aboutsummaryrefslogtreecommitdiff
path: root/vl.c
AgeCommit message (Collapse)Author
2018-10-19COLO: Remove colo_state migration structZhang Chen
We need to know if migration is going into COLO state for incoming side before start normal migration. Instead by using the VMStateDescription to send colo_state from source side to destination side, we use MIG_CMD_ENABLE_COLO to indicate whether COLO is enabled or not. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-10-05vl: list user creatable properties when 'help' is argumentMarc-André Lureau
Iterate over the writable class properties, sort and print them out with the description if available. Ex: qemu -object memory-backend-file,help memory-backend-file.align=int memory-backend-file.discard-data=bool memory-backend-file.dump=bool - Set to 'off' to exclude from core dump memory-backend-file.host-nodes=int - Binds memory to the list of NUMA host nodes memory-backend-file.mem-path=string memory-backend-file.merge=bool - Mark memory as mergeable memory-backend-file.pmem=bool memory-backend-file.policy=HostMemPolicy - Set the NUMA policy memory-backend-file.prealloc=bool - Preallocate memory memory-backend-file.share=bool - Mark the memory as private to QEMU or shared memory-backend-file.size=int - Size of the memory region (ex: 500M) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-05vl: handle -object helpMarc-André Lureau
List the user creatable objects. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-03chardev: mark the calls that allow an implicit mux monitorMarc-André Lureau
This is mostly for readability of the code. Let's make it clear which callers can create an implicit monitor when the chardev is muxed. This will also enforce a safer behaviour, as we don't really support creating monitor anywhere/anytime at the moment. Add an assert() to make sure the programmer explicitely wanted that behaviour. There are documented cases, such as: -serial/-parallel/-virtioconsole and to less extent -debugcon. Less obvious and questionable ones are -gdb, SLIRP -guestfwd and Xen console. Add a FIXME note for those, but keep the support for now. Other qemu_chr_new() callers either have a fixed parameter/filename string or do not need it, such as -qtest: * qtest.c: qtest_init() Afaik, only used by tests/libqtest.c, without mux. I don't think we support it outside of qemu testing: drop support for implicit mux monitor (qemu_chr_new() call: no implicit mux now). * hw/ All with literal @filename argument that doesn't enable mux monitor. * tests/ All with @filename argument that doesn't enable mux monitor. On a related note, the list of monitor creation places: - the chardev creators listed above: all from command line (except perhaps Xen console?) - -gdb & hmp gdbserver will create a "GDB monitor command" chardev that is wired to an HMP monitor. - -mon command line option From this short study, I would like to think that a monitor may only be created in the main thread today, though I remain skeptical :) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-10-02replay: allow loading any snapshots before recordingPavel Dovgalyuk
This patch enables using -loadvm in recording mode to allow starting the execution recording from any of the available snapshots. It also fixes loading of the record/replay state, therefore snapshots created in replay mode may also be used for starting the new recording. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <20180912081939.3228.56131.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02Delete PID file on exitMarc-André Lureau
Register an exit notifier to remove the PID file. By the time atexit() is called, qemu_write_pidfile() guarantees QEMU owns the PID file, thus we could safely remove it when exiting. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180907121319.8607-4-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02util: add qemu_write_pidfile()Marc-André Lureau
There are variants of qemu_create_pidfile() in qemu-pr-helper and qemu-ga. Let's have a common implementation in libqemuutil. The code is initially based from pr-helper write_pidfile(), with various improvements and suggestions from Daniel Berrangé: QEMU will leave the pidfile existing on disk when it exits which initially made me think it avoids the deletion race. The app managing QEMU, however, may well delete the pidfile after it has seen QEMU exit, and even if the app locks the pidfile before deleting it, there is still a race. eg consider the following sequence QEMU 1 libvirtd QEMU 2 1. lock(pidfile) 2. exit() 3. open(pidfile) 4. lock(pidfile) 5. open(pidfile) 6. unlink(pidfile) 7. close(pidfile) 8. lock(pidfile) IOW, at step 8 the new QEMU has successfully acquired the lock, but the pidfile no longer exists on disk because it was deleted after the original QEMU exited. While we could just say no external app should ever delete the pidfile, I don't think that is satisfactory as people don't read docs, and admins don't like stale pidfiles being left around on disk. To make this robust, I think we might want to copy libvirt's approach to pidfile acquisition which runs in a loop and checks that the file on disk /after/ acquiring the lock matches the file that was locked. Then we could in fact safely let QEMU delete its own pidfiles on clean exit.. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180831145314.14736-2-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-28Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert/tags/pull-migration-20180926a' into staging Migration pull 2018-09-26 This supercedes Juan's pull from the 13th # gpg: Signature made Wed 26 Sep 2018 18:07:30 BST # gpg: using RSA key 0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20180926a: migration/ram.c: Avoid taking address of fields in packed MultiFDInit_t struct migration: fix the compression code migration: fix QEMUFile leak tests/migration: Speed up the test on ppc64 migration: cleanup in error paths in loadvm migration/postcopy: Clear have_listen_thread tests/migration: Add migration-test header file tests/migration: Support cross compilation in generating boot header file tests/migration: Convert x86 boot block compilation script into Makefile migration: use save_page_use_compression in flush_compressed_data migration: show the statistics of compression migration: do not flush_compressed_data at the end of iteration Add a hint message to loadvm and exits on failure migration: handle the error condition properly migration: fix calculating xbzrle_counters.cache_miss_rate migration/rdma: Fix uninitialised rdma_return_path Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-28Merge remote-tracking branch 'remotes/otubo/tags/pull-seccomp-20180926' into ↵Peter Maydell
staging pull-seccomp-20180926 # gpg: Signature made Wed 26 Sep 2018 14:20:06 BST # gpg: using RSA key DF32E7C0F0FFF9A2 # gpg: Good signature from "Eduardo Otubo (Senior Software Engineer) <otubo@redhat.com>" # Primary key fingerprint: D67E 1B50 9374 86B4 0723 DBAB DF32 E7C0 F0FF F9A2 * remotes/otubo/tags/pull-seccomp-20180926: seccomp: check TSYNC host capability Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-26seccomp: check TSYNC host capabilityMarc-André Lureau
Remove -sandbox option if the host is not capable of TSYNC, since the sandbox will fail at setup time otherwise. This will help libvirt, for ex, to figure out if -sandbox will work. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Eduardo Otubo <otubo@redhat.com> Acked-by: Eduardo Otubo <otubo@redhat.com>
2018-09-26Add a hint message to loadvm and exits on failureJose Ricardo Ziviani
This patch adds a small hint for the failure case of the load snapshot process. It may be useful for users to remember that the VM configuration has changed between the save and load processes. (qemu) loadvm vm-20180903083641 Unknown savevm section or instance 'cpu_common' 4. Make sure that your current VM setup matches your saved VM setup, including any hotplugged devices Error -22 while loading VM state (qemu) device_add host-spapr-cpu-core,core-id=4 (qemu) loadvm vm-20180903083641 (qemu) c (qemu) info status VM status: running It also exits Qemu if the snapshot cannot be loaded before reaching the main loop (-loadvm in the command line). $ qemu-system-ppc64 ... -loadvm vm-20180903083641 qemu-system-ppc64: Unknown savevm section or instance 'cpu_common' 4. Make sure that your current VM setup matches your saved VM setup, including any hotplugged devices qemu-system-ppc64: Error -22 while loading VM state $ Signed-off-by: Jose Ricardo Ziviani <joserz@linux.ibm.com> Message-Id: <20180903162613.15877-1-joserz@linux.ibm.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-24Merge remote-tracking branch ↵Peter Maydell
'remotes/huth-gitlab/tags/pull-request-2018-08-31' into staging Removal of deprecated options and improvements for the qtests # gpg: Signature made Fri 31 Aug 2018 09:10:23 BST # gpg: using RSA key 2ED9D774FE702DB5 # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" # gpg: aka "Thomas Huth <thuth@redhat.com>" # gpg: aka "Thomas Huth <huth@tuxfamily.org>" # gpg: aka "Thomas Huth <th.huth@posteo.de>" # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2018-08-31: tests: add a qmp success-response test tests: add qmp/qom-set-without-value test tests: add qmp/object-add-without-props test tests: add qmp_assert_error_class() tests/libqos: Utilize newer glib spawn check net: Remove the deprecated -tftp, -bootp, -redir and -smb options Remove the deprecated options -startdate, -localtime and -rtc-td-hack Remove the deprecated -nodefconfig option Remove the deprecated -balloon option Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-31net: Remove the deprecated -tftp, -bootp, -redir and -smb optionsThomas Huth
