtual machines within a seperate VLAN by
-appending a '.' and the VLAN tag number you wish the domain to use.  For
-example, to have all domains default to VLAN 2 you can do the following:
-
-  (vif-script 'vif-openvswitch bridge=ovs0.2')
-
-You can also specify tagged traffic in the domain configuration file.
-
-If you are hosting a hardware virtualized domain understand that the
-/etc/xen/scripts/qemu-ifup script is run instead of the vif-script specified
-in the xend-config.sxp file.  You'll need to edit this file to add the port
-to the vswitch instead of using the brctl (unless of course you are using
-the appropriate kernel module to control the vswitch using brctl.)  Here is
-a snippet from my qemu-ifup to handle hardware virtualized ports:
-
-  if lsmod | grep -c openvswitch_mod 1> /dev/null && ! lsmod | grep -c brcompat_mod 1> /dev/null
-  then
-      ovs-vsctl -- --may-exist add-port $bridge $1
-  else
-      brctl addif $bridge $1 || true
-  fi
-
-This doesn't handle tagged traffic.  I'll leave that as an exercise for you.
-
-Enjoy.
diff --git a/network/openvswitch/xen/network-openvswitch b/network/openvswitch/xen/network-openvswitch
deleted file mode 100644
index 45cda0b1954ee..0000000000000
--- a/network/openvswitch/xen/network-openvswitch
+++ /dev/null
@@ -1,124 +0,0 @@
-#!/bin/bash
-#============================================================================
-# Default Xen network start/stop script.
-# Xend calls a network script when it starts.
-# The script name to use is defined in ${XEN_CONFIG_DIR}/xend-config.sxp
-# in the network-script field.
-#
-# This script creates a virtual switch (default ${netdev}) and adds a
-# device (defaults to eth0) to it.  The interface that this Open vSwitch
-# is created on should not have a working IP address and will be used as
-# a switch for Xen domU's.
-#
-# Usage:
-# network-openvswitch (start|stop|status) {VAR=VAL}*
-#
-# Vars:
-# bridge     The bridge to use (default xenvs0).
-# netdev     The interface to add to the bridge (default eth0).  This
-#            device should not be configured with an IP address.  If so
-#            this script will tear down the interface and bring it back up
-#            without an IP address.
-#
-# start:
-# Creates the bridge as bridge
-# Enslaves netdev to bridge
-#
-# stop:
-# Removes netdev from the bridge
-# Deletes bridge
-#
-# status:
-# Print addresses, interfaces
-#
-#============================================================================
-
-dir=$(dirname "$0")
-. "$dir/logging.sh"
-. "$dir/xen-script-common.sh"
-. "$dir/xen-network-common.sh"
-. "$dir/locking.sh"
-
-findCommand "$@"
-evalVariables "$@"
-
-netdev=${netdev:-eth0}
-bridge=${bridge:-ovs0}
-
-addr=`ip addr show dev ${netdev} | egrep '^ *inet' | sed -e 's/ *inet //' -e 's/ .*//'`
-if [ -n "$addr" ]; then
-    echo "Invalid device: ${netdev} is up and has a valid IP address!" >&2
-    exit 1
-fi
-
-show_status () {
-    local dev=$1
-    local bridge=$2
-    
-    echo '============================================================'
-    echo 'vSwitch interfaces'
-    ovs-vsctl list-ifaces ${bridge}
-    echo ' '
-    echo 'vSwitch ports'
-    ovs-vsctl list-ports ${bridge}
-    echo '============================================================'
-}
-
-op_start () {
-    if [ "${bridge}" = "null" ] ; then
-	return
-    fi
-
-    ifconfig "${netdev}" down
-    ifconfig "${netdev}" 0.0.0.0 up
-    ovs-vsctl -- --may-exist add-br ${bridge}
-    ifconfig "${bridge}" 0.0.0.0 up
-    ovs-vsctl -- --may-exist add-port ${bridge} ${netdev}
-
-    # Remove any stale ports from last time virtual switch was running.
