aboutsummaryrefslogtreecommitdiff
path: root/ui
AgeCommit message (Collapse)Author
2012-02-01sdl: Limit sdl_grab_end in handle_activation to Windows hostsJan Kiszka
There are scenarios on Linux with some SDL versions where handle_activation is continuous invoked with state = SDL_APPINPUTFOCUS and gain = 0 while we grabbed the input. This causes a ping-pong when we grab the input after an absolute mouse entered the window. As this sdl_grab_end was once introduced to work around a Windows-only issue (0294ffb9c8), limit it to that platform. CC: Erik Rull <erik.rull@rdsoftware.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-01sdl: Grab input on end of non-absolute mouse clickJan Kiszka
By grabbing the input already on button down, we leave the button in that state for the host GUI. Thus it takes another click after releasing the input again to synchronize the mouse button state. Avoid this by grabbing on button up. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-01Revert "Handle SDL grabs failing (Mark McLoughlin)"Jan Kiszka
This reverts commit 6bb816031f8bc0aafc3476e6dfa4293ee3a5f106. SDL_WM_GrabInput does not reliably bail out if grabbing is impossible. So if we get here, we already lost and will block. But this can no longer happen due to the check in sdl_grab_start. So this patch became obsolete. Conflicts: sdl.c Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-01sdl: Fix block prevention of SDL_WM_GrabInputJan Kiszka
Consistently check for SDL_APPINPUTFOCUS before trying to grab the input focus. Just checking for SDL_APPACTIVE doesn't work. Moving the check to sdl_grab_start allows for some consolidation. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-01sdl: Do not grab mouse on mode switch while in backgroundJan Kiszka
When the mouse mode changes to absolute while the SDL windows is not in focus, refrain from grabbing the input. It would steal from some other window. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-18vnc: Simplify vnc_display_password()Luiz Capitulino
Drop the qerror_report() call from it and let its callers set the error themselves. This also allows for dropping the 'ret' variable. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-13vnc: fix no-lock-key-sync strncmp() lengthStefan Hajnoczi
The no-lock-key-sync option is being parsed incorrectly because of an outdated strcmp() length value. Use the correct length so that invalid option names do not match. Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-14Merge remote-tracking branch 'stefanha/trivial-patches-next' into stagingAnthony Liguori
2011-12-14Fix spelling in comments, documentation and messagesStefan Weil
accidently->accidentally annother->another choosen->chosen consideres->considers decriptor->descriptor developement->development paramter->parameter preceed->precede preceeding->preceding priviledge->privilege propogation->propagation substraction->subtraction throught->through upto->up to usefull->useful Fix also grammar in posix-aio-compat.c Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-12qemu-thread: add API for joinable threadsJan Kiszka
Split from Jan's original qemu-thread-posix.c patch. No semantic change, just introduce the new API that POSIX and Win32 implementations will conform to. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-06fix typo: delete redundant semicolonDong Xu Wang
Double semicolons should be single. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-02fix spelling in ui sub directoryDong Xu Wang
Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-11ui: Plug memory leaks on parse_keyboard_layout() error pathMarkus Armbruster
Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-10ui/vnc: Convert sasl.mechlist to g_malloc() & friendsMarkus Armbruster
Fixes protocol_client_auth_sasl_mechname() not to crash when malloc() fails. Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-01Merge remote-tracking branch 'afaerber/cocoa-for-upstream' into stagingAnthony Liguori
2011-11-01ui/vnc: Fix use of free() instead of g_free()Stefan Weil
Please note that mechlist still uses malloc / strdup / free. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01cocoa: Close sheet after image file selectionAndreas Färber
If no disk image is specified, the Cocoa frontend displays a modal sheet to let the user select an image file to boot from. This sheet is never closed and it permanently obscures the emulator window. Close it after obtaining the file name in case the user did select a file. Otherwise we exit immediately, so no need to close then. Signed-off-by: Juan Pineda <juan@logician.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2011-10-31Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori
Conflicts: ui/spice-core.c
2011-10-27qapi: Convert query-spiceLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-vncLuiz Capitulino
There are three important remarks in relation to the non-qapi command: 1. This commit also fixes the behavior of the 'query-vnc' and 'info vnc' commands to return an error when qemu is built without VNC support (ie. --disable-vnc). The non-qapi command would return the OK response in QMP and no response in HMP 2. The qapi version explicitly marks the fields 'host', 'family', 'service' and 'auth' as optional. Their are not documented as optional in the non-qapi command doc, but they would not be returned if vnc support is disabled. The qapi version maintains the same semantics, but documents those fields correctly 3. The 'clients' field, which is a list, is marked as optional but is always returned. If there are no clients connected an empty list is returned. This is not the Right Way to this in the qapi but it's how the non-qapi command used to work Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-25spice: fix file handle cleanupGerd Hoffmann
Setting both read and write handlers to NULL in qemu_set_fd_handler is not enougth to make qemu purge the file handle from the list. We must set opaque to NULL too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-25ui/spice-core: fix segfault in monitorAlon Levy
Fix segfault if a qxl device is present but no spice command line argument is given. RHBZ 743251. Signed-off-by: Alon Levy <alevy@redhat.com>
2011-10-25spice: Convert core to QEMU thread APIJan Kiszka
No need to use pthread directly, we have proper abstractions for identity checking. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-25spice: support the new migration interface (spice 0.8.3)Yonit Halperin
- call spice_server_migrate_(start|end|connect). - register spice_migrate_connect completion callback Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-25spice: turn client_migrate_info to asyncYonit Halperin
RHBZ 737921 Spice client is required to connect to the migration target before/as migration starts. Since after migration starts, the target qemu is blocked and cannot accept new spice client we trigger the connection to the target upon client_migrate_info command. client_migrate_info completion cb will be called after spice client has been connected to the target (or a timeout). See following patches and spice patches. Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-20migration: Export a function that tells if the migration has finished correctlyJuan Quintela
This will allow us to hide the state values. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-09-21use qemu_* ctype functionsChristoph Egger
Fix "warning: array subscript has type 'char'" on NetBSD. Signed-off-by: Christoph Egger <Christoph.Egger@amd.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21Drop unneeded pthread.h inclusionsJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-15Drop the vm_running global variableLuiz Capitulino
Use runstate_is_running() instead, which is introduced by this commit. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-09-15Replace the VMSTOP macros with a proper state typeLuiz Capitulino
Today, when notifying a VM state change with vm_state_notify(), we pass a VMSTOP macro as the 'reason' argument. This is not ideal because the VMSTOP macros tell why qemu stopped and not exactly what the current VM state is. One example to demonstrate this problem is that vm_start() calls vm_state_notify() with reason=0, which turns out to be VMSTOP_USER. This commit fixes that by replacing the VMSTOP macros with a proper state type called RunState. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-09-09vns/tls: don't use depricated gnutls functionsGerd Hoffmann
Avoid using deprecated gnutls functions with recent gnutls versions. Fixes build failure on Fedora 16. Keep the old way for compatibility with old installations such as RHEL-5 (gnutls 1.4.x). Based on a patch from Raghavendra D Prabhu <raghu.prabhu13@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-07spice: workaround a spice server bug.Gerd Hoffmann
spice server might call the channel_event callback from spice server thread context. Detect that and aquire iothread lock if needed,
2011-09-07spice: set qxl->ssd.running=true before telling spice to start, RHBZ #733993Yonit Halperin
If qxl->ssd.running=true is set after telling spice to start, the spice server thread can call qxl_send_events while qxl->ssd.running is still false. This leads to assert(d->ssd.running). Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-22sdl: Don't release input on mouse mode change in full-screen modeJan Kiszka
While in full-screen mode, the input focus naturally belongs to the SDL window. Avoid dropping it when switching from absolute to relative mouse mode. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-21Convert last qemu_free and qemu_malloc usesBlue Swirl
7267c0947d7e8ae5dff7bafd932c3bc285f43e5c missed a few cases, fix them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-10ui/spice-core: report compiled-version in info spice/query-spiceAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-05sdl: Refactor sdl_send_mouse_eventJan Kiszka
Replace width/height globals with the identical values from real_screen, refactor the function according to our coding style. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Factor out event handlers from sdl_refreshJan Kiszka
No functional changes. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Add zoom hot keysJan Kiszka
Allow to enlarge or shrink the screen via CTRL-ALT-+/-. In contrast to scaling the window, these controls always preserve the aspect ratio of the current console. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Dynamically grab input in absolute mouse modeJan Kiszka
Not grabbing the input means that special keys like ALT+TAB are still handled by the host. Improve the usability by grabbing input once the mouse is inside the guest screen, provided the SDL window has the input focus. Release it again when the mouse is moved to any border. Also grab the input when we gain the input focus and the mouse is within the screen limits. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Fix cursor handling when switching consoles in absolute mouse modeJan Kiszka
Restore the cursor when switching from graphic to text console while the mouse is in absolute mode. Disable it again when returning. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Never release input while in full screen modeJan Kiszka
It's confusing to suddenly find two mice in full screen mode when switching consoles or accidentally hitting the grab hot keys. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Consistently avoid grabbing input for text consolesJan Kiszka
There were some preexisting bits that released the input when switching to text console. This patch spreads this logic consistently and also avoids grabbing the input while a text console is active. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Initialize gui_fullscreen earlier during setupJan Kiszka
This ensures that we actually enter full screen on startup when e.g. '-vga none -full-screen' was specified. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Drop bogus gui_fullscreen_initial_grabJan Kiszka
There must be no difference between initial -full-screen and switching to this mode via the hot key. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Restore scaling mode on return from full screenJan Kiszka
Save the scaling mode and its geometry when going full screen, restore it when returning to windowed mode. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Fix full screen toggling from scaled modeJan Kiszka
When switching to full screen mode from a scaled window, we need to resize to DisplayState's dimension, not the scaled "real" screen size. Moreover, scaling mode may have manipulated the bpp. So we need to restore it from the DisplayState as well. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Properly mark modifier+u as hotkeyJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Avoid redundant scaling deactivationJan Kiszka
Prevents screen flickering. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-12 02:09:04 +0000