path: root/hw/intc/arm_gicv3_common.c

/*
 * ARM GICv3 support - common bits of emulated and KVM kernel model
 *
 * Copyright (c) 2012 Linaro Limited
 * Copyright (c) 2015 Huawei.
 * Copyright (c) 2015 Samsung Electronics Co., Ltd.
 * Written by Peter Maydell
 * Reworked for GICv3 by Shlomo Pongratz and Pavel Fedin
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, see <http://www.gnu.org/licenses/>.
 */

#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qom/cpu.h"
#include "hw/intc/arm_gicv3_common.h"
#include "gicv3_internal.h"
#include "hw/arm/linux-boot-if.h"

static void gicv3_pre_save(void *opaque)
{
    GICv3State *s = (GICv3State *)opaque;
    ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);

    if (c->pre_save) {
        c->pre_save(s);
    }
}

static int gicv3_post_load(void *opaque, int version_id)
{
    GICv3State *s = (GICv3State *)opaque;
    ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);

    if (c->post_load) {
        c->post_load(s);
    }
    return 0;
}

static const VMStateDescription vmstate_gicv3 = {
    .name = "arm_gicv3",
    .unmigratable = 1,
    .pre_save = gicv3_pre_save,
    .post_load = gicv3_post_load,
};

void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
                              const MemoryRegionOps *ops)
{
    SysBusDevice *sbd = SYS_BUS_DEVICE(s);
    int i;

    /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
     * GPIO array layout is thus:
     *  [0..N-1] spi
     *  [N..N+31] PPIs for CPU 0
     *  [N+32..N+63] PPIs for CPU 1
     *   ...
     */
    i = s->num_irq - GIC_INTERNAL + GIC_INTERNAL * s->num_cpu;
    qdev_init_gpio_in(DEVICE(s), handler, i);

    for (i = 0; i < s->num_cpu; i++) {
        sysbus_init_irq(sbd, &s->cpu[i].parent_irq);
    }
    for (i = 0; i < s->num_cpu; i++) {
        sysbus_init_irq(sbd, &s->cpu[i].parent_fiq);
    }

    memory_region_init_io(&s->iomem_dist, OBJECT(s), ops, s,
                          "gicv3_dist", 0x10000);
    memory_region_init_io(&s->iomem_redist, OBJECT(s), ops ? &ops[1] : NULL, s,
                          "gicv3_redist", 0x20000 * s->num_cpu);

    sysbus_init_mmio(sbd, &s->iomem_dist);
    sysbus_init_mmio(sbd, &s->iomem_redist);
}

static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
{
    GICv3State *s = ARM_GICV3_COMMON(dev);
    int i;

    /* revision property is actually reserved and currently used only in order
     * to keep the interface compatible with GICv2 code, avoiding extra
     * conditions. However, in future it could be used, for example, if we
     * implement GICv4.
     */
    if (s->revision != 3) {
        error_setg(errp, "unsupported GIC revision %d", s->revision);
        return;
    }

    if (s->num_irq > GICV3_MAXIRQ) {
        error_setg(errp,
                   "requested %u interrupt lines exceeds GIC maximum %d",
                   s->num_irq, GICV3_MAXIRQ);
        return;
    }
    if (s->num_irq < GIC_INTERNAL) {
        error_setg(errp,
                   "requested %u interrupt lines is below GIC minimum %d",
                   s->num_irq, GIC_INTERNAL);
        return;
    }

    /* ITLinesNumber is represented as (N / 32) - 1, so this is an
     * implementation imposed restriction, not an architectural one,
     * so we don't have to deal with bitfields where only some of the
     * bits in a 32-bit word should be valid.
     */
    if (s->num_irq % 32) {
        error_setg(errp,
                   "%d interrupt lines unsupported: not divisible by 32",
                   s->num_irq);
        return;
    }

    s->cpu = g_new0(GICv3CPUState, s->num_cpu);

    for (i = 0; i < s->num_cpu; i++) {
        CPUState *cpu = qemu_get_cpu(i);
        uint64_t cpu_affid;
        int last;

        s->cpu[i].cpu = cpu;
        s->cpu[i].gic = s;

        /* Pre-construct the GICR_TYPER:
         * For our implementation:
         *  Top 32 bits are the affinity value of the associated CPU
         *  CommonLPIAff == 01 (redistributors with same Aff3 share LPI table)
         *  Processor_Number == CPU index starting from 0
         *  DPGS == 0 (GICR_CTLR.DPG* not supported)
         *  Last == 1 if this is the last redistributor in a series of
         *            contiguous redistributor pages
         *  DirectLPI == 0 (direct injection of LPIs not supported)
         *  VLPIS == 0 (virtual LPIs not supported)
         *  PLPIS == 0 (physical LPIs not supported)
         */
        cpu_affid = object_property_get_int(OBJECT(cpu), "mp-affinity", NULL);
        last = (i == s->num_cpu - 1);

