aboutsummaryrefslogtreecommitdiff
path: root/ui
AgeCommit message (Collapse)Author
2019-03-11vnc: allow specifying a custom authorization object nameDaniel P. Berrange
The VNC server has historically had support for ACLs to check both the SASL username and the TLS x509 distinguished name. The VNC server was responsible for creating the initial ACL, and the client app was then responsible for populating it with rules using the HMP 'acl_add' command. This is not satisfactory for a variety of reasons. There is no way to populate the ACLs from the command line, users are forced to use the HMP. With multiple network services all supporting TLS and ACLs now, it is desirable to be able to define a single ACL that is referenced by all services. To address these limitations, two new options are added to the VNC server CLI. The 'tls-authz' option takes the ID of a QAuthZ object to use for checking TLS x509 distinguished names, and the 'sasl-authz' option takes the ID of another object to use for checking SASL usernames. In this example, we setup two authorization rules. The first allows any client with a certificate issued by the 'RedHat' organization in the 'London' locality. The second ACL allows clients with either the 'joe@REDHAT.COM' or 'fred@REDHAT.COM' kerberos usernames. Both checks must pass for the user to be allowed. $QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-simple,id=authz0,policy=deny,\ rules.0.match=O=RedHat,,L=London,rules.0.policy=allow \ -object authz-simple,id=authz1,policy=deny,\ rules.0.match=fred@REDHAT.COM,rules.0.policy=allow \ rules.0.match=joe@REDHAT.COM,rules.0.policy=allow \ -vnc 0.0.0.0:1,tls-creds=tls0,tls-authz=authz0, sasl,sasl-authz=authz1 \ ...other QEMU args... Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20190227145755.26556-2-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11vnc: fix update stallsGerd Hoffmann
vnc aborts display update jobs on video mode switches and page flips. That can cause vnc update stalls in case an unfinished vnc job gets aborted. The vnc client will never receive the requested update then. Fix that by copying the state from job_update back to update in that case. Reports complain about stalls with two or more clients being connected at the same time, on some but not all connections. I suspect it can also happen with a single connection, multiple connections only make this more much likely to happen. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1662260 Reported-by: Ying Fang <fangying1@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ying Fang <fangying1@huawei.com> Message-id: 20190305130930.24516-1-kraxel@redhat.com
2019-03-11curses: support wide inputSamuel Thibault
This makes use of wide curses functions instead of 8bit functions. This allows to type e.g. accented letters. Unfortunately, key codes are then returned with values that could be confused with wide characters by ncurses, so we need to add a maybe_keycode variable to know whether the returned value is a key code or a character (curses with wide support), or possibly both (curses without wide support). The translation tables thus also need to be separated into key code translation and character translation. The curses2foo helper makes it easier to use them. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Message-id: 20190304210532.7840-1-samuel.thibault@ens-lyon.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11Reduce curses escdelay from 1s to 25msSamuel Thibault
By default, curses will only report single ESC key event after 1s delay, since ESC is also used for keypad escape sequences. This however makes users believe that ESC is not working. Reducing to 25ms provides good user experience, while still allowing 25ms for keypad sequences to get in, which should be enough. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Message-Id: <20190303172557.17139-1-samuel.thibault@ens-lyon.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-04ui/cocoa: Perform UI operations only on the main threadPeter Maydell
The OSX Mojave release is more picky about enforcing the Cocoa API restriction that only the main thread may perform UI calls. To accommodate this we need to restructure the Cocoa code: * the special OSX main() creates a second thread and uses that to call the vl.c qemu_main(); the original main thread goes into the OSX event loop * the refresh, switch and update callbacks asynchronously tell the main thread to do the necessary work * the refresh callback no longer does the "get events from the UI event queue and handle them" loop, since we now use the stock OSX event loop. Instead our NSApplication sendEvent method will either deal with them or pass them on to OSX All these things have to be changed in one commit, to avoid breaking bisection. Note that since we use dispatch_get_main_queue(), this bumps our minimum version requirement to OSX 10.10 Yosemite (released in 2014, unsupported by Apple since 2017). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-id: 20190225102433.22401-8-peter.maydell@linaro.org Message-id: 20190214102816.3393-8-peter.maydell@linaro.org