These options likely do not work as expected as soon as the user tries to use more than one network interface at once. The parameters have been marked as deprecated since QEMU v2.6, so users had plenty of time to move their scripts to the new syntax. Time to remove the old parameters now. Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Acked-by: Peter Krempa <pkrempa@redhat.com> Acked-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-08-31Remove the deprecated options -startdate, -localtime and -rtc-td-hackThomas Huth
Deprecated since two releases, nobody complained, thus it's time to remove them now. Acked-by: Peter Krempa <pkrempa@redhat.com> Acked-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-08-31Remove the deprecated -nodefconfig optionThomas Huth
It's the same as -no-user-config and marked as deprecated since three releases already. Time to remove it now. Acked-by: Peter Krempa <pkrempa@redhat.com> Acked-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-08-31Remove the deprecated -balloon optionThomas Huth
The "-balloon" option has been replaced by "-device virtio-balloon". It's been marked as deprecated since two releases, and nobody complained, so let's remove it now. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Krempa <pkrempa@redhat.com> Acked-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-08-28qapi: Drop qapi_event_send_FOO()'s Error ** argumentPeter Xu
The generated qapi_event_send_FOO() take an Error ** argument. They can't actually fail, because all they do with the argument is passing it to functions that can't fail: the QObject output visitor, and the @qmp_emit callback, which is either monitor_qapi_event_queue() or event_test_emit(). Drop the argument, and pass &error_abort to the QObject output visitor and @qmp_emit instead. Suggested-by: Eric Blake <eblake@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180815133747.25032-4-peterx@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message rewritten, update to qapi-code-gen.txt corrected] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-23kvm: add call to qemu_add_opts() for -overcommit optionPrasad Singamsetty
qemu command fails to process -overcommit option. Add the missing call to qemu_add_opts() in vl.c. Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com> Message-Id: <20180815175704.105902-1-prasad.singamsetty@oracle.com> Reviewed-by: Mark Kanda <mark.kanda@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23vl: add -enable-sync-profileEmilio G. Cota
Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23net: Silence 'has no peer' messages in testing modeThomas Huth
When running qtests with -nodefaults, we are not interested in these 'XYZ has no peer' messages. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1534419358-10932-3-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* IEC units series (Philippe) * Hyper-V PV TLB flush (Vitaly) * git archive detection (Daniel) * host serial passthrough fix (David) * NPT support for SVM emulation (Jan) * x86 "info mem" and "info tlb" fix (Doug) # gpg: Signature made Mon 02 Jul 2018 16:18:21 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (50 commits) tcg: simplify !CONFIG_TCG handling of tb_invalidate_* i386/monitor.c: make addresses canonical for "info mem" and "info tlb" target-i386: Add NPT support serial: Open non-block bsd-user: Use the IEC binary prefix definitions linux-user: Use the IEC binary prefix definitions tests/crypto: Use the IEC binary prefix definitions vl: Use the IEC binary prefix definitions monitor: Use the IEC binary prefix definitions cutils: Do not include "qemu/units.h" directly hw/rdma: Use the IEC binary prefix definitions hw/virtio: Use the IEC binary prefix definitions hw/vfio: Use the IEC binary prefix definitions hw/sd: Use the IEC binary prefix definitions hw/usb: Use the IEC binary prefix definitions hw/net: Use the IEC binary prefix definitions hw/i386: Use the IEC binary prefix definitions hw/ppc: Use the IEC binary prefix definitions hw/mips: Use the IEC binary prefix definitions hw/mips/r4k: Constify params_size ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02vl: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
It eases code review, unit is explicit. Patch generated using: $ git grep -n '[<>][<>]= ?[1-5]0' and modified manually. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-44-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02s390/ipl: fix ipl with -no-rebootChristian Borntraeger
kexec/kdump as well as the bootloader use a subcode of diagnose 308 that is supposed to reset the I/O subsystem but not comprise a full "reboot". With the latest refactoring this is now broken when -no-reboot is used or when libvirt acts on a reboot QMP event, for example a virt-install from iso images. We need to mark these "subsystem resets" as special. Fixes: a30fb811cbe9 (s390x: refactor reset/reipl handling) Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20180622102928.173420-1-borntraeger@de.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-06-28kvm: support -overcommit cpu-pm=on|offMichael S. Tsirkin
