aboutsummaryrefslogtreecommitdiff
path: root/vl.c
AgeCommit message (Collapse)Author
2016-11-02vl: exit qemu on guest panic if -no-shutdown is not setChristian Borntraeger
For automated testing purposes it can be helpful to exit qemu (poweroff) when the guest panics. Make this the default unless -no-shutdown is specified. For internal-errors like errors from KVM_RUN the behaviour is not changed, in other words QEMU does not exit to allow debugging in the QEMU monitor. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1476775794-108012-1-git-send-email-borntraeger@de.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-31Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.8' ↵Peter Maydell
into staging Migration bits from the COLO project # gpg: Signature made Sun 30 Oct 2016 10:39:55 GMT # gpg: using RSA key 0xEB0B4DFC657EF670 # gpg: Good signature from "Amit Shah <amit@amitshah.net>" # gpg: aka "Amit Shah <amit@kernel.org>" # gpg: aka "Amit Shah <amitshah@gmx.net>" # Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337 2735 1E9A 3B5F 8540 83B6 # Subkey fingerprint: CC63 D332 AB8F 4617 4529 6534 EB0B 4DFC 657E F670 * remotes/amit-migration/tags/migration-for-2.8: MAINTAINERS: Add maintainer for COLO framework related files configure: Support enable/disable COLO feature docs: Add documentation for COLO feature COLO: Implement failover work for secondary VM COLO: Implement the process of failover for primary VM COLO: Introduce state to record failover process COLO: Add 'x-colo-lost-heartbeat' command to trigger failover COLO: Synchronize PVM's state to SVM periodically COLO: Add checkpoint-delay parameter for migrate-set-parameters COLO: Load VMState into QIOChannelBuffer before restore it COLO: Send PVM state to secondary side when do checkpoint COLO: Add a new RunState RUN_STATE_COLO COLO: Introduce checkpointing protocol COLO: Establish a new communicating path for COLO migration: Switch to COLO process after finishing loadvm migration: Enter into COLO mode after migration if COLO is enabled COLO: migrate COLO related info to secondary node migration: Introduce capability 'x-colo' to migration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-30COLO: Add a new RunState RUN_STATE_COLOzhanghailiang
Guest will enter this state when paused to save/restore VM state under COLO checkpoint. Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: migrate COLO related info to secondary nodezhanghailiang
We can determine whether or not VM in destination should go into COLO mode by referring to the info that was migrated. We skip this section if COLO is not enabled (i.e. migrate_set_capability colo off), so that, It doesn't break compatibility with migration no matter whether users configure the --enable-colo/disable-colo on the source/destination side or not; Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-28clean-up: removed duplicate #includesAnand J
Some files contain multiple #includes of the same header file. Removed most of those unnecessary duplicate entries using scripts/clean-includes. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Anand J <anand.indukala@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28monitor: deprecate 'default' optionMarc-André Lureau
This option does nothing since commit 06ac27f. Deprecate it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-27fdc: Move qdev properties to FloppyDriveKevin Wolf
This makes the FloppyDrive qdev object actually useful: Now that it has all properties that don't belong to the controller, you can actually use '-device floppy' and get a working result. Command line semantics is consistent with CD-ROM drives: By default you get a single empty floppy drive. You can override it with -drive and using the same index, but if you use -drive to add a floppy to a different index, you get both of them. However, as soon as you use any '-device floppy', even to a different slot, the default drive is disabled. Using '-device floppy' without specifying the unit will choose the first free slot on the controller. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1477386868-21826-4-git-send-email-kwolf@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2016-10-24cpu: Support a target CPU having a variable page sizePeter Maydell
Support target CPUs having a page size which isn't knownn at compile time. To use this, the CPU implementation should: * define TARGET_PAGE_BITS_VARY * not define TARGET_PAGE_BITS * define TARGET_PAGE_BITS_MIN to the smallest value it might possibly want for TARGET_PAGE_BITS * call set_preferred_target_page_bits() in its realize function to indicate the actual preferred target page size for the CPU (and report any error from it) In CONFIG_USER_ONLY, the CPU implementation should continue to define TARGET_PAGE_BITS appropriately for the guest OS page size. Machines which want to take advantage of having the page size something larger than TARGET_PAGE_BITS_MIN must set the MachineClass minimum_page_bits field to a value which they guarantee will be no greater than the preferred page size for any CPU they create. Note that changing the target page size by setting minimum_page_bits is a migration compatibility break for that machine. For debugging purposes, attempts to use TARGET_PAGE_SIZE before it has been finally confirmed will assert. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-24char: replace qemu_chr_claim/release with qemu_chr_fe_init/deinitMarc-André Lureau
Now that all front end use qemu_chr_fe_init(), we can move chardev claiming in init(), and add a function deinit() to release the chardev and cleanup handlers. The qemu_chr_fe_claim_no_fail() for property are gone, since the property will raise an error instead. In other cases, where there is already an error path, an error is raised instead. Finally, other cases are handled by &error_abort in qemu_chr_fe_init(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: remove init callbackMarc-André Lureau
The CharDriverState.init() callback is no longer set since commit a61ae7f88ce and thus unused. The only user, the malta FGPA display has been converted to use an event "opened" callback instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24Put the copyright information on a separate lineThomas Huth
The output string QEMU with "--version" is very long, it does not fit into a normal line of a terminal window anymore. By putting the copyright information on a separate line instead, the output looks much nicer. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1475661284-30153-1-git-send-email-thuth@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-18Merge remote-tracking branch 'remotes/ehabkost/tags/machine-pull-request' ↵Peter Maydell
into staging machine + memory backend queue, 2016-10-17 # gpg: Signature made Mon 17 Oct 2016 18:54:57 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-pull-request: hostmem-file: Register TYPE_MEMORY_BACKEND_FILE properties as class properties hostmem: Register TYPE_MEMORY_BACKEND properties as class properties pc: Register TYPE_PC_MACHINE properties as class properties machine: Register TYPE_MACHINE properties as class properties machine: Fix replacement of '_' by '-' in machine property names Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17hw/arm/boot: allow using a command line specified dtb without a kernelMichael Olbrich
When kernel and device tree are specified in the QEMU commandline, then this device tree may be modified e.g. to add virtio_mmio devices. With a bootloader e.g. on a flash device these extra devices are not available. With this change, the device tree can be specified at the QEMU commandline. The modified device tree made available to the bootloader with the same mechanism already supported by device trees fully generated by QEMU. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Message-id: 1473520054-402-1-git-send-email-m.olbrich@pengutronix.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17machine: Fix replacement of '_' by '-' in machine property namesMarkus Armbruster
machine_set_property() replaces '_' by '-' in the property name. Except it fails to replace an initial '_'. Screwed up in commit b0ddb8b. Reproducer: "-M pc,__foo_bar=true" produces "Property '._-foo-bar' not found". Error messages using a mangled name rather than the name the user actually wrote is user-hostile, but that's a different topic. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-12trace: provide mechanism for registering trace eventsDaniel P. Berrange
Remove the notion of there being a single global array of trace events, by introducing a method for registering groups of events. The module_call_init() needs to be invoked at the start of any program that wants to make use of the trace support. Currently this covers system emulators qemu-nbd, qemu-img and qemu-io. [Squashed the following fix from Daniel P. Berrange <berrange@redhat.com>: linux-user/bsd-user: initialize trace events subsystem The bsd-user/linux-user programs make use of the CPU emulation code and this now requires that the trace events subsystem is enabled, otherwise it'll crash trying to allocate an empty trace events bitmap for the CPU object. --Stefan] Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-10Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches # gpg: Signature made Mon 10 Oct 2016 12:33:14 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: dmg: Move libbz2 code to dmg-bz2.so module: Don't load the same module if requested multiple times scripts: Allow block module to not define BlockDriver block: Add qdev ID to DEVICE_TRAY_MOVED block-backend: Remember if attached device is non-qdev block: Add node name to BLOCK_IO_ERROR event block: Add bdrv_runtime_opts to query-command-line-options block: use aio_bh_schedule_oneshot async: add aio_bh_schedule_oneshot block: use bdrv_add_before_write_notifier Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-07block: Add bdrv_runtime_opts to query-command-line-optionsKevin Wolf
Recently we moved a few options from QemuOptsLists in blockdev.c to bdrv_runtime_opts in block.c in order to make them accissble using blockdev-add. However, this has the side effect that these options are missing from query-command-line-options now, and libvirt consequently disables the corresponding feature. This problem was reported as a regression for the 'discard' option, introduced in commit 818584a4. However, it is more general than that. Fix it by adding bdrv_runtime_opts to the list of QemuOptsLists that are returned in query-command-line-options. For the future, libvirt is advised to use QMP schema introspection for block device options. Reported-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Michal Privoznik <mprivozn@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-04qemu_kill_report: Report PID name tooMichal Privoznik
When qemu is being killed, its last words are: 2016-08-31T11:48:15.293587Z qemu-system-x86_64: terminating on signal 15 from pid 11180 That's nice, but what process is 11180? What if I told you we can do better: 2016-08-31T11:48:15.293587Z qemu-system-x86_64: terminating on signal 15 from pid 11180 (/usr/sbin/libvirtd) And that's exactly what this patch does. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <a2ba85a8e349a0ea9ee06424226197a03cd04bd3.1474987617.git.mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-29Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Wed 28 Sep 2016 22:30:45 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace: Document the execution mode of guest events trace: Add event "guest_cpu_reset" trace: Add event "guest_cpu_enter" trace: Properly initialize dynamic event states in hot-plugged vCPUs trace: move hw/virtio/virtio-balloon.c trace points into correct file trace: move hw/mem/pc-dimm.c trace points into correct file trace: move util/qemu-coroutine*.c trace points into correct file trace: move util/buffer.c trace points into correct file Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-28Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* thread-safe tb_flush (Fred, Alex, Sergey, me, Richard, Emilio,... :-) * license clarification for compiler.h (Felipe) * glib cflags improvement (Marc-André) * checkpatch silencing (Paolo) * SMRAM migration fix (Paolo) * Replay improvements (Pavel) * IOMMU notifier improvements (Peter) * IOAPIC now defaults to version 0x20 (Peter) # gpg: Signature made Tue 27 Sep 2016 10:57:40 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (28 commits) replay: allow replay stopping and restarting replay: vmstate for replay module replay: move internal data to the structure cpus-common: lock-free fast path for cpu_exec_start/end tcg: Make tb_flush() thread safe cpus-common: Introduce async_safe_run_on_cpu() cpus-common: simplify locking for start_exclusive/end_exclusive cpus-common: remove redundant call to exclusive_idle() cpus-common: always defer async_run_on_cpu work items docs: include formal model for TCG exclusive sections cpus-common: move exclusive work infrastructure from linux-user cpus-common: fix uninitialized variable use in run_on_cpu cpus-common: move CPU work item management to common code cpus-common: move CPU list management to common code linux-user: Add qemu_cpu_is_self() and qemu_cpu_kick() linux-user: Use QemuMutex and QemuCond cpus: Rename flush_queued_work() cpus: Move common code out of {async_, }run_on_cpu() cpus: pass CPUState to run_on_cpu helpers build-sys: put glib_cflags in QEMU_CFLAGS ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-28trace: Properly initialize dynamic event states in hot-plugged vCPUsLluís Vilanova
Every time a vCPU is hot-plugged, it will "inherit" its tracing state from the global state array. That is, if *any* existing vCPU has an event enabled, new vCPUs will have too. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 147428970768.15111.7664565956870423529.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-27replay: allow replay stopping and restartingPavel Dovgalyuk
This patch fixes bug with stopping and restarting replay through monitor. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20160926080815.6992.71818.stgit@PASHA-ISP> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-27cpus-common: move CPU list management to common codePaolo Bonzini