2019-03-04ui/cocoa: Subclass NSApplication so we can implement sendEventPeter Maydell
When we switch away from our custom event handling, we still want to be able to have first go at any events our application receives, because in full-screen mode we want to send key events to the guest, even if they would be menu item activation events. There are several ways we could do that, but one simple approach is to subclass NSApplication so we can implement a custom sendEvent method. Do that, but for the moment have our sendEvent just invoke the superclass method. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-id: 20190225102433.22401-7-peter.maydell@linaro.org Message-id: 20190214102816.3393-7-peter.maydell@linaro.org
2019-03-04ui/cocoa: Don't call NSApp sendEvent directly from handleEventPeter Maydell
Currently the handleEvent method will directly call the NSApp sendEvent method for any events that we want to let OSX deal with. When we rearrange the event handling code, the way that we say "let OSX have this event" is going to change. Prepare for that by refactoring so that handleEvent returns a flag indicating whether it consumed the event. Suggested-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-id: 20190225102433.22401-6-peter.maydell@linaro.org Message-id: 20190214102816.3393-6-peter.maydell@linaro.org
2019-03-04ui/cocoa: Move console/device menu creation code up in filePeter Maydell
Move the console/device menu creation code functions further up in the source file, next to the code which creates the initial menus. We're going to want to change the location we call these functions from in the next patch. This commit is a pure code move with no other changes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-id: 20190225102433.22401-5-peter.maydell@linaro.org Message-id: 20190214102816.3393-5-peter.maydell@linaro.org
2019-03-04ui/cocoa: Factor out initial menu creationPeter Maydell
Factor out the long code sequence in main() which creates the initial set of menus. This will make later patches which move initialization code around a bit clearer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-id: 20190225102433.22401-4-peter.maydell@linaro.org Message-id: 20190214102816.3393-4-peter.maydell@linaro.org
2019-03-04ui/cocoa: Use the pixman image directly in switchSurfacePeter Maydell
Currently the switchSurface method takes a DisplaySurface. We want to change our DisplayChangeListener's dpy_gfx_switch callback to do this work asynchronously on a different thread. The caller of the switch callback will free the old DisplaySurface immediately the callback returns, so to ensure that the other thread doesn't access freed data we need to switch to using the underlying pixman image instead. The pixman image is reference counted, so we will be able to take a reference to it to avoid it vanishing too early. In this commit we only change the switchSurface method to take a pixman image, and keep the flow of control synchronous for now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-id: 20190225102433.22401-3-peter.maydell@linaro.org Message-id: 20190214102816.3393-3-peter.maydell@linaro.org
2019-03-04ui/cocoa: Ensure we have the iothread lock when calling into QEMUPeter Maydell
The Cocoa UI should run on the main thread; this is enforced in OSX Mojave. In order to be able to run on the main thread, we need to make sure we hold the iothread lock whenever we call into various QEMU UI midlayer functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-id: 20190225102433.22401-2-peter.maydell@linaro.org Message-id: 20190214102816.3393-2-peter.maydell@linaro.org
2019-02-26authz: delete existing ACL implementationDaniel P. Berrange
The 'qemu_acl' type was a previous non-QOM based attempt to provide an authorization facility in QEMU. Because it is non-QOM based it cannot be created via the command line and requires special monitor commands to manipulate it. The new QAuthZ subclasses provide a superset of the functionality in qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor commands are converted to use the new QAuthZSimple data type instead in order to provide temporary backwards compatibility. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2019-02-22display: add -display spice-app launching a Spice clientMarc-André Lureau
Add a new display backend that will configure Spice to allow a remote client to control QEMU in a similar fashion as other QEMU display backend/UI like GTK. For this to work, it will set up Spice server with a unix socket, and register a VC chardev that will be exposed as Spice ports. A QMP monitor is also exposed as a Spice port, this allows the remote client fuller qemu control and state handling. - doesn't handle VC set_echo() - this doesn't seem a strong requirement, very few front-end use it - spice options can be tweaked with other -spice arguments - Windows support shouldn't be hard to do, but will probably use a TCP port instead - we may want to watch the child process to quit automatically if it crashed Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Victor Toso <victortoso@redhat.com> Message-id: 20190221110703.5775-12-marcandre.lureau@redhat.com [ kraxel: squash incremental fix ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21spice: use a default name for the serverMarc-André Lureau
