development/nexus: Added (Maven repository manager)

Signed-off-by: Niels Horn <niels.horn@slackbuilds.org>

8 files changed, 965 insertions, 0 deletions

diff --git a/development/nexus/README b/development/nexus/README
new file mode 100644
index 000000000000..fedf5bd17bce
--- /dev/null
+++ b/development/nexus/README
@@ -0,0 +1,10 @@
+Nexus manages software artifacts required for development, deployment, and 
+provisioning. If you develop software, Nexus can help you share those
+artifacts with other developers and end-users.
+
+Nexus requires a "nexus" user and group; create these before running the
+SlackBuild script. Examples:
+
+# groupadd -g 252 nexus
+# useradd -u 252 -s /bin/sh -d /dev/null -g nexus nexus
+
diff --git a/development/nexus/doinst.sh b/development/nexus/doinst.sh
new file mode 100644
index 000000000000..2b7b1560a006
--- /dev/null
+++ b/development/nexus/doinst.sh
@@ -0,0 +1,27 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms  etc/rc.d/rc.nexus.new
+config etc/nexus/plexus.properties.new
+config etc/nexus/wrapper.conf.new
diff --git a/development/nexus/nexus.SlackBuild b/development/nexus/nexus.SlackBuild
new file mode 100644
index 000000000000..8ace4750d375
--- /dev/null
+++ b/development/nexus/nexus.SlackBuild
@@ -0,0 +1,123 @@
+#!/bin/sh
+
+# Copyright 2008-2011  Giorgio Peron Campodarsego Italy
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=nexus
+VERSION=${VERSION:-1.9.2}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  NEXUS_ARCH="linux-x86-32"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  NEXUS_ARCH="linux-x86-32"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  NEXUS_ARCH="linux-x86-64"
+  LIBDIRSUFFIX="64"
+else
+  echo "ARCH $ARCH not supported"
+  exit 1
+fi
+
+set -e 
+
+# Check if the 'nexus' user & group exist:
+if [ "$(grep ^nexus /etc/passwd)" = "" -o "$(grep ^nexus /etc/group)" = "" ] ; then
+  printf "\nYou must have a nexus user and group.\n\nExample:\n"
+  printf "\t# groupadd -g 252 nexus\n"
+  printf "\t# useradd -u 252 -d /dev/null -s /bin/sh -g nexus nexus\n\n"
+  exit 1
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-oss-webapp-$VERSION
+tar xvf $CWD/$PRGNAM-oss-webapp-$VERSION-bundle.tar.gz
+cd $PRGNAM-oss-webapp-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+DIR=$PKG/usr/lib$LIBDIRSUFFIX/$PRGNAM
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $PKG/var/{lib,log,run}/$PRGNAM
+mkdir -p $PKG/etc/rc.d
+mkdir -p $PKG/etc/$PRGNAM
+
+cp -r bin/jsw/conf/* $PKG/etc/nexus/
+mkdir -p $DIR/bin/jsw/lib
+cp -r bin/jsw/lib $DIR/bin/jsw
+cp -r bin/jsw/license $PKG/usr/doc/$PRGNAM-$VERSION
+mkdir -p $DIR/bin/jsw/$NEXUS_ARCH
+cp -r bin/jsw/$NEXUS_ARCH $DIR/bin/jsw
+cp -r runtime $DIR
+cp -r conf/* $PKG/etc/nexus/
+mkdir -p $PKG/var/tmp/$PRGNAM
+cp *.txt $PKG/usr/doc/$PRGNAM-$VERSION
+
+#Put startup script in place and set correct location
+cat $CWD/rc.$PRGNAM | \
+  sed -e "s/@NEXUS_ARCH@/$NEXUS_ARCH/g" \
+      -e "s/@LIBDIRSUFFIX@/$LIBDIRSUFFIX/g" \