With this flag, kvm allows guest to control host CPU power state. This increases latency for other processes using same host CPU in an unpredictable way, but if decreases idle entry/exit times for the running VCPU, so to use it QEMU needs a hint about whether host CPU is overcommitted, hence the flag name. Follow-up patches will expose this capability to guest (using mwait leaf). Based on a patch by Wanpeng Li <kernellwp@gmail.com> . Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20180622192148.178309-2-mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28Deprecate the -enable-hax optionThomas Huth
We currently have got three ways of turning on the HAX accelerator: "-machine accel=hax", "-accel hax" and "-enable-hax". That's really confusing and overloaded. Since "-accel" is our preferred way to enable an accelerator nowadays, and "-accel hax" is even less to type than "-enable-hax", let's deprecate the "-enable-hax" option now. Note: While "-enable-kvm" is available since a long time and can hardly be removed since it is used in a lot of upper layer tools and scripts, the "-enable-hax" option is still rather new and not very widespread yet, so I think that it should be OK if we remove this in a couple of releases again (we'll see whether someone complains after seeing the deprecation message - then we could still reconsider to keep it if there a well-founded reasons). Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1529950933-28347-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-25hw/i386: Deprecate the machine types pc-0.10 and pc-0.11Thomas Huth
The oldest machine type which is still used in a still maintained distro is a pc-0.12 based machine type in RHEL6, so everything that is older than pc-0.12 should not be used anymore. Thus let's deprecate pc-0.10 and pc-0.11 so that we can finally remove them in a future release. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1529917512-10528-1-git-send-email-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-06-25vl.c: do not allow --daemonize in combination with --preconfig CLI optionIgor Mammedov
some users when using --daemonize expect that QEMU will parse CLI options, initialize VM and only then complete daemonzation by signalling lead process to exit and start listening on monitor socket. So users treat parent process exit as sync point to connect to QEMU's monitor. That however doesn't work when --preconfig options is used, since it provides monitor before completing daemonization and expects user to issue exit-preconfig command when additional configuration via monitor is finished. We also can't move completing daemonization before preconfig monitor becomes available, since that would imply: * partially loosing ability to configure QEMU instance in --preconfig mode since QEMU might drop privileges, chroot and do other things when daemonization is completed * lead to loss of error messages in case they would happen after daemonization Be proactive now and make options mutually exclusive, so users would get clear error message instead of waiting for lead process exit indefinitely before connecting to monitor. PS: In case someone would come up with usecase where both options should be enabled at the same time we could drop this restriction as far as daemonization point is left where it is now (os_setup_post). Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1529501059-163139-1-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-06-22vl.c: Don't zero-initialize statics for serial_hdsPeter Maydell
checkpatch reminds us that statics shouldn't be zero-initialized: ERROR: do not initialise statics to 0 or NULL #35: FILE: vl.c:157: +static int num_serial_hds = 0; ERROR: do not initialise statics to 0 or NULL #36: FILE: vl.c:158: +static Chardev **serial_hds = NULL; I forgot to fix this in 6af2692e86f9fdfb3d; do so now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180426140253.3918-1-peter.maydell@linaro.org
2018-06-18monitor: move init global earlierPeter Xu
Before this patch, monitor fd helpers might be called even earlier than monitor_init_globals(). This can be problematic. After previous work, now monitor_init_globals() does not depend on accelerator initialization any more. Call it earlier (before CLI parsing; that's where the monitor APIs might be called) to make sure it is called before any of the monitor APIs. Suggested-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180608035511.7439-7-peterx@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-06-11cli: Don't run early event loop if no --preconfig was specifiedIgor Mammedov