If no -name is given, let's use a friendly "QEMU version" server name. This is sometime exposed on spice client side, for example on remote-viewer title. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Victor Toso <victortoso@redhat.com> Message-id: 20190221110703.5775-11-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21spice: do not stop spice if VM is pausedMarc-André Lureau
spice_server_vm_start/stop() was added to help migration state (commit f5bb039c6d97ef3e664094eab3c9a4dc1824ed73). However, a paused VM could keep running the spice server. This will allow a Spice client to keep sending commands to a spice chardev. This allows to stop/cont a VM from a Spice monitor port. Character devices (vdagent/usb/smartcard/..) should not read from Spice when the VM is paused. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Victor Toso <victortoso@redhat.com> Message-id: 20190221110703.5775-6-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21spice: merge options listsMarc-André Lureau
Passing several -spice options to qemu command line, or calling several time qemu_opts_set() will ignore all but the first option list. Since the spice server is a singleton, it makes sense to merge all the options, the last value being the one taken into account. This changes the behaviour from, for ex: $ qemu... -spice port=5900 -spice port=5901 -> port: 5900 to: $ qemu... -spice port=5900 -spice port=5901 -> port: 5901 (if necessary we could instead produce an error when an option is given twice, although this makes handling default values and such more complicated) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Victor Toso <victortoso@redhat.com> Message-id: 20190221110703.5775-5-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21spice: avoid spice runtime assertMarc-André Lureau
The Spice server doesn't like to be started or stopped twice . It aborts with: (process:6191): Spice-ERROR **: 19:29:35.912: red-worker.c:623:handle_dev_start: assertion `!worker->running' failed It's easy to avoid that situation since qemu spice_display_is_running tracks the server state. After the commit "spice: do not stop spice if VM is paused", it will be possible to pause and resume the VM, and this will call qemu_spice_display_start() twice. The easiest is to add a check for spice_display_is_running with this patch to avoid the assert. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Victor Toso <victortoso@redhat.com> Message-id: 20190221110703.5775-4-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21ui/gtk: Fix the license informationThomas Huth
The license information in this file is very messy. A short note at the beginning says GPL first, but the long boilerplate code then talks about "GNU Lesser General Public License version 2.0". First, there is no such version of the "GNU Lesser GPL", it only started with version 2.1. In version 2.0, it was still called "GNU Library GPL" instead. Second, you can easily get the license of this file wrong if you only quickly glance at the long boilerplate code. Anyway, looking at the text of the LGPL (see COPYING.LIB in the top directory), the license clearly states in section "3." that one should rather replace the license information with the GPL information in such a case of a mixture instead. Thus let's clean up the confusing statements and use the proper GPL text only. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 1550731902-28842-1-git-send-email-thuth@redhat.com [ kraxel: s/v2/v2+/ as requested by Daniel ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21sdl2: drop qemu_input_event_send_key_qcode callGerd Hoffmann
qkbd_state_key_event() does that for us. Fixes: 07333e1ca3 kbd-state: use state tracker for sdl2 Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: BALATON Zoltan <balaton@eik.bme.hu> Message-id: 20190208072744.10687-1-kraxel@redhat.com
2019-02-21spice: set device address and device display ID in QXL interfaceLukáš Hrázký
Calls the new SPICE QXL interface function spice_qxl_set_device_info to set the hardware address of the graphics device represented by the QXL interface (e.g. a PCI path) and the device display IDs (the IDs of the device's monitors that belong to this QXL interface). Also stops using the deprecated spice_qxl_set_max_monitors, the new interface function replaces it. Signed-off-by: Lukáš Hrázký <lhrazky@redhat.com> Message-Id: <20190215150919.8263-1-lhrazky@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21kbd-state: don't block auto-repeat eventsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190220100235.20914-1-kraxel@redhat.com