+  > $PKG/etc/rc.d/rc.$PRGNAM.new
+
+#Create links to configurarion files
+cd $DIR
+  ln -sf ../../../etc/nexus conf
+cd -
+cd $DIR/bin/jsw
+  ln -sf ../../../../../etc/nexus conf
+cd -
+
+#Replace two configuration files
+rm $PKG/etc/nexus/plexus.properties
+cat $CWD/plexus.properties > $PKG/etc/nexus/plexus.properties.new
+rm $PKG/etc/nexus/wrapper.conf
+cat $CWD/wrapper.conf > $PKG/etc/nexus/wrapper.conf.new
+
+#Fix ownership of some dirs
+chown -R nexus:nexus $PKG/var/{lib,log,run,tmp}/nexus
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/development/nexus/nexus.info b/development/nexus/nexus.info
new file mode 100644
index 000000000000..5816c5fce79d
--- /dev/null
+++ b/development/nexus/nexus.info
@@ -0,0 +1,10 @@
+PRGNAM="nexus"
+VERSION="1.9.2"
+HOMEPAGE="http://nexus.sonatype.org"
+DOWNLOAD="http://nexus.sonatype.org/downloads/nexus-oss-webapp-1.9.2-bundle.tar.gz"
+MD5SUM="adfe4d0fb4f177a78bce6494d4d5d627"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Giorgio Peron"
+EMAIL="giorgio.peron@gmail.com"
+APPROVED="Niels Horn"
diff --git a/development/nexus/plexus.properties b/development/nexus/plexus.properties
new file mode 100644
index 000000000000..b4efc21d37f9
--- /dev/null
+++ b/development/nexus/plexus.properties
@@ -0,0 +1,23 @@
+application-port=8081
+application-host=0.0.0.0
+runtime=${basedir}/runtime
+apps=${runtime}/apps
+#nexus-work=${basedir}/../sonatype-work/nexus
+nexus-work=/var/lib/nexus
+nexus-app=${runtime}/apps/nexus
+webapp=${runtime}/apps/nexus/webapp
+webapp-context-path=/nexus
+security-xml-file=${nexus-work}/conf/security.xml
+application-conf=${nexus-work}/conf
+#runtime-tmp=${runtime}/tmp
+runtime-tmp=/var/tmp/nexus
+
+# If this file is present, it will be used to configure Jetty.
+jetty.xml=${basedir}/conf/jetty.xml
+
+# Uncomment this to use the debug js files
+#index.template.file=templates/index-debug.vm
+
+
+
+
diff --git a/development/nexus/rc.nexus b/development/nexus/rc.nexus
new file mode 100644
index 000000000000..776017e9be1b
--- /dev/null
+++ b/development/nexus/rc.nexus
@@ -0,0 +1,571 @@
+#! /bin/sh
+
+#
+# Copyright (c) 1999, 2006 Tanuki Software Inc.
+#
+# Java Service Wrapper sh script.  Suitable for starting and stopping
+#  wrapped Java applications on UNIX platforms.
+#
+
+# Copyright 2011  Giorgio Peron Campodarsego, PD, Italy giorgio.peron@gmail.com
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+APP_NAME="nexus"
+APP_LONG_NAME="Nexus OSS"
+
+WRAPPER_CMD="/usr/lib@LIBDIRSUFFIX@/nexus/bin/jsw/@NEXUS_ARCH@/wrapper"
+WRAPPER_CONF="/usr/lib@LIBDIRSUFFIX@/nexus/bin/jsw/conf/wrapper.conf"
+
+# Priority at which to run the wrapper.  See "man nice" for valid priorities.
+#  nice is only used if a priority is specified.
+PRIORITY=
+
+# Location of the pid file.
+PIDDIR="/var/run/nexus"
+
+# If uncommented, causes the Wrapper to be shutdown using an anchor file.
+#  When launched with the 'start' command, it will also ignore all INT and
+#  TERM signals.