After 047f7038f586d215 it is possible for event loop to run two times. First time whilst parsing command line options (the idea is to bring up monitor early so that management applications can tweak config before machine is initialized). And the second time is after everything is set up (this is the usual place). In both cases the event loop is called as main_loop_wait(nonblocking = false) which causes the event loop to block until at least one event occurred. Now, consider that somebody (i.e. libvirt) calls us with -daemonize. This operation is split in two steps. The main() calls os_daemonize() which fork()-s and then waits in read() until child notifies it via write(): /qemu.git $ ./x86_64-softmmu/qemu-system-x86_64 -S -daemonize \ -no-user-config -nodefaults -nographic main(): child: os_daemonize(): read(pipe[0]) main_loop(): main_loop_wait(false) os_setup_post(): write(pipe[1]) main_loop(): main_loop_wait(false) Here it can be clearly seen that main() does not exit until an event occurs, but at the same time nobody will touch the monitor socket until their exec("qemu-system-*") finishes. So the whole thing deadlocks. The solution is to not call main_loop_wait() unless --preconfig was specified (in which case caller knows they must connect to the socket before exec() finishes). Patch also fixes hang when -nodefaults option is used, which were causing QEMU hang in the early main_loop_wait() indefinitely by the same means (not calling main_loop_wait() unless --preconfig is present on CLI) Based on From: Michal Privoznik <mprivozn@redhat.com> Subject: [PATCH] cli: Don't run early event loop if no --preconfig was specified Message-Id: <ad910973c593c5ac2fed3a10ea958f7e9c12f82c.1527935663.git.mprivozn@redhat.com> Fixes: 047f7038f586d215 Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1528207243-268226-2-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-06-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Linux header upgrade (Peter) * firmware.json definition (Laszlo) * IPMI migration fix (Corey) * QOM improvements (Alexey, Philippe, me) * Memory API cleanups (Jay, me, Tristan, Peter) * WHPX fixes and improvements (Lucian) * Chardev fixes (Marc-André) * IOMMU documentation improvements (Peter) * Coverity fixes (Peter, Philippe) * Include cleanup (Philippe) * -clock deprecation (Thomas) * Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao) * Configurability improvements (me) # gpg: Signature made Fri 01 Jun 2018 17:42:13 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (56 commits) hw: make virtio devices configurable via default-configs/ hw: allow compiling out SCSI memory: Make operations using MemoryRegionIoeventfd struct pass by pointer. char: Remove unwanted crlf conversion qdev: Remove DeviceClass::init() and ::exit() qdev: Simplify the SysBusDeviceClass::init path hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Update Linux headers to 4.17-rc6 target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED scripts/update-linux-headers: Handle kernel license no longer being one file scripts/update-linux-headers: Handle __aligned_u64 virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere gdbstub: Prevent fd leakage docs/interop: add "firmware.json" ipmi: Use proper struct reference for KCS vmstate vmstate: Add a VSTRUCT type tcg: remove softfloat from --disable-tcg builds qemu-options: Mark the non-functional -clock option as deprecated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01qemu-options: Mark the non-functional -clock option as deprecatedThomas Huth
The function is only ignored since QEMU version 1.7.0. Let's mark it as deprecated, so that we can finally completely remove it soon. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1526990298-17924-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01sandbox: disable -sandbox if CONFIG_SECCOMP undefinedYi Min Zhao
If CONFIG_SECCOMP is undefined, the option 'elevatedprivileges' remains compiled. This would make libvirt set the corresponding capability and then trigger failure during guest startup. This patch moves the code regarding seccomp command line options to qemu-seccomp.c file and wraps qemu_opts_foreach finding sandbox option with CONFIG_SECCOMP. Because parse_sandbox() is moved into qemu-seccomp.c file, change seccomp_start() to static function. Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Tested-by: Ján Tomko <jtomko@redhat.com> Acked-by: Eduardo Otubo <otubo@redhat.com>
2018-05-31sandbox: disable -sandbox if CONFIG_SECCOMP undefinedYi Min Zhao
If CONFIG_SECCOMP is undefined, the option 'elevateprivileges' remains compiled. This would make libvirt set the corresponding capability and then trigger failure during guest startup. This patch moves the code regarding seccomp command line options to qemu-seccomp.c file and wraps qemu_opts_foreach finding sandbox option with CONFIG_SECCOMP. Because parse_sandbox() is moved into qemu-seccomp.c file, change seccomp_start() to static function. Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Tested-by: Ján Tomko <jtomko@redhat.com> Acked-by: Eduardo Otubo <otubo@redhat.com> Message-Id: <20180531032937.1925-1-zyimin@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-30cli: add --preconfig optionIgor Mammedov