2019-02-18qapi: Generate QAPIEvent stuff into separate filesMarkus Armbruster
Having to include qapi-events.h just for QAPIEvent is suboptimal, but quite tolerable now. It'll become problematic when we have events conditional on the target, because then qapi-events.h won't be usable from target-independent code anymore. Avoid that by generating it into separate files. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190214152251.2073-6-armbru@redhat.com>
2019-02-05Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* cpu-exec fixes (Emilio, Laurent) * TCG bugfix in queue.h (Paolo) * high address load for linuxboot (Zhijian) * PVH support (Liam, Stefano) * misc i386 changes (Paolo, Robert, Doug) * configure tweak for openpty (Thomas) * elf2dmp port to Windows (Viktor) * initial improvements to Makefile infrastructure (Yang + GSoC 2013) # gpg: Signature made Tue 05 Feb 2019 17:34:42 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (76 commits) queue: fix QTAILQ_FOREACH_REVERSE_SAFE scsi-generic: Convert from DPRINTF() macro to trace events scsi-disk: Convert from DPRINTF() macro to trace events pc: Use hotplug_handler_(plug|unplug|unplug_request) i386: hvf: Fix smp boot hangs hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller hw/tricore/Makefile.objs: Create CONFIG_* for tricore hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc hw/moxie/Makefile.objs: Conditionally build moxie hw/hppa/Makefile.objs: Create CONFIG_* for hppa hw/cris/Makefile.objs: Create CONFIG_* for cris hw/alpha/Makefile.objs: Create CONFIG_* for alpha hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards hw/nios2/Makefile.objs: Conditionally build nios2 hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # qemu-deprecated.texi
2019-02-05ui: vnc: finish removing TABsPaolo Bonzini
Suggested-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05keymap: fix keyup mappingsGerd Hoffmann
It is possible that the modifier state on keyup is different from the modifier state on keydown. In that case the keycode lookup can end up with different keys in case multiple keysym -> keycode mappings exist, because it picks the mapping depending on modifier state. To fix that change the lookup logic for keyup events. Instead of looking at the modifier state check the key state and prefer a keycodes where the key is in "down" state right now. Fixes: abb4f2c965 keymap: consider modifier state when picking a mapping Buglink: https://bugs.launchpad.net/bugs/1738283 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1658676 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190122092814.14919-9-kraxel@redhat.com
2019-02-05keymap: pass full keyboard state to keysym2scancodeGerd Hoffmann
Pass the keyboard state tracker handle down to keysym2scancode(), so the code can fully inspect the keyboard state as needed. No functional change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190122092814.14919-8-kraxel@redhat.com
2019-02-05kbd-state: use state tracker for vncGerd Hoffmann
Use the new keyboard state tracked for vnc. Allows to drop the vnc-specific modifier state tracking code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190122092814.14919-7-kraxel@redhat.com
2019-02-05kbd-state: use state tracker for gtkGerd Hoffmann
Use the new keyboard state tracked for gtk. Allows to drop the gtk-specific modifier state tracking code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190122092814.14919-6-kraxel@redhat.com
2019-02-05sdl2: use only QKeyCode in sdl2_process_key()Gerd Hoffmann
Also: sdl2_process_key is never called with scon == NULL. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190122092814.14919-5-kraxel@redhat.com
2019-02-05kbd-state: use state tracker for sdl2Gerd Hoffmann
Use the new keyboard state tracked for sdl2. We can drop the modifier state tracking from sdl2. Also keyup code is simpler, the state tracker will take care to not send suspious keyup events to the guest. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190122092814.14919-4-kraxel@redhat.com
2019-02-05sdl2: remove sdl2_reset_keys() functionGerd Hoffmann
No users left, dead code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20190122092814.14919-3-kraxel@redhat.com
2019-02-05kbd-state: add keyboard state trackerGerd Hoffmann
Now that most user interfaces are using QKeyCodes it is easier to have common keyboard code useable by all user interfaces. This patch adds helper code to track the state of all keyboard keys, using a bitmap indexed by QKeyCode. Modifier state is tracked too, as separate bitmap. That makes checking modifier state easier. Likewise we can easily apply special handling for capslock & numlock (toggles on keypress) and ctrl + shift (we have two keys for that). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20190122092814.14919-2-kraxel@redhat.com [ kraxel: added license boilerplate header ] Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-02-05ui/egl-helpers: Augment parameter list of egl_texture_blend() to convey ↵Chen Zhang
