system/openct: Added to 12.1 repository

6 files changed, 339 insertions, 0 deletions

diff --git a/system/openct/README b/system/openct/README
new file mode 100644
index 0000000000000..9824b881f1fb8
--- /dev/null
+++ b/system/openct/README
@@ -0,0 +1,34 @@
+OpenCT implements drivers for several smart card readers.  It comes as
+driver in ifdhandler format for PC/SC-Lite, as CT-API driver, or as
+a small and lean middleware, so applications can use it with minimal
+overhead. OpenCT also has a primitive mechanism to export smart card
+readers to remote machines via TCP/IP.
+
+This requires pcsc-lite (available on SlackBuilds.org).
+
+For serial and pcmcia readers only, for using it as a PC/SC ifdhandler,
+you have to edit file reader-openct.conf in /etc/reader.conf.d/, to
+comment lines in other file(s) and run "/usr/sbin/update-reader.conf".
+
+Compiling with "APIDOC=1 ./openct.SlackBuild" produces API .pdf
+documentation (mainly intended for developers).
+
+Compiling with "NONPRIV=1 ./openct.SlackBuild" enable non-privileged
+mode, but you need to modify /etc/rc.d/rc.openctd to allow 'chown' to
+change user/group.
+
+To start OpenCT daemon, run "/etc/rc.d/rc.openctd start". This is 
+most easily accomplished by adding the following to /etc/rc.d/rc.local:
+	if [ -x /etc/rc.d/rc.openctd ]; then
+		/etc/rc.d/rc.openctd start
+	fi
+
+Beware!
+- OpenCT daemon is meant as _alternative_ to pcsc-lite: running rc.openctd
+and rc.pcscd at the same time can and will lead to unforseeable problems
+(specially with usb devices that can be managed by both of them, one daemon
+can claim one device, making it unavailable for other daemon).
+- for some unknown reasons, if you start rc.openctd and then stop it,
+you may need unplug and plug-in your usb smartcard reader in order
+to it to be seen again, so udev rule is re-applied.
+
diff --git a/system/openct/doinst.sh b/system/openct/doinst.sh
new file mode 100644
index 0000000000000..359dfdfc76be9
--- /dev/null
+++ b/system/openct/doinst.sh
@@ -0,0 +1,23 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.openctd.new:
+if [ -e etc/rc.d/rc.openctd ]; then
+  cp -a etc/rc.d/rc.openctd etc/rc.d/rc.openctd.new.incoming
+  cat etc/rc.d/rc.openctd.new > etc/rc.d/rc.openctd.new.incoming
+  mv etc/rc.d/rc.openctd.new.incoming etc/rc.d/rc.openctd.new
+fi
+
+config etc/rc.d/rc.openctd.new
+config etc/openct.conf.new
+config etc/reader.conf.d/reader-openct.conf.new
diff --git a/system/openct/openct.SlackBuild b/system/openct/openct.SlackBuild
new file mode 100644
index 0000000000000..f3db81a3e30e4
--- /dev/null
+++ b/system/openct/openct.SlackBuild
@@ -0,0 +1,191 @@
+#!/bin/sh
+
+# Slackware build script for openct
+
+# Copyright 2008  LukenShiro <lukenshiro@ngi.it>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=openct
+VERSION=${VERSION:-0.6.15}
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+APIDOC=${APIDOC:-0}		# api documentation not built by default
+NONPRIV=${NONPRIV:-0}		# disable not-privileged mode (it will be used by root)
+DOCFILES="NEWS TODO LGPL-2.1"
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+fi
+
+set -e 	# Exit on most errors
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+
+# building API doc
+case "$APIDOC" in
+    0)	APIDOC_FLAG="dis"
+	;;
+    *)	APIDOC_FLAG="en"
+	;;
+esac
+
+# daemon user/group seem not to be really used unless for /var/run/openct,
+# so set them to a saner 'root:root' or 'root:plugdev' (instead of upstream's 
+# 'openctd:usb'): for now it's unnecessary to add other user/group.
+# If NONPRIV is enabled you'll have to verify /etc/rc.d/rc.openctd accordingly.