+#IGNORE_SIGNALS=true
+
+# If specified, the Wrapper will be run as the specified user.
+# IMPORTANT - Make sure that the user has the required privileges to write
+#  the PID file and wrapper.log files.  Failure to be able to write the log
+#  file will cause the Wrapper to exit without any way to write out an error
+#  message.
+# NOTE - This will set the user which is used to run the Wrapper as well as
+#  the JVM and is not useful in situations where a privileged resource or
+#  port needs to be allocated prior to the user being changed.
+RUN_AS_USER=nexus
+
+# The following two lines are used by the chkconfig command. Change as is
+#  appropriate for your application.  They should remain commented.
+# chkconfig: 2345 20 80
+# description: Test Wrapper Sample Application
+
+# Do not modify anything beyond this point
+#-----------------------------------------------------------------------------
+
+# Get the fully qualified path to the script
+case $0 in
+    /*)
+        SCRIPT="$0"
+        ;;
+    *)
+        PWD=`pwd`
+        SCRIPT="$PWD/$0"
+        ;;
+esac
+
+# Resolve the true real path without any sym links.
+CHANGED=true
+while [ "X$CHANGED" != "X" ]
+do
+    # Change spaces to ":" so the tokens can be parsed.
+    SAFESCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'`
+    # Get the real path to this script, resolving any symbolic links
+    TOKENS=`echo $SAFESCRIPT | sed -e 's;/; ;g'`
+    REALPATH=
+    for C in $TOKENS; do
+        # Change any ":" in the token back to a space.
+        C=`echo $C | sed -e 's;:; ;g'`
+        REALPATH="$REALPATH/$C"
+        # If REALPATH is a sym link, resolve it.  Loop for nested links.
+        while [ -h "$REALPATH" ] ; do
+            LS="`ls -ld "$REALPATH"`"
+            LINK="`expr "$LS" : '.*-> \(.*\)$'`"
+            if expr "$LINK" : '/.*' > /dev/null; then
+                # LINK is absolute.
+                REALPATH="$LINK"
+            else
+                # LINK is relative.
+                REALPATH="`dirname "$REALPATH"`""/$LINK"
+            fi
+        done
+    done
+
+    if [ "$REALPATH" = "$SCRIPT" ]
+    then
+        CHANGED=""
+    else
+        SCRIPT="$REALPATH"
+    fi
+done
+
+# Change the current directory to the location of the script
+cd "`dirname "$REALPATH"`"
+REALDIR=`pwd`
+
+# If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if
+#  the working directory is later changed.
+FIRST_CHAR=`echo $PIDDIR | cut -c1,1`
+if [ "$FIRST_CHAR" != "/" ]
+then
+    PIDDIR=$REALDIR/$PIDDIR
+fi
+# Same test for WRAPPER_CMD
+FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1`
+if [ "$FIRST_CHAR" != "/" ]
+then
+    WRAPPER_CMD=$REALDIR/$WRAPPER_CMD
+fi
+# Same test for WRAPPER_CONF
+FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1`
+if [ "$FIRST_CHAR" != "/" ]
+then
+    WRAPPER_CONF=$REALDIR/$WRAPPER_CONF
+fi
+
+# Process ID
+ANCHORFILE="$PIDDIR/$APP_NAME.anchor"
+PIDFILE="$PIDDIR/$APP_NAME.pid"
+LOCKDIR="/var/lock/subsys"
+LOCKFILE="$LOCKDIR/$APP_NAME"
+pid=""
+
+# Resolve the location of the 'ps' command
+PSEXE="/usr/bin/ps"
+if [ ! -x "$PSEXE" ]
+then
+    PSEXE="/bin/ps"
+    if [ ! -x "$PSEXE" ]
+    then
+        echo "Unable to locate 'ps'."
+        echo "Please report this message along with the location of the command on your system."