scales of viewport This would help gtk-egl display showing scaled DMABuf cursor images when gtk window was zoomed. A default scale of (1.0, 1.0) was presumed for call sites where no scaling is needed. Signed-off-by: Chen Zhang <tgfbeta@me.com> Message-id: 23B229B3-3095-4DFB-8369-866784808D30@me.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-05ui/cocoa.m: Fix macOS 10.14 deprecation warningsBrendan Shanks
macOS 10.14 deprecated NSOnState/NSOffState in favour of NSControlStateValueOn/NSControlStateValueOff. Use the new constants, and #define them to the old ones when compiling against a pre-10.13 SDK. Also [NSGraphicsContext graphicsPort] is now deprecated, use [NSGraphicsContext CGContext] when available. Signed-off-by: Brendan Shanks <brendan@bslabs.net> Message-id: 20190201071225.20576-1-brendan@bslabs.net Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-05ui/sdl_keysym: Remove obsolete SDL1.2 related codeThomas Huth
sdl_keysym.h has only been included by sdl.c which has recently been removed recently with this commit: 0015ca5cbabe0b31d31610ddfaafd90a9e5911a4 ("ui: remove support for SDL1.2 in favour of SDL2") So we can drop this header file now completely, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 1549282241-23535-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-05ui: listen for GDK_SMOOTH_SCROLL eventsSergio Lopez
On Wayland, without grabbing focus, two-finger scrolling generates GDK_SMOOTH_SCROLL events instead of GDK_SCROLL_*, so listen for them. Signed-off-by: Sergio Lopez <slp@redhat.com> Message-id: 20190204120823.41333-1-slp@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-05ui: don't send any event if delta_y == 0Sergio Lopez
When the user raises their fingers from the touchpad, we may receive a GDK_SMOOTH_SCROLL event with delta_y == 0. Avoid generating a WHEEL_UP event in this situation. Signed-off-by: Sergio Lopez <slp@redhat.com> Message-id: 20190204122043.43007-1-slp@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-01ui: remove support for SDL1.2 in favour of SDL2Daniel P. Berrangé
SDL1.2 was deprecated in the 2.12.0 release with: commit e52c6ba34149b4f39c3fd60e59ee32b809db2bfa Author: Daniel P. Berrange <berrange@redhat.com> Date: Mon Jan 15 14:25:33 2018 +0000 ui: deprecate use of SDL 1.2 in favour of 2.0 series The SDL 2.0 release was made in Aug, 2013: https://www.libsdl.org/release/ That will soon be 4 + 1/2 years ago, which is enough time to consider the 2.0 series widely supported. Thus we deprecate the SDL 1.2 support, which will allow us to delete it in the last release of 2018. By this time, SDL 2.0 will be more than 5 years old. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180115142533.24585-1-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> It is thus able to be removed in the 3.1.0 release. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20180822131554.3398-4-berrange@redhat.com> [ kraxel: rebase ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-24input-linux: customizable grab toggle keysRyan El Kochta
This patch adds a new option to the input-linux object: grab-toggle=[key-combo] The key combination can be one of the following: * ctrl-ctrl * alt-alt * meta-meta * scrolllock * ctrl-scrolllock The user can pick any of these key combinations. The VM's grab of the evdev device will be toggled when the key combination is pressed. Any invalid setting will result in an error. No setting will result in the current default of ctrl-ctrl. The right and left ctrl key both work for Ctrl-Scrolllock. If scrolllock is selected as one of the grab-toggle keys, it will be entirely disabled and not passed to the guest at all. This is to prevent enabling it while attempting to leave or enter the VM. On the host, scrolllock can be disabled using xmodmap. First, find the modifier that Scroll_Lock is bound to: $ xmodmap -pm Then, remove Scroll_Lock from it, replacing modX with the modifier: $ xmodmap -e 'remove modX = Scroll_Lock' If Scroll_Lock is not bound to any modifier, it is already disabled. To save the changes, add them to your xinitrc. Ryan El Kochta (1): input-linux: customizable grab toggle keys v5 Signed-off-by: Ryan El Kochta <relkochta@gmail.com> Message-id: 20190123214555.12712-2-relkochta@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-21egl-helpers.h: do not depend on X11 Window type, use EGLNativeWindowTypeAlexander Kanavin
It was assumed that mesa provides the necessary X11 includes, but it is not always the case, as it can be configured without x11 support. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190116113751.17177-1-alex.kanavin@gmail.com [ kraxel: codestyle fix (long line) ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-21vnc: detect and optimize pageflipsGerd Hoffmann