+case "$NONPRIV" in
+    0)	NONPRIV_FLAGS="--with-daemon-user=root \
+    --with-daemon-groups=root --disable-non-privileged"	# root-only
+	;;
+    *)	NONPRIV_FLAGS="--with-daemon-user=root \
+    --with-daemon-groups=plugdev --enable-non-privileged"	# non privileged mode
+	;;
+esac
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --datarootdir=/usr/share \
+  --mandir=/usr/man \
+  --disable-static \
+  --enable-usb \
+  --enable-pcsc \
+  --enable-doc \
+  --with-udev=/lib/udev \
+  --with-bundle=/usr/lib/pcsc/drivers \
+  --${APIDOC_FLAG}able-api-doc \
+  --with-ifddir \
+  --disable-static \
+  --build=$ARCH-slackware-linux \
+  $NONPRIV_FLAGS
+
+make
+make install DESTDIR=$PKG
+
+# copy Slackware-compliant openct daemon (instead of original 'init-script' file)
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.openctd > $PKG/etc/rc.d/rc.openctd.new
+chmod 0755 $PKG/etc/rc.d/rc.openctd.new
+case "$NONPRIV" in
+    0)	true	# do nothing
+	;;
+    *)	 # enable non-privileged in rc.openctd
+        sed -i "s|#chown root:plugdev|chown root:plugdev|g" $PKG/etc/rc.d/rc.openctd.new
+	sed -i "s|#chmod 750|chmod 750|g" $PKG/etc/rc.d/rc.openctd.new
+        ;;
+esac
+
+# Don't clobber the config file
+mv $PKG/etc/openct.conf $PKG/etc/openct.conf.new
+
+# used for serial devices within pcsc-lite
+# entries decommented by default (as they could tamper with pcsc-lite's device detection)
+# renamed to avoid pcsc-lite's reader.conf overwriting
+mkdir -p $PKG/etc/reader.conf.d
+cp -a etc/reader.conf $PKG/etc/reader.conf.d/reader-openct.conf.new
+sed -i "s|^FRIENDLYNAME|#FRIENDLYNAME|g" $PKG/etc/reader.conf.d/reader-openct.conf.new
+sed -i "s|^DEVICENAME|#DEVICENAME|g" $PKG/etc/reader.conf.d/reader-openct.conf.new
+sed -i "s|^LIBPATH|#LIBPATH|g" $PKG/etc/reader.conf.d/reader-openct.conf.new
+sed -i "s|^CHANNELID|#CHANNELID|g" $PKG/etc/reader.conf.d/reader-openct.conf.new
+
+# installing udev scripts for openct
+mkdir -p $PKG/lib/udev
+install -m755 etc/openct_usb $PKG/lib/udev/openct_usb
+install -m755 etc/openct_pcmcia $PKG/lib/udev/openct_pcmcia
+install -m755 etc/openct_serial $PKG/lib/udev/openct_serial
+# to maintain forward compatibility with more recent udev (particularly Slackware post-12.1 current's udev)
+sed -i "s|udevinfo|udevadm info|g" $PKG/lib/udev/openct_usb
+
+# installing udev rules for openct
+mkdir -p $PKG/etc/udev/rules.d
+cp -a etc/openct.udev $PKG/etc/udev/rules.d/95-openct.rules
+# update attributes according to recent udev rules' naming convention
+sed -i "s|SYSFS{|ATTR{|g" $PKG/etc/udev/rules.d/95-openct.rules
+# modification taken to prevent bug (as happened in other distributions: 
+# i.e. https://bugzilla.redhat.com/287871):
+# it seems 'sleep' program would otherwise be applied to every usb add event,
+# not only to this one
+sed -i "s|^PROGRAM=|#PROGRAM=|g" $PKG/etc/udev/rules.d/95-openct.rules
+
+# REMINDER for slackware-current post-12.1:
+# as WAIT_FOR_SYSFS is replaced by WAIT_FOR in udev>=123:
+#sed -i "s|WAIT_FOR_SYSFS=|WAIT_FOR=|g" $PKG/etc/udev/rules.d/95-openct.rules
+# maybe it will have to be moved to /lib/udev/rules.d/, too
+
+# installing openct rules/script for hal
+mkdir -p $PKG/usr/share/hal/fdi/information/10freedesktop/
+cp -a etc/openct.fdi $PKG/usr/share/hal/fdi/information/10freedesktop/10-usb-openct.fdi
+mkdir -p $PKG/usr/libexec
+cp -a etc/openct.hald $PKG/usr/libexec/hald-addon-openct
+
+# directory for status, socket and lock files
+mkdir -p $PKG/var/run/openct
+case "$NONPRIV" in
+    0)	USR_GRP="root:root"		# root-only
+	;;