+        exit 1
+    fi
+fi
+
+# Resolve the os
+DIST_OS=`uname -s | tr [:upper:] [:lower:] | tr -d [:blank:]`
+case "$DIST_OS" in
+    'sunos')
+        DIST_OS="solaris"
+        ;;
+    'hp-ux' | 'hp-ux64')
+        DIST_OS="hpux"
+        ;;
+    'darwin')
+        DIST_OS="macosx"
+        ;;
+    'unix_sv')
+        DIST_OS="unixware"
+        ;;
+esac
+
+# Resolve the architecture
+DIST_ARCH=`uname -p | tr [:upper:] [:lower:] | tr -d [:blank:]`
+if [ "$DIST_ARCH" = "unknown" ]
+then
+    DIST_ARCH=`uname -m | tr [:upper:] [:lower:] | tr -d [:blank:]`
+fi
+case "$DIST_ARCH" in
+    'amd64' | 'athlon' | 'ia32' | 'ia64' | 'i386' | 'i486' | 'i586' | 'i686' | 'x86_64')
+        DIST_ARCH="x86"
+        ;;
+    'ip27')
+        DIST_ARCH="mips"
+        ;;
+    'power' | 'powerpc' | 'power_pc' | 'ppc64')
+        DIST_ARCH="ppc"
+        ;;
+    'pa_risc' | 'pa-risc')
+        DIST_ARCH="parisc"
+        ;;
+    'sun4u' | 'sparcv9')
+        DIST_ARCH="sparc"
+        ;;
+    '9000/800')
+        DIST_ARCH="parisc"
+        ;;
+esac
+
+outputFile() {
+    if [ -f "$1" ]
+    then
+        echo "  $1 (Found but not executable.)";
+    else
+        echo "  $1"
+    fi
+}
+
+# Decide on the wrapper binary to use.
+# If a 32-bit wrapper binary exists then it will work on 32 or 64 bit
+#  platforms, if the 64-bit binary exists then the distribution most
+#  likely wants to use long names.  Otherwise, look for the default.
+# For macosx, we also want to look for universal binaries.
+WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
+if [ -x "$WRAPPER_TEST_CMD" ]
+then
+    WRAPPER_CMD="$WRAPPER_TEST_CMD"
+else
+    if [ "$DIST_OS" = "macosx" ]
+    then
+        WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-32"
+        if [ -x "$WRAPPER_TEST_CMD" ]
+        then
+            WRAPPER_CMD="$WRAPPER_TEST_CMD"
+        else
+            WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
+            if [ -x "$WRAPPER_TEST_CMD" ]
+            then
+                WRAPPER_CMD="$WRAPPER_TEST_CMD"
+            else
+                WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-64"
+                if [ -x "$WRAPPER_TEST_CMD" ]
+                then
+                    WRAPPER_CMD="$WRAPPER_TEST_CMD"
+                else
+                    if [ ! -x "$WRAPPER_CMD" ]
+                    then
+                        echo "Unable to locate any of the following binaries:"
+                        outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
+                        outputFile "$WRAPPER_CMD-$DIST_OS-universal-32"
+                        outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
+                        outputFile "$WRAPPER_CMD-$DIST_OS-universal-64"
+                        outputFile "$WRAPPER_CMD"
+                        exit 1
+                    fi
+                fi
+            fi
+        fi
+    else
+        WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
+        if [ -x "$WRAPPER_TEST_CMD" ]
+        then
+            WRAPPER_CMD="$WRAPPER_TEST_CMD"
+        else
+            if [ ! -x "$WRAPPER_CMD" ]
+            then
+                echo "Unable to locate any of the following binaries:"
+                outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
+                outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
+                outputFile "$WRAPPER_CMD"
+                exit 1
+            fi
+        fi
+    fi
+fi
+
+# Build the nice clause
+if [ "X$PRIORITY" = "X" ]
+then
+    CMDNICE=""
+else
+    CMDNICE="nice -$PRIORITY"
+fi
+
+# Build the anchor file clause.