When size and format of the display surface stays the same we can just tag the guest display as dirty and be done with it. There is no need need to resize the vnc server display or to touch the vnc client dirty bits. On the next refresh cycle vnc_refresh_server_surface() will check for actual display content changes and update the client dirty bits as needed. The desktop resize and framebuffer format notifications to the vnc client will be skipped too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190116101049.8929-1-kraxel@redhat.com
2019-01-21sdl: add support for high resolution window iconDaniel P. Berrangé
Modern desktop environments can render icons at very large sizes, especially with high DPI screens. Providing a 32x32 pixel bitmap is nowhere near sufficient anymore. When displayed in GNOME shell the QEMU icon looks awful, having been scaled up to at least x4 its base size. This is compounded by the fact that the BMP file doesn't do transparency, so while we've removed white pixels, we still have anti-aliased nearly-white pixels which make the logo look appalling on black backgrounds. Loading a high resolution PNG icon addresses both problems, but requires use of the extra SDL2_image library. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190110120047.25369-4-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-21ui: fix icon display for GTK frontend under GNOME Shell with WaylandDaniel P. Berrangé
The icon associated with a GtkWindow is just a hint to window managers and not all of them will honour it. Some will instead want to show the icon listed by the .desktop file. The desktop file is located based on the application ID, which is set using g_set_prgname. QEMU has not historically provided a desktop file or set its app ID, so it got a broken icon in GNOME shell, which is now fixed. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190110120047.25369-3-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-21ui: install logo icons to $prefix/share/iconsDaniel P. Berrangé
QEMU currently installs logos to $prefix/share/qemu/ which means no GUI toolkit or applications can find them by default. The accepted standards for desktop applications declare that application logos / icons should be installed under $prefix/share/icons, so use this directory location. Pre-rendered icons are provided at the standard sizes expected for GUI applications, along with the scalable SVG, to ensure maximum portability. The PNGs are rendered from the SVG using inkscape, however, this is not wired up into the default make rules to avoid requiring inkscape as a mandatory tool in build systems / developer workstations. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190110120047.25369-2-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-14Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/input-20190111-pull-request' into staging input: avoid malloc for mouse events # gpg: Signature made Fri 11 Jan 2019 14:26:44 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/input-20190111-pull-request: input: avoid malloc for mouse events Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-11avoid TABs in files that only contain a fewPaolo Bonzini
Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11qemu/queue.h: simplify reverse access to QTAILQPaolo Bonzini
The new definition of QTAILQ does not require passing the headname, remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11qemu/queue.h: typedef QTAILQ headsPaolo Bonzini
This will be needed when we change the QTAILQ head and elem structs to unions. However, it is also consistent with the usage elsewhere in QEMU for other list head structs (see for example FsMountList). Note that most QTAILQs only need their name in order to do backwards walks. Those do not break with the struct->union change, and anyway the change will also remove the need to name heads when doing backwards walks, so those are not touched here. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11input: avoid malloc for mouse eventsGerd Hoffmann
There is no reason to allocate mouse events using malloc, we can allcoate them from stack instead, save a few cpu cycles and make the code more readable with c99 initializers. Suggested-by: FelixYao <felix.yzg@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181210140808.26794-1-kraxel@redhat.com
2019-01-10Merge remote-tracking branch 'remotes/kraxel/tags/ui-20190110-pull-request' ↵Peter Maydell
into staging ui: bugfixes, drop keymap include support, drop dead code. # gpg: Signature made Thu 10 Jan 2019 08:47:10 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20190110-pull-request: spice: Remove unused include keymaps: drop support for include files keymaps: remove common include keymaps: drop nl-be map keymaps: remove modifiers include ui/console: Remove qemu_create_display_surface_guestmem() configure: bump spice-server required version to 0.12.5 egl-headless: add egl_create_context Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 01:31:07 +0000