+    *)	USR_GRP="root:plugdev"		# non privileged mode
+	;;
+esac
+chown $USR_GRP $PKG/var/run/openct
+
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+( cd $PKG/usr/man
+  find . -type f -exec gzip -9 {} \;
+  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+)
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/
+cp -a $DOCFILES $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+cat $CWD/README > $PKG/usr/doc/$PRGNAM-$VERSION/README.SBo
+[ "$APIDOC" = "0" ] && rm -rf $PKG/usr/doc/$PRGNAM-$VERSION/api
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/system/openct/openct.info b/system/openct/openct.info
new file mode 100644
index 0000000000000..33eb4739513ea
--- /dev/null
+++ b/system/openct/openct.info
@@ -0,0 +1,8 @@
+PRGNAM="openct"
+VERSION="0.6.15"
+HOMEPAGE="http://www.opensc-project.org/openct/"
+DOWNLOAD="http://www.opensc-project.org/files/openct/openct-0.6.15.tar.gz"
+MD5SUM="70205beac03974e266fc259b6c9feaa8"
+MAINTAINER="LukenShiro"
+EMAIL="lukenshiro@ngi.it"
+APPROVED="rworkman"
diff --git a/system/openct/rc.openctd b/system/openct/rc.openctd
new file mode 100644
index 0000000000000..93244034aede1
--- /dev/null
+++ b/system/openct/rc.openctd
@@ -0,0 +1,64 @@
+#! /bin/sh
+#
+# rc.openctd
+# based on original upstream openct's init-script, modified for
+# SlackBuilds.org by LukenShiro <lukenshiro<at>ngi.it>
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/usr/sbin/openct-control
+NAME="OpenCT smart card terminal framework"
+OPENCT_OPTS=""
+
+set -e
+
+openctd_start() {
+	if [ -x $DAEMON ]; then
+	    echo "Starting $NAME ..."
+	    # create the directory for our status and socket files,
+	    # if it does not exist.
+	    [[ -e "/var/run/openct" ]] || mkdir -p /var/run/openct
+
+    	    # maybe you also want to set ownership and permissions here.
+	    # this example would assign the directory to a group "plugdev"
+	    # and set permissions so only users in that group can access
+	    # smart card readers via openct.
+	    #chown root:plugdev /var/run/openct
+	    #chmod 0750 /var/run/openct
+
+	    $DAEMON $OPENCT_OPTS init
+	fi
+}
+
+openctd_stop() {
+	if [ -x $DAEMON ]; then
+	    echo "Starting $NAME ..."
+	    $DAEMON $OPENCT_OPTS shutdown
+
+	    # remove old status (just in case)
+	    [[ -e "/var/run/openct/status" ]] && rm -f /var/run/openct/status
+	    # remove socket and lock files (they seem not to be deleted by daemon)
+	    rm -f /var/run/openct/0 /var/run/openct/status.lock* 2>&1 >/dev/null
+	fi
+}
+
+openctd_restart() {
+	openctd_stop
+	sleep 0.1	# keep original sleep duration
+	openctd_start
+}
+
+case "$1" in
+    'start')
+	openctd_start
+	;;
+    'stop')
+	openctd_stop
+	;;
+    'restart')
+	openctd_restart
+	;;
+    *)
+	echo "Usage: $0 {start|stop|restart}" >&2
+	exit 1
+	;;
+esac
diff --git a/system/openct/slack-desc b/system/openct/slack-desc
new file mode 100644
index 0000000000000..772bb515a8c1b
--- /dev/null
+++ b/system/openct/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler---------------------------------------------------|
+openct: openct (Middleware framework for smart card terminals)
+openct: 
+openct: It implements drivers for several smart card readers.  It comes as
+openct: driver in ifdhandler format for PC/SC-Lite, as CT-API driver, or
+openct: as a small and lean middleware, so applications can use it with 
+openct: minimal overhead.  OpenCT also has a primitive mechanism to export 
+openct: smart card readers to remote machines via TCP/IP.
+openct: 
+openct: Homepage: http://www.opensc-project.org/openct/
+openct: 
+openct: