system/kvm-kmod: Removed (the stock modules are fine)

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

5 files changed, 0 insertions, 164 deletions

diff --git a/system/kvm-kmod/README b/system/kvm-kmod/README
deleted file mode 100644
index 5a0aaf1f98017..0000000000000
--- a/system/kvm-kmod/README
+++ /dev/null
@@ -1,18 +0,0 @@
-kvm (Kernel-based Virtual Machine) is a full virtualization solution
-for Linux on x86 hardware containing virtualization extensions
-(Intel VT or AMD-V).  kvm is divided into the kvm-kmod package
-(kernel modules) and the qemu package which are both available as 
-separate Slackbuilds.
-
-kvm-kmod consists of a kernel module, 'kvm.ko', that provides the
-core virtualization infrastructure and a processor specific module,
-'kvm-intel.ko' or 'kvm-amd.ko'.  Slackware provides these modules
-in the 'a/kernel-modules*' packages.  In most cases, the provided 
-versions are sufficient to run qemu with kvm support.  This kvm-kmod
-package is only needed if you want to change the kvm modules to a 
-different version.
-
-kvm-kmod updates the modules without overwriting the ones provided
-by Slackware.  If you uninstall kvm-kmod, you will need to run 
-'depmod -a' to regenerate the modules.dep and map files to regain 
-access to the Slackware provided versions.
diff --git a/system/kvm-kmod/doinst.sh b/system/kvm-kmod/doinst.sh
deleted file mode 100644
index 6510094161e06..0000000000000
--- a/system/kvm-kmod/doinst.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-# Re-generate modules.dep and map files.
-if [ -x sbin/depmod ]; then
-  chroot . /sbin/depmod -a @KERNEL@ 1> /dev/null 2> /dev/null
-fi
diff --git a/system/kvm-kmod/kvm-kmod.SlackBuild b/system/kvm-kmod/kvm-kmod.SlackBuild
deleted file mode 100644
index ca5d1fac9d280..0000000000000
--- a/system/kvm-kmod/kvm-kmod.SlackBuild
+++ /dev/null
@@ -1,113 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for kvm-kmod
-
-# Written by Stu Miller <slackbuilds@go4it2day.com>
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=kvm-kmod
-VERSION=${VERSION:-3.9}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-KERNEL=${KERNEL:-$(uname -r)}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --arch=$ARCH
-
-make \
-  PREFIX=/usr \
-  PKGCONFIGDIR=/usr/lib${LIBDIRSUFFIX}/pkgconfig \
-  KERNELDIR=/lib/modules/$KERNEL/source \
-  docdir=/usr/doc/$PRGNAM-$VERSION
-make install \
-  PREFIX=/usr \
-  PKGCONFIGDIR=/usr/lib${LIBDIRSUFFIX}/pkgconfig \
-  KERNELDIR=/lib/modules/$KERNEL/source \
-  docdir=/usr/doc/$PRGNAM-$VERSION \
-  DESTDIR=$PKG
-
-# Remove /etc/udev - this part is shipped with the qemu package
-rm -rf $PKG/etc/udev
-
-# Make modprobe prefer the new modules in /lib/modules/$KERNEL/updates/
-# We don't want to install this with a .new suffix, because we want it
-# removed with the package.
-mkdir -p $PKG/etc/depmod.d
-cat << EOF > $PKG/etc/depmod.d/kvm-$KERNEL.conf
-override kvm $KERNEL updates
-override kvm-amd $KERNEL updates
-override kvm-intel $KERNEL updates
-EOF
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-sed "s%@KERNEL@%$KERNEL%" $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/kvm-kmod/kvm-kmod.info b/system/kvm-kmod/kvm-kmod.info
deleted file mode 100644
index a6b40d94a3594..0000000000000
--- a/system/kvm-kmod/kvm-kmod.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="kvm-kmod"
-VERSION="3.9"
-HOMEPAGE="http://www.linux-kvm.org/page/Main_Page"
-DOWNLOAD="http://downloads.sourceforge.net/kvm/kvm-kmod-3.9.tar.bz2"
-MD5SUM="afbfe93db1a6ee976594660aeb0465f1"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES=""
-MAINTAINER="Stu Miller"
-EMAIL="slackbuilds@go4it2day.com"
diff --git a/system/kvm-kmod/slack-desc b/system/kvm-kmod/slack-desc
deleted file mode 100644
index c6d2c3def6d08..0000000000000
--- a/system/kvm-kmod/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in. You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-        |-----handy-ruler------------------------------------------------------|
-kvm-kmod: kvm-kmod (kvm kernel modules only)
-kvm-kmod:
-kvm-kmod: kvm (Kernel-based Virtual Machine) is a full virtualization solution
-kvm-kmod: for Linux on x86 hardware containing virtualization extensions
-kvm-kmod: (Intel VT or AMD-V).
-kvm-kmod:
-kvm-kmod: kvm is divided into the kvm-kmod package (kernel modules) and the
-kvm-kmod: qemu package which are both available as separate Slackbuilds.
-kvm-kmod:
-kvm-kmod:
-kvm-kmod: