aboutsummaryrefslogtreecommitdiff
path: root/vl.c
AgeCommit message (Collapse)Author
2016-08-04vl: change runstate only if new state is different from current stateLi Zhijian
Previously, qemu will abort at following scenario: (qemu) stop (qemu) system_reset (qemu) system_reset (qemu) 2016-04-13T20:54:38.979158Z qemu-system-x86_64: invalid runstate transition: 'prelaunch' -> 'prelaunch' Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1460604352-18630-1-git-send-email-lizhijian@cn.fujitsu.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit e92a2d9cb3d8f589c9fe5d2eacc83d8dddea0e16) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-04-28qom: -object error messages lost location, restore itMarkus Armbruster
qemu_opts_foreach() runs its callback with the error location set to the option's location. Any errors the callback reports use the option's location automatically. Commit 90998d5 moved the actual error reporting from "inside" qemu_opts_foreach() to after it. Here's a typical hunk: if (qemu_opts_foreach(qemu_find_opts("object"), - object_create, - object_create_initial, NULL)) { + user_creatable_add_opts_foreach, + object_create_initial, &err)) { + error_report_err(err); exit(1); } Before, object_create() reports from within qemu_opts_foreach(), using the option's location. Afterwards, we do it after qemu_opts_foreach(), using whatever location happens to be current there. Commonly a "none" location. This is because Error objects don't have location information. Problematic. Reproducer: $ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar qemu-system-x86_64: Property '.foo' not found Note no location. This commit restores it: qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found Note that the qemu_opts_foreach() bug just fixed could mask the bug here: if the location it leaves dangling hasn't been clobbered, yet, it's the correct one. Reported-by: Eric Blake <eblake@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Paragraph on Error added to commit message]
2016-04-07Sort the fw_cfg file listGerd Hoffmann
Entries are inserted in filename order instead of being appended to the end in case sorting is enabled. This will avoid any future issues of moving the file creation around, it doesn't matter what order they are created now, the will always be in filename order. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Added machine type handling for compatibility. This was a fairly complex change, this will preserve the order of fw_cfg for older versions no matter what order the firmware files actually come in. A list is kept of the correct legacy order and the entries will be inserted based upon their order in the list. Except that some entries are ordered (in a specific area of the list) based upon what order they appear on the command line. Special handling is added for those entries. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-05vl: Move cpu_synchronize_all_states() into qemu_system_reset()David Gibson
There are currently 3 calls to qemu_system_reset() in vl.c. Two of them are immediately preceded by a cpu_synchronize_all_states9) and the remaining one should be. The one which doesn't is the very first reset called directly from main(). Without a cpu_synchronize_all_states(), kvm_vcpu_dirty is false at this point from the earlier cpu_synchronize_all_post_init(). That's incorrect because the reset path is quite likely to update the CPU state, and that updated state should be pushed back to KVM, not overwritten with stale data pushed to KVM immediately after init. This patch moves the call to cpu_synchronize_all_states() into qemu_system_reset() for safety, so it is always called. AFAICT this should be safe for the handful of callers outside vl.c - these all appear to be in places where the cpu state is already synchronized so the extra call will be a no-op. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Laurent Vivier <lvivier@redhat.com>
2016-03-30net/filter-mirror: implement filter-redirectorZhang Chen
Filter-redirector is a netfilter plugin. It gives qemu the ability to redirect net packet. redirector can redirect filter's net packet to outdev. and redirect indev's packet to filter. filter + redirector | +--------------+ | | | indev +-----------+ +----------> outdev | | | +--------------+ | v filter usage: -netdev user,id=hn0 -chardev socket,id=s0,host=ip_primary,port=X,server,nowait -chardev socket,id=s1,host=ip_primary,port=Y,server,nowait -filter-redirector,id=r0,netdev=hn0,queue=tx/rx/all,indev=s0,outdev=s1 Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-30net/filter-mirror:Add filter-mirrorZhang Chen
Filter-mirror is a netfilter plugin. It gives qemu the ability to mirror packets to a chardev. usage: -netdev tap,id=hn0 -chardev socket,id=mirror0,host=ip_primary,port=X,server,nowait -filter-mirror,id=m0,netdev=hn0,queue=tx/rx/all,outdev=mirror0 Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-24Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Log filtering from Alex and Peter * Chardev fix from Marc-André * config.status tweak from David * Header file tweaks from Markus, myself and Veronia (Outreachy candidate) * get_ticks_per_sec() removal from Rutuja (Outreachy candidate) * Coverity fix from myself * PKE implementation from myself, based on rth's XSAVE support # gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (28 commits) target-i386: implement PKE for TCG config.status: Pass extra parameters char: translate from QIOChannel error to errno exec: fix error handling in file_ram_alloc cputlb: modernise the debug support qemu-log: support simple pid substitution for logs target-arm: dfilter support for in_asm qemu-log: dfilter-ise exec, out_asm, op and opt_op qemu-log: new option -dfilter to limit output qemu-log: Improve the "exec" TB execution logging qemu-log: Avoid function call for disabled qemu_log_mask logging qemu-log: correct help text for -d cpu tcg: pass down TranslationBlock to tcg_code_gen util: move declarations out of qemu-common.h Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND hw: explicitly include qemu-common.h and cpu.h include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h Move ParallelIOArg from qemu-common.h to sysemu/char.h Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: scripts/clean-includes
2016-03-24input-linux: switch over to -objectGerd Hoffmann
This patches makes input-linux use -object instead of a new command line switch. So, instead of the switch ... -input-linux /dev/input/event$nr ... you must create an object this way: -object input-linux,id=$name,evdev=/dev/input/event$nr Bonus is that you can hot-add and hot-remove them via monitor now. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1457681901-30916-1-git-send-email-kraxel@redhat.com
2016-03-22qemu-log: new option -dfilter to limit outputAlex Bennée
When debugging big programs or system emulation sometimes you want both the verbosity of cpu,exec et all but don't want to generate lots of logs for unneeded stuff. This patch adds a new option -dfilter which allows you to specify interesting address ranges in the form: -dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,... Then logging code can use the new qemu_log_in_addr_range() function to decide if it will output logging information for the given range. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <1458052224-9316-7-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-16module: Rename machine_init() to opts_init()Eduardo Habkost
The only remaining users of machine_init() only call qemu_add_opts(). Rename machine_init() to opts_init() and move it closer to the qemu_add_opts() calls on vl.c. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-03-08input: linux evdev supportGerd Hoffmann
This patch adds support for reading input events directly from linux evdev devices and forward them to the guest. Unlike virtio-input-host which simply passes on all events to the guest without looking at them this will interpret the events and feed them into the qemu input subsystem. Therefore this is limited to what the qemu input subsystem and the emulated input devices are able to handle. Also there is no support for absolute coordinates (tablet/touchscreen). So we are talking here about basic mouse and keyboard support. The advantage is that it'll work without virtio-input drivers in the guest, the events are delivered to the usual ps/2 or usb input devices (depending on what the machine happens to have). And for keyboards qemu is able to switch the keyboard between guest and host on hotkey. The hotkey is hard-coded for now (both control keys), initialy the guest owns the keyboard. Probably most useful when assigning vga devices with vfio and using a physical monitor instead of vnc/spice/gtk as guest display. Usage: Add '-input-linux /dev/input/event<nr>' to the qemu command line. Note that udev has rules which populate /dev/input/by-{id,path} with static names, which might be more convinient to use. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1457087116-4379-2-git-send-email-kraxel@redhat.com
2016-03-01vl: fix tracing initializationDenis V. Lunev
we should call trace_init_backends() before trace_init_file() for CONFIG_TRACE_SIMPLE There is no difference for other cases. This problem was introduced by the commit commit 41fc57e44ed64cd4ab5393d83624afd897dabd4f Author: Paolo Bonzini <pbonzini@redhat.com> Date: Thu Jan 7 16:55:24 2016 +0300 trace: split trace_init_file out of trace_init_backends 'make check' was failed as a result if configured with --enable-trace-backends=simple Spotted by Alex Bennée. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1455036545-14870-1-git-send-email-den@openvz.org CC: Alex Bennée <alex.bennee@linaro.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-19vl: Clean up machine selection in main().Markus Armbruster
We set machine_class to the default first, and update it to the real one later. Any use of machine_class in between is almost certainly wrong (there are no such uses right now). Set it once and for all instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-19vl: Set error location when parsing memory optionsEduardo Habkost
Set error location so the error_report() calls will show appropriate command-line argument or config file info. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1455303747-19776-5-git-send-email-ehabkost@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-19vl: Reset location after handling command-line argumentsEduardo Habkost
After looping through all command-line arguments, error location info becomes obsolete, and any function calling error_report() will print misleading information. This breaks error reporting for some option handling, like: $ qemu-system-x86_64 -icount rr=x -vnc :0 qemu-system-x86_64: -vnc :0: Invalid icount rr option: x $ qemu-system-x86_64 -m size= -vnc :0 qemu-system-x86_64: -vnc :0: missing 'size' option value Fix this by resetting location info as soon as we exit the command-line handling loop. With this, replay_configure() and set_memory_options() won't print any location info yet, but at least they won't print incorrect information. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1455303747-19776-3-git-send-email-ehabkost@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> ["Do not insert code here" comment added to prevent regressions] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-19vl.c: Fix regression in machine error messageMarcel Apfelbaum
Commit e1ce0c3cb (vl.c: fix regression when reading machine type from config file) fixed the error message when the machine type was supplied inside the config file. However now the option name is not displayed correctly if the error happens when the machine is specified at command line. Running ./x86_64-softmmu/qemu-system-x86_64 -M q35-1.5 -redir tcp:8022::22 will result in the error message: qemu-system-x86_64: -redir tcp:8022::22: unsupported machine type Use -machine help to list supported machines Fixed it by restoring the error location and also extracted the code dealing with machine options into a separate function. Reported-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1455303747-19776-2-git-send-email-ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-16qom: add helpers for UserCreatable object typesDaniel P. Berrange
The QMP monitor code has two helper methods object_add and qmp_object_del that are called from several places in the code (QMP, HMP and main emulator startup). The HMP and main emulator startup code also share further logic that extracts the qom-type & id values from a qdict. We soon need to use this logic from qemu-img, qemu-io and qemu-nbd too, but don't want those to depend on the monitor, nor do we want to duplicate the code. To avoid this, move some code out of qmp.c and hmp.c adding new methods to qom/object_interfaces.c - user_creatable_add - takes a QDict holding a full object definition & instantiates it - user_creatable_add_type - takes an ID, type name, and QDict holding object properties & instantiates it - user_creatable_add_opts - takes a QemuOpts holding a full object definition & instantiates it - user_creatable_add_opts_foreach - variant on user_creatable_add_opts which can be directly used in conjunction with qemu_opts_foreach. - user_creatable_del - takes an ID and deletes the corresponding object The existing code is updated to use these new methods. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16vl: fix migration from prelaunch statePaolo Bonzini
Reproducer is simply to migrate a virtual machine that was started with -S, or that was already migrated. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16vl: change QEMU state machine for system resetDenis V. Lunev
This patch implements proposal from Paolo to handle system reset when the guest is not running. "After a reset, main_loop_should_exit should actually transition to VM_STATE_PRELAUNCH (*not* RUN_STATE_PAUSED) for *all* states except RUN_STATE_INMIGRATE, RUN_STATE_SAVE_VM (which I think cannot happen there) and (of course) RUN_STATE_RUNNING." Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1455369986-20353-1-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2016-02-09' ↵Peter Maydell
into staging Error reporting patches for 2016-02-09 # gpg: Signature made Tue 09 Feb 2016 12:38:33 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2016-02-09: HACKING: Add a section on error handling and reporting error: Improve documentation some more Use error_fatal to simplify obvious fatal errors (again) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-08qapi: Drop unused 'kind' for struct/enum visitEric Blake