This option allows pausing QEMU in the new RUN_STATE_PRECONFIG state, allowing the configuration of QEMU from QMP before the machine jumps into board initialization code of machine_run_board_init() The intent is to allow management to query machine state and additionally configure it using previous query results within one QEMU instance (i.e. eliminate the need to start QEMU twice, 1st to query board specific parameters and 2nd for actual VM start using query results for additional parameters). The new option complements -S option and could be used with or without it. The difference is that -S pauses QEMU when the machine is completely initialized with all devices wired up and ready to execute guest code (QEMU needs only to unpause VCPUs to let guest execute its code), while the "preconfig" option pauses QEMU early before board specific init callback (machine_run_board_init) is executed and allows the configuration of machine parameters which will be used by board init code. When early introspection/configuration is done, command 'exit-preconfig' should be used to exit RUN_STATE_PRECONFIG and transition to the next requested state (i.e. if -S is used then QEMU will pause the second time when board/device initialization is completed or start guest execution if -S isn't provided on CLI) PS: Initially 'preconfig' is planned to be used for configuring numa topology depending on board specified possible cpus layout. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1526059483-42847-1-git-send-email-imammedo@redhat.com> [ehabkost: Changed "since 2.13" to "since 3.0"] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-23block: Cancel job in bdrv_close_all() callersKevin Wolf
Now that we cancel all jobs and not only block jobs on shutdown, doing that in bdrv_close_all() isn't really appropriate any more. Move the job_cancel_sync_all() call to the callers, and only assert that there are no job running in bdrv_close_all(). Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-20qemu-options: Allow -no-user-config againMichal Privoznik
After 1217d6ca2bf28c0febe1bd7d5b3fa912bbf6af2a we error out explicitly if an unknown -option was passed on the command line. However, we are doing two pass command line option parsing. In the first pass we just look for -no-user-config or -nodefconfig being present which determines whether we load user config or not. Then in the second pass we finally parse everything else throwing an error if an unsupported -option was found. Problem is that in the second pass -no-user-config and -nodefconfig are not handled explicitly which makes us throw the unsupported option error. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-05-15ui: document non-qapi parser cases.Gerd Hoffmann
Add comments to the cases not (yet) switched over to parse_display_qapi(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180507095539.19584-5-kraxel@redhat.com
2018-05-15ui: switch gtk display to qapi parserGerd Hoffmann
Drop the gtk option parser from parse_display(), so parse_display_qapi() will handle it instead. With this change the parser will accept gl=core and gl=es too, gtk must catch the unsupported gles variant now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180507095539.19584-4-kraxel@redhat.com
2018-05-15ui: switch trivial displays to qapi parserGerd Hoffmann
Drop the option-less display types (egl-headless, curses, none) from parse_display(), so they'll be handled by parse_display_qapi(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180507095539.19584-3-kraxel@redhat.com
2018-05-15ui: add qapi parser for -displayGerd Hoffmann
Add parse_display_qapi() function which parses the -display command line using a qapi visitor for DisplayOptions. Wire up as default catch in parse_display(). Improves the error message for unknown display types. Also enables json as -display argument, i.e. -display "{ 'type': 'gtk' }" Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180507095539.19584-2-kraxel@redhat.com
2018-05-09qemu-options: Remove deprecated -no-kvm-irqchipThomas Huth
We've never documented this option in our qemu-doc, so apart from the users that already used the old qemu-kvm fork before, most users should not be aware of this option at all. It's been marked as deprecated in the source code for a long time already, and officially marked as deprecated in the documentation since QEMU v2.10, so it should be fine to remove this now. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1525453270-23074-5-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-09qemu-options: Remove deprecated -no-kvm-pit-reinjectionThomas Huth
Deprecated since the beginning when it was added for compatibility with the ancient qemu-kvm fork of QEMU, and it even printed out the deprecation warning since right from the start (i.e. QEMU v1.3.0), so it's really time to remove this now. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1525453270-23074-4-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-09qemu-options: Bail out on unsupported options instead of silently ignoring themThomas Huth
The dangling remainder of the -tdf option revealed a deficiency in our option parsing: Options that have been declared, but are not supported in the switch-case statement in vl.c and not handled in the OS-specifc os_parse_cmd_args() functions are currently silently ignored. We should rather tell the users that they specified something that we can not handle, so let's print an error message and exit instead. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1525453270-23074-3-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-09qemu-options: Mark -virtioconsole as deprecatedThomas Huth
The qemu-doc already states that this option is only maintained for backward compatibility and "-device virtconsole" should be used instead. So let's take the next step and mark this option officially as deprecated. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1525446790-16139-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-07vl: allow 'maxmem' without 'slot'David Hildenbrand
We will be able to have memory devices (e.g. virtio) not requiring the slot parameter (e.g. not exposed via ACPI). We still need the maxmem parameter to setup a proper memory region for device memory. And some architectures (e.g. s390x) will have to set up the maximum possible guest address space size based on the maxmem parameter. As far as I can see, all code (pc.c,spapr.c,ACPI code) should handle !slots just fine, even though maxmem is set. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180423165126.15441-12-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-04-30hw/s390x: Allow to configure the consoles with the "-serial" parameterThomas Huth
The consoles ("sclpconsole" and "sclplmconsole") can only be configured with "-device" and "-chardev" so far. Other machines use the convenience option "-serial" to configure the default consoles, even for virtual consoles like spapr-vty on the pseries machine. So let's support this option on s390x, too. This way we can easily enable the serial console here again with "-nodefaults", for example: qemu-system-s390x -no-shutdown -nographic -nodefaults -serial mon:stdio ... which is way shorter than typing: qemu-system-s390x -no-shutdown -nographic -nodefaults \ -chardev stdio,id=c1,mux=on -device sclpconsole,chardev=c1 \ -mon chardev=c1 The -serial parameter can also be used if you only want to see the QEMU monitor on stdio without using -nodefaults, but not the console output. That's something that is pretty impossible with the current code today: qemu-system-s390x -no-shutdown -nographic -serial none While we're at it, this patch also maps the second -serial option to the "sclplmconsole", so that there is now an easy way to configure this second console on s390x, too, for example: qemu-system-s390x -no-shutdown -nographic -serial null -serial mon:stdio Additionally, the new code is also smaller than the old one and we have less s390x-specific code in vl.c :-) I've also checked that migration still works as expected by migrating a guest with console output back and forth between a qemu-system-s390x that has this patch and an instance without this patch. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1524754794-28005-1-git-send-email-thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-04-27Merge remote-tracking branch 'remotes/kraxel/tags/ui-20180427-pull-request' ↵Peter Maydell
into staging vnc: fix use-after-free. sdl2: gles support. vfio-display: add reset support. # gpg: Signature made Fri 27 Apr 2018 10:54:17 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20180427-pull-request: ui: introduce vfio_display_reset console: introduce dpy_gfx_update_full sdl: Allow OpenGL ES context creation sdl: Move DisplayOptions global to sdl2_console qapi: Parameter gl of DisplayType now accept an enum vnc: fix use-after-free Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-27sdl: Allow OpenGL ES context creationElie Tournier
Signed-off-by: Elie Tournier <elie.tournier@collabora.com> Message-id: 20180413135842.21325-4-tournier.elie@gmail.com [ kraxel: fix indent ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-04-27qapi: Parameter gl of DisplayType now accept an enumElie Tournier
v2: Rebase on top of master v3: Fix the json format (Eric Blake) Fix a comparison issue (Gerd Hoffmann) Signed-off-by: Elie Tournier <elie.tournier@collabora.com> Message-id: 20180413135842.21325-2-tournier.elie@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-26 22:27:23 +0000