Add a mutex for the CPU list to system emulation, as it will be used to manage safe work. Abstract manipulation of the CPU list in new functions cpu_list_add and cpu_list_remove. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-27filter-rewriter: introduce filter-rewriter initializationZhang Chen
Filter-rewriter is a part of COLO project. It will rewrite some of secondary packet to make secondary guest's tcp connection established successfully. In this module we will rewrite tcp packet's ack to the secondary from primary,and rewrite tcp packet's seq to the primary from secondary. usage: colo secondary: -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 -object filter-rewriter,id=rew0,netdev=hn0,queue=all Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27colo-compare: introduce colo compare initializationZhang Chen
This a COLO net ascii figure: Primary qemu Secondary qemu +--------------------------------------------------------------+ +----------------------------------------------------------------+ | +----------------------------------------------------------+ | | +-----------------------------------------------------------+ | | | | | | | | | | | guest | | | | guest | | | | | | | | | | | +-------^--------------------------+-----------------------+ | | +---------------------+--------+----------------------------+ | | | | | | ^ | | | | | | | | | | | | +------------------------------------------------------+ | | | | |netfilter| | | | | | netfilter | | | | +----------+ +----------------------------+ | | | +-----------------------------------------------------------+ | | | | | | | out | | | | | | filter excute order | | | | | | +-----------------------------+ | | | | | | +-------------------> | | | | | | | | | | | | | | | | TCP | | | | +-----+--+-+ +-----v----+ +-----v----+ |pri +----+----+sec| | | | +------------+ +---+----+---v+rewriter++ +------------+ | | | | | | | | | | |in | |in | | | | | | | | | | | | | | | | filter | | filter | | filter +------> colo <------+ +--------> filter +--> adjust | adjust +--> filter | | | | | | mirror | |redirector| |redirector| | | compare | | | | | | redirector | | ack | seq | | redirector | | | | | | | | | | | | | | | | | | | | | | | | | | | | | +----^-----+ +----+-----+ +----------+ | +---------+ | | | | +------------+ +--------+--------------+ +---+--------+ | | | | | tx | rx rx | | | | | tx all | rx | | | | | | | | | | +-----------------------------------------------------------+ | | | | +--------------+ | | | | | | | | | filter excute order | | | | | | | | | | +----------------> | | | +--------------------------------------------------------+ | | +-----------------------------------------+ | | | | | | | | | +--------------------------------------------------------------+ +----------------------------------------------------------------+ |guest receive | guest send | | +--------+----------------------------v------------------------+ | | NOTE: filter direction is rx/tx/all | tap | rx:receive packets sent to the netdev | | tx:receive packets sent by the netdev +--------------------------------------------------------------+ In COLO-compare, we do packet comparing job. Packets coming from the primary char indev will be sent to outdev. Packets coming from the secondary char dev will be dropped after comparing. colo-comapre need two input chardev and one output chardev: primary_in=chardev1-id (source: primary send packet) secondary_in=chardev2-id (source: secondary send packet) outdev=chardev3-id usage: primary: -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown -device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66 -chardev socket,id=mirror0,host=3.3.3.3,port=9003,server,nowait -chardev socket,id=compare1,host=3.3.3.3,port=9004,server,nowait -chardev socket,id=compare0,host=3.3.3.3,port=9001,server,nowait -chardev socket,id=compare0-0,host=3.3.3.3,port=9001 -chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait -chardev socket,id=compare_out0,host=3.3.3.3,port=9005 -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0 -object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out -object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0 -object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0 secondary: -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown -device e1000,netdev=hn0,mac=52:a4:00:12:78:66 -chardev socket,id=red0,host=3.3.3.3,port=9003 -chardev socket,id=red1,host=3.3.3.3,port=9004 -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-23vl: Switch qemu_uuid to QemuUUIDFam Zheng