+if [ "X$IGNORE_SIGNALS" = "X" ]
+then
+   ANCHORPROP=
+   IGNOREPROP=
+else
+   ANCHORPROP=wrapper.anchorfile=\"$ANCHORFILE\"
+   IGNOREPROP=wrapper.ignore_signals=TRUE
+fi
+
+# Build the lock file clause.  Only create a lock file if the lock directory exists on this platform.
+LOCKPROP=
+if [ -d $LOCKDIR ]
+then
+    if [ -w $LOCKDIR ]
+    then
+        LOCKPROP=wrapper.lockfile=\"$LOCKFILE\"
+    fi
+fi
+
+checkUser() {
+    # $1 touchLock flag
+    # $2 command
+
+    # Check the configured user.  If necessary rerun this script as the desired user.
+    if [ "X$RUN_AS_USER" != "X" ]
+    then
+        # Resolve the location of the 'id' command
+        IDEXE="/usr/xpg4/bin/id"
+        if [ ! -x "$IDEXE" ]
+        then
+            IDEXE="/usr/bin/id"
+            if [ ! -x "$IDEXE" ]
+            then
+                echo "Unable to locate 'id'."
+                echo "Please report this message along with the location of the command on your system."
+                exit 1
+            fi
+        fi
+    
+        if [ "`$IDEXE -u -n`" = "$RUN_AS_USER" ]
+        then
+            # Already running as the configured user.  Avoid password prompts by not calling su.
+            RUN_AS_USER=""
+        fi
+    fi
+    if [ "X$RUN_AS_USER" != "X" ]
+    then
+        # If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be
+        # able to create the lock file.  The Wrapper will be able to update this file once it
+        # is created but will not be able to delete it on shutdown.  If $2 is defined then
+        # the lock file should be created for the current command
+        if [ "X$LOCKPROP" != "X" ]
+        then
+            if [ "X$1" != "X" ]
+            then
+                # Resolve the primary group 
+                RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1`
+                if [ "X$RUN_AS_GROUP" = "X" ]
+                then
+                    RUN_AS_GROUP=$RUN_AS_USER
+                fi
+                touch $LOCKFILE
+                chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE
+            fi
+        fi
+
+        # Still want to change users, recurse.  This means that the user will only be
+        #  prompted for a password once. Variables shifted by 1
+        su -m $RUN_AS_USER -c "\"$REALPATH\" $2"
+
+        # Now that we are the original user again, we may need to clean up the lock file.
+        if [ "X$LOCKPROP" != "X" ]
+        then
+            getpid
+            if [ "X$pid" = "X" ]
+            then
+                # Wrapper is not running so make sure the lock file is deleted.
+                if [ -f "$LOCKFILE" ]
+                then
+                    rm "$LOCKFILE"
+                fi
+            fi
+        fi
+
+        exit 0
+    fi
+}
+
+getpid() {
+    if [ -f "$PIDFILE" ]
+    then
+        if [ -r "$PIDFILE" ]
+        then
+            pid=`cat "$PIDFILE"`
+            if [ "X$pid" != "X" ]
+            then
+                # It is possible that 'a' process with the pid exists but that it is not the
+                #  correct process.  This can happen in a number of cases, but the most
+                #  common is during system startup after an unclean shutdown.
+                # The ps statement below looks for the specific wrapper command running as
+                #  the pid.  If it is not found then the pid file is considered to be stale.
+                pidtest=`$PSEXE -p $pid -o args | grep "$WRAPPER_CMD" | tail -1`
+                if [ "X$pidtest" = "X" ]
+                then
+                    # This is a stale pid file.
+                    rm -f "$PIDFILE"
+                    echo "Removed stale pid file: $PIDFILE"
+                    pid=""
+                fi
+            fi
+        else
+            echo "Cannot read $PIDFILE."
+            exit 1
+        fi
+    fi
+}
+
+testpid() {
+    pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
+    if [ "X$pid" = "X" ]
+    then
+        # Process is gone so remove the pid file.
+        rm -f "$PIDFILE"
+        pid=""
+    fi
+}
+
+console() {
+    echo "Running $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        # The string passed to eval must handles spaces in paths correctly.
+        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" $ANCHORPROP $LOCKPROP"
+        eval $COMMAND_LINE
+    else
+        echo "$APP_LONG_NAME is already running."
+        exit 1
+    fi
+}
+ 
+start() {
+    echo "Starting $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        # The string passed to eval must handles spaces in paths correctly.
+        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $LOCKPROP"
+        eval $COMMAND_LINE
+    else
+        echo "$APP_LONG_NAME is already running."
+        exit 1
+    fi
+    getpid
+    if [ "X$pid" != "X" ]
+    then
+        echo "Started $APP_LONG_NAME."
+    else
+        echo "Failed to start $APP_LONG_NAME."
+    fi    
+}
+ 
+stopit() {
+    echo "Stopping $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        echo "$APP_LONG_NAME was not running."
+    else
+        if [ "X$IGNORE_SIGNALS" = "X" ]
+        then
+            # Running so try to stop it.
+            kill $pid
+            if [ $? -ne 0 ]
+            then
+                # An explanation for the failure should have been given
+                echo "Unable to stop $APP_LONG_NAME."
+                exit 1
+            fi
+        else
+            rm -f "$ANCHORFILE"
+            if [ -f "$ANCHORFILE" ]
+            then
+                # An explanation for the failure should have been given
+                echo "Unable to stop $APP_LONG_NAME."
+                exit 1
+            fi
+        fi
+
+        # We can not predict how long it will take for the wrapper to
+        #  actually stop as it depends on settings in wrapper.conf.
+        #  Loop until it does.
+        savepid=$pid
+        CNT=0
+        TOTCNT=0
+        while [ "X$pid" != "X" ]
+        do
+            # Show a waiting message every 5 seconds.
+            if [ "$CNT" -lt "5" ]
+            then
+                CNT=`expr $CNT + 1`
+            else
+                echo "Waiting for $APP_LONG_NAME to exit..."
+                CNT=0
+            fi
+            TOTCNT=`expr $TOTCNT + 1`
+
+            sleep 1
+
+            testpid
+        done
+
+        pid=$savepid
+        testpid
+        if [ "X$pid" != "X" ]
+        then
+            echo "Failed to stop $APP_LONG_NAME."
+            exit 1
+        else
+            echo "Stopped $APP_LONG_NAME."
+        fi
+    fi
+}
+
+status() {
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        echo "$APP_LONG_NAME is not running."
+        exit 1
+    else
+        echo "$APP_LONG_NAME is running ($pid)."
+        exit 0
+    fi
+}
+
+dump() {
+    echo "Dumping $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        echo "$APP_LONG_NAME was not running."
+
+    else
+        kill -3 $pid
+
+        if [ $? -ne 0 ]
+        then
+            echo "Failed to dump $APP_LONG_NAME."
+            exit 1
+        else
+            echo "Dumped $APP_LONG_NAME."
+        fi
+    fi
+}
+
+case "$1" in
+
+    'console')
+        checkUser touchlock $1
+        console
+        ;;
+
+    'start')
+        checkUser touchlock $1
+        start
+        ;;
+
+    'stop')
+        checkUser "" $1
+        stopit
+        ;;
+
+    'restart')
+        checkUser touchlock $1
+        stopit
+        start
+        ;;
+
+    'status')
+        checkUser "" $1
+        status
+        ;;
+
+    'dump')
+        checkUser "" $1
+        dump
+        ;;
+
+    *)
+        echo "Usage: $0 { console | start | stop | restart | status | dump }"
+        exit 1
+        ;;
+esac
+
+exit 0
diff --git a/development/nexus/slack-desc b/development/nexus/slack-desc
new file mode 100644
index 000000000000..51dd3bf53b16
--- /dev/null
+++ b/development/nexus/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+nexus: Nexus (Maven repository manager)
+nexus:
+nexus: Nexus manages software artifacts required for development, deployment,
+nexus: and provisioning. If you develop software, Nexus can help you share 
+nexus: those artifacts with other developers and end-users.