visit_start_struct() and visit_type_enum() had a 'kind' argument that was usually set to either the stringized version of the corresponding qapi type name, or to NULL (although some clients didn't even get that right). But nothing ever used the argument. It's even hard to argue that it would be useful in a debugger, as a stack backtrace also tells which type is being visited. Therefore, drop the 'kind' argument as dead. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-22-git-send-email-eblake@redhat.com> [Harmless rebase mistake cleaned up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08vl: Ensure qapi visitor properly ends struct visitEric Blake
Guarantee that visit_end_struct() is called if visit_start_struct() succeeded. This matches the behavior of most other uses of visitors, and is a step towards the possibility of a future patch that adds and enforces some tighter semantics to the visitor interface (namely, cleanup of the visitor would no longer have to mop up as many leftovers from an aborted partial visit). The change to code here matches the flow of hmp.c:hmp_object_add(); a later patch will then further simplify the cleanup logic of both places by refactoring visit_end_struct() to not require a second local error object. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-9-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08hmp: Cache use of qapi visitorEric Blake
Cache the visitor in a local variable instead of repeatedly calling the accessor. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-8-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08hmp: Drop pointless allocation during qapi visitEric Blake
The qapi visitor contract allows us to visit a virtual structure, where we don't have any corresponding qapi struct. Most such uses pass NULL for @obj; but these two callers were passing a dummy pointer, which then gets allocated to heap memory but then immediately freed without use. Clean this up to suppress unwanted allocation, like we do elsewhere. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-7-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08Use error_fatal to simplify obvious fatal errors (again)Markus Armbruster
Done with the Coccinelle semantic patch from commit 007b065, plus manual clean up of dead variables. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1452783732-6581-1-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-04all: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-02-04Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Thu 04 Feb 2016 08:26:24 GMT using RSA key ID 398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: net/filter: Fix the output information for command 'info network' net: always walk through filters in reverse if traffic is egress net: netmap: use nm_open() to open netmap ports e1000: eliminate infinite loops on out-of-bounds transfer start slirp: Adding family argument to tcp_fconnect() slirp: Make udp_attach IPv6 compatible slirp: Add sockaddr_equal, make solookup family-agnostic slirp: Factorizing and cleaning solookup() slirp: Factorizing address translation slirp: Make Socket structure IPv6 compatible slirp: Adding address family switch for produced frames slirp: Generalizing and neutralizing ARP code slirp: goto bad in udp_input if sosendto fails cadence_gem: fix buffer overflow net: cadence_gem: check packet size in gem_recieve qemu-doc: Do not promote deprecated -smb and -redir options net/slirp: Tell the users when they are using deprecated options Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-04net/slirp: Tell the users when they are using deprecated optionsThomas Huth
We don't want to support the legacy -tftp, -bootp, -smb and -net channel options forever. So let's start telling the users that they are deprecated and what option should be used instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-03trace: convert stderr backend to logPaolo Bonzini
[Also update .travis.yml --enable-trace-backends=stderr --Stefan] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-10-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-03trace: add "-trace enable=..."Paolo Bonzini
Allow enabling events without going through a file, for example: qemu-system-x86_64 -trace bdrv_aio_writev -trace bdrv_aio_readv or with globbing too: qemu-system-x86_64 -trace 'bdrv_aio_*' if an appropriate backend is enabled (simple, stderr, ftrace). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-6-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-03trace: no need to call trace_backend_init in different branches nowDenis V. Lunev
original idea to split calling locations was to spawn tracing thread in the final child process according to commit 8a745f2a9296ad2cf6bda33534ed298f2625a4ad Author: Michael Mueller Date: Mon Sep 23 16:36:54 2013 +0200 os_daemonize is now on top of both locations. Drop unneeded ifs. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1452174932-28657-5-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-03trace: split trace_init_file out of trace_init_backendsPaolo Bonzini