Update all qemu_uuid users as well, especially get rid of the duplicated low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API. Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to QemuUUID is done here too to keep everything in sync and avoid code churn. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
2016-09-23util: Add UUID APIFam Zheng
A number of different places across the code base use CONFIG_UUID. Some of them are soft dependency, some are not built if libuuid is not available, some come with dummy fallback, some throws runtime error. It is hard to maintain, and hard to reason for users. Since UUID is a simple standard with only a small number of operations, it is cleaner to have a central support in libqemuutil. This patch adds qemu_uuid_* functions that all uuid users in the code base can rely on. Except for qemu_uuid_generate which is new code, all other functions are just copy from existing fallbacks from other files. Note that qemu_uuid_parse is moved without updating the function signature to use QemuUUID, to keep this patch simple. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-Id: <1474432046-325-2-git-send-email-famz@redhat.com>
2016-09-20blockdev: prepare iSCSI block driver for dynamic loadingColin Lord
This commit moves the initialization of the QemuOptsList qemu_iscsi_opts struct out of block/iscsi.c in order to allow the iscsi module to be dynamically loaded. Signed-off-by: Colin Lord <clord@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1471008424-16465-2-git-send-email-clord@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-09-19monitor: use qmp_find_command() (using generated qapi code)Marc-André Lureau
Stop using the so-called 'middle' mode. Instead, use qmp_find_command() from generated qapi commands registry. Update and fix the documentation too. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160912091913.15831-10-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-13Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into ↵Peter Maydell
staging trivial patches for 2016-09-13 # gpg: Signature made Tue 13 Sep 2016 16:53:11 BST # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * remotes/mjt/tags/trivial-patches-fetch: hw/net/e1000e: Fix compiler warning target-m68k: fix get_mac_extf helper timer/cpus: fix some typos and update some comments timer.h: fix inconsistency between comment and function prototype timer.h: fix typo maint: Ignore generated version file Document that curses usually needs -k option too trace-event: display "%d" instead of "0x%d" linux-user, trivial: display "0x%x" instead of "0x%d" pic: fix typo in error message: KVM_GET_IRQCHIP -> KVM_SET_IRQCHIP sparc: Use g_memdup() instead of g_new0() + memcpy() vl: remove unnecessary duplicate call to tpm_cleanup arm: spelling fix: mismatch hw/dma/omap: spelling fix: endianness hw/bt/hci: spelling fix: endianness docs: Fix description of the leaky bucket algorithm in throttle.txt Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-13vl: remove unnecessary duplicate call to tpm_cleanupPaolo Bonzini
tpm_cleanup is called from main() and also registered with atexit from tpm_init. The function only visits the tpm_backends linked list, and the atexit registration happens right after tpm_init fills in the list from -tpmdev options. Therefore, the direct call is unnecessary. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-13iothread: Stop threads before main() quitsFam Zheng
Right after main_loop ends, we release various things but keep iothread alive. The latter is not prepared to the sudden change of resources. Specifically, after bdrv_close_all(), virtio-scsi dataplane get a surprise at the empty BlockBackend: (gdb) bt at /usr/src/debug/qemu-2.6.0/hw/scsi/virtio-scsi.c:543 at /usr/src/debug/qemu-2.6.0/hw/scsi/virtio-scsi.c:577 It is because the d->conf.blk->root is set to NULL, then blk_get_aio_context() returns qemu_aio_context, whereas s->ctx is still pointing to the iothread: hw/scsi/virtio-scsi.c:543: if (s->dataplane_started) { assert(blk_get_aio_context(d->conf.blk) == s->ctx); } To fix this, let's stop iothreads before doing bdrv_close_all(). Cc: qemu-stable@nongnu.org Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1473326931-9699-1-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-05vl: Delay initialization of memory backendsEduardo Habkost
Initialization of memory backends may take a while when prealloc=yes is used, depending on their size. Initializing memory backends before chardevs may delay the creation of monitor sockets, and trigger timeouts on management software that waits until the monitor socket is created by QEMU. See, for example, the bug report at: https://bugzilla.redhat.com/show_bug.cgi?id=1371211 In addition to that, allocating memory before calling configure_accelerator() breaks the tcg_enabled() checks at memory_region_init_*(). This patch fixes those problems by adding "memory-backend-*" classes to the delayed-initialization list. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-08-11Update ancient copyright string in -version outputPeter Maydell
Currently the -version command line argument prints a string ending with "Copyright (c) 2003-2008 Fabrice Bellard". This is now some eight years out of date; abstract it out of the several places that print the string and update it to: Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers to reflect the work by all the QEMU Project contributors over the last decade. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1470309276-5012-1-git-send-email-peter.maydell@linaro.org
2016-08-08audio: clean up before monitor clean upMarc-André Lureau
Since aa5cb7f5e, the chardevs are being cleaned up when leaving qemu, before the atexit() handlers. audio_cleanup() may use the monitor to notify of changes. For compatibility reasons, let's clean up audio before the monitor so it keeps emitting monitor events. The audio_atexit() function is made idempotent (so it can be called multiple times), and renamed to audio_cleanup(). Since coreaudio backend is using a 'isAtexit' code path, change it to check audio_is_cleaning_up() instead, so the path is taken during normal exit. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160801112343.29082-3-marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-08-08monitor: fix crash when leaving qemu with spice audioMarc-André Lureau
Since aa5cb7f5e, the chardevs are being cleaned up when leaving qemu. However, the monitor has still references to them, which may lead to crashes when running atexit() and trying to send monitor events: #0 0x00007fffdb18f6f5 in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:54 #1 0x00007fffdb1912fa in __GI_abort () at abort.c:89 #2 0x0000555555c263e7 in error_exit (err=22, msg=0x555555d47980 <__func__.13537> "qemu_mutex_lock") at util/qemu-thread-posix.c:39 #3 0x0000555555c26488 in qemu_mutex_lock (mutex=0x5555567a2420) at util/qemu-thread-posix.c:66 #4 0x00005555558c52db in qemu_chr_fe_write (s=0x5555567a2420, buf=0x55555740dc40 "{\"timestamp\": {\"seconds\": 1470041716, \"microseconds\": 989699}, \"event\": \"SPICE_DISCONNECTED\", \"data\": {\"server\": {\"port\": \"5900\", \"family\": \"ipv4\", \"host\": \"127.0.0.1\"}, \"client\": {\"port\": \"40272\", \"f"..., len=240) at qemu-char.c:280 #5 0x0000555555787cad in monitor_flush_locked (mon=0x5555567bd9e0) at /home/elmarco/src/qemu/monitor.c:311 #6 0x0000555555787e46 in monitor_puts (mon=0x5555567bd9e0, str=0x5555567a44ef "") at /home/elmarco/src/qemu/monitor.c:353 #7 0x00005555557880fe in monitor_json_emitter (mon=0x5555567bd9e0, data=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:401 #8 0x00005555557882d2 in monitor_qapi_event_emit (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:472 #9 0x000055555578838f in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0, errp=0x7fffffffca88) at /home/elmarco/src/qemu/monitor.c:497 #10 0x0000555555c15541 in qapi_event_send_spice_disconnected (server=0x5555571139d0, client=0x5555570d0db0, errp=0x5555566c0428 <error_abort>) at qapi-event.c:1038 #11 0x0000555555b11bc6 in channel_event (event=3, info=0x5555570d6c00) at ui/spice-core.c:248 #12 0x00007fffdcc9983a in adapter_channel_event (event=3, info=0x5555570d6c00) at reds.c:120 #13 0x00007fffdcc99a25 in reds_handle_channel_event (reds=0x5555567a9d60, event=3, info=0x5555570d6c00) at reds.c:324 #14 0x00007fffdcc7d4c4 in main_dispatcher_self_handle_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:175 #15 0x00007fffdcc7d5b1 in main_dispatcher_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:194 #16 0x00007fffdcca7674 in reds_stream_push_channel_event (s=0x5555570d9910, event=3) at reds-stream.c:354 #17 0x00007fffdcca749b in reds_stream_free (s=0x5555570d9910) at reds-stream.c:323 #18 0x00007fffdccb5dad in snd_disconnect_channel (channel=0x5555576a89a0) at sound.c:229 #19 0x00007fffdccb9e57 in snd_detach_common (worker=0x555557739720) at sound.c:1589 #20 0x00007fffdccb9f0e in snd_detach_playback (sin=0x5555569fe3f8) at sound.c:1602 #21 0x00007fffdcca3373 in spice_server_remove_interface (sin=0x5555569fe3f8) at reds.c:3387 #22 0x00005555558ff6e2 in line_out_fini (hw=0x5555569fe370) at audio/spiceaudio.c:152 #23 0x00005555558f909e in audio_atexit () at audio/audio.c:1754 #24 0x00007fffdb1941e8 in __run_exit_handlers (status=0, listp=0x7fffdb5175d8 <__exit_funcs>, run_list_atexit=run_list_atexit@entry=true) at exit.c:82 #25 0x00007fffdb194235 in __GI_exit (status=<optimized out>) at exit.c:104 #26 0x00007fffdb17b738 in __libc_start_main (main=0x5555558d7874 <main>, argc=67, argv=0x7fffffffcf48, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffcf38) at ../csu/libc-start.c:323 Add a monitor_cleanup() functions to remove all the monitors before cleaning up the chardev. Note that we are "losing" some events that used to be sent during atexit(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160801112343.29082-2-marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-27vl: exit if a bad property value is passed to -globalGreg Kurz
When passing '-global driver=host-powerpc64-cpu,property=compat,value=foo' on the command line, without this patch, we get the following warning per device (which means many lines if the guests has many cpus): qemu-system-ppc64: Warning: can't apply global host-powerpc64-cpu.compat=foo: Invalid compatibility mode "foo" ... and QEMU continues execution, ignoring the property. With this patch, we get a single line: qemu-system-ppc64: can't apply global host-powerpc64-cpu.compat=foo: Invalid compatibility mode "foo" ... and QEMU exits. The previous behavior is kept for hotplugged devices since we don't want QEMU to exit when doing device_add. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-18trace: Add per-vCPU tracing states for events with the 'vcpu' propertyLluís Vilanova
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic tracing state of events with the 'vcpu' property. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-13char: do not use atexit cleanup handlerMarc-André Lureau
It turns out qemu is calling exit() in various places from various threads without taking much care of resources state. The atexit() cleanup handlers cannot easily destroy resources that are in use (by the same thread or other). Since c1111a24a3, TCG arm guests run into the following abort() when running tests, the chardev mutex is locked during the write, so qemu_mutex_destroy() returns an error: #0 0x00007fffdbb806f5 in raise () at /lib64/libc.so.6 #1 0x00007fffdbb822fa in abort () at /lib64/libc.so.6 #2 0x00005555557616fe in error_exit (err=<optimized out>, msg=msg@entry=0x555555c38c30 <__func__.14622> "qemu_mutex_destroy") at /home/drjones/code/qemu/util/qemu-thread-posix.c:39 #3 0x0000555555b0be20 in qemu_mutex_destroy (mutex=mutex@entry=0x5555566aa0e0) at /home/drjones/code/qemu/util/qemu-thread-posix.c:57 #4 0x00005555558aab00 in qemu_chr_free_common (chr=0x5555566aa0e0) at /home/drjones/code/qemu/qemu-char.c:4029 #5 0x00005555558b05f9 in qemu_chr_delete (chr=<optimized out>) at /home/drjones/code/qemu/qemu-char.c:4038 #6 0x00005555558b05f9 in qemu_chr_delete (chr=<optimized out>) at /home/drjones/code/qemu/qemu-char.c:4044 #7 0x00005555558b062c in qemu_chr_cleanup () at /home/drjones/code/qemu/qemu-char.c:4557 #8 0x00007fffdbb851e8 in __run_exit_handlers () at /lib64/libc.so.6 #9 0x00007fffdbb85235 in () at /lib64/libc.so.6 #10 0x00005555558d1b39 in testdev_write (testdev=0x5555566aa0a0) at /home/drjones/code/qemu/backends/testdev.c:71 #11 0x00005555558d1b39 in testdev_write (chr=<optimized out>, buf=0x7fffc343fd9a "", len=0) at /home/drjones/code/qemu/backends/testdev.c:95 #12 0x00005555558adced in qemu_chr_fe_write (s=0x5555566aa0e0, buf=buf@entry=0x7fffc343fd98 "0q", len=len@entry=2) at /home/drjones/code/qemu/qemu-char.c:282 Instead of using a atexit() handler, only run the chardev cleanup as initially proposed at the end of main(), where there are less chances (hic) of conflicts or other races. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reported-by: Andrew Jones <drjones@redhat.com> Message-Id: <20160704153823.16879-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-13net: do not use atexit for cleanupPaolo Bonzini
This will be necessary in the next patch, which stops using atexit for character devices; without it, vhost-user and the redirector filter will cause a use-after-free. Relying on the ordering of atexit calls is also brittle, even now that both the network and chardev subsystems are using atexit. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-07machine: Add machine_register_compat_props() functionEduardo Habkost
Move the compat_props handling to core machine code. Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-07qdev: Eliminate qemu_add_globals() functionEduardo Habkost
The function is just a helper to handle the -global options, it can stay in vl.c like most qemu_opts_foreach() calls. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-04hw/pci: delay bus_master_enable_region initializationMarcel Apfelbaum
Skip bus_master_enable region creation on PCI device init in order to be sure the IOMMU device (if present) would be created in advance. Add this memory region at machine_done time. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-29Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* serial port fixes (Paolo) * Q35 modeling improvements (Paolo, Vasily) * chardev cleanup improvements (Marc-André) * iscsi bugfix (Peter L.) * cpu_exec patch from multi-arch patches (Peter C.) * pci-assign tweak (Lin Ma) # gpg: Signature made Wed 29 Jun 2016 15:56:30 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) socket: unlink unix socket on remove socket: add listen feature char: clean up remaining chardevs when leaving vhost-user: disable chardev handlers on close vhost-user-test: fix g_cond_wait_until compat implementation vl: smp_parse: fix regression ich9: implement SCI_IRQ_SEL register ich9: implement ACPI_EN register serial: reinstate watch after migration serial: remove watch on reset char: change qemu_chr_fe_add_watch to return unsigned serial: separate serial_xmit and serial_watch_cb serial: simplify tsr_retry reset serial: make tsr_retry unsigned iscsi: fix assertion in is_sector_request_lun_aligned target-*: Don't redefine cpu_exec() pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.c vnc: generalize "VNC server running on ..." message scsi: esp: fix migration MC146818 RTC: add GPIO access to output IRQ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-29vl: smp_parse: fix regressionAndrew Jones
Commit 0544edd88a "vl: smp_parse: cleanups" regressed any -smp config that left either cores or threads unspecified, and specified a topology supporting more cpus than the given online cpus. The correct way to calculate the missing parameter would be to use maxcpus, but it's too late to change that now. Restore the old way, which is to calculate it with the online cpus (as is still done), but then, if the result is zero, just set it to one. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <1466526844-29245-1-git-send-email-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29vnc: generalize "VNC server running on ..." messagePaolo Bonzini
The message is useful whenever the user specifies "-vnc to=XX". Move it to ui/vnc.c. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-28trace: move qemu_trace_opts to trace/control.cDenis V. Lunev
The patch also creates trace_opt_parse() helper in trace/control.c to reuse this code in next patches for qemu-nbd and qemu-io. The patch also makes trace_init_events() static, as this call is not used outside the module anymore. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1466174654-30130-4-git-send-email-den@openvz.org CC: Paolo Bonzini <pbonzini@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-27qapi: Report support for -device cpu hotplug in query-machinesPeter Krempa
For management apps it's very useful to know whether the selected machine type supports cpu hotplug via the new -device approach. Using the presence of 'query-hotpluggable-cpus' alone is not enough as a witness. Add a property to 'MachineInfo' called 'hotpluggable-cpus' that will report the presence of this feature. Example of output: { "hotpluggable-cpus": false, "name": "mac99", "cpu-max": 1 }, { "hotpluggable-cpus": true, "name": "pseries-2.7", "is-default": true, "cpu-max": 255, "alias": "pseries" }, Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-20log: Fix qemu_set_log_filename() error handlingMarkus Armbruster
When qemu_set_log_filename() detects an invalid file name, it reports an error, closes the log file (if any), and starts logging to stderr (unless daemonized or nothing is being logged). This is wrong. Asking for an invalid log file on the command line should be fatal. Asking for one in the monitor should fail without messing up an existing logfile. Fix by converting qemu_set_log_filename() to Error. Pass it &error_fatal, except for hmp_logfile report errors. This also permits testing without a subprocess, so do that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1466011636-6112-4-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-06-20log: Fix qemu_set_dfilter_ranges() error reportingMarkus Armbruster
g_error() is not an acceptable way to report errors to the user: $ qemu-system-x86_64 -dfilter 1000+0 ** (process:17187): ERROR **: Failed to parse range in: 1000+0 Trace/breakpoint trap (core dumped) g_assert() isn't, either: $ qemu-system-x86_64 -dfilter 1000x+64 ** ERROR:/work/armbru/qemu/util/log.c:180:qemu_set_dfilter_ranges: assertion failed: (e == range_op) Aborted (core dumped) Convert qemu_set_dfilter_ranges() to Error. Rework its deeply nested control flow. Touch up the error messages. Call it with &error_fatal. This also permits testing without a subprocess, so do that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1466011636-6112-3-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-05 00:49:02 +0000