+nexus: Nexus greatly simplifies the maintenance of your own internal 
+nexus: repositories and access to external repositories.
+nexus:
+nexus: Homepage: http://nexus.sonatype.org
+nexus:
+nexus:
diff --git a/development/nexus/wrapper.conf b/development/nexus/wrapper.conf
new file mode 100644
index 000000000000..b570ea1eaea9
--- /dev/null
+++ b/development/nexus/wrapper.conf
@@ -0,0 +1,182 @@
+# JSW Configuration file
+#
+# For complete coverage of available configuration, please go here:
+# http://wrapper.tanukisoftware.org/doc/english/properties.html
+#
+# Some "most often used" keywords are added to end of this file
+# to be used as a "guideline". They are NOT the complete list of
+# keywords.
+
+
+# Include the platform specific path of JSW configuration
+include ./platform.conf
+
+# Set the JSW working directory (used as base for resolving relative paths)
+wrapper.working.dir=../../..
+
+# Set the JVM executable 
+# (modify this to absolute path if you need a Java that is not on the OS path)
+wrapper.java.command=%JAVA_HOME%/bin/java
+
+# The main class that JSW will execute within JVM
+wrapper.java.mainclass=org.codehaus.plexus.classworlds.launcher.Launcher
+
+# The JVM classpath
+wrapper.java.classpath.1=bin/jsw/lib/wrapper-3.2.3.jar
+wrapper.java.classpath.2=./runtime/apps/nexus/lib/plexus-classworlds-*.jar
+wrapper.java.classpath.3=./conf/
+
+# Additional JVM parameters (tune if needed, but match the sequence of numbers!)
+wrapper.java.additional.1=-Dsun.net.inetaddr.ttl=3600
+wrapper.java.additional.2=-Dbasedir=.
+#wrapper.java.additional.3=-Djava.io.tmpdir=./runtime/tmp
+wrapper.java.additional.3=-Djava.io.tmpdir=/var/tmp/nexus
+#wrapper.java.additional.4=-Xdebug
+#wrapper.java.additional.5=-Xnoagent
+#wrapper.java.additional.6=-Djava.compiler=NONE
+#wrapper.java.additional.7=-Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000
+#wrapper.java.additional.8=-XX:+HeapDumpOnOutOfMemoryError
+
+
+# Size Java memory, in MB (-Xms)
+#wrapper.java.initmemory=128
+# Size Java memory, in MB (-Xmx)
+#wrapper.java.maxmemory=256
+
+# How much to wait for JVM to respond to "ping" (increase on slower machines and VMs if needed)
+wrapper.ping.timeout=90
+# How much to wait for application to start up (increase on slower machines if needed)
+wrapper.startup.timeout=90
+
+# Make wrapper reload configuration between app restarts
+# and set exit code 12 as "RESTART" command
+wrapper.restart.reload_configuration=TRUE
+wrapper.on_exit.12=RESTART
+
+# Set up JSW logging
+#wrapper.logfile=logs/wrapper.log
+wrapper.logfile=/var/log/nexus/wrapper.log
+wrapper.logfile.format=PM
+wrapper.logfile.loglevel=INFO
+wrapper.logfile.maxsize=10m
+wrapper.logfile.maxfiles=10
+
+# Set up system logging (if needed, change to INFO or other valid values)
+wrapper.syslog.loglevel=NONE
+
+# Set up JSW Console
+wrapper.console.title=Nexus OSS
+wrapper.console.format=PM
+wrapper.console.loglevel=INFO
+wrapper.console.flush=true
+
+# =============================================
+# An example wrapper.conf file is included
+# below for quick reference
+# =============================================
+
+# ********************************************************************
+# Wrapper Java Properties
+# ********************************************************************
+# Java Application
+#wrapper.java.command=java
+
+# Tell the Wrapper to log the full generated Java command line.
+#wrapper.java.command.loglevel=INFO
+
+# Java Main class.  This class must implement the WrapperListener interface
+#  or guarantee that the WrapperManager class is initialized.  Helper
+#  classes are provided to do this for you.  See the Integration section
+#  of the documentation for details.
+#wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
+
+# Java Classpath (include wrapper.jar)  Add class path elements as
+#  needed starting from 1
+#wrapper.java.classpath.1=../lib/wrapper.jar
+
+# Java Library Path (location of Wrapper.DLL or libwrapper.so)
+#wrapper.java.library.path.1=../lib
+
+# Java Bits.  On applicable platforms, tells the JVM to run in 32 or 64-bit mode.
+#wrapper.java.additional.auto_bits=TRUE
+
+# Java Additional Parameters
+#wrapper.java.additional.1=
+
+# Initial Java Heap Size (in MB)
+#wrapper.java.initmemory=3
+
+# Maximum Java Heap Size (in MB)
+#wrapper.java.maxmemory=64
+
+# Application parameters.  Add parameters as needed starting from 1
+#wrapper.app.parameter.1=<YourMainClass>
+
+# ********************************************************************
+# Wrapper Logging Properties
+# ********************************************************************
+# Enables Debug output from the Wrapper.
+#wrapper.debug=TRUE
+
+# Format of output for the console.  (See docs for formats)
+#wrapper.console.format=PM
+
+# Log Level for console output.  (See docs for log levels)
+#wrapper.console.loglevel=INFO
+
+# Log file to use for wrapper output logging.
+#wrapper.logfile=../logs/wrapper.log
+
+# Format of output for the log file.  (See docs for formats)
+#wrapper.logfile.format=LPTM
+
+# Log Level for log file output.  (See docs for log levels)
+#wrapper.logfile.loglevel=INFO
+
+# Maximum size that the log file will be allowed to grow to before
+#  the log is rolled. Size is specified in bytes.  The default value
+#  of 0, disables log rolling.  May abbreviate with the 'k' (kb) or
+#  'm' (mb) suffix.  For example: 10m = 10 megabytes.
+#wrapper.logfile.maxsize=0
+
+# Maximum number of rolled log files which will be allowed before old
+#  files are deleted.  The default value of 0 implies no limit.
+#wrapper.logfile.maxfiles=0
+
+# Log Level for sys/event log output.  (See docs for log levels)
+#wrapper.syslog.loglevel=NONE
+
+# ********************************************************************
+# Wrapper General Properties
+# ********************************************************************
+# Allow for the use of non-contiguous numbered properties
+#wrapper.ignore_sequence_gaps=TRUE
+
+# Title to use when running as a console
+#wrapper.console.title=@app.long.name@
+
+# ********************************************************************
+# Wrapper Windows NT/2000/XP Service Properties
+# ********************************************************************
+# WARNING - Do not modify any of these properties when an application
+#  using this configuration file has been installed as a service.
+#  Please uninstall the service before modifying this section.  The
+#  service can then be reinstalled.
+
+# Name of the service
+#wrapper.name=@app.name@
+
+# Display name of the service
+#wrapper.displayname=@app.long.name@
+
+# Description of the service
+#wrapper.description=@app.description@
+
+# Service dependencies.  Add dependencies as needed starting from 1
+#wrapper.ntservice.dependency.1=
+
+# Mode in which the service is installed.  AUTO_START, DELAY_START or DEMAND_START
+#wrapper.ntservice.starttype=AUTO_START
+
+# Allow the service to interact with the desktop.
+#wrapper.ntservice.interactive=false