This is cleaner, and improves error reporting with -daemonize. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-4-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-03trace: split trace_init_events out of trace_init_backendsPaolo Bonzini
This is cleaner and has two advantages. First, it improves error reporting with -daemonize. Second, multiple "-trace events" options now cumulate. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-3-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-18qom: Change object property iterator API contractDaniel P. Berrange
Currently the ObjectProperty iterator API works as follows: ObjectPropertyIterator *iter; iter = object_property_iter_init(obj); while ((prop = object_property_iter_next(iter))) { ... } object_property_iter_free(iter); This has the benefit that the ObjectPropertyIterator struct can be opaque, but has the downside that callers need to explicitly call a free function. It is also not in keeping with iterator style used elsewhere in QEMU/GLib2. This patch changes the API to use stack allocation instead: ObjectPropertyIterator iter; object_property_iter_init(&iter, obj); while ((prop = object_property_iter_next(&iter))) { ... } Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [AF: Fused ObjectPropertyIterator struct with typedef] Signed-off-by: Andreas Färber <afaerber@suse.de>
2016-01-14Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2016-01-13' ↵Peter Maydell
into staging Error reporting patches for 2016-01-13 # gpg: Signature made Wed 13 Jan 2016 14:21:48 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2016-01-13: (41 commits) checkpatch: Detect newlines in error_report and other error functions error: Consistently name Error * objects err, and not errp s390/sclp: Simplify control flow in sclp_realize() hw/s390x: Rename local variables Error *l_err to just err error: Clean up errors with embedded newlines (again) vhdx: Fix "log that needs to be replayed" error message pci-assign: Clean up "Failed to assign" error messages vmdk: Clean up "Invalid extent lines" error message vmdk: Clean up control flow in vmdk_parse_extents() a bit error: Strip trailing '\n' from error string arguments (again) qemu-io qemu-nbd: Use error_report() etc. instead of fprintf() migration: Use error_reportf_err() instead of monitor_printf() spapr: Use error_reportf_err() error: Use error_prepend() where it makes obvious sense error: Use error_reportf_err() where it makes obvious sense error: Don't decorate original error message when adding to it error: New error_prepend(), error_reportf_err() test-throttle: Simplify qemu_init_main_loop() error handling qemu-nbd: Clean up "Failed to load snapshot" error message block: Clean up "Could not create temporary overlay" error message ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-13error: Use error_reportf_err() where it makes obvious senseMarkus Armbruster
Done with this Coccinelle semantic patch @@ expression FMT, E, S; expression list ARGS; @@ - error_report(FMT, ARGS, error_get_pretty(E)); + error_reportf_err(E, FMT/*@@@*/, ARGS); ( - error_free(E); | exit(S); | abort(); ) followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping, because I can't figure out how to make Coccinelle transform strings. We now use the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I can't see how the errors touched in this commit could come with hints. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13error: Use error_report_err() where appropriate (again)Markus Armbruster
Same Coccinelle semantic patch as in commit 565f65d. We now use the original error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I don't think the errors touched in this commit can come with hints. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-3-git-send-email-armbru@redhat.com>
2016-01-13Use error_fatal to simplify obvious fatal errorsMarkus Armbruster
Done with this Coccinelle semantic patch: @@ type T; identifier FUN, RET; expression list ARGS; expression ERR, EC; @@ ( - T RET = FUN(ARGS, &ERR); + T RET = FUN(ARGS, &error_fatal); | - RET = FUN(ARGS, &ERR); + RET = FUN(ARGS, &error_fatal); | - FUN(ARGS, &ERR); + FUN(ARGS, &error_fatal); ) - if (ERR != NULL) { - error_report_err(ERR); - exit(EC); - } This is actually a more elegant version of my initial semantic patch by courtesy of Eduardo. It leaves dead Error * variables behind, cleaned up manually. Cc: qemu-arm@nongnu.org Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-01-13s390x: remove s390-virtio devicesPierre Morel
The s390-virtio machine has been removed; remove the associated devices as well. hw/s390x/s390-virtio-bus.c and hw/s390x/s390-virtio-bus.h have been deleted and removed from hw/s390x/Makefile.objs virtio-size has no more meaning for the modern machine and has been removed from helper.c and cpu.h virtio-serial-s390 belonging to the old machine is being removed from vl.c Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-12-17qapi: Don't let implicit enum MAX member collideEric Blake
Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-26Revert "exec: silence hugetlbfs warning under qtest"Daniel P. Berrange
This reverts commit 1c7ba94a184df1eddd589d5400d879568d3e5d08. That commit changed QEMU initialization order from - object-initial, chardev, qtest, object-late to - chardev, qtest, object-initial, object-late This breaks chardev setups which need to rely on objects having been created. For example, when chardevs use TLS encryption in the future, they need to have tls credential objects created first. This revert, restores the ordering introduced in commit f08f9271bfe3f19a5eb3d7a2f48532065304d5c8 Author: Daniel P. Berrange <berrange@redhat.com> Date: Wed May 13 17:14:04 2015 +0100 vl: Create (most) objects before creating chardev backends Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1448448749-1332-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-19Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell
into staging QOM infrastructure fixes and device conversions * Fix for properties on objects > 4 GiB * Performance improvements for QOM property handling * Assertion cleanups * MAINTAINERS additions # gpg: Signature made Thu 19 Nov 2015 14:32:16 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: MAINTAINERS: Add check-qom-{interface,proplist} to QOM qom: Clean up assertions to display values on failure qom: Replace object property list with GHashTable qom: Add a test case for complex property finalization net: Convert net filter code to use object property iterators ppc: Convert spapr code to use object property iterators vl: Convert machine help code to use object property iterators qmp: Convert QMP code to use object property iterators qom: Introduce ObjectPropertyIterator struct for iteration qdev: Change Property::offset field to ptrdiff_t type Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-19exec: silence hugetlbfs warning under qtestMarc-André Lureau
vhost-user-test prints a warning. A test should not need to run on hugetlbfs, let's silence the warning under qtest. The condition can't check on qtest_enabled() since vhost-user-test actually doesn't use qtest accel. However, qtest_driver() can be used, if qtest_init() is called early enough. For that reason, move chardev and qtest initialization early. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-18vl: Convert machine help code to use object property iteratorsDaniel P. Berrange
Stop directly accessing the Object::properties field data structure and instead use the formal object property iterator APIs. This insulates the code from future data structure changes in the Object struct. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Tested-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-11-10Move page_size_init earlierDr. David Alan Gilbert
The HOST_PAGE_ALIGN macros don't work until the page size variables have been set up; later in postcopy I use those macros in the RAM code, and it can be triggered using -object. Fix this by initialising page_size_init() earlier - it's currently initialised inside the accelerators, move it up into vl.c. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-06Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-replay' into ↵Peter Maydell
staging So here it is, let's see what happens. # gpg: Signature made Fri 06 Nov 2015 09:30:34 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream-replay: replay: recording of the user input replay: command line options replay: replay blockers for devices replay: initialization and deinitialization replay: ptimer bottom halves: introduce bh call function replay: checkpoints icount: improve counting for record/replay replay: shutdown event replay: recording and replaying clock ticks replay: asynchronous events infrastructure replay: interrupts and exceptions cpu: replay instructions sequence cpu-exec: allow temporary disabling icount replay: introduce icount event replay: introduce mutex to protect the replay log replay: internal functions for replay log replay: global variables and function stubs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-06replay: command line optionsPavel Dovgalyuk
This patch introduces command line options for enabling recording or replaying virtual machine behavior. These options are added to icount command line parameter. They include 'rr' which switches between record and replay and 'rrfile' for specifying the filename for replay log. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162518.8676.70792.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2015-11-06replay: replay blockers for devicesPavel Dovgalyuk
Some devices are not supported by record/replay subsystem. This patch introduces replay blocker which denies starting record/replay if such devices are included into the configuration. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162512.8676.11367.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 12:38:06 +0000