        /* The CPU mp-affinity property is in MPIDR register format; squash
         * the affinity bytes into 32 bits as the GICR_TYPER has them.
         */
        cpu_affid = (cpu_affid & 0xFF00000000ULL >> 8) | (cpu_affid & 0xFFFFFF);
        s->cpu[i].gicr_typer = (cpu_affid << 32) |
            (1 << 24) |
            (i << 8) |
            (last << 4);
    }
}

static void arm_gicv3_common_reset(DeviceState *dev)
{
    GICv3State *s = ARM_GICV3_COMMON(dev);
    int i;

    for (i = 0; i < s->num_cpu; i++) {
        GICv3CPUState *cs = &s->cpu[i];

        cs->level = 0;
        cs->gicr_ctlr = 0;
        cs->gicr_statusr[GICV3_S] = 0;
        cs->gicr_statusr[GICV3_NS] = 0;
        cs->gicr_waker = GICR_WAKER_ProcessorSleep | GICR_WAKER_ChildrenAsleep;
        cs->gicr_propbaser = 0;
        cs->gicr_pendbaser = 0;
        /* If we're resetting a TZ-aware GIC as if secure firmware
         * had set it up ready to start a kernel in non-secure, we
         * need to set interrupts to group 1 so the kernel can use them.
         * Otherwise they reset to group 0 like the hardware.
         */
        if (s->irq_reset_nonsecure) {
            cs->gicr_igroupr0 = 0xffffffff;
        } else {
            cs->gicr_igroupr0 = 0;
        }

        cs->gicr_ienabler0 = 0;
        cs->gicr_ipendr0 = 0;
        cs->gicr_iactiver0 = 0;
        cs->edge_trigger = 0xffff;
        cs->gicr_igrpmodr0 = 0;
        cs->gicr_nsacr = 0;
        memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr));

        /* State in the CPU interface must *not* be reset here, because it
         * is part of the CPU's reset domain, not the GIC device's.
         */
    }

    /* For our implementation affinity routing is always enabled */
    if (s->security_extn) {
        s->gicd_ctlr = GICD_CTLR_ARE_S | GICD_CTLR_ARE_NS;
    } else {
        s->gicd_ctlr = GICD_CTLR_DS | GICD_CTLR_ARE;
    }

    s->gicd_statusr[GICV3_S] = 0;
    s->gicd_statusr[GICV3_NS] = 0;

    memset(s->group, 0, sizeof(s->group));
    memset(s->grpmod, 0, sizeof(s->grpmod));
    memset(s->enabled, 0, sizeof(s->enabled));
    memset(s->pending, 0, sizeof(s->pending));
    memset(s->active, 0, sizeof(s->active));
    memset(s->level, 0, sizeof(s->level));
    memset(s->edge_trigger, 0, sizeof(s->edge_trigger));
    memset(s->gicd_ipriority, 0, sizeof(s->gicd_ipriority));
    memset(s->gicd_irouter, 0, sizeof(s->gicd_irouter));
    memset(s->gicd_nsacr, 0, sizeof(s->gicd_nsacr));

    if (s->irq_reset_nonsecure) {
        /* If we're resetting a TZ-aware GIC as if secure firmware
         * had set it up ready to start a kernel in non-secure, we
         * need to set interrupts to group 1 so the kernel can use them.
         * Otherwise they reset to group 0 like the hardware.
         */
        for (i = GIC_INTERNAL; i < s->num_irq; i++) {
            gicv3_gicd_group_set(s, i);
        }
    }
}

static void arm_gic_common_linux_init(ARMLinuxBootIf *obj,
                                      bool secure_boot)
{
    GICv3State *s = ARM_GICV3_COMMON(obj);

    if (s->security_extn && !secure_boot) {
        /* We're directly booting a kernel into NonSecure. If this GIC
         * implements the security extensions then we must configure it
         * to have all the interrupts be NonSecure (this is a job that
         * is done by the Secure boot firmware in real hardware, and in
         * this mode QEMU is acting as a minimalist firmware-and-bootloader
         * equivalent).
         */
        s->irq_reset_nonsecure = true;
    }
}

static Property arm_gicv3_common_properties[] = {
    DEFINE_PROP_UINT32("num-cpu", GICv3State, num_cpu, 1),
    DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32),
    DEFINE_PROP_UINT32("revision", GICv3State, revision, 3),
    DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0),
    DEFINE_PROP_END_OF_LIST(),
};

static void arm_gicv3_common_class_init(ObjectClass *klass, void *data)
{
    DeviceClass *dc = DEVICE_CLASS(klass);
    ARMLinuxBootIfClass *albifc = ARM_LINUX_BOOT_IF_CLASS(klass);

    dc->reset = arm_gicv3_common_reset;
    dc->realize = arm_gicv3_common_realize;
    dc->props = arm_gicv3_common_properties;
    dc->vmsd = &vmstate_gicv3;
    albifc->arm_linux_init = arm_gic_common_linux_init;
}

static const TypeInfo arm_gicv3_common_type = {
    .name = TYPE_ARM_GICV3_COMMON,
    .parent = TYPE_SYS_BUS_DEVICE,
    .instance_size = sizeof(GICv3State),
    .class_size = sizeof(ARMGICv3CommonClass),
    .class_init = arm_gicv3_common_class_init,
    .abstract = true,
    .interfaces = (InterfaceInfo []) {
        { TYPE_ARM_LINUX_BOOT_IF },
        { },
    },
};

static void register_types(void)
{
    type_register_static(&arm_gicv3_common_type);
}

type_init(register_types)