-    # Open vSwitch has the habit of remembering port settings between
-    # runs.
-    for port in $(ovs-vsctl list-ports ${bridge})
-    do
-	if [ "${port}" != "${netdev}" ]
-	then
-	    ifconfig "${port}" down
-	    ovs-vsctl del-port ${port}
-	fi
-    done
-}
-
-op_stop () {
-    if [ "${bridge}" = "null" ]; then
-	return
-    fi
-
-    # Remove all ports from virtual switch.
-    for port in $(ovs-vsctl list-ports ${bridge})
-    do
-	ifconfig "${port}" down
-	ovs-vsctl del-port ${port}
-    done
-
-    ifconfig "${bridge}" down
-    ovs-vsctl -- --if-exists del-br ${bridge}
-}
-
-case "$command" in
-    start)
-	op_start
-	;;
-    
-    stop)
-	op_stop
-	;;
-
-    status)
-	show_status ${netdev} ${bridge}
-	;;
-
-    *)
-	echo "Unknown command: $command" >&2
-	echo 'Valid commands are: start, stop, status' >&2
-	exit 1
-esac
diff --git a/network/openvswitch/xen/vif-openvswitch b/network/openvswitch/xen/vif-openvswitch
deleted file mode 100644
index bdcd7c46f7228..0000000000000
--- a/network/openvswitch/xen/vif-openvswitch
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/bin/bash
-#============================================================================
-# ${XEN_SCRIPT_DIR}/vif-openvswitch
-#
-# Script for configuring a vif using Open vSwitch.
-#
-# Usage:
-# vif-openvswitch (add|remove|online|offline)
-#
-# Environment vars:
-# vif         vif interface name (required).
-# XENBUS_PATH path to this device's details in the XenStore (required).
-#
-# Read from the store:
-# bridge  bridge to add the vif to (optional).  Defaults to searching for the
-#         bridge itself.
-#
-# up:
-# Enslaves the vif interface to the bridge.
-#
-# down:
-# Removes the vif interface from the bridge.
-#============================================================================
-
-dir=$(dirname "$0")
-. "$dir/vif-common.sh"
-
-bridge=${bridge:-}
-bridge=$(xenstore_read_default "$XENBUS_PATH/bridge" "$bridge")
-
-if [ -z "${bridge}" ]
-then
-    bridge=$(ovs-vsctl listbr | cut -d "
-" -f 1)
-
-    if [ -z "${bridge}" ]
-    then
-	fatal "Could not find bridge and none was specified"
-    fi
-fi
-
-tag=${tag:-}
-
-# Domain on VLAN tagged bridge?
-RET=0
-ovs-vsctl list-br | grep -c ${bridge} 1>/dev/null 2>&1 || RET=1
-if [ $RET -eq 1 ]
-then
-    if [[ $bridge =~ \.[[:digit:]]{1,4}$ ]]
-    then
-	tag=$(echo ${bridge} | cut -d "." -f 2)
-	bridge=$(echo ${bridge} | cut -d "." -f 1)
-    else
-	fatal "Could not find bridge device ${bridge}"
-    fi
-fi
-
-RET=0
-ovs-vsctl list-br | grep -c ${bridge} 1>/dev/null 2>&1 || RET=1
-if [ $RET -eq 1 ]
-then
-    fatal "Could not find bridge device ${bridge}"
-fi
-
-log debug "Successful vif-bridge $command for ${vif}, bridge ${bridge}."
-case "$command" in
-    online)
-	ifconfig "${vif}" 0.0.0.0 up
-	if [ -z $tag ]
-	then
-            ovs-vsctl -- --may-exist add-port ${bridge} ${vif}
-	else
-	    ovs-vsctl -- --may-exist add-port ${bridge} ${vif} tag=${tag}
-	fi
-        ;;
-
-    offline)
-	ovs-vsctl -- --if-exists del-port ${bridge} ${vif}
-	ifconfig "$vif" 0.0.0.0 down
-        ;;
-esac
-
-if [ "$command" == "online" ]
-then
-